Is ios8 creating problem in iphone 4s like hanging and speed slow

Abisawave wrote:
what's interesting, is that before the phone was purchased, literally everything was replaced, and in the back camera, instead of it just being black, it has a green tint.. although why is it showing up on my iphone.. and on my front facing camera.. which does not have a green tint to it?
Does it need a trip to the Apple Store?
Where did you get all of this work done on the phone? If you did not have it serviced by Apple, taking it to an Apple store will not do you any good if was opened by anyone else but Apple. They will no longer service the device, even for out of warranty replacement.
It does seem to me however, that the camera sounds like it is failing.

Similar Messages

After ios7 update my iphone is like android os dead slow processing , too fast battery drain,calling process is too low where is apple brand going my friends 11 members using iphone all are got this problem one thing fans like me y they spoil his name ??

after ios7 update my iphone 4 is like android os dead slow processing , too fast battery drain,calling process is too low where is apple brand going my friends 11 members using iphone all are got this problem one thing apple have unique and unique fans like me why they spoil their name like this update iam too disappointed iam not say for oppose apple iam say for feedback to grow apple in world because i love apple more please solve it
by real customers
iPhone 4, iOS 7, iam apple suporter

please help me after ios7 update my phone is tooo slowww i want my old iphone

Problem of PCI express link width and speed

hello,
I instantiate the pci express core v1.7 into a pci express endpoint and the core was configured as GEN I x8 or GEN II x4. By using the example design Xilinx offered in the ipcore dir, I could read and write device by PIO mode.
However, when I check the device’s link width and speed by using lspci –vvvv in Linux, I found that no matter what configurations I set, the device link is always trained as GEN I x1, which means the throughput of device, reduce 8 times. May the most important problem is that all logic in the user layer upon transaction layer are written at 250MHz, and if link width and speed are limited 2.5G/T and x1, I need to change user logic circuit which is a huge work.
So my question is how to change the PCI express link width and speed in OS side, or I need to change a new motherboard?
(I guess it related with motherboard, and I check that the PCI express slot in motherboard support GEN II X16. Another issue, when I insert a PCI express GEN II x8 device, the device is also trained as GEN I x1).
lscpi -vvvv
01:00.0 RAM memory: Xilinx Corporation Device 6018
Subsystem: Xilinx Corporation Device 0007
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfcff800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [60] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range B, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Device Serial Number 00-00-00-01-01-00-0a-35
Kernel driver in use: card

I also have this issue of the user_link_up is high and everything looks good but the LnkSta widht is 1x. did you ever get any guidance about this?

IOS8 bluetooth problem on iPhone 4S

Apon upgrading to ios8 my iPhone 4S connects to my cars bluetooth car kit (Toyota Venza 2011) but every time I place a call from my car the call drops from my car and i am only able to speak on my phone only.

Go into Settings on the phone and remove the vehicle from the list. Turn off Bluetooth and then perform a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo. After the phone restarts, go to the vehicle and remove the phone from the list of paired devices. Turn the car off and then back on again. Put the vehicle into discovery/pairing mode. Go into Settings on the phone and turn Bluetooth on. The devices should connect.

Problem with iPhone Headset after plugging and unplugging from PC

Hello
First I would like to introduce myself, My name is Lukasz and I can very happy customer company Apple.
but...
I have one problem, which is really annoying , I hope that someone will be able to help me...here we
A 3 months ago I bought a Apple Headset for my iPhone 4s. After realising iPhone 5 there also been realeased new iPhone headset.http://static5.businessinsider.com/image/50451874eab8eab73c000005-960/iphone-5-h eadphones-rumor.jpg
http://static5.businessinsider.com/image/50451874eab8eab73c000005-960/iphone-5-h eadphones-rumor.jpgHere is a link but you probably all know what I mean.
To last couple days I was saying that Apple is the best, its Quality, Its something amazing, most amazing accessories I ever had.
But I plug this headset into the normal PC in a college library...quest what happen after that?
buttons for volume stop working I can only use the headset to listen to music now but I cant change any volume or double click to change the song.
Since I plugged in and unplugged it into PC they just do not work. (it was a first time when I plugged them into PC since I bought them).
I heard from a few people that they have the same, but you now, its not supposed to happen like that.
Such a simply stuff and "all that amaziness and greatness" its not the same now
Does anyone have solution for that?
I cant afford to speend another £30 for headset because I plugged them into PC and they do not work any more...
Please Help,
Regardless
Lukasz

@aion321
Welcome to the forum!
AFAIK you would need adapter similar to this one:http://www.currys.co.uk/gbuk/kit-5300auadp-3-5mm-audio-adapter-for-nokia-mobile-phones-07960271-pdt....
Happy to have helped forum with a Support Ratio = 42.5

Problem with iPhone displaying contacts sms and calls

my iphone suddenly stopped displaying callers names and just displays incoming numbers. same thing happens for sms. any solutionnS

A number of Verizon users have issues with numbers not being formatted correctly, resulting in the problems you are seeing. This has resolved it for many:
Dial *228 on your iPhone. This is a Verizon over-the-air programming number.
When the system answer press 1 for "Program or activate your phone"
Wait for the call to disconnect. You should get a prompt stating "Settings updated."
Double tap the Home button to bring up the recently used apps list at the bottom. Locate the Phone, Message, and Contacts apps, swiping if necessary, and press the red minus sign to stop them.
Wait a 3-5 minutes.
Open the Message App to verify the fix.

Have a problem with iPhone 4s crashing constantly and the battery warms up a lot each time it crashes

II need help. My iPhone 4s keeps on crashing then the battery heats up after that. Each time it becomes difficult to turn it back on. What do I do

I am having this problem. Started on 1 Jan 2012 – don't know if that is significant. It first crashed in iTunes but now it crashes after a few minutes of any activity. I have reset to original settings and restored but it even keeps crashing during this.

Hi I was using my iPhone 4s like normal and all of a sudden my touch has completely stopped working I have resettled my iPhone numerous times I don't know what to do ?

My iPhone 4s touch has completely stopped working resettled numorous times still won't work

In iTunes, select iTunes Store under STORE, scroll to the bottom and change the flag (bottom right) to the country where you are.

Create web template according workbook - like view and query?

Hi,
Is it possible generate automaticaly (or manualy) web template according workbook. I can create templates in designer only for query or view but not workbooks.
<param name="TEMPLATE_ID" value="NAME_WORKBOOK"/> DOESNT WORK
THANKS

Hi Zdenek,
this is technical not possible, because this is a totally different technology. May you can achieve this with a lot of ABAP Coding. First you need to know which queries are in the workbook. You can get this with Funtion Module:
RRMX_WORKBOOK_QUERIES_GET
Now you must create a WebTemplate:
May you do that in ABAP two. Create a big string with all the tags the webapplication designer creates normally. After that you must store that template to database:
The ABAP OO CLass CL_rsz_www_db_interface has a methode called SET_template. I recommend to record a trace with transaction rsrtrace, to see what kind of parameters are necessary to store a template to database. After that you can execute the newly created template in browser.
But i do not exactly know why you want to do this stuff.
And it is definately not recommended to do such things.
best regards
Kai Wachter

Sync Problem on OUTLOOK fields like Address and no...

OVI does copy outlook address and Note fields on its base (and on the Nokia base), but NOT onto the mobile although Memory size is big enough (see later). Sync message is "success".
I restarted from scratch to avoid all conflicts (Phone, Ovi and Nokia internet base totally emptied). Sync works OK and copies outlook contacts fully on its own base, but address fields are not copied onto the mobile (Telephone connected via USB)
The only way I found to get them onboard was to copy contacts (drag & drop) from Ovi onto the phone. Unfortunately, this causes all other fields (Phone numbers, E-mail) to be copied again as if they were additional fields and synchronization pushes all theese additional fields on Ovi Data base and Nokia data base. Finally I get a base not usable to be transferred on other phones.
I suppose this is because Nokia software does not recognize Telephone 2 or address 2 outlook fields as such. It would be ok with me if I had a way to get all existing outlook address fieds being copied at the beginning. Thanks for any help

Hi!
I am using a X3-02 with Ovi Suite and seem to have the same problem.
I'm also interested to find a solution.
There seem to be several cases with different phones and Ovi Suite as well as Nokia PC suite discussed in this dicussion portal. But I didn't find any solution here.
Some details from my case maybe extend the picture of the problem:
Outlook and Ovi Suite (latest version, updated today) exchange contact data as desired (Names, multiple phone numbers, provate and business addresses, notes, ...). The address data is visible and editable in the Ovi Suite.
Ovi Suite and Nokia X3-02 "successfully synchronize" (as stated by Ovi Suite) contacts. But there are no addresses (or sometimes only the country)! Names, numbers, e-mail-address and notes are available.
Deleting all contacts on the mobile and resynchronizing does not solve the problem.
Editing the contacts in the Ovi Suite and synchronizing afterwards does also not solve the problem.
Looked for some information about field mapping (assignment from one source to another, sometimes possible when exporting from Outlook), but didn't find any hint.

Syncing with iTunes and now my iPhone is like locked and is stuck on the cable pointing towards iTunes and emergency call.

Syncing with iTunes and then asked if wanted to update the software version and i clicked yes (update). when update was nearly finished a screen showed up on itunes with an error say " the sim card insertted in this iPhone does not appear to be supprted"
when disconnected and connect it back to the computer - it still shows the same thing. (sim card not compatible with iPhone)
now my iphone is stuck/ frozen on a screen showing a cable pointing towards itunes and emergency call.
now my iPhone itself won't let me go to the home screen (with or without my sim card.)
PLEASE HELP !!!!!!
REALLY NEED HELP !!!!!

See more:
http://support.apple.com/kb/ht1808

Iphone apps updates hang and can't access apps

I presently have 4 apps needing updates, but they're hung up saying "installing" but not installing. Can't use the apps in this condition. Also can't delete them so as to reinstall them (they're all free ones). When I push on one of the apps the other apps start jiggling, but not the one I'd like to uninstall and try again (which says 'waiting'). I've tried the method of hold both buttons, shut down, with and without signing out first. Nothing changes. One community response suggested resetting all the settings on the phone. If that's the best answer, I'd like to know exactly what kind of tedious work that would require. Thanks

Where did you change the settings in Kaspersky? I've got IS 10 and haven't found the setting to change that will let iTunes download the updates for the apps. Your response is greatly appreciated.
Thanks,
Willie

Iphone 3s itunes hangs and the screen is unresponsive?

When I link into the cloud and try to get songs onto my phone , sometimes it just blanks out and hangs. Or track stops and the screen becomes unrespnsive. Home button works but itunes is a zombied gonner.
Iphone 3s itunes 10.6.1 (7)
Makes me think I shall not renew subscription to cloud,,, as it is more iffy than mobile me.

Try restarting your phone by holding the lock button and home button.

Can Anyone tell me the problems of iphone 5

Hello
Can Anyone one tell me the problems in iphone 5 when released and what have been fixed ?
Thanks In Advance.

Nope. No problems with my iPhone 5 or the other two my family use.
Most of the posts to these forums are from people having problems which the majority of users do not experience.

Java Audio Metronome | Timing and Speed Problems

Hi all,
I’m starting to work on a music/metronome application in Java and I’m running into some problems with the timing and speed.
For testing purposes I’m trying to play two sine wave tones at the same time at regular intervals, but instead they play in sync for a few beats and then slightly out of sync for a few beats and then back in sync again for a few beats.
From researching good metronome programming, I found that Thread.sleep() is horrible for timing, so I completely avoided that and went with checking System.nanoTime() to determine when the sounds should play.
I’m using AudioSystem’s SourceDataLine for my audio player and I’m using a thread for each tone that constantly polls System.nanoTime() in order to determine when the sound should play. I create a new SourceDataLine and delete the previous one each time a sound plays, because the volume fluctuates if I leave the line open and keep playing sounds on the same line. I create the player before polling nanoTime() so that the player is already created and all it has to do is play the sound when it is time.
In theory this seemed like a good method for getting each sound to play on time, but it’s not working correctly.
At the moment this is just a simple test in Java, but my goal is to create my app on mobile devices (Android, iOS, Windows Phone, etc)...however my current method isn’t even keeping perfect time on a PC, so I’m worried that certain mobile devices with limited resources will have even more timing problems. I will also be adding more sounds to it to create more complex rhythms, so it needs to be able to handle multiple sounds going simultaneously without sounds lagging.
Another problem I’m having is that the max tempo is controlled by the length of the tone since the tones don’t overlap each other. I tried adding additional threads so that every tone that played would get its own thread...but that really screwed up the timing, so I took it out. I would like to have a way to overlap the previous sound to allow for much higher tempos.
I posted this question on StackOverflow where I got one reply and my response back explains why I went this direction instead of preloading a larger buffer (which is what they recommended). In short, I did try the buffer method first, but I want to also update a “beat counter” visual display and there was no way to know when the hardware was actually playing the sounds from the buffer. I mentioned that on StackOverflow and I also asked a couple more questions regarding the buffer method, but I haven’t received any more responses.
http://stackoverflow.com/questions/24110247/java-audio-metronome-timing-and-speed-problems
Any help getting these timing and speed issues straightened out would be greatly appreciated! Thanks.
Here is my code...
SoundTest.java
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
import java.io.*;
import javax.sound.sampled.*;
public class SoundTest implements ActionListener {
    static SoundTest soundTest;
    // ENABLE/DISABLE SOUNDS
    boolean playSound1 = true;
    boolean playSound2 = true;
    JFrame mainFrame;
    JPanel mainContent;
    JPanel center;
    JButton buttonPlay;
    int sampleRate = 44100;
    long startTime;
    SourceDataLine line = null;
    int tickLength;
    boolean playing = false;
    SoundElement sound01;
    SoundElement sound02;
    public static void main (String[] args) {
        soundTest = new SoundTest();
        SwingUtilities.invokeLater(new Runnable() { public void run() {
            soundTest.gui_CreateAndShow();
    public void gui_CreateAndShow() {
        gui_FrameAndContentPanel();
        gui_AddContent();
    public void gui_FrameAndContentPanel() {
        mainContent = new JPanel();
        mainContent.setLayout(new BorderLayout());
        mainContent.setPreferredSize(new Dimension(500,500));
        mainContent.setOpaque(true);
        mainFrame = new JFrame("Sound Test");
        mainFrame.setContentPane(mainContent);
        mainFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        mainFrame.pack();
        mainFrame.setVisible(true);
    public void gui_AddContent() {
        JPanel center = new JPanel();
        center.setOpaque(true);
        buttonPlay = new JButton("PLAY / STOP");
        buttonPlay.setActionCommand("play");
        buttonPlay.addActionListener(this);
        buttonPlay.setPreferredSize(new Dimension(200, 50));
        center.add(buttonPlay);
        mainContent.add(center, BorderLayout.CENTER);
    public void actionPerformed(ActionEvent e) {
        if (!playing) {
            playing = true;
            if (playSound1)
                sound01 = new SoundElement(this, "Sound1", 800, 1);
            if (playSound2)
                sound02 = new SoundElement(this, "Sound2", 1200, 1);
            startTime = System.nanoTime();
            if (playSound1)
                new Thread(sound01).start();
            if (playSound2)
                new Thread(sound02).start();
        else {
            playing = false;
SoundElement.java
import java.io.*;
import javax.sound.sampled.*;
public class SoundElement implements Runnable {
    SoundTest soundTest;
    // TEMPO CHANGE
    // 750000000=80bpm | 300000000=200bpm | 200000000=300bpm
    long nsDelay = 750000000;
    long before;
    long after;
    long diff;
    String name="";
    int clickLength = 4100;
    byte[] audioFile;
    double clickFrequency;
    double subdivision;
    SourceDataLine line = null;
    long audioFilePlay;
    public SoundElement(SoundTest soundTestIn, String nameIn, double clickFrequencyIn, double subdivisionIn){
        soundTest = soundTestIn;
        name = nameIn;
        clickFrequency = clickFrequencyIn;
        subdivision = subdivisionIn;
        generateAudioFile();
    public void generateAudioFile(){
        audioFile = new byte[clickLength * 2];
        double temp;
        short maxSample;
        int p=0;
        for (int i = 0; i < audioFile.length;){
            temp = Math.sin(2 * Math.PI * p++ / (soundTest.sampleRate/clickFrequency));
            maxSample = (short) (temp * Short.MAX_VALUE);
            audioFile[i++] = (byte) (maxSample & 0x00ff);
            audioFile[i++] = (byte) ((maxSample & 0xff00) >>> 8);
    public void run() {
        createPlayer();
        audioFilePlay = soundTest.startTime + nsDelay;
        while (soundTest.playing){
            if (System.nanoTime() >= audioFilePlay){
                play();
                destroyPlayer();
                createPlayer();
                audioFilePlay += nsDelay;
        try { destroyPlayer(); } catch (Exception e) { }
    public void createPlayer(){
        AudioFormat af = new AudioFormat(soundTest.sampleRate, 16, 1, true, false);
        try {
            line = AudioSystem.getSourceDataLine(af);
            line.open(af);
            line.start();
        catch (Exception ex) { ex.printStackTrace(); }
    public void play(){
        line.write(audioFile, 0, audioFile.length);
    public void destroyPlayer(){
        line.drain();
        line.close();

Thanks but you have never posted reply s0lutions before ?? And F 4 is definitely not 10 times faster as stated before I upgraded !!

Is ios8 creating problem in iphone 4s like hanging and speed slow

Similar Messages

Maybe you are looking for