Is "Introduction to Data Acquistion" by R. King a good reference for learning data acqusition programming?

Is "Introduction to Data Acquistion" by R. King a good reference for learning data acqusition programming? Or can someone recommend a better text.
Solved!
Go to Solution.

Perfect, just what I was looking for.
Just curious is there a concise index for tutorials such as the one your pointed me toward?
Thanks!

Similar Messages

I have multiple profiles and want to go back to a single profile without losing data or programs that are not shared

Hi
I need help
My partner has set up multiple profiles on the iMac and has not done the sharing of files and software correctly. Therefore we have some programs that do not operate in all profiles. I want to go back to a single profile but need to be sure I am not going to lose any data or programs in the process.
Can any one give me a step by step guide - I am not mac savvy.
Thanks in advance

Hello!
I recently just downloaded the 'Waze' app as a backup for my Garmin. I've read a few reviews that seem to rant and rave about how good the GPS app is. It is community driven and maps are constantly being updated by users. Plus it has a few other fun stuff in it (something similar to Gasbuddy where you can owe prices on the map). But like the person above me said, there is lots of useful free GPS apps in the App Store.
Oh and I may be wrong but I remember reading an article about Google being slower about updating its maps system--ie no turn by turn voice, which many people have had complaints about.
Happy Searching!
Ps - if you switch I wouldn't go to Blackberry.

'Error 8 occurred when starting the data extraction program'

Hello Experts,
I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
But when I check the extractor through RSA3, it looks fine.
Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
Thanks
Regards,
KP

Hi,
Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
rgds,
Edited by: Krishna Rao on May 6, 2009 3:22 PM

The standard SAP data transfer program for vendors

Hi Experts,
Could u please tell me that wt is the program which is <b>"the standard SAP data transfer program for vendors"</b>?
could you plz tell me what exactly is it?
and itz tcode..
is it the "XK01" only or anything other?
thnx
Message was edited by: sey ni

Hi,
Pl use RFBIKR00 for Vendor Matser upload. Th eProgram documentation is very useful too.
Regards,
Suresh Datti

Data Migration program for opportunity

Hi SAP Experts,
Please can one help with the Data Migration program for opportunity.
I want to know the approach.
These are few mandatory filed
1. Opportunity Name
2. Account
3. Contact
4. Opportunity Owner
5. Total Estimate/Curr* value_ currency
6. Project start date ---
7. Stage
8. Probability
9. Status
10. Product with Item category ZSOL
11. Service
12. Service Offering
Regards,
Jaya

Hi,
As suggested by Kai you can use LSMW. This will be better option as it is very easy to use and you can also write routines while mapping the fields. You can also use IDOCs for importing data from Legacy system.
If you want to write a report then you can use BAPI_BUSPROCESSND_CREATEMULTI. Please refer to the documentation of this BAPI. This BAPI internally calls CRM_ORDER_MAINTAIN. Do not forget to call BAPI_BUSPROCESSND_SAVE to commit your data.
Regards,
Sandeep

What program to replace a Data Base program like old AppleWorks?

Not sure if this is the correct discussion board, but I would like to find out what applications people are using to replace the AppleWorks Data Base program. In the past I have worked with File Maker Pro and the AppleWorks program. I see nothing like that in either iBook or Numbers.
Thanks,
Dave

Like Dennis, I continue to use AppleWorks for what iWork doesn't do. I think that sooner or later a system upgrade may render AppleWorks useless or, at least, too unstable. I plan on keeping at least one Mac in the house running an OS AppleWorks works in.
In the meantime, I have left a few feedback posts to both the Numbers team or the Pages team.

Simple Data Base Program for Mountain Lion

Does anyone have a recommendation for a simple data base program that will import comma delimited fields from early versions of Filemaker Pro (v 3.0, v5.0)
The ability to import Filemaker Templates and Layouts would be a big plus.
I do not need the a highly sophisticated program just something with the ability to import data from several different data bases and create layouts that look like I want them to look.
Also what is the earliest version of Filemaker that will run well on Mountain Lion ?
Thanks....Ken

I suggest Bento (by Filemaker), simple database, imports Filemaker Pro files and doesn't cost very much

Data base program with Leopard?

On my old G5 I used Apple Works data base program. I still have it on my new machine but wonder if there is a new data base program like Pages is the new WP program.
Thanks!
TMW

No, iWorks does not come with a database application - word processing, presentation, and spreadsheet.
If you need a high-powered database program there's a pretty good one in Open Office 3.0rc3 or NeoOffice Aqua. For a basic database program try iData. For one sort of in between try Bento - VersionTracker or MacUpdate.

Data base program

Is there a free easy to use data base program I can use to keep track of the books my wife reads. She is constantly borrowing books she has already read.
I would like to make her a list to check against. The program should alphabetize automatically as the titles are added.

I almost totally forgot about Delicious Library. I own it actually. It uses your iSight camera to scan in title, author, etc and can do all the things that you asked about in your post.
http://www.delicious-monster.com/
Hope this is helpful.
JB

Data conversion program

can u give idea about data conversion program for inventory management program stocks,which reads legacy extract file and the valuation master file from pc gets issue storage location valuation details and output a file with these details
regards,
phani

Hi Phani,
Make sure that the data from legacy system is stored in a TXT file in a specific format.
In SAP, create a program to upload the file using FM GUI_UPLOAD. The structure of the internal table will be same as that of the file.
Upload the data and update the necessary tables.
Best regards,
Prashant

Best way to move data and programs to another profile on same Mac?

Hello,
What is the best way to move data and programs to another profile on the same Mac? I have a user who's profile is corrupt, I know that most programs will work on both the new and old profile however when trying to copy the Desktop folder, or Documents folder I am getting permissions denied.
Sort of like weeding a garden, I'm hoping I do not have to pick the data in each folder and copy individually.
Thanks for your help!
Johnathon

This usually means that a configuration or preference file is corrupted. In this user's /Home/Library/Preferences/ folder locate any preference files associated with iLinc and drag to the Trash.
I would also check in the /Home/Library/Caches/ folder for a file or folder associated with iLinc and delete as well.
See if the problem is resolved in the user's normal account.
It's not that you cannot copy data from account to account, but doing so causes a lot of permissions issues that must be resolved. The MacFixit article I linked above shows what you need to do after transferring from one account to another in order to change permissions on the "foreign" files to those of the destination account.

Are there any advantages to using a Data Value Reference for LabVIEW Classes?

Hi
I recently came across an example where the developer had used a data value reference for the class cluster in LabVIEW.
What are the advantages of doing this?
Doesn't the use of LV objects already avoid the creation of multiple copies of data thereby reducting memory usage?
Thanks
AD

LabVIEW's OOP is implemented as a By Value. This means, as Tst stated, branches in wires could mean copies in the object. The DVR is a way to make it By Reference.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Master data Synchronizing program in BCS

Hi,
When i executing Master data Synchronizing program:UGMD_BATCH_SYNC .Where i got the selections
and i have given below selection conditions to run the program.
application = 10
application area = FL
Field Name = /1FB/COMPANY
Synchronization Mode:You can use either supplementary synchronizing or Full synchronizing.
Which synchronizing mod need to use to synchronize the masterdata.
Is it fine if select Field Name = /1FB/COMPANY ? in the selections.
I have added new cost centers in cost center hierarchy i am executing the program to synchronize the mastered between BW and BCS.
Please some one advise me in this scenario

Dan,
Replicate in BW where all the fields are not replicate mode except item.
When i was try to load the data where i am not able to load data for new company 100 and warning is saying these records are ignored.
The error message
5 of 5 data rows were ignored
Message no. UCF7017
Diagnosis
A total of 5 data records were read from file C:\Documents and Settings\Laxmikant.dube\My Docume. Of those, 5 records contain parameter settings that exceed the user limitations for executing the data collection task.
System response
The ignored records were not checked any further and will not be written.
Procedure
Make sure that the ignored records are irrelevant for the current task. If some of the ignored records were supposed to be written, then the file probably contains an error.
In this case, closely examine the settings for the fields Version, Fiscal Year, Period, Group Currency, and Consolidation Units in the file.
If you have more than one characteristic with the role consolidation unit (a socalled "matrix organization"), also check whether the settings in the ignored records refer to valid combinations of consolidation units.
What would be the issue?
Edited by: Prasad B on Oct 7, 2008 7:16 PM

Date Type programming

We need to write an ABAP program, which includes getting access to the Dates in a Transaction. These Dates are dynamically computed at run time, based on Date Rules, which are created when configuring Date Management in the IMG. Has anyone does this? Are there Function Modules, which are delivered to assist?
The way it works is that a date is entered, such as Start Date, then a Date Rule is chosen for End Date, adn teh system automatically computes the End Date and displays it in the transaction.
Our specific case is to get to the CRM system Opportunity Milestone dates; however, since IMG Date Management and Configuration is available in all SAP systems, I assume there are also other transactions in other SAP systems (R3, etc) which also dynamically calculate dates based on teh cofigured rules - so that is why I open this question out to anyone who may have been called upon to do similar Date calcluation programming.

SG_PS_GET_LAST_DAY_OF_MONTH
BKK_GET_MONTH_LASTDAY
SLS_MISC_GET_LAST_DAY_OF_MONTH
RE_LAST_DAY_OF_MONTH
check the above FM's.
Regards
vijay

Error 7 occurred when generating the data transfer program

Hello All ,
In Master Data Load Process Chain , we get error like
1. System Response
Caller 09 contains an error message.
Diagnosis
Error 7 occurred when generating the data transfer program for the requested InfoSource.
System Response
The data transfer is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
Note : We faced this issue for two days now . Just repeating the load make it success .
If any one faced and fixed this issue . Please let me know .
Thanks in advance .

Hi,
. Initially goto transaction SE38, Run the program RSDS_DATASOURCE_ACTIVATE_ALL. Give your Datasource name, and source system and check the check box for "Only Inactive objects".
This will actiavate the given datasource.
2. Replicate the datasource in RSA1.
3. Try to schedule the infopackage for the datasource which you have activated now.
4. IF infopackage runs through, Repeat the process for all datasources ie uncheck the check box, which means it will activate all datasources for the source system.
Also make sure that there will be enough Back Ground Processor available....
Reduce the parallel process
Thanks
BVR

Is "Introduction to Data Acquistion" by R. King a good reference for learning data acqusition programming?

Similar Messages

Maybe you are looking for