Is Hyperion Essbase is working with ODI 11g under different Domain Range?

Hi All,
I installed ODI 11.1.1.3 with IP(172.x.8.21) and Hyperion Essbase (172.x.0.36). With different domain Range ODI(172.x.*8*.21) and Essbase(172.x.*0*.21) so will it work under different IP Domain ranges from 8 to 0?
Cause i was trying to develop Physical Data server for Essbase and i was not able to view Application Schema and other object in drop down list like: Catalog, Database Scheam etc.
Evening i am providing Correct Domain name, port and user name & passowrd. even i tried with providing direct IP address.
Server Details :
1- Hyperion Essbase server Name: Essbaseserver
2- Port: 1423
3- admin
4- xxxxxx
as u know guys Test Connection button is not working for Essbase its only works for RDBMS in ODI.
looking for your help.
Thank u

Yes it works though the dropdown will not be automatically populated and you can't click the test button as that is mainly for technologies that use JDBC, you will need to manually enter the app/db
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

How to make in/out Port vis work with COM interface under different windows versions?

Hello!
I know that the accessHW is necessary for it, so I downlaoded the
this file from the homepage of NI, but there are always some problems
with it.
My program should get the the voltage impulse between
the pins DTR and RTS of a COM interface. After
I installed accessHW under winNT, the voltage between them changed
automatically from 0 mV to about 24 mV , and program
worked well . But this way does not work under Win98 and Win2000,
and this voltage is always 0 so that the device can not make any voltage
impulse.
Could someone give me a software solution for it? Thanks!
P.S:The version of the labview I use is 6.1.
Le

You shouldn't depend on a voltage difference between the tow pins unless you need something like 24 volts and not 24 millvolts. All of the signal lines are referenced to ground and the signal lines usually swing between -3 to -12 and +3 to +12 volts. If you truly saw a 24 millivolt difference between two signal leads, then all that means is that they are both at the same logic state. A difference of 24 millivolts is not much and has to do with the UART in your computer and not accessHW I believe though maybe what happened is that the difference is 24mv when both are logic "1" and less when logic "0" or vice versa. If your device requires power from the serial port, then what you'll have to do is control the signal lines in your program and I
would recomend VISA to do that instead of inport/outport. And check the voltage requirements of your device. If this is a device you designed, it should be designed for the lower voltages on new pc's and laptops. In other words, I would depend on 3 volt signals instead of 12. There are numerous references to either RS-232 or EIA-232 on the web. I think a review of the electrical specifications is needed.

Unable to install the Demonstration Environment with ODI 11g

Hi,
Can someone please help me with Demonstration environment installation with ODI 11g on a windows system.
I have downloaded the zipped file from the OTN site.
I am unable to understand the installation steps in the user guide.Posting them for your reference.
"To manually install the Demonstration environment, do the following:
Unzip oracledi-demo.zip in the ODI_HOME folder.
Verify that the JAVA_HOME environment variable is set and contains the path of a JVM suitable for Oracle Data Integrator.
If this variable is not set correctly, set it to a valid java machine location.
For example:
On UNIX operating systems:
setenv JAVA_HOME/usr/local/java
On Windows operating systems:
Set the JAVA_HOME variable graphically "
Regards,
Lovey Saxena

Hi;
Did you try to start installation? Your Java_Home could be avaliable on your env settings, so you dont need to set this for installation. If its fails please try to use this syntax:
Set JAVA_HOME=C:\xxx
Regard
Helios

10g Primary database work with a 11g Standby database

Can a 10g Primary database work with a 11g Standby database?
The existing database is Oracle 10g and I don't want to upgrade it. But I really need the Real-time Query feature of 11g Physical Standby Database.
Can they work together?

Hi,
do you have any proof?
I never find any proof in Oracle Docs.Kindly refer to doc's and check things it states Primary and Standby Servers Versions must be same - similar to that you can find very much clear. That is more than enough for proof else Test it you will find your self...;-).
- Pavan Kumar N
Oracle 9i/10g - OCP
http://oracleinternals.blogspot.com/

Hyperion Essbase QAT Menu with Excel 2007

I just upgraded to Hyperion Essbase 11.1.1.3 and I recently upgraded to Excel 2007. Moving to XL2007 made the Essbase add-in two levels deep in the ribbon so I wanted to move this to the Quick Access Toolbar (QAT). I found a great tool to develop QAT menus authored by [url http://www.rondebruin.nl/qat.htm]Ron Debruin.
I took his code and customized it to work with the Hyperion commands. Picture of menu here: http://i.imgur.com/X7zFS.jpg
Everything worked great for a few month for both myself and about 75 coworkers but once we upgraded to Essbase 11.1.1.3 from 7, the menu macros stopped working for almost everyone except for myself and a few others.
I set this macro in the xlstart folders so that it opens with excel. The QAT menu still appears for everyone, but when selecting any of the menu items to run, nothing runs.
Example: When running
Sub MyMacro21()
 Call EssMenuVConnect
End Subfrom the custom QAT menu, nothing happens. What should occur is a popup login for Hyperion. I've even tried to run the code outside of the QAT menu and it does not work so this leads me to believe something is wrong with my Hyperion code. Now mind you, this work fine on my machine.
I'm unable to determine the cause for the macro to not work. Any help or troubleshooting pointers would be appreciated.
Here is the code that I'm using.
Thanks in advance for any help.
-Risk
First Module (Hyperion Code and subs for the QAT menu)
Option Explicit
Option Private Module
Declare Function EssMenuVRetrieve Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVKeepOnly Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVZoomIn Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVZoomOut Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVPivot Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVWizard Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVQueryDesigner Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVFlashBack Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVOptions Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVMemberSelection Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVCurrencyReport Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVCascade Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVRetrieveLock Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVLock Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVUnlock Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVSend Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVCalculation Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVConnect Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVDisconnect Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVDatalessNav Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVLinkedObjects Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVRemoveOnly Lib "ESSEXCLN.XLL" () As Long
Declare Function EssMenuVLaunchTableau Lib "ESSEXCLN.XLL" () As Long
' The following prototype declares the VBA-specific functions
Declare Function EssVGetHctxFromSheet Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant) As Long
Declare Function EssVGetMemberInfo Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal mbrName As Variant, ByVal action As Variant, ByVal aliases As Variant) As Variant
Declare Function EssVFreeMemberInfo Lib "ESSEXCLN.XLL" (ByRef memInfo As Variant) As Long
Declare Function EssVFreeDataPoint Lib "ESSEXCLN.XLL" (ByRef Info As Variant) As Long
' The following constants are suitable as actions
' for the EssVGetMemberInfo function
Const EssChildLevel = 1
Const EssDescendentLevel = 2
Const EssBottomLevel = 3
Const EssSiblingLevel = 4
Const EssSameLevel = 5
Const EssSameGenerationLevel = 6
Const EssCalculationLevel = 7
Const EssParentLevel = 8
Const EssDimensionLevel = 9
' The following prototypes declare the Visual Basic
' Extended Spreadsheet macro-equivalent functions
Declare Function EssVCalculate Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal calcScript As Variant, ByVal synchronous As Variant) As Long
Declare Function EssVCancelCalc Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant) As Long
Declare Function EssVCascade Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal range As Variant, ByVal selection As Variant, ByVal path As Variant, ByVal prefix As Variant, ByVal suffix As Variant, ByVal level As Variant, ByVal openFile As Variant, ByVal copyFormats As Variant, ByVal overwrite As Variant, ByVal listFile As Variant) As Long
Declare Function EssVCell Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ParamArray memberList() As Variant) As Variant
Declare Function EssVConnect Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal userName As Variant, ByVal password As Variant, ByVal server As Variant, ByVal application As Variant, ByVal database As Variant) As Long
Declare Function EssVDisconnect Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant) As Long
Declare Function EssVFlashBack Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant) As Long
Declare Function EssVGetCurrency Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant) As Variant
Declare Function EssVGetDataPoint Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal cell As Variant, ByVal range As Variant, ByVal aliases As Variant) As Variant
Declare Function EssVGetGlobalOption Lib "ESSEXCLN.XLL" (ByVal item As Long) As Variant
Declare Function EssVGetSheetOption Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal item As Variant) As Variant
Declare Function EssVKeepOnly Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal range As Variant, ByVal selection As Variant) As Long
Declare Function EssVRemoveOnly Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal range As Variant, ByVal selection As Variant) As Long
Declare Function EssVPivot Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal range As Variant, ByVal startPoint As Variant, ByVal endPoint As Variant) As Long
Declare Function EssVRetrieve Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal range As Variant, ByVal lockFlag As Variant) As Long
Declare Function EssVSendData Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal range As Variant) As Long
Declare Function EssVSetCurrency Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal currencyIdentifier As Variant) As Long
Declare Function EssVSetGlobalOption Lib "ESSEXCLN.XLL" (ByVal item As Long, ByVal globalOption As Variant) As Long
Declare Function EssVSetSheetOption Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal item As Variant, ByVal sheetOption As Variant) As Long
Declare Function EssVUnlock Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant) As Long
Declare Function EssVZoomIn Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal range As Variant, ByVal selection As Variant, ByVal level As Variant, ByVal across As Variant) As Long
Declare Function EssVZoomOut Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal range As Variant, ByVal selection As Variant) As Long
Declare Function EssVSetMenu Lib "ESSEXCLN.XLL" (ByVal setMenu As Boolean) As Long
Declare Function EssVGetStyle Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal styleType As Variant, ByVal dimName As Variant, ByVal item As Long) As Variant
Declare Function EssVSetStyle Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal styleType As Variant, ByVal dimName As Variant, ByVal item As Long, ByVal newValue As Variant) As Long
Declare Function EssVLoginSetPassword Lib "ESSEXCLN.XLL" (ByVal sheetName As Variant, ByVal newPassword As Variant, ByVal oldPassword As Variant, ByVal server As Variant, ByVal userName As Variant) As Long
Declare Function EssVSetSKUMouse Lib "ESSEXCLN.XLL" (ByVal fSKUWithMouse As Variant) As Long
Sub MyMacro1()
 Call EssMenuVRetrieve
End Sub
Sub MyMacro2()
 Call EssMenuVKeepOnly
End Sub
Sub MyMacro3()
 Call EssMenuVRemoveOnly
End Sub
Sub MyMacro4()
 Call EssMenuVZoomIn
End Sub
Sub MyMacro5()
 Call EssMenuVZoomOut
End Sub
Sub MyMacro7()
 Call EssMenuVDatalessNav
End Sub
Sub MyMacro9()
 Call EssMenuVLinkedObjects
End Sub
Sub MyMacro12()
 Call EssMenuVFlashBack
End Sub
Sub MyMacro13()
 Call EssMenuVOptions
End Sub
Sub MyMacro14()
 Call EssMenuVMemberSelection
End Sub
Sub MyMacro15()
 Call EssMenuVCurrencyReport
End Sub
Sub MyMacro17()
 Call EssMenuVLock
End Sub
Sub MyMacro18()
 Call EssMenuVUnlock
End Sub
Sub MyMacro19()
 Call EssMenuVSend
End Sub
Sub MyMacro20()
 Call EssMenuVCalculation
End Sub
Sub MyMacro21()
 Call EssMenuVConnect
End Sub
Sub MyMacro22()
 Call EssMenuVDisconnect
End Sub
Sub MyMacro23()
 Call SHRetrieveRetain
End Sub
Sub MyMacro24()
 Call WBRetrieveRetain
End Sub
Sub MyMacro25()
 Call SHRetrieveSuppress
End Sub
Sub MyMacro26()
 Call WBRetrieveSuppress
End SubSecond Module (this is Ron Debruin's QAT code)
Option Explicit
Option Private Module
'TIP:
'After you click on "Edit Menu" in the menu you can change the button image.
'Right click on the QAT and choose Customize Quick Access Toolbar.
'In the “Choose commands from” dropdown choose Macros and in the
'Customize Quick Access Toolbar dropdown choose "For My Add-in.xlam".
'Select the RDBDisplayPopUp macro and press the Modify button to change the icon.
Sub WBCreatePopUp()
 Dim MenuSheet As Worksheet
 Dim MenuItem As Object
 Dim SubMenuItem As CommandBarButton
 Dim Row As Integer
 Dim MenuLevel, NextLevel, MacroName, Caption, Divider, FaceId
 ' Location for menu data
 Set MenuSheet = ThisWorkbook.Sheets("MenuSheet")
 ' Make sure the menus aren't duplicated
 Call WBRemovePopUp
 ' Initialize the row counter
 Row = 5
 ' Add the menu, menu items and submenu items using
 ' data stored on MenuSheet
 ' First we create a PopUp menu with the name of the value in B2
 With application.CommandBars.Add(ThisWorkbook.Sheets("MenuSheet"). _
 range("B2").Value, msoBarPopup, False, True)
 Do Until IsEmpty(MenuSheet.Cells(Row, 1))
 With MenuSheet
 MenuLevel = .Cells(Row, 1)
 Caption = .Cells(Row, 2)
 MacroName = .Cells(Row, 3)
 Divider = .Cells(Row, 4)
 FaceId = .Cells(Row, 5)
 NextLevel = .Cells(Row + 1, 1)
 End With
 Select Case MenuLevel
 Case 2 ' A Menu Item
 If NextLevel = 3 Then
 Set MenuItem = .Controls.Add(Type:=msoControlPopup)
 Else
 Set MenuItem = .Controls.Add(Type:=msoControlButton)
 MenuItem.OnAction = ThisWorkbook.Name & "!" & MacroName
 End If
 MenuItem.Caption = Caption
 If FaceId <> "" Then MenuItem.FaceId = FaceId
 If Divider Then MenuItem.BeginGroup = True
 Case 3 ' A SubMenu Item
 Set SubMenuItem = MenuItem.Controls.Add(Type:=msoControlButton)
 SubMenuItem.Caption = Caption
 SubMenuItem.OnAction = ThisWorkbook.Name & "!" & MacroName
 If FaceId <> "" Then SubMenuItem.FaceId = FaceId
 If Divider Then SubMenuItem.BeginGroup = True
 End Select
 Row = Row + 1
 Loop
 End With
End Sub
Sub RDBDisplayPopUp()
 On Error Resume Next
 application.CommandBars(ThisWorkbook.Sheets("MenuSheet").range("B2").Value).ShowPopup
 On Error GoTo 0
End Sub
Sub EditMenu()
 ThisWorkbook.IsAddin = False
End Sub
Sub WBRemovePopUp()
 On Error Resume Next
 application.CommandBars(ThisWorkbook.Sheets("MenuSheet").range("B2").Value).Delete
 On Error GoTo 0
End SubThird Module (some custom Essbase comands to toggle between "retain formula options" and "suppress zero options")
Option Explicit
Sub WBRetrieveRetain()
Dim sh As Worksheet, HidShts As New Collection 'to handle hidden sheets
 For Each sh In ActiveWorkbook.Worksheets
 If Not sh.Visible Then
 HidShts.Add sh
 sh.Visible = xlSheetVisible
 End If
 Next sh
For Each sh In Worksheets
 Sheets(sh.Name).Activate
 'Turn On Retain and Turns off Suppress and double clicks
 If EssVGetSheetOption(Empty, 6) = True Or _
 EssVGetSheetOption(Empty, 7) = True Then
 Call EssVSetSheetOption(Empty, 6, False)
 Call EssVSetSheetOption(Empty, 7, False)
 End If
 If EssVGetGlobalOption(1) = True Or _
 EssVGetGlobalOption(2) = True Then
 Call EssVSetGlobalOption(1, False)
 Call EssVSetGlobalOption(2, False)
 End If
 Call EssVSetSheetOption(Empty, 11, True)
 Call EssVSetSheetOption(Empty, 21, True)
 Call EssVSetSheetOption(Empty, 22, True)
Next
 For Each sh In HidShts
 sh.Visible = xlSheetHidden
 Next sh
End Sub
Sub SHRetrieveRetain()
 'Turn On Retain and Turns off Suppress and double clicks
 If EssVGetSheetOption(Empty, 6) = True Or _
 EssVGetSheetOption(Empty, 7) = True Then
 Call EssVSetSheetOption(Empty, 6, False)
 Call EssVSetSheetOption(Empty, 7, False)
 End If
 If EssVGetGlobalOption(1) = True Or _
 EssVGetGlobalOption(2) = True Then
 Call EssVSetGlobalOption(1, False)
 Call EssVSetGlobalOption(2, False)
 End If
 Call EssVSetSheetOption(Empty, 11, True)
 Call EssVSetSheetOption(Empty, 21, True)
 Call EssVSetSheetOption(Empty, 22, True)
End Sub
Sub SHRetrieveSuppress()
 'Turn Off Retain and Turns on Suppress
 If EssVGetSheetOption(Empty, 11) = True Or _
 EssVGetSheetOption(Empty, 21) = True Or _
 EssVGetSheetOption(Empty, 22) = True Then
 Call EssVSetSheetOption(Empty, 11, False)
 Call EssVSetSheetOption(Empty, 21, False)
 Call EssVSetSheetOption(Empty, 22, False)
 End If
 Call EssVSetSheetOption(Empty, 6, True)
 Call EssVSetSheetOption(Empty, 7, True)
End Sub
Sub WBRetrieveSuppress()
Dim sh As Worksheet, HidShts As New Collection 'to handle hidden sheets
 For Each sh In ActiveWorkbook.Worksheets
 If Not sh.Visible Then
 HidShts.Add sh
 sh.Visible = xlSheetVisible
 End If
 Next sh
For Each sh In Worksheets
 Sheets(sh.Name).Activate
 'Turn Off Retain and Turns on Suppress
 If EssVGetSheetOption(Empty, 11) = True Or _
 EssVGetSheetOption(Empty, 21) = True Or _
 EssVGetSheetOption(Empty, 22) = True Then
 Call EssVSetSheetOption(Empty, 11, False)
 Call EssVSetSheetOption(Empty, 21, False)
 Call EssVSetSheetOption(Empty, 22, False)
 End If
 Call EssVSetSheetOption(Empty, 6, True)
 Call EssVSetSheetOption(Empty, 7, True)
Next
 For Each sh In HidShts
 sh.Visible = xlSheetHidden
 Next sh
End SubExcel Object Code
Option Explicit
Private Sub CommandButton1_Click()
 Call WBCreatePopUp
 MsgBox "Click on the button in the QAT to see if your menu is correct.", vbOKOnly, "Favorite Macro Menu"
End Sub
Private Sub CommandButton2_Click()
 Call WBCreatePopUp
 range("A1").Select
 ThisWorkbook.IsAddin = True
 ThisWorkbook.Save
End Sub
Private Sub CommandButton3_Click()
 ThisWorkbook.IsAddin = True
 ThisWorkbook.Saved = True
End Sub
Option Explicit
Private Sub Workbook_Open()
 Call WBCreatePopUp
End Sub
Private Sub Workbook_BeforeClose(Cancel As Boolean)
 Call WBRemovePopUp
End Sub

Hi Mathieu,
As per support matrix documentation, Essbase 7.1.3 is not supported with Excel 2007.
You may have to upgrade to client version 7.1.6.7 which supports Excel 2007.
Thanks,
Raja

Can OBIEE 10.1.3.4 work with Oracle 11g 64bit?

I Installed Oracle 11 g 64bit with JDK 64bit on my windows 7 Home Premium 64bit machine . After this i installed OBIEE 10.1.3.4 .
Now OBIEE needs 32 bit JDK.
How do i solve this?
Can OBIEE 10.1.3.4 be used with oracle 11g 64 bit edition??

First i installed Oracle 10g on my windows 7 home premium 64 bit .
Then i installed OBIEE 10.1.3.4 on my machine
But then there were some problems cropping up and i wasn't able to use OBIEE 10.1.3.4 with windows 7home premium 64 bit machine.
I then removed both oracle 10g and OBIEE 10.1.3.4 from my machine.
Then i installed oracle 11g 64bit and then OBIEE 10.1.3.4 . But again it dint work
Can anyone help?

ODBC and OCI not working with OBIEE 11g Client on 64 bit machine

Hi,
I have Installed OBIEE 11g client (Admin tool) on Windows XP Professional 64 bit machine.. I have Installed 11g database on the same machine but while importing Metadata using admin tool. getting "Connection has failed" error message... Can someone tell me whats the issue..
ODBC and OCI works fine with OBIEE 10g Admin..

Hi,
Oracle_BI1\network\admin folder gets installed with full obiee 11g Installlation and I have installed only 11g client as I have OBIEE 10g already Installed on my machine..
Installation is as follows:
ORACLE 11g CLIENT Installation is as follows:
C:\Program Files\Oracle Business Intelligence Enterprise Edition Plus Client
ORACLE 10g Installation is as follows:
C Drive:
ORACLE BI
ORACLE BI Data ( everything is working with this)
latest Log Info is as follows:
[2012-02-02T11:05:00.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 24fc] [nQSError: 16001] ODBC error state: 08004 code: 12154 message: [Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified.
[2012-02-02T11:05:16.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 2f3c] [nQSError: 16001] ODBC error state: 08004 code: 12154 message: [Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified.
[2012-02-02T11:32:53.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 2f3c] [nQSError: 16001] ODBC error state: 08004 code: 12154 message: [Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified.

Odi 11g under win 7 issue

Hello.
I have a problem with installation ODI 11g (11.1.1.3.0) under Widows 7. When I start setup.exe (run as Administrator), Oracle Universal Installer starts, but needs to specify path to JDK
"Preparing to launch Oracle Universal Installer from C:\Users\PETRCH~1\AppData\Local\Temp\OraInstall2010-11-05_09-47-31AM. Please wait ...
Please specify JDK location ( Ex. /home/jdk ), <location>/bin/java should exist:"
When I input a correct path, installer looks like working but suddenly installator window closes without any error.
Does anybody have the same problem?
And my other question is, does anybody install ODI 10g under Windows 7?
Thanks for advices.
Petr.

Hi,
I experienced the same issue.
if you are running seven on a 64bits , please be sure you specify a 64 bit jdk path. Oracle universal installer should then work.
Then when launching ODI, specify a 32 bit JDK as ODI is 32 bits...
Hope this helps,
Olivier

Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

Hi,
The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
The same Webcam works just fine with Lync 2013 under Windows 7.
Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
Thanks

Hi,
According to your description, it may be caused by driver.
You can try to install the latest version of Display Driver to fix the display issue.
Since there is no driver for Windows 8.1, I suggest you wait for updating.
You can also post a case on Windows 8 forum, thank you for your understanding:
http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Working with XServe in Active Directory Domain

I'm starting to lose my mind. Is anyone else working with an XServe in a strictly Active Directory domain? Im essentially using it as an FTP and SMB file server. All sorts of weird stuff happens out of the blue like, all of a sudden today I can no longer log in to the Local Admin account no matter what I do (I've reset the password, tried logging in automatically). Root account no longer lets me in...the only way I can get in is to log in as a Domain admin YET, if I log into the server through Workgroup Manager or Server Admin with the credentials for Local Admin, I get in just fine. What gives? It feels like there's major permissions screwiness going on...
And earlier, file sharing permissions just weren't working no matter what permissions I gave to who. It is driving me nuts.
Anyway, if anyone has ANY wisdom to impart re: using XServe to manage files, FTP, etc... in Active Directory I would love to hear it: tips, stories, experiences, resources, how to's etc...
Thanks

This area is more for the XServe hardware, you need to post in the Mac OS X Server software section, as the OS can run on more than just hardware, hence the software category.

Do user-created recovery disks work with replacement HDD of different capacity?

The original Seagate 250GB SATA HDD in my Pavilion G60-214EM notebook has completely failed (BIOS and other Windows machines cannot even see it). I replaced it with a Samsung 160GB SATA HDD but Recovery Manager on my user-created (DVD-R) recovery disk consistently fails at 2% of "Reformatting the Windows partition of your hard disk drive". If I look at the resulting partitions from another machine I see a 10.61 GB NTFS 'RECOVERY' partition, an empty active primary NTFS partition of 37.12 GB and 101.31 GB still unallocated.
Should the user-created recovery disks work if the replacement disk drive is smaller capacity than the original?
Should they work with a larger capacity replacement drive?
If not, can HP provide recovery disks that will work with a different capacity HDD?
Thanks,
--A

Hi, I am the same predicament as you are From my experience thus far, the replacement disk drive space needs to be bigger or equal to the original HD space. (e.g.. I had a 640 gb OEM HD, I cannot install or factory reset the new 500 gb WD HD because it says its too small...)
As for question 2, I am going to try to get a 1TB hard drive, though I don't know due to the prices and such. Will post back if I do.
Question 3: I do not know, someone else may be more knowledgeable:/
Hope this helps!

Work with a table in different schema depending on the user group

I have 2 groups of users user_group1, user_group2 and also two different schemas schema_group1,schema_group2 containing the same table names with a different content.
Now, i have to write a stored procedure which takes user name as input and depending on which group the user belongs to, i want to work with table in that user_group schema. i.e.(if user_group1 then "schema_group1"."table". if user_group2 then "schema_group2"."table" )
i tried to set schema using dynamic sql but it seems that the schema is changing only after the end of the stored procedure.

yes, i do maintain a table to map user groups with schema name.
i have two tables:
table-1: USERS(user_name, group_name)
table-2: GET_SCHEMA(group_name, schema_name)
// Just to make it simple(for testing purpose), i am directly assigning the schema_name inside the stored procedure.
CREATE PROCEDURE "TEJA"."RETURN_SCHEMA_OF_USER" (IN IN_USER_NAME VARCHAR(30))
LANGUAGE SQLSCRIPT
AS
BEGIN
     DECLARE VAR_USER_GROUP VARCHAR(20);
     --DECLARE VAR_SCHEMA_NAME VARCHAR(20);
     DECLARE SCHEMA_NAME VARCHAR(20);
     DECLARE SQL_STATEMENT VARCHAR(200);
     DECLARE VAR_TEMP VARCHAR(200);
     SELECT USER_GROUP INTO VAR_USER_GROUP FROM "TEJA"."USERS" WHERE USER_NAME =      IN_USER_NAME;
     --SELECT VAR_USER_GROUP AS USER_GRP FROM DUMMY;
     -- SELECT GROUP_NAME INTO VAR_SCHEMA_NAME FROM GET_SCHEMA WHERE GROUP_NAME =      VAR_USER_GROUP;
     -- Instead of above statement, i am directly assigning the schema_name below
     IF VAR_USER_GROUP = 'UNION' THEN
            SCHEMA_NAME := 'USER_UNION';
     ELSE
            SCHEMA_NAME := 'USER_CORPORATE';
     END IF;
     SQL_STATEMENT := 'SELECT * FROM "'||:SCHEMA_NAME||'"."USER_DETAILS"';
     --I have USER_DETAILS table in both the schemas.
     --SQL_STATEMENT := 'SET SCHEMA ' || :SCHEMA_NAME || ' ';
     --sets the schema after the stored procedure is executed.
     EXECUTE IMMEDIATE SQL_STATEMENT;
END;
This dynamic sql statement does the job for me, but i don't want to use dynamic sql in all my stored procedures. I need this kind of functionality in almost all of my stored procedures. So, i am looking for a better approach. I really appreciate your valuable inputs.
Thank you

Loading a combobox with data from a different domain

I have filled in a combobox with values from an .asp page and
have used it
successfully. The problem is that if the flash file is ran
from a different
domain from the load location, the combobox doesn't get
filled in (as
apposed to the error if I ran it off of my drive).
datafeed.asp spits out the appropriate stuff for the AddItems
function to
read correctly. (as I has said, it does work). The combobox
gets filled in
the development environment (Macromedia Flash MX Professional
2004) as well
as flash player.
But when I upload it to one of my other websites, the data is
never
retrieved. Even though that the webserver containing the data
feed, the
webserver hosting the flash file and my machine can all read
datafeed.asp.
Am I missing a setting that allows a flash file to read data
from another
domain?
The following code has been changed for security reasons. But
believe me it
works in its original format.
myData = new LoadVars();
myData.onLoad = AddItems;
myData.load("
http://www.mydomain.com/datafeed.asp")
function AddItems() {
for (i=0; i<numItems; i++) {
var ProductID = eval("myData.ProductID"+i);
var ProductName = eval("myData.ProductName"+i);
var ProductSale = eval("myData.ProductSale"+i);
var DataProvider = { productid
roductID, productsale
roductSale };
_root.application.chooseproducts.prodlist_cb.addItem(ProductName,
DataProvider);
Thank You,
Julian

not sure, but this might be what you need...
//allow loading of files from domain
System.security.allowDomain("
http://www.mydomain.com");

Unable to protect 2 computers with same name, but different Domains

DPM 2012 R2 and UR2
All DC:s and servers are 2012 R2 + Latest patches.
ad.A.com has full 2 Way trust with ad.B.com. (Different forrest)
DPM Server is DPM.ad.A.com
Computer EXCH.ad.A.com is protected without problem
Computer SQL.ad.B.com is protected without problem
When I try to attach agent from EXCH.ad.B.com I'll get problems.
Error 346: DPM is unable to retrieve the configuration information from EXCH.ad.B.com
I'll guess this has to do with same name of computer, although in different domains. Is this as Designed, or is it a defect?
/Peter

please try a different User to attach/install the DPM Agent.
if this is not the solution, you maybe have a Problem with wmi, try and test with wbemtest
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Essbase SSO Token with OBIEE 11g

Has anyone had success is setting up SSO token security in OBIEE 11g for Essbase. I have followed the steps in the documents of 11.1.1.x and still am not getting users to authenticate against the cube I am using. When I log in as one of those users, and view the report I get a invalid user.

Hi J.A.M.
If you got this working, please can you share the steps?
Thanks!

Is Hyperion Essbase is working with ODI 11g under different Domain Range?

Similar Messages

Maybe you are looking for