Is intel 4400 hd graphics enough?

Hello
I am intending to buy this laptop
Processor Name
Intel® Core™ i5-4200U Processor 1.60 GHz with Turbo Boost up to 2.60 GHz*1
Pre-installed/Max
4 GB (4 GB (PC3L-12800 SO-DIMM) x 1) DDR3L SDRAM (Max)*2
Memory Speed
1600 MT/s
Graphics Accelerator
Intel® HD Graphics 4400
am I going to get a good performance if used premiere, after effect or photoshop? And notice I said good I do not need it to be rapid fast neither extreme slow.
Also, I already have 5145 1gb ati which was released in 2010 and I am having a pleasant performance, will I get more, same or less with intel 4400 hd graphics card?
Best
Adil

Better correct that to:
If all you edit is SD (Standard Definition) you will get slow-to-medium SLOW... if you try and edit HD you will get VERY, VERY AGONIZING slow
All you need is a better CPU, more memory and better disks (plural).
See Tweakers Page - What about Laptops?

Similar Messages

  • Is Intel GMA X3100 graphics enough?

    Does anyone know if the updated MacBooks with the Intel GMA X3100 graphics processor now supports some of the build transitions that were previously unavailable (burn, flash etc...)
    Thanks

    Good question. I'll have to stop by my local Apple Store to check (I was there during the Leopard release, but didn't look specifically for that).

  • Is intel iris pro powerful enough

    Is intel iris pro powerful enough for graphic intensive programmes such as auto cad , sketch up and final cut?

    Yes

  • Refresh rate HP 850 G1 (Intel 4400)

    Hi all, I have a HP 850 G1 laptop and in general I'm very happy with it. In the past I only had a slight issue with screen flickering at lower brightness settings, but setting the refresh rate to 40p hz resolved that issue. After updating to Windows 10, however, it was no longer possible to set the refresh rate to 40p hz. Since I hoped reverting back to Windows 8 would solve it, I performed a factory reset. I am currently using Windows 8 again but it's still not possible to switch to 40p hz, not even through the Intel Custom Mode App.  The graphics report from the Intel graphics control panel confirms that the monitor supports the1920x1080x40p hz mode. Any help/suggestions to enable the 40p hz setting again is greatly appreciated!  Driver Version: 10.18.14.4251
    Operating System: Windows* 8 Pro (6.2.9200)
    Default Language: Dutch (Netherlands)
    Physical Memory: 3993 MB
    Vendor ID: 8086
    Device ID: 0A16
    Device Revision: 09
    Video BIOS: 2175.1
    Current Resolution: 1920 x 1080 
    Processor: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz
    Processor Speed: 2295 MHz
    Processor Graphics in Use: Intel(R) HD Graphics 4400
    Shader Version: 5.0
    OpenGL* Version: 4.3
    OpenCL* Version: 1.2
    * Microsoft DirectX* *
    Runtime Version: 11.1
    Hardware-Supported Version: 11.1 
    * Devices connected to the Graphics Accelerator *
    Active Displays: 1 
    * Built-in Display *
    Display Type: Digital
    DDC2 Protocol: Supported
    Gamma: 2.2
    Connector Type: Embedded DisplayPort
    Device Type: Built-in Display
    Maximum Image Size
    Horizontal Size: 13.39 inches
    Vertical Size: 7.48 inches
    Supported Modes
    1920 x 1080 (60p Hz)
    1920 x 1080 (40p Hz)  Raw EDID:
    00 FF FF FF FF FF FF 00 0D AE C2 15 00 00 00 00
    04 17 01 04 95 22 13 78 02 46 35 9E 57 57 94 27
    14 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
    01 01 01 01 01 01 B4 3B 80 4A 71 38 34 40 5A 3C
    69 00 58 C2 10 00 00 1A CD 27 80 4A 71 38 34 40
    5A 3C 69 00 58 C2 10 00 00 1A 00 00 00 00 00 00
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02
    00 0C 33 FF 0F 3C 96 21 14 33 96 00 00 00 00 70

    Hi
    I have noticed that on some Toshiba notebooks the screen refresh rate is fixed on 60 Hz. I have two of them. On Tecra M1 is fixed and on Satellite 1900 not. I have tested it and there is no difference if the refresh rate is changed.
    The TFT technology is much better than on usual monitors where the display flickering is visible on lower refresh rate. On display you will not see any flickering. In my opinion there is no reason for panic.
    Enjoy the life!!!

  • HP Envy 15 Graphics Problem with Windows 8.1 (Intel and NVidia Graphics). Help!

    I bought an HP ENVY TouchSmart 15-j013ea about 6 months ago and I have had a major problem with the graphics that I cannot seem to solve. I think it started when I updated to Windows 8.1, even though I am not 100% certain.
    I have noticed the following three problems, and I think they are related:
    Some windows (such as Chrome, Skype, or even Device Manager or other windows) are very blurry compared to others.
    The firefox menu window has some deformed black arrows instead of the normal ones.
    When playing a game (specifically, Star Wars the Force Unleashed 2), after a while I get an error that the computer has ran out of memory. However, according to task manager, only about 50% is in use, not to mention that I have 8 GB of RAM + 2 GB graphics memory. At the same time, the computer gets rather loud (like a fan working overtime) and hot.
    The laptop has both Intel and NVidia graphics, and both are enabled in Device Manager. To be honest, I have no idea which is used when, or how to check that (let me know if there is a way)
    I have tried the following without success:
    Uninstalling the Intel graphics driver from device manager and installing a version I downloaded from the HP website for my laptop and OS. After that, Windows would NOT BOOT, and I had to do a system restore.
    Uninstalling the Intel graphics from Programs and Features, and installing 2 different versions from the Intel website. Nothing changed.
    Updating Nvidia driver through GeForce Experience. Nothing changed.
    Updating Intel drivers from Windows Update. Nothing changed.
    Quite frankly I am not sure what the problem could be, since the graphics versions are supposed to be compatible with WIndows 8.1. I also don't get why some windows are blurry and others are not. I am thinking the computer uses only the Intel graphics and not the Nvidia (at least in the blurry windows), but even if that was the case (and it shouldn't be), I don't think I should be having this problem.
    At this point, I really need help. My graphics details are:
    Intel HD Graphics 4600: Driver version: 10.18.10.3412
    NVidia GeForce GT 740M: Driver version: 335.23
    NVidia GeForce Experience version: 1.8.2
    I am attaching screenshots that show driver details and the problems.
    Thank you.
    Blurry Chrome:
    Firefox menu problem:
    Device Manager and driver windows are also blurry, both graphics are shown

    I had a similar problem with a Dell laptop.  I found the problem was the laptop wanted to switch between the Intel and NYIDIA video cards.  It would switch to the Intel when high graphics was not required then to the NIVIDIA when high graphics was required.  The laptop does this to save power when high graphics is not required but it caused problems with some applications, specifically high graphics games.
    For me the solution was to disable the Intel graphics processor.  You can do this by right clicking on your Wallpaper, select the NIVIDIA Control Panel, then select Set Physx Configuration.  You will see a dropdown box labeled Select Physx Processor.  It is set to Auto by default.  This allows the switching I described. Select this dropdown box and select your NIVIDIA processor.  This will prevent the laptop from switching and force it to use your NVIDIA processor exclusively.
    Hope this helps.
    Sacto Fred
    Owner and CEO
    H&O PC Soultions

  • Ati Mobility HD 5470/Intel integrated hybrid graphics

    Hi! I have a Acer TimelineX 5820TZG laptop which has switchable graphics. I am struggling to make Arch work with my dual-graphics configuration, and I have tried a lot of things, but it doesn't work.
    Right now I am working with the Intel integrated graphics card but I am not even sure if the Ati is completely switched off (I am afraid it's not, as I read in a lot of posts about switchable graphics).
    The first thing I did is installing the open-source drivers for ati (xf86-video-ati) and intel (xf86-video-intel). First I tried to make both cards to work by using the vgaswitcheroo method, I mounted debugfs, modprobed the radeon module and using:
    cat /sys/kernel/debug/vgaswitcheroo/switch
    I checked that the currently working card is the Intel integrated. I made sure the ATI is switched off by doing
    echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
    (As explained in the wiki for hybrid graphics) and then started the X server. In this case the X server starts and sometimes even starts loading my WM (kde), but eventually the system gets frozen and all I can see is warning messages in the terminal (CPU #1 stuck for 23s!) and I am unable to use another terminal with Ctrl+Alt+Fx or soft-resetting. Some times it gets stuck on a loop, showing a lot of messages in the terminal and not allowing me to kill the process in any way.
    Then I tried modprobing 'radeon' and then using
    echo DDIC > /sys/kernel/debug/vgaswitcheroo/switch
    to enable the dedicated graphics card (Ati) and turning off the integrated one (intel) to see what happens. In this case the X server simply crashes, leaving me with the following log:
    187.209]
    X.Org X Server 1.16.3
    Release Date: 2014-12-20
    [ 187.211] X Protocol Version 11, Revision 0
    [ 187.213] Build Operating System: Linux 3.18.1-1-ARCH x86_64
    [ 187.214] Current Operating System: Linux Alejandro-ArchPC 3.18.5-1-ARCH #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015 x86_64
    [ 187.214] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d5fd73a4-f13f-d001-10bd-71a4f13fd001 rw quiet
    [ 187.218] Build Date: 29 December 2014 01:09:58PM
    [ 187.219]
    [ 187.220] Current version of pixman: 0.32.6
    [ 187.223] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 187.223] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 187.228] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 4 16:17:27 2015
    [ 187.275] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 187.276] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 187.276] (==) No Layout section. Using the first Screen section.
    [ 187.276] (==) No screen section available. Using defaults.
    [ 187.276] (**) |-->Screen "Default Screen Section" (0)
    [ 187.276] (**) | |-->Monitor "<default monitor>"
    [ 187.277] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 187.277] (==) Automatically adding devices
    [ 187.277] (==) Automatically enabling devices
    [ 187.277] (==) Automatically adding GPU devices
    [ 187.277] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
    [ 187.277] Entry deleted from font path.
    [ 187.277] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
    [ 187.277] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 187.277] Entry deleted from font path.
    [ 187.277] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 187.277] Entry deleted from font path.
    [ 187.277] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 187.277] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 187.277] Entry deleted from font path.
    [ 187.277] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 187.277] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 187.277] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 187.277] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 187.277] (II) Loader magic: 0x818d80
    [ 187.277] (II) Module ABI versions:
    [ 187.277] X.Org ANSI C Emulation: 0.4
    [ 187.277] X.Org Video Driver: 18.0
    [ 187.277] X.Org XInput driver : 21.0
    [ 187.277] X.Org Server Extension : 8.0
    [ 187.280] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
    [ 187.280] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 187.281] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 8 paused 0
    [ 187.281] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 187.282] (EE) systemd-logind: failed to take device /dev/dri/card0: Invalid argument
    [ 187.283] (--) PCI:*(0:0:2:0) 8086:0046:1025:035d rev 18, Mem @ 0xd8000000/4194304, 0xc0000000/268435456, I/O @ 0x00004050/8
    [ 187.283] (--) PCI: (0:1:0:0) 1002:68e0:1025:035d rev 0, Mem @ 0xe0000000/134217728, 0xdc400000/131072, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
    [ 187.284] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 187.284] (II) LoadModule: "glx"
    [ 187.338] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 187.504] (II) Module glx: vendor="X.Org Foundation"
    [ 187.504] compiled for 1.16.3, module version = 1.0.0
    [ 187.504] ABI class: X.Org Server Extension, version 8.0
    [ 187.504] (==) AIGLX enabled
    [ 187.504] (==) Matched ati as autoconfigured driver 0
    [ 187.504] (==) Matched intel as autoconfigured driver 1
    [ 187.504] (==) Matched modesetting as autoconfigured driver 2
    [ 187.504] (==) Matched fbdev as autoconfigured driver 3
    [ 187.504] (==) Matched vesa as autoconfigured driver 4
    [ 187.504] (==) Assigned the driver to the xf86ConfigLayout
    [ 187.504] (II) LoadModule: "ati"
    [ 187.504] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 187.504] (II) Module ati: vendor="X.Org Foundation"
    [ 187.504] compiled for 1.16.1, module version = 7.5.0
    [ 187.504] Module class: X.Org Video Driver
    [ 187.504] ABI class: X.Org Video Driver, version 18.0
    [ 187.504] (II) LoadModule: "radeon"
    [ 187.504] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 187.504] (II) Module radeon: vendor="X.Org Foundation"
    [ 187.504] compiled for 1.16.1, module version = 7.5.0
    [ 187.504] Module class: X.Org Video Driver
    [ 187.504] ABI class: X.Org Video Driver, version 18.0
    [ 187.504] (II) LoadModule: "intel"
    [ 187.504] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 187.505] (II) Module intel: vendor="X.Org Foundation"
    [ 187.505] compiled for 1.16.3, module version = 2.99.917
    [ 187.505] Module class: X.Org Video Driver
    [ 187.505] ABI class: X.Org Video Driver, version 18.0
    [ 187.505] (II) LoadModule: "modesetting"
    [ 187.600] (WW) Warning, couldn't open module modesetting
    [ 187.601] (II) UnloadModule: "modesetting"
    [ 187.601] (II) Unloading modesetting
    [ 187.601] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 187.601] (II) LoadModule: "fbdev"
    [ 187.601] (WW) Warning, couldn't open module fbdev
    [ 187.601] (II) UnloadModule: "fbdev"
    [ 187.601] (II) Unloading fbdev
    [ 187.601] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 187.601] (II) LoadModule: "vesa"
    [ 187.601] (WW) Warning, couldn't open module vesa
    [ 187.601] (II) UnloadModule: "vesa"
    [ 187.601] (II) Unloading vesa
    [ 187.601] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 187.601] (II) RADEON: Driver for ATI Radeon chipsets:
    <LIST OF CARDS>
    [ 187.606] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
    [ 187.607] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
    [ 187.607] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
    [ 187.607] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
    [ 187.607] (++) using VT number 1
    [ 187.607] (--) controlling tty is VT number 1, auto-enabling KeepTty
    [ 187.607] (II) [KMS] Kernel modesetting enabled.
    [ 187.666] (EE) No devices detected.
    [ 187.666] (EE)
    Fatal server error:
    [ 187.666] (EE) no screens found(EE)
    [ 187.666] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 187.666] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 187.666] (EE)
    As it didn't work this way, I tried using the closed-source driver for ATI, the one in the Vi0L0 repository. I created the xorg.conf file using aticonfig --initial as suggested in the wiki. the result was Xserver crashing again, leaving me with the following log (which suggests that my system is not compatible with PxP tech by AMD and that I should not use the  fglrx driver).
    [ 2455.881]
    X.Org X Server 1.16.3
    Release Date: 2014-12-20
    [ 2455.885] X Protocol Version 11, Revision 0
    [ 2455.887] Build Operating System: Linux 3.18.1-1-ARCH x86_64
    [ 2455.888] Current Operating System: Linux Alejandro-ArchPC 3.18.5-1-ARCH #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015 x86_64
    [ 2455.888] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d5fd73a4-f13f-d001-10bd-71a4f13fd001 rw quiet
    [ 2455.891] Build Date: 29 December 2014 01:09:58PM
    [ 2455.892]
    [ 2455.893] Current version of pixman: 0.32.6
    [ 2455.896] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2455.896] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2455.901] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 4 19:38:17 2015
    [ 2455.903] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2455.904] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2455.906] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2455.906] (==) ServerLayout "aticonfig Layout"
    [ 2455.906] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 2455.906] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 2455.906] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 2455.906] (==) Automatically adding devices
    [ 2455.906] (==) Automatically enabling devices
    [ 2455.906] (==) Automatically adding GPU devices
    [ 2455.906] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
    [ 2455.906] Entry deleted from font path.
    [ 2455.906] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
    [ 2455.906] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2455.906] Entry deleted from font path.
    [ 2455.906] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2455.906] Entry deleted from font path.
    [ 2455.906] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2455.906] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2455.906] Entry deleted from font path.
    [ 2455.906] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2455.906] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 2455.906] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2455.906] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2455.906] (II) Loader magic: 0x818d80
    [ 2455.906] (II) Module ABI versions:
    [ 2455.906] X.Org ANSI C Emulation: 0.4
    [ 2455.906] X.Org Video Driver: 18.0
    [ 2455.906] X.Org XInput driver : 21.0
    [ 2455.906] X.Org Server Extension : 8.0
    [ 2455.910] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
    [ 2455.910] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 2455.911] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
    [ 2455.913] (--) PCI:*(0:0:2:0) 8086:0046:1025:035d rev 18, Mem @ 0xd8000000/4194304, 0xc0000000/268435456, I/O @ 0x00004050/8
    [ 2455.913] (--) PCI: (0:1:0:0) 1002:68e0:1025:035d rev 0, Mem @ 0xe0000000/134217728, 0xdc400000/131072, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
    [ 2455.913] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2455.913] (II) "glx" will be loaded by default.
    [ 2455.913] (II) LoadModule: "glx"
    [ 2455.913] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2455.913] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 2455.913] compiled for 6.9.0, module version = 1.0.0
    [ 2455.913] (II) LoadModule: "fglrx"
    [ 2455.913] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 2455.943] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
    [ 2455.943] compiled for 1.4.99.906, module version = 14.50.2
    [ 2455.943] Module class: X.Org Video Driver
    [ 2455.944] (II) Loading sub module "fglrxdrm"
    [ 2455.944] (II) LoadModule: "fglrxdrm"
    [ 2455.944] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 2455.944] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 2455.944] compiled for 1.4.99.906, module version = 14.50.2
    [ 2455.944] (II) AMD Proprietary Linux Driver Version Identifier:14.50.2
    [ 2455.944] (II) AMD Proprietary Linux Driver Release Identifier: 14.501.1003
    [ 2455.944] (II) AMD Proprietary Linux Driver Build Date: Nov 20 2014 21:22:54
    [ 2455.944] (++) using VT number 2
    [ 2455.944] (--) controlling tty is VT number 2, auto-enabling KeepTty
    [ 2455.944] (WW) Falling back to old probe method for fglrx
    [ 2455.959] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
    [ 2456.127] ukiDynamicMajor: found major device number 249
    [ 2456.127] ukiDynamicMajor: found major device number 249
    [ 2456.127] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 2456.127] ukiOpenDevice: node name is /dev/ati/card0
    [ 2456.127] ukiOpenDevice: open result is 11, (OK)
    [ 2461.962] ukiOpenDevice: open result is 11, (OK)
    [ 2461.963] ukiOpenByBusid: ukiOpenMinor returns 11
    [ 2461.963] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 2461.965] (--) Chipset Supported AMD Graphics Processor (0x68E0) found
    [ 2461.965] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
    [ 2461.965] (II) fglrx: intel VGA device detected, load intel driver.
    [ 2461.966] (II) LoadModule: "intel"
    [ 2461.966] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 2461.966] (II) Module intel: vendor="X.Org Foundation"
    [ 2461.966] compiled for 1.16.3, module version = 2.99.917
    [ 2461.966] Module class: X.Org Video Driver
    [ 2461.966] ABI class: X.Org Video Driver, version 18.0
    [ 2461.966] (WW) PowerXpress feature is not supported on A+I Mux platform. Please uninstall fglrx driver.
    [ 2461.966] (EE) this is a Muxless PX A+I platform, we doesn't supported it
    [ 2461.966] (EE) No devices detected.
    [ 2461.966] (EE)
    Fatal server error:
    [ 2461.966] (EE) no screens found(EE)
    [ 2461.966] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 2461.966] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 2461.966] (EE)
    So I came back to open-source drivers and right now I am working with radeon driver blacklisted and only using the intel driver, but as the radeon is blacklisted, vgaswitcheroo is not created and I don't know if mi ATI card is completely switched off.
    As you can see, I have done the stuff suggested in the Acer TimelineX wiki page and it didn't work. I have also tried some other suggested actions I found but still can't get my switchable graphics to work.
    I would really like to get both my cards to work completely, so I can switch graphics and restart the X server to get better performance or enhance my batt life depending on which GPU I am using; but at this point I am just fine with turning off the ATI card completely and just work with the intel one (though if there is a method for making both work, I prefer that than just turning a card off).
    Sorry for my english!!

    Xabre wrote:
    Bit offtopic, but when you see a sentence like this:
    [  2461.966] (EE) this is a Muxless PX A+I platform, we doesn't supported it
    how can you expect anything from the driver?
    You are right, that's why I said that it suggest that my system is not compatible with fglrx. I don't understand why the warning just before that error line says that I should uninstall fglrx because my system is Muxed and that line says that my system is muxless...
    Anyways, it doesn't matter, the fact is that fglrx doesn't work, so I will be using the open-source drivers...

  • GFX Card) Intel(r) 82815 Graphics Controller

    when i play counter strike or other games my fps drops i have tryed every thing even down to reformating
    i think i got a onboard gfx card but when i look in bios i theres no option to disable it  (GFX Card) Intel(r) 82815 Graphics Controller.

    If you are using the integrated VGA of an i815 chipset it's really not worth anything.
    Have a look in the device manager what display adapter is installed.
    If the integrated VGA is in use it will be disabled the moment you install an AGP card, there isn't a manual disable option.

  • Radeon 9000 vs Intel GMA X3100 graphics

    which is better Radeon 9000
    or the intel GMA x3100
    graphics card
    because i want to play sims 2 on a new macbook
    thanks

    Good morning,
    Well, this is not an easy, clear cut question. The Radeon is an old, out of date card however it does have a dedicated GPU and Memory on board. The 3100 is an integrated chip with shared system memory, however, it is much newer and up to date.
    I'd put my money on the 3100 myself, however, neither is really up to the task of playing The Sims 2 in my opinion, that game (on the PC) taxed my CoreDuo with a GeForce 7900GT. :P
    Hope this helps! 
    David

  • Unstable Intel(R) HD Graphics driver file

    Blue screen crashes caused by unstable driver file.
    (igdpmd64.sys) in Screen Display drivers.
    Caused multible crashes, until I disabled Intel(R) HD Graphics Family.
    Now Windows wants to keep shutting down the other graphics driver (which is a low resolution driver) and reinstalling the faulty one. Driver updates show I have the latest. But It crashes as soon as its reloaded.
    How can I get a new HD Display driver and load it as a replacement?
    Ciao

    Hi @Daldraft ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue with crashing or the Blue screen on your HP Notebook. I found that if you try to remove the Microsoft update KB2670838. This could be causing the error.
    But, I would be happy to assist if needed as there are many models of HP Notebooks,  I would need the model number. How Do I Find My Model Number or Product Number?
    Please respond with which Operating System you are running:
    Which Windows Operating System am I running?
    Please let me know.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Today I stupidly tried to install CUDA accelerator forgetting I have Intel/AMD combo graphics card and not NVidia. Now when I try to launch AE or PremierePro I get this Last log message was: 140735120521568 GPUManager 2 Sniffer Result Code: 3 Help

    Today I stupidly tried to install CUDA accelerator forgetting I have Intel/AMD combo graphics card and not NVidia. Now when I try to launch AE or PremierePro I get this Last log message was: <140735120521568> <GPUManager> <2> Sniffer Result Code: 3.  I have trashed the CUDA program and reinstalled Premiere and AE but no joy.  Same message followed by another error box with options to Retry, Send to Apple or ignore.  I have tried all 3 options but nothing works!  Every time I launch either program same message appears.

    Hi? today i too have this problem.
    I found a solution here: https://discussions.apple.com/message/25137524#25137524
    Now all good.
    Good luck!

  • Satellite Pro L300: x3100 and Intel 965 chipset graphics driver update

    Has anyone else installed the Intel 7.15.10.1666 driver, dated 26/02/2009 for the Mobile 965 chipset? Here's their web page for getting to the download:
    http://www.intel.com/support/graphics/intelgm965/
    For some reason unknown to me, Toshiba Satellite Pro L300 doesn't work with the Intel auto driver update (the download with the exe file). Therefore I followed their instructions for a manual install (the download with the zip file).
    My laptop is working just fine with this new driver, and there is a definite improvement in the transitions between images when using the Windows presentation option (slideshow).
    This new driver also installs 3 graphics programs from Intel:
    Hotkeys for display management
    System tray access
    TV wizard
    I used Windows Defender to remove these 3 from programs that automatically load at system startup to keep a fast boot time and not load unnecessary programs into memory. This hasn't caused me any problems.
    Why hasn't Toshiba added this to the driver downloads page?

    Hi
    Thanks for this info mate...
    > Why hasn't Toshiba added this to the driver downloads page?
    Who knows maybe it has not been checked, approved and tested by Toshiba?
    As far as I know every notebook manufacturers test and approve the drivers before they will be released on the driver pages
    Maybe it has not been approved...
    However, its good news that this driver is working properly.
    I will check it too on my notebook.
    Cheers

  • Adobe Premiere Pro CC and Intel Iris Pro Graphics in Macs

    Hey everyone,
    Does anyone know if Premiere Pro CC supports GPU acceleration with Intel Iris Pro Graphics from the new Macbook Pros? This video from Intel clearly shows that it's possible for Windows but what about Macs?
    http://software.intel.com/en-us/videos/accelerating-video-production-with-opencl-and-intel -iris-graphics
    I'm interested because I know OpenCl performance with Iris Pro should be stellar compared to Nvidia 650m and 750m.
    Thanks!

    Good question. I'm also trying to figure that out. The 15" Macbook Pro has the Intel Iris Pro Graphics | NVIDIA GeForce GT 750M with 2GB. Whereas the 13" has the Intel Iris Graphics 6100. I prefer the smaller size laptop but am concerned about the Gfx.

  • The Adobe After Effects CC supports Intel (R) HD Graphics 3000 video card?

    The Adobe After Effects CC supports Intel (R) HD Graphics 3000 video card?

    Read this in detail:
    GPU (CUDA, OpenGL) features in After Effects CS6 and After Effects CC

  • Windows Update for windows 7 won't update the Intel Corporation - Display - Intel (R) HD Graphics

    Hi there, a couple of times the windows update on my windows 7  won't update the Intel Corporation - Display - Intel (R) HD Graphics.
    What could be the problem?
    How can this be solved?

    Hello palette35,
    Welcome to the community.
    You’re having problems with windows not updating the graphics.
    It could be security setting blocking the update
    You can go to HP.com and download the driver directly.
    Here is a link to the site. You’ll need your product number.
    Let me know if this helps.

  • Preobelm with intel (R) hd graphics 3000

    hi guys how are you ?
    I have hp pavilion g6 1066se with windows 7 64bit home premuim 
    when iam trying to install the intel graphics but the system returned the following error:"This computer does not meet the minimum requirements for installing the software"
    my graphic is intel (R) hd graphics 3000 
    need your help 
    plllllllllllllllllllllease

    Hi Alqosh,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion g6-1066se Notebook and not able to install the HD graphics. Here is a link to the drivers for your system's Intel graphics.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Maybe you are looking for