Is in dv6 6155tx Screen backside HP LOGO blinks or light up or not.please reply

please reply me that hpdv6-6155tx model's back screen HP LOGO blinksor not.in mine it is not blinking s i m worried please reply

Hi Jaco, 
Ive downloaded Nvidia 32 bit version and as soon as my comp came back on i could see the changes straight away
Getting the wide screen look off my comp was my main issue and that you have done  
Thank you so much for taking the time to help me. Your a star!  
Really appericate it  
Eric and Caz

Similar Messages

  • HT4623 help! I didn't use my ipad for about a month then now it would not turn on, just a balck screen with apple logo blinking in the middle, please help

    Help me. I did not use my ipad for about a month.Now that I turned it on after trying to charge it for many hours, it just would not turn on, just a black screen with sometimes an apple logo blinking, brought it to repair shops, said they could not fix it, please help

    The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
    You're on your own.  Good luck.

  • My MacBook is having issues.  When boot the computer it loads with the normal white screen and apple logo then changes to the "do not" sign

    The computer is stuck on a white screen with the "do not" sign.

    I'm having the same issue, except my touchpad and computer keyboard are not responding.  Is it a similar situation with you?

  • 8330 screen is dark & get blinking red light (4blinks)

    My 8330 screen is dark and I get flashing or blinking red signal.  I have tried pulling the battery to reset and does not help.  Can anyone offer any suggestions?
    Thanks,
    JRW8
    Solved!
    Go to Solution.

    You need to load the operating system software to your PC, first... before you can install it to your device.
    Good luck, post back here if needed. Those instructions will work. Follow them exactly as written.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • TS4006 my daughter has dropped her 2 week old ipad 2 whilst talking to a friend  on skype, now the ipad has a black screen but has some back ground light , i have tried resetting but nothing happens , can any one suggest other options

    My daughter has dropped her 2 week old ipad 2,  it has a black screen with a little back ground light, but will not turn on . i have tried resetting and holding both the reset and sleep buttons down with no responce , can anyone suggest something else i can try please

    Take it to an Apple Store.

  • I am unable to find the usb 3.0 ports on my pavillion dv6-6155tx

    i bought a nev hp pavillion dv6-6155tx laptop with windows 7 64bit home basic i tried to connect my Western Digital Harddisk to all the 4 available ports and still managed to get only the same rate of data copy. is there any problem with my usb 3.0 and how do i confirm that i actually have usb 3.0.

    Hi,
    Left hand side, but ONLY for selected models:
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • ITunes Store wont open. Only thing appears is the white screen with Apple Logo

    iTunes Store won't opeen. Only thing appears is white screen with Apple Logo and takes really, really long to load.

    Hi Davin12,
    I'm sorry to hear you are having issues acessing the iTunes Store from your Windows computer.
    The article below may be able to help you with this issue.
    Click on the link below to see more details and screenshots. 
    I've quoted some helpful highlights for you:
    iTunes for Windows: iTunes Store connection troubleshooting
    Remove pop-up blockers
    Some pop-up or ad-blocking programs may interfere with the ability of iTunes to connect to the iTunes Store. Removing them in many cases will resolve the issue.
    Flush DNS Setting in Windows
    In some cases, the DNS information you computer uses to connect to the Internet needs to be reset. Follow these instructions to flush your Windows DNS information:
    Windows XP
    On the Start menu, click Run.
    In the Open field type cmd and click OK.
    In the resulting window, type ipconfig /flushdns and press Return on the keyboard.
    You should see a message that the DNS Resolver Cache has been successfully flushed.
    Windows Vista and Windows 7
    On the Start menu, point to All Programs > Accessories and then right-click Command Prompt and chooseRun as Administrator from the shortcut menu. If Windows needs your permission to continue, click Continue.
    In the resulting window, type ipconfig /flushdns and press Return on the keyboard.
    You should see a message that the DNS Resolver Cache has been successfully flushed.
    Note: If, in the command prompt, you see this message: "The requested operation requires elevation", close the command prompt and repeat steps 1 and 2 above to be sure that Administrator privileges are used to access to Command Prompt.
    The article below will help you troubleshoot the issue from your computer or your iPod Touch:
    iTunes: Advanced iTunes Store troubleshooting
    I hope this information helps ....
    Have a great day!
    - Judy

  • My MacBook Pro is stuck on grey loading screen with apple logo and spinning wheel.

    PLEASE HELP - Tried to start up my MacBook Pro and I get grey screen w/ apple logo & spinning wheel. It's stuck on this screen. Safe mode didn't help but reveled this: smc read key action error, BOOS key failed, BOPS key failed. Consider rebuild of prelinked kernal com.apple.kext triggers triggered rebuild. IOBluetooth host controller USB transport Suspend Device. I ran verifications/repairs in Disk Utilities, but nothing came back wrong on the reports. I'm a bit panicked, as I use this computer for work and have no other computer to use in the meantime. I should also note that I have very little technical knowledge, so if you can lend your help please keep that in mind when responding. I'd be over the moon if anyone can help.

    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup - Gray Screen
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • Need Help For iMac G5 Stuck On Grey Screen Or Apple Logo No Spinning Gear!

    Hello everyone i'm new here and i'm new for using iMac for some reason i was trying to clean or to fresh installation the iMac that my brother gave it to me that he bought it into the flea market without the original disk on it! when i erase the Macintosh  HD and some of the partition o iMac then reboot it now the iMac stuck on grey screen or apple logo no spinning wheel shown. and i also try to search and try all the tips of all mac user's like all the command key's and follow the instruction of them but still nothing happen..
    Holding CMD & R just to go disk utilities nothing shown up only apple logo and the noisy fan.
    Holding alt and it go to blue screen and show my mouse Pointer Refresh Logo, Hard drive Icon, Arrow Sign.
    i can click Arrow Sign and it go Apple Logo and within 2-3 seconds and it change to Power Sign Logo,
    i can click Refresh Logo but nothing happen .
    i can't click the Hard Drive icon.
    CMD, Option, P & R to Reset i also try and it's the same nothing change.
    CMD, Option, ESC no action shown.
    Is there anyway to fix this issue or problem please and thank you for help.
    Hoping to get result for all of you guys P.S
    iMac G5
    v10.5.8
    Leopard

    You need to have the install DVD that was issued with the iMac
    You can call Apple at 1-800-275-2273

  • There's a logo that pops up on my ipod touch screen with the logo Itunes and the USB cord but is unable to connecct with iTunes...what should i do?

    There's a logo that pops up on my ipod touch screen with the logo Itunes and the USB cord but is unable to connecct with iTunes...what should i do?

    Resolve communication issues
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    Common errors: 1004, 1013, 1638, 3014, 3194, or 3000-3999. These alerts refer to gs.apple.com, say "There was a problem downloading the software", or say the "device isn't eligible for the requested build".

  • Ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

    ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

    Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
    If not successful, then time for an appointment at the Genius Bar of an Apple store.

  • I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

    I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • I disconnected my iPad unconsciously while it was updating ios 7.0.4 and it just stuck on that screen showing apple logo and a loading bar that just won't move on what to do now ????

    I disconnected my iPad unconsciously while it was updating ios 7.0.4 and it just stuck on that screen showing apple logo and a loading bar that just won't move on what to do now ????

    It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
    If that still won't work, post back with detailed information as to what exactly does happen as you go through the process.

  • When turning on my mac book pro it displays a screen with apple logo and begins loading a loading bar, after this continues to show loading circle however has been like this all day still no different. Tried turning it on and off however still same!

    When turning on my mac book pro it displays a screen with apple logo and begins loading a loading bar, after this continues to show loading circle however has been like this all day still no different. Tried turning it on and off however still same!

    ... then run Disk Utility, Repair Disk.
    Also:
    Resolve startup issues and perform disk maintenance with Disk ...
    Mac troubleshooting FAQ: start-up woes
    How To Fix Common Mac Startup Problems
    Mac Stalls on Gray Screen at Startup - Troubleshooting Mac Startup ...

  • MacBook Pro White screen, No apple logo, No question mark

    Hi guys
    I've MacBook pro 13 2010 model
    The Laptop turn on all the time when i press power button
    but  It's stuck in white screen ( without apple logo ) .  With hard drive connected or no hard drive i still can't see the question mark folder
    What i've done
    - Reset NVRM  ( shift + Command+ option + power )   and it worked as i can see light changed in the charger
    - I removed the hard drive put new one, then again removed hard from the board but no luck
    - connected the Laptop to a monitor but not even showing video in the external monitor
    Why can't i press PRAM button.   NVRM work OK but not PRAM  ( Option + Apple logo + P + R )
    so keyboard is fine

    askmeplz82,
    if you’re unable to boot into Mountain Lion’s Recovery mode, then that limits your self-help options. These options still remain:
    Do you still have the two grey installation DVDs which originally came in the box with your MacBook Pro?
    Do you have a bootable external disk?
    Do you have access to a FireWire cable and access to a second Mac with a FireWire port?
    Do you have a spare SATA disk which can be temporarily installed inside of your MacBook Pro?
    If the answer to all of these is no, then your only remaining option is to make an appointment at an Apple store or other qualified service facility so that they can diagnose/repair your MacBook Pro.

Maybe you are looking for

  • How to import into lightroom 3.6 from my pictures windows xp

    also, after editing in Develop the photo goes darker in Print and also darker back to Develop and Library

  • Connecting my western digital drive with airport to use with my idevices

    I purchased "my book essiential" i had it reformatted at the apple store to be used by my apple products. Now I have it connected to my "airport extreme base" and I need to establish an access with my  book essential using my iPad and my iPhone. At t

  • Solaris 10 u5 Samba slow transfer rates?

    Hi! I've installed Solaris 10 x86 (Core2Duo - x64) server, with Samba over ZFS RAID-Z. Samba is a part of Active Directory Domain. I've managed to join it to domain, to get the users and groups from A.D. and to translate them to Unix IDs. Everything

  • Any suggestions for the ITEM NUMBER field

    We sell DVDs, Books, CDs, etc. for which we have item groups setup. We are using the ISBN based EAN barcode for the bar code field. Any best practices for coming up with the ITEM NUMBER naming convention that people have for us. Currently we use the

  • How to export ZCM inventory database?

    We're in the middle of implementing a new Service Desk Tool. I'd like - no, I need - to have workstation inventory data present in that tool. What's the best way to get to that information? How can I export data? Thanks Kind regards Roland