Is iMessage down in Canada? My messages are not delivering

Someone help

Yeah just yesterday out of no where it isnt sending for me either! I live in germany here

Similar Messages

  • All of my messages are not delivered inspite of good wifi connection, why?

    why are my messages not delivered inspite of good wifi connection?

    maybe u arent sending it to a valid imessage account

  • Exchange Server 2013: incoming messages are not delivered into user mailboxes occasionally

    Exchange Server 2013 CU1, two mailbox servers (DAG, only one mail database), two CAS servers (NLB cluster). Two Sendmail/CentOS-based SMTP relays route mail between Exchange servers and Internet (incoming mail is routed to NLB cluster name).
    Usually mail flow is OK: messages are sent and received normally. However, I've got several complains from different users. They state that occasionally they don't receive messages that were sent to them from outside. Tomorrow morning I've decided to
    investigate the issue.
    So, we have a message sent from Gmail account that was not delivered in user mailbox. It was received and routed to Exchange by Sendmail host:
    Jun 27 22:06:37 MX01 sendmail[12169]: r5RG6HC8012166: to=<USER_ADDRESS>, delay=00:00:19, xdelay=00:00:19, mailer=smtp, pri=124702, relay=NLB-FQDN [NLB-IP], dsn=2.0.0, stat=Sent (<CAHgK_sjEkj41htuVsutMP3XhgR5RRDs8-EgSC-UfHoaiHWFj=A@mail.gmail.com>
    [InternalId=13069585481819] Queued mail for delivery) 
    Running Get-MessageTrackingLog applet on the mailbox servers displayed the followed log entries for the message:
    DB Server #1:
        22:11:18 HAREDIRECT
        22:11:18 RECEIVE
        22:11:18 AGENTINFO
    DB Server #2:
        22:11:18 HARECEIVE
        22:12:44 HADISCARD
    So, we can see that the message was placed into shadow queues, but was NOT delivered into mailbox (no DELIVER status entries). Also pay attention to the timing. Time on all the servers is in sync, but Sendmail timestamp is 22:06, and Exchange timestamps
    are 5 minutes behind it.
    Today a message sent to the same address from the same Google mailbox was received by Exchange and placed into user mailbox with no glitches.
    We use Exchange antispam system activated on Exchange mailbox servers. Spam is never dropped silently. It is either returned to sender (SCL 9) or placed into quarantine mailbox (SCL 6 and above). I'm pretty sure that the lost message was not in the quarantine
    mailbox this morning, and the sender didn't receive any NDRs.
    Any ideas what to investigate next?

    Hi,
    Do you mean the emails are placed in the Shadow Redundancy queue?
    Shadow Redundancy
    http://technet.microsoft.com/en-us/library/dd351027(v=exchg.150).aspx
    Thanks,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • IOS 5: regular messages are not sent if one recepient is registered with iMessage

    There is a bug in iOS 5: SMS messages are not sent if one receipients mobile number is registered with iMessages.
    This is confirmed by the developer of the team sms app:  if you send a message to a number of receipients and one of the recepients mobile numbers, the message is sent do, is registered with iMessage, then none of the recipients will receive the message.
    Does anyone know a work around until Apple comes up with a bugfix?
    Regards, Til

    I am not sure about the details of your case, but I can confirm that a message does send to multiple recipients even if one of this has iMessage.  I recently sent a message to two people, one with a BB and one with an iPhone 4 (iOS 5 and iMessage working).  Because of the difference, it resorted to the least common denominator and sent the message as a standard text to both people.  I was replied to by both parties.  Based on your description I can confirm that your detail is not the case.
    Have you checked through the settings in Messages?  Do you have a texting plan associated with your account?  I am sorry if these questions seem stupid, but they are worth asking to verify.
    I hope this helps!

  • Since upgrading to iOS7 some text messages are not being sent, iMessage on my Ipad and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things

    Since upgrading to iOS7 some text messages are not being sent on my iPhone 5, iMessage on my Ipads and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things. Any suggestions to fix these faults?

    Make sure People Sending you via iMessage are sending their messages on your PHONE number not on your EMAIL addresses . My sister had the same problem, thats how i managed to solve it!

  • Sent Messages are not saved in Sent Mailbox

    It was working correctly but suddenly all my sent messages are not saved in the Sent Mailbox. I follow all the Mail Help instructions but nothing seems to work. Hope that someone can help me. I asked for help on december 14 but it was not helpful

    The mailboxes drawer contains all mailboxes under In, Drafts, Sent, Trash and Junk (if you have Junk Mail set to automatic).
    If you have a .Mac or IMAP type account, you also have an account named icon for the .Mac or IMAP type account at the bottom of the mailboxes drawer. It is named by the Account Description you provided/entered for the account under the Account Information tab for the account preferences.
    If you select save Sent messages on the server for a .Mac or IMAP type account, the account's Sent mailbox will be available under the account named icon in the mailboxes drawer along with all other server stored mailboxes.
    To open the account named icon for your .Mac account to reveal the server stored mailboxes including the account's Sent mailbox, select the black triangle beside your .Mac account icon in the mailboxes drawer pointing it down.
    Select the account's Sent mailbox and at the menu bar, go to Mailbox > Use This Mailbox For and select Sent.
    If you deselect store Sent messages on the server for the account preferences, the account's Sent mailbox will be available under Sent in the mailboxes drawer and you can't use "Use This Mailbox For" for mailboxes stored locally on the hard drive. It can only be used for .Mac or IMAP type account mailboxes that are stored on the server.

  • Text messages are not coming in

    apple changed updated my new eamil address in itunes and now my messages are not coming in.help

    Hi nancy183,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Ensure that iMessage is turned on in Settings > Messages.
    To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
    iPhone: Troubleshooting Cellular data
    iOS: Troubleshooting Wi-Fi networks and connections
    iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
    If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
    Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Cheers,
    - Judy

  • HT4623 My messages are not being sent. Can someone help?

    My messages are not being sent. Can someone help?

    Alan, how you're doing?
    You already know issue is not with the email account, since it's working on another devices.
    Now you have to define whether it is a user specific or system wide issue.
    Create another user account through system prefereces > users and groups. Try to set up account on the new test user.
    If it works, get back to your main account, open mail application, go to menu > Window > open activity and connection doctor (Make sure you organize these tools in a way that allows you to see both mail windows and activity/ connection doctor... Now, try to send a test email and you will see where the issue is.
    Then...
    Go to mail preferences > select your email account > click the - button to remove it and + to readd account.
    Fill your full name, email address and password. Now, hold down option key and press continue... Insert incoming and outgoing information.
    Any doubts, feel free to ask.

  • My messages are not going through or coming in from other iOS devices.  Having to send and receive in SMS.  What is up?

    My messages are not going through or coming in from other iOS devices.  Having to send and receive in SMS.  What is up?  Anyone else having these issues?

    There's an article that Apple has acknowledged this issue. They recommend turning off imessages, reset all settings and then reactivate imessages.
    If that doesn't work, you may just have to wait until they release an update, which should be pretty soon.

  • My instant messages are not being recognized after update

    After I did the latest update, some of my instant message are not coming up with the person's name from my contacts, rather, just the phone number is showing up.

    Try resetting the SMC and pram
    To reset the SMC
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    To reset PRAM/NVRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • My messages are not showing

    My messages are not showing

    JBH, when Apple reeased the new OS (Operating System) for their mac computers, they included many more iOS-like features. Some of these features included Reminders, nots, calendars, and iMessage. As of the newest release, you can now send iMessages from your mac to other macs or iOS devices. (iPod Touch, iPhone, and iPad.) If you set up your account in "messages" on your iMac by going to preferences (CMD+,) andadding your iMessage account, you can send and receive messags on your iMac.

  • Help! The network@et​p messages are not automatica​lly deleting in outlook

    My redirector was working fine and all of a sudden the network@etp messages are not automatically deleting from my inbox.  I am still receiving my emails on my blackberry but these network messages are cluttering my inbox in outlook.  When I shut down the redirector and restart it the network messages that were in my inbox are deleted but then when a new message comes in the new network message for that emails remains in outlook.  Does anyone know how to fix this?

    Hi Vinod,
    You issue might be related to this:
    "By default, the out-of-office reply to Internet recipients (external senders) is turned off. Many administrators do not allow out-of-office replies to be sent outside the Exchange Server organization, so that unauthorized people do not
    know when users are out of the office. "
    You might want to follow the steps in below KB article to turn on out-of-office replies to the Internet or contact your administrator to check so:
    http://support.microsoft.com/kb/323665/en-us
    Hope it helps and feel free to post back.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • I iphone 4 is not sending texts to my friends and family with iphones.  The blue messages are not going through.  My green messages are going through. Help!

    My Ipone is not sending text messages. i can recieve the messages, but my replies are not being sent.. this seems to only be an issue to sendin to other iphones.  The blue messages are not being sent.  if the box is green, the meessage is sent.this seems to ahve started after i down;oaded the latest operating system.  HELP!!

        Welcome to the Verizon family, ivpacks! I regret to learn that your alarms didn't work. I also regret that there is a problem with the messages. Have you tried the alarm again? Does it still not work? For instance, just set the alarm for a couple of minutes away to ensure that the alarm goes off.
    When you send a text, do you get an error? If you power the phone off/on, do the messages send? This particular issue is expecting a software update to resolve the issue with texts and picture messages.
    I believe that you have chosen a great device, but keep in mind that there is a 14 day exchange period. If you exchange for the same make/model, you will not pay the restocking fee.
    If you do exchange for a different make/model, there is a $35.00 restocking fee.
    TamaraH_VZW
    Follow us on Twitter @VZWSupport

  • Cisco 5.0 "Your messages are not available now" after exchange 2010 and DC migration to a new host

    Guys,
    First of all, thanks for looking at this post. Hopefully you guys can help me out. My unity users, when dialing into voicemail are getting the message "Your messages are not available now".
    Services in error state under the event viewer:
    Event Type:    Error
    Event Source:    CSAgent
    Event Category:    Kernel Rule 
    Event ID:    256
    Date:        7/29/2014
    Time:        11:42:41 AM
    User:        N/A
    Computer:    UNITY
    Description:
    A packet with a bad transport layer header was detected. Reason: Illegal TCP reserved flags set using interface Wired\HP NC324i PCIe Dual Port Gigabit Server Adapter. TCP: 00.000.00.000/443->00.00.0.00/1241, flags 0x10. The operation was denied.
    Event Type:    Error
    Event Source:    CiscoUnity_MALEx
    Event Category:    Error 
    Event ID:    30012
    Date:        7/29/2014
    Time:        11:44:27 AM
    User:        N/A
    Computer:    UNITY
    Description:
    An occurred which prevents successful Exchange access by CsBMsgConnector via MAPI.
    This is typically an indication of configuration issues with Unity, Exchange, or the MAPI subsystem.
    Verify that the Unity services accounts are granted the correct permissions and that there are no issues with installation.  The SysCheck utility may assist in diagnosing the problem.
    Event Type:    Error
    Event Source:    CiscoUnity_Doh
    Event Category:    Error 
    Event ID:    32013
    Date:        7/29/2014
    Time:        11:44:27 AM
    User:        N/A
    Computer:    UNITY
    Description:
    Doh logon failed due to messaging component logon error: 8004052eH
    I found and followed to the letter:
    http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unity/107323-unity-error.html
    I also went ahead and ran GUSI with some mixed results under environment information:
    SQL Version = Microsoft SQL Server  2000 - 8.00.2282: unknown SP
         SQL Edition = Desktop Engine
         Windows version =  5.2 Build 3790: Service Pack 2
         Outlook is not installed on the local server
         MAPI Provider : CDO Version - 6.5.8211.0
         MAPI Shared Memory: (HKLM:SOFTWARE\Microsoft\Windows Messaging Subsystem\Applications\<process>\SharedMemMaxSize)
                AvCsMgr : is set to recommended value
                AvMsgStoreMonitorSvr : RegKey not found.  Recommend add the key AvMsgStoreMonitorSvr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                AvNotifierMgr : RegKey not found.  Recommend add the key AvNotifierMgr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                AvUMRSyncSvr : is set to recommended value
                CsBMsgConnector : RegKey not found.  Recommend add the key CsBMsgConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                CsBridgeConnector : RegKey not found.  Recommend add the key CsBridgeConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                CsVpimConnector : RegKey not found.  Recommend add the key CsVpimConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
             TCPChimney : Disabled
             RSS : Disabled
             *Pulled from UnityDB Configuration Table*
             ExcludeAllReceipts : 0
             ExcludeReturnReceipts : 0
             DisableSearchFolderUse : 0
             MinSearchFolderLifeHours : 1
             OptimizeSearchFolderUse : 0
    I tried following and deleting the Unity System Profile:
    https://supportforums.cisco.com/discussion/11249996/unity-501-exchange-2010-unable-logon-mapi-mailbox
    But I am still scratching my head. Any direction will be appreciated.

    Turns out that unity came back after all this. Maybe it just needed time. I think I answered my own question.  Anyways, this post could serve for future reference. 

  • PL/SQL log messages are not printing from Java concurrent program

    Hi,
    I have a strange issue while submitting the Java concurrent program through PL/SQL.
    I have a PL/SQL concurrent program which will invoke the Java concurrent program inside the package by use of "FND_GLOBAL.SUBMIT_REQUEST". It worked and submitted successfully. From that Java concurrent program we are calling some other PL/SQL packages and printing some log messages over there. But problem here is the request is only printing the Java log messages in view log but not the PL/SQL log messages.  But if I submit the Java concurrent program directly from SRS form at that it is printing both Java and PL/SQL log messages.
    I am just wondering how the log messages has not printed. Please provide your inputs to solve this problem.
    Thanks
    Suriya

    I'm adding log messages in the package body , but these messages are not printing after completion of concurrent prog.
    Any suggestions.
    FND_FILE.PUT_LINE(FND_FILE.LOG,'Data Test :');Do you have COMMIT in your code?
    https://forums.oracle.com/forums/search.jspa?threadID=&q=%27FND_FILE.PUT_LINE%27+AND+commit&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

Maybe you are looking for