Is iBook G3 (Dual USB) Internal Hard Drive Replaceable?

The internal hard drive capacity on my iBook G3 700 (Dual USB) is 20 GB. Is it possible to swap that out in favor of a newer larger-capacity, internal hard drive? Or are these internal hard drives not upgradeable? Thanks in advance for your replies!
iBook G3 700 (Dual USB)   Mac OS X (10.3.9)  

Apple does not consider the hard drive to be user-upgradeable. Some people have done it themselves, but it's very complicated. You have to dismantle the iBook.
Make sure that it is a SuperSlim (or 9.5 mm high) drive, if you are going to try to do it yourself. Mention has been made of incompatibility with some Toshiba drives, so it would be wise to keep that in mind.
Online instructions (in case you want to try to do it yourself):
http://www.ifixit.com/Guide/50.12.0.html
http://www.powerbooktech.com/knowledge,name-Hard-Drive,type-6.htm
Some places that will do it for you:
MacService
DT & T Computer Services
MCE Technologies
Or maybe you'd rather put that money toward a new MacBook? Apple has made the MacBook so that the hard drive is easily upgraded by the user when that 60 GB (or bigger) hard drive starts feeling as cramped as your 20 GB one does now.
If you can afford to upgrade, it is a marvelous computer. I'm looking hard, myself.

Similar Messages

  • Dual Core internal hard drive

    Can anyone recommend an internal hard drive for G5 Dual Core?

    I will be using it for recording audio in Pro Tools, so it needs to be a 7200. I would like a 250gb or larger. My only concern is that it will work in the new Dual-core G5 that I have. Also, other than formatting the drive, is there anything else I need to do to get it working?

  • I am running 10.5.2 from a USB, I need to mount my internal hard drive, can anyone help me?

    Hi everybody. My imac suddenly died on me. It couldn't start, right after the apple sign appeared, an interrogation sign showed. I ran the disk utility, and the problem was that  the internal hard drive was not mounted. I installed the 10.5.2 (the one it came with the imac) in a USB flash drive, which I am running now. Is it possible to mount my internal drive so I can back up my data? (I know  should back my data up regularly, but I didn't). Any help would be greatly appreciated.
    Best regards,
    Alvaro.

    I suspect a failed HD, in that case I'd recommend Apple Hardware Test in Extended Mode at least 3x. You will need the original install discs that shipped with the computer, if you do not have them any longer you will need to order a replacement set from Apple by calling AppleCare. You will need a credit card and the serial number of the machine. The cost should be nominal.

  • My internal hard drive no longer boots.  Boots just fine in external usb enclosure.

    My internal hard drive no longer boots when inside my laptop.  The drive boots just fine in external usb enclosure.  It is also fully recognized when internal (as seen in single user mode, recovery mode or while booting from another drive).
    I have tried:
    with disk utilities
    •fixing permissions
    •repairing disk
    in single user mode
    •fsck -fy
    zapping the pram
    removing ram and zapping the pram
    Any suggestions or diagnostics would be appreciated.

    Can't believe I spent days reformating my hard drive, restoring it, getting another hard drive... and it was all a cable that failed.  I wonder what can make an internal cable like that fail (seems like the least likely part of all to fail).
    Thanks PlotinusVeritas
    Thanks to ifixit:
    bit.ly/1q0EnOx
    If you can't fix it, you don't own it!

  • New IMac 27"with dual internal hard drives

    How do I manage Data on my new IMac 27"with dual internal hard drives?  I have just migrated my data to my new computer.  Since I've done it from a TM backup, it all went to the Analog HD. Ressearching online I've figured I could re-run Migrating assistant and replace different data between the SSD and the Analog.  My problem now is: I want to keep my Music Library (iTunes), my Aperture Library and my documents on the analog, and use the SSD for System, Users and Apps.  Aperture, is easy, because both Aperture and iPhoto can find their way, bt iTunes and My documents are a issue.  Can Anyone help me?

    Install OS X on the SSD:
    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your SSD volume (usually Macintosh HD) from the left side list. Click on
          the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button and set the Zero
            Data option to one-pass. Click on the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to change the target disk to your SSD.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    After you boot from the SSD open Users & Groups preferences. Click on the lock and authenticate. CTRL- or RIGHT-click on the user account and select Advanced Options. You will see a Home Dir: field with a Browse button on the right. Click on the button. Navigate to the HDD's Users folder. Select your account folder then click on the Open/Choose button. You must restart immediately.
    Upon the restart your SSD system will now be using your actual Home folder located on the HDD. You can then go about installing your applications or copying them from the HDD to the Applications folder on the SSD (and also from the Utilities folder on the HDD to the one on the SSD.) You will likely need to do some transfers of the Applications Support and Preferences folders found in the main Library folder.

  • IBook won't connect to USB External Hard Drives

    I'm having a very strange issue with my ibook.
    I have three external hard drives (two of the three can use usb and firewire). If I connect them with firewire they work fine. Same thing goes for usb flash drives and usb devices (mouse, keyboards, ect.), but if I connect a usb external hard drive it refuses to read it. It gets power but it will not appear on my mac .....
    Now, I don't know if this has anything to do with it but a few years ago I was dj'ing with one of the hard drives that uses usb and firewire (it was connect using usb at the time). Something happened and the hard drive just stopped working. I thought it crashed at first. Its a western digital and every dj I know who has had a western digital has had it crash on them. I took it home and hooked it up to my pc just to make sure it was dead and it ran fine. Matter of fact I can still use it on my mac, firewire only though. Now no matter what type of external hard drive it is, if I am using usb it refuses to load on my mac.
    Any ideas on why this would happen?
    Also, the other two hard drives are both verbatim

    The best idea I have is that the USB bus in your computer isn't supplying enough power to your devices. You could try picking up a powered USB hub and using that to see if that helps.
    Alternatively, reset the PRAM, as outlined here:
    http://support.apple.com/kb/ht1379
    and the PMU as outlined here:
    http://support.apple.com/kb/HT1431
    ~Lyssa

  • New internal Hard Drive for my Ibook G4 (March 2005); Panther 10.3.9

    Hi there,
    hope I'm not posting a post which is already answered, but couldn't find any appriopriate one.
    The thing is I want to buy a bigger HDD for my lovely Ibook. Questions:
    1) I looked in "about this MAC" and found out, that it should be an ATA drive. Is that correct? Or can I use some other drives types as well? Can I use Ultra ATA to speed up the whole ship?
    2) At what else, when buying, should I pay attention?
    3) Is it advisable to buy a used hard drive, or would you strongly disadvise?
    4) Any brands, types you would suggest (I'm thinking about some nice 60-80gbs)?
    5) After buying, is it possible to make a 1:1 copy from the old one to the new one, so that I don't have to install everything again from the beginning?
    6) New ibooks are shipped with this Sudden Motion Sensor, which helps protecting the HDD. Is it possible, to have this one too?
    Thanks for all the help and response,
    and sorry if there is a post with the same matter already
    Peter (Piotr)
    iBook G4 12"   Mac OS X (10.3.9)   768 RAM, 30GB

    Hi iMaster,
    1 - Apple uses Ultra ATA hard drives.
    2 - RPM (Revolution Per Minute) I use a 5400RPM in my internal and a 7200RPM for my external. The 7200RPM hard drive I believe run hotter then the 5400RPM. You will need a hard drive that is 2.5" wide X 9.5mm tall. I believe IDE and ATA interfaces are the same.
    3 - I wouldn't buy a used hard drive because it may not last as long as a new one. Using a hard drive usually eats away at the life span.
    4 - Toshiba, Hitachi, Seagate, or IBM. You may want to look at iFixit.com for iBook compatible hard drives.
    5 - Yes, you will need to backup your iBook (on to an external drive, whether a external hard drive, iPod, computer, etc. I suggest using Carbon Copy Cloner. You may want to look at Macworld: Take Control of Mac OS X Backups and Knowledge Base Document #106941 which has examples on How to back up and restore your files.
    6 - AMS (Apple Motion Sensor, Mobile Motion Module, or Sudden Motion Sensor) is an sensor that is integrated into the logic board. It is not a hard drive feature.
    To be honest with you, I don't really recommend upgrading your internal hard drive. Do you still have an outstanding warranty on your iBook? You do realize that replacing the hard drive will void Apple's One (1) Year Limited Warranty, unless they are an AASP. If you would like hear more, let us know.
    Jon
    Macbook 2.0 White (100Gb HD 2Gb RAM) Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

  • HT1948 Can I install OS X on a usb drive connected to an imac with a dead internal hard drive?

    Can I install OS X on a usb drive connected to an imac with a dead internal hard drive?

    Yes.
    (72108)

  • After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB

    After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB
    How can i do that?

    What did you "put as slave?" What Mac model do you have, exactly?

  • I'm trying to clone a internal hard drive from another mac using a usb connection.

    I'm trying to clone a internal hard drive from another mac using a usb connection to an external drive so that I don't lose the file before reinstalling the software but I keep on getting a message:
    "Restore Failure
    Source volume is read-write and cannot be unmounted, so it can't be block copied."
    Any advice on how to make a copy of this internal drive?
    Thanks!
    ....also the internal hard drive i am trying to copying run on a mac os x 10.5 and i'm reinstalling the software because the computer is not starting and only shows a grey folder with a question marks inside.

    I've had my Maxtor external OneTouch 250GB for about 18 months now and it hasn't skipped a beat. I have hear of people having their Maxtor drive just up and die but you will probably find that goes for all manufacturers.
    By the way, Maxtor is, amongst others, an OEM supplier to Apple.

  • Can Tiger run a dual boot system with the two internal hard drives

    Can Mac run a dual boot system with the two internal hard drives both running Tiger?
    Dual 2.5GHz G5
    I am wanting to use one hard drive with Tiger to run my graphics stuff and then reboot and use the other hard drive for video.

    Yes, you can set that configuration up.
    (26293)

  • Powermac Dual 867 MHz Power PC and internal hard drive

    I was just sold a Samsung sp2514n internal hard drive- 250GB 7200RPM 8MB Cache.
    The problem is that after I installed it- my computer would not boot up. All I got is a folder with a question mark.
    When I took it out- it booted up normally.
    Before I upgraded, I was told that it would work in my computer?
    Is there something I'm not doing- that needs to be done- or is it incompatible with my computer?
    Thanks,
    Mike DiGiorgio
    Dual 867 mhz power PC G4   Mac OS X (10.3.9)  

    See the drive jumper settings here:
    click here
    You do not want CD. That's limiting the capacity to less than 32GB.
    Message was edited by: Host

  • Can I boot an internal hard drive through USB?

    I have an old 2008 Mac Pro running Snow Leopard 10.6.8 that just quit on me. When I boot up, I get to the apple logo and then the screen turns white and stays that way until I power off my machine. I have a few hard drives with operating systems installed and a boot partition. When I hold option on start up, I'm able to pick a hard drive to boot from, but I get the same problem. This leads me to believe that the issue lies with my computer, not the disks.
    I've also tried booting in safe mode and get the same problem.
    So I'm looking at purchasing one of these bad boys:
    http://www.amazon.com/dp/B0099TX7O4/ref=wl_it_dp_o_pd_nS_ttl?_encoding=UTF8&coli d=169XE2BWHBJ2P&coliid=I1JKOUV0BWEUFR
    So here's my question:
    I have an early 2013 Macbook Pro running Yosemite 10.10 that I want to use to boot my Mac Pro internal hard drives from. Is it possible to do so? I figure I can access it through pressing the option key during start up.
    Thanks!
    Jon

    I'm sorry, but that won't work because your MP only has Firewire ports and no Thunderbolt ports while your new MBP has Thunderbolt ports but no Firewire ports. Therefore, you cannot connect the two together except using Ethernet or Wi-Fi from which neither can be booted. If you use the device from Amazon, then you need to remove one of the drives to insert in it. Then you could boot from it provided the drive is actually bootable in the other machine. Snow Leopard is not capable of booting a 2013 MBP.

  • IBook G3 Dual USB  Line In Screen

    Hello,
    I have a white iBook G3 Dual USB, OS 10.3.9, 320 Megs of Ram. Recently a vertical line showed up in the middle of the screen and it won't go away. It has been running fine. Anyone have any ideas or suggestion as to what may be causing this, do I need to worry? The only thing I have added is an internal CD burner/DVD player, which has been working ok. This is a used machine.
    fancz81

    fancz81,
    Recently a vertical line showed up in the middle of the screen and it won't go away.> Anyone have any ideas or suggestion as to what may be causing this, do I need to worry?
    Is it a hard line, running vertically? like one pixel wide?
    What does it mean that the line is there?
    The display array driver on the iBook LCD is attached at the top. Sometimes it will detach from impact, heat or age. This will cause one or more line(s) to go bad. Sometimes you can make it go away by flexing the display but I have never been able to fix this problem (I have made it worse). Only changing the display.
    Richard
    Message was edited by: spudnuty

  • Incredibly slow MacBook, Internal Hard Drive issues...

    Good morning everybody! I'm apologize if this post is extremely wordy...
    I am extremely baffled by a particular issue with a MacBook 2.0GHz C2D which belongs to a friend of mine. The warranty is expired.
    _Brief history:_
    Several months ago, this MacBook could not find a bootable volume. The drive would not mount when booting from an external FireWire hard drive. It would not mount when the MacBook was put in Target Disk Mode and connected to another Mac. When booting from an external USB hard drive or with my MacBook Pro connected to the MacBook via Target Disk Mode, the MacBook booted up quickly. I came to the conclusion that the internal hard drive must have failed and needed to be replaced. Ultimately, the data was not recoverable from this drive.
    I then proceeded to swap out the defective Apple OEM Seagate hard drive with a known working Apple OEM Fujitsu hard drive. When booting from the Leopard Install DVD, the MacBook would boot incredibly slow, but would finally reach the Installer Language screen. When proceeding to install Leopard, the drive would take a very long time to have data written to it, and ultimately the install failed. I removed the new hard drive from the MacBook and placed it in an external USB enclosure, attached it to the MacBook and booted from the Leopard Install DVD. Leopard would install successfully. I removed the hard drive from the enclosure and reinstalled it the MacBook. When booting from the freshly installed OS, the MacBook would take a very long time to boot. The MacBook is extremely slow!!!
    I checked the Activity Monitor to ensure CPU & System Memory Usage was not going crazy. All Processes where normal with adequate CPU & Memory headroom.
    I took the MacBook apart thinking that the SATA Controller Cable might be loose. No, it was firmly in place. I reassembled the MacBook and booted it up again. Still incredibly slow!
    Finally, after several reboot attempts, the MacBook would book up quickly and operation was perfect. I applied all updates and continued testing the MacBook with great success. Gave my friend his MacBook back and he was grateful.
    _Now for the kicker..._
    My friend brought me his MacBook a week ago complaining that the MacBook was operating extremely slow (much like when I was initially testing it before). I verified the MacBook was slow when I tried using it. I tried several reboots and then it would get stuck on the gray Apple with spinning gear.
    I tried booting into Single User Mode, but it gets stuck on "Waiting for root device"
    I put the MacBook in Target Disk Mode and connected it to my G5 2.0GHz Dual Core. The hard drive would mount quickly on the G5 and I used Disk Utility to create a Restore Image. The disk operation would perform normally and the image would be created successfully.
    I then partitioned the MacBook's hard drive when connected to the G5, ejected and proceeded to attempt OS reinstall. No dice! The hard drive is not even detected by the Disk Utility on the Leopard Install DVD.
    Finally after several reattempts, the hard drive is recognized, but is extremely slow when trying to reinstall...and again, ultimately install fails. Using Disk Utility from Leopard Install DVD, the hard drive fails to unmount when I try formatting.
    I don't have Apple Hardware Test disc for the MacBook or Apple Service Diagnostics disc for this model. Running TechTool Pro shows hardware to be okay, disk controller onboard the Fujitsu drive is okay, but running SMART & Surface Scan takes a long, long time (which I'm certain will ultimately error out). Running Drive Genius takes a long, long time as well.
    Conclusion:
    I think the SATA Controller Cable is defective. I can't think of anything else that would cause disk errors or performance issues like this. Your input is truly appreciated!

    Even though no one responded to my post, I thought I'd share the resolution with the entire Apple community. I hope this information will be helpful to some of you with MacBooks or MacBook Pros that may be running painfully slow or may be exhibiting hard drive issues because your machine won't recognize the boot drive or fails to properly boot on a perfectly healthy S.M.A.R.T. verified hard drive. It just might be the hard drive connector/cable. Here it goes...
    I visited my local Apple Retail Store and asked a "Genius" at the Genius Bar about this issue and told him my thoughts about a possible failed hard drive connector/cable. First, he didn't even know what a hard drive connector was! Then, he arrogantly stated that he never heard of such a thing and that these cables never fail. Finally, he blatantly dispelled this as a possibility.
    On the contrary with my experience, I have had many failed PATA controller cables that required replacement when supporting the desktop PC's at work. I have personally owned and supported many Apple manufactured laptops and desktops and have never encountered this issue on a Mac...until this MacBook!
    So, after looking at the Service Manual for the MacBook, I went over to my local Apple Authorized Service Provider and purchased the Hard Drive Connector Apple Part #922-7579. I replaced the original cable, reassembled and proceeded to boot the MacBook with the Leopard DVD installer. The Fujitsu drive was immediately recognized and was able to be formatted and Leopard installed without incident. The MacBook boots off the internal hard drive as normal again and works nice and fast again.
    Thank you all for your time!
    :D

Maybe you are looking for