Is Ipad1 still secure considering the company has not kept the operating systems up to date for this model?

Is Ipad one still secure considering Apple has not provided it with the proper operating systems?

With Firmware updates, Apple will usually offer instructions to complete the update, since they require an additional step to complete. It sounds like you haven't finished the Firmware update completely.
Since it's your computer and investment, I wouldn't risk it and would visit your local Apple Store and let them solve the problem. In the meantime, read this link from Apple:
http://support.apple.com/kb/HT1557?viewlocale=en_US&locale=en_US
...to bring you up to date on the procedure.

Similar Messages

HT4623 After updating my IPAD 64 the typing has not been the same. It takes 3 minutes to type in my password.

After updating my IPAD 64 the typing has not been the same. It takes 3 minutes to type in my password. Has anyone found a repair for this?

Reset all settings
Settings>General>Reset>Reset All Settings

TNS-01169: The listener has not recognized the password

Dear All
I am using Oracle8 Enterprise Edition Release 8.0.5.0.0 on Windows XP
My problem is that
When I tried to stop listener by using lsnrctl80 stop it gives me the subjected error,
while when I stop the listener from Windows Servcies it stops successfully.
Plz note that when I start listener by using lsnrctl80 start it starts successfully.
Following is the information of listener.ora
LISTENER =
(ADDRESS_LIST =
(ADDRESS=
(PROTOCOL= TCP)
(Host= it-rhassan)
(Port= 1521)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = 0
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = it-rhassan)
(SID_NAME = GL)
(SID_DESC =
(GLOBAL_DBNAME = it-rhassan)
(SID_NAME = ERP)
PASSWORDS_LISTENER = (oracle)
Plz note that I alsed tried to give password same as the internal passwrod, and remove PASSWRODS_LISTENER but same error occured in each cases.
Thanks in advance for your help
Hassan

I did not find the exact solution on the suggested site. only found the Error Code and description.
Then I searched on Google.com and found following result which has successfully solved my problem.
LSNRCTL> change_password
Old password:
New password:
Reenter new password:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DBDEV1)(PORT=1526)))
TNS-01169: The listener has not recognized the password
LSNRCTL> set password
Password:
The command completed successfully
LSNRCTL> change_password
Old password:
New password:
Reenter new password:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DBDEV1)(PORT=1526)))
TNS-01169: The listener has not recognized the password
LSNRCTL>
Regardless of how you enter the password, through a single line or on the prompt, the change will not be successful. To change the password, you have to remove the line passwords_listener in the file listener.ora and then change the password.
Thanks
Hassan

Autoscale has not been able to read any monitoring data for ...

We´re receiveing an Error Message from the Autoscale functionality for a complete week now. This has happened before when the "Storage incident" happened. But the problem was resoloved when the functionality of the Storage was fixed. But since
the 22th of December it seems that the autoscaling dosn´t work any more. All of the Autoscaled Machines are up while we´re having almost no traffic during the holidays.
Is there someone who has a solution? Or is this one of these "drop all machines and recreate them" issues?
The error message is:
Autoscale has not been able to read any monitoring data for XXX:XXX since 12/22/2014 11:39:01 AM UTC
Autoscale task failed for XXX:XXX due to no metrics available

Hi Marc,
We could view the
latest information from Azure Dashboard
http://azure.microsoft.com/en-us/status/#history
12/22
Storage - East US - Partial Service Interruption
From 10:10 to 11:40 UTC on 22 December, 2014 a limited subset of customers using Storage in East US may have experienced intermittent latency or time out errors when attempting to reach storage resources. This incident has now been mitigated.
Since
Autoscale requires monitoring data to be collected from your VM/role instances in order to scale . While
there have network issue on the storage
accounts that contain your monitoring data, so it will fail to autoscale.
Now, this incident has now been mitigated.I suggest that you could check if
Autoscale work vey well.
In addition,I suggest that you could refer to the link below
for more details regarding Autoscale not working:
https://social.msdn.microsoft.com/Forums/azure/en-US/bc2048c4-8d49-4c54-b150-f263808c4b7a/notification-could-not-automatically-scale-xxx-because-monitoring-data-was-not-found?forum=windowsazuremanagement
Best Regards,
Kevin Shen.

Lsnrctl status , the listener has not recognized the password

lsnrctl statusthe listener has not recognized the password
what the command to give the listener password, i know its password...

C:\>lsnrctl
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 08-FEB-2008 21:28
:33
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> help set
The following operations are available after set
An asterisk (*) denotes a modifier or extended command:
password rawmode
displaymode trc_file
trc_directory trc_level
log_file log_directory
log_status current_listener
inbound_connect_timeout startup_waittime
save_config_on_stop
LSNRCTL>
LSNRCTL> set password test
The command completed successfully
LSNRCTL>

My itunes will not let me log in because it says that the account has not been used before. How can I fix this?

My itunes on my computer will not let me log in, because it says that the account has never been used. Help me.

Hello zahler4,
Welcome to the Apple Support Communities! This is a common alert message when your Apple ID has not yet been configured for use with the iTunes Store. To configure it, you should have the option to “Review” - at which time you can add a payment method to your account. For more information, check out this resource:
Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store - Apple Support
http://support.apple.com/en-us/HT201762
When using the store for the first time, you must provide a payment method. After you configure the account you can change your payment information to None:
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
http://support.apple.com/en-us/HT203905
Cheers,
Matt M.

How do I access youtube videos on Safari? Resetting the browser has not fixed the issue.

So far the issue appears only with youtube. If I search, pressing "return" results in the image that's attached. (It has not reappeared in Firefox or Chrome. I just updated Firefox to 16.0.1 yesterday.)
It looks as though this might be an issue related to plugins, though I'm not sure how to proceed from here. All relevant software updates have been applied.

Try some fundamentals such as opening Disk Utility (Applications - Utilities - Disk Utility) and Repair Disk Persmissions, run this 2-3 times. You can also Reset Safari, go to Safari - Reset Safari - Check all Boxes. Also while you are in Safari ensure all your plugins are up-to-date. Safari - Preferences - Plugins (I believe) and update them.

Bulk Insert Task Cannot bulk load because the file could not be opened.operating system error error code 3(The system cannot find the path specified.)

Following error i am getting after i chnaged the Path in Config File from
\\vs01\d$\\Deployment\Files\temp.txt
to
C:\Deployment\Files\temp.txt
[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot bulk load because the file "C:\Deployment\Files\temp.txt" could not be opened. Operating system error code 3(The system cannot find the path specified.).".

I think i know whats going on. The Bulk Insert task runs by executing sql command (bulk insert) internally from the target sql server to load the file. This means that the SQL Server Agent of the target sql server should have permissions on the file you trying to load. This also means that you need to use UNC path instead to specify the file path (if the target server in on different machine)
Also from BOL (see section Usage Considerations - last bullet point)
http://msdn.microsoft.com/en-us/library/ms141239.aspx
* Only members of the sysadmin fixed server role can run a package that contains a Bulk Insert task.
Make sure you take care of this as well.
HTH
~Mukti
Mukti

AUDIO PROBLEMS when converting to youtube - When I export my file, parts of the audio are not working on ipads or iphones - any explanation for this?

I am posting videos to youtube and for some reason different portions of my audio are not working both on iphone and ipads... any thoughts on this would be appreciated

Try using psd. Some rerports indicate some confustion between the apps with TIFF. See:
https://discussions.apple.com/message/15921933#15921933
I cannot confirm, nor test, since I use PS CS5, and not Elements.
Ernie

AirDrop used to work between my iMac and MacBook Pro. Now, when I try to transfer a file (either direction) I get a message that my certificate is invalid or that the file has not been accepted. What do I do?

AirDrop used to work between my iMac and MacBook Pro. Now, when I try to transfer a file (either direction) I get a message that my certificate is invalid or that the file has not been accepted. What do I dot correct this?

Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186

Autoscale has not been able to read any monitoring data

I keep getting daily warnings that Autoscale cannot read metric or metric data is not available.
message is;
"Autoscale has not been able to read any monitoring data for centaur-ex since 3/4/2014 10:03:06 AM UTC"
what is the issue here?

Hi Dean,
Please refer the following link as it might provide you more information regarding Autoscale not working:
https://social.msdn.microsoft.com/Forums/azure/en-US/bc2048c4-8d49-4c54-b150-f263808c4b7a/notification-could-not-automatically-scale-xxx-because-monitoring-data-was-not-found?forum=windowsazuremanagement
Regards,
Manu Rekhar

The operation can not be completed because of an internal failure. A secure network communication has not been cleaned up correctly ... Iget this message when closing firefox. It obviously has been a problem in the past but I'm using FF 6

'''"The operation can not be completed because of an internal failure. A secure network communication has not been cleaned up correctly ... '''"Iget this message when closing firefox. It obviously has been a problem in the past for others but it has only happened to me since updating to firefox6'''

Try to clear the "Active Logins" via Clear Recent History
*https://support.mozilla.com/kb/Clear+Recent+History
You can also try to delete the file secmode.db in the Firefox Profile Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder

Hello , Recently my company purchased a Fujifilm X30 . We were surprised that Adobe has not updated the plug in for this camera. Since we are your customers, we would like to know, when they will perform this update ? For us it is very important to work w

Hello , Recently my company purchased a Fujifilm X30 . We were surprised that Adobe has not updated the plug in for this camera. Since we are your customers, we would like to know, when they will perform this update ? For us it is very important to work with all our tools work quickly and efficiently, I guess I understand.
We await your response .
Thank you very much .

This is a user to user forum with "some" Adobe staff participation, make requests at this link
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

HT201263 While doing the restore the connect to Itunes image is still on my phone and has not shut off? The Itunes "status" area now says "Processing File" and has said this for 15 mintues with no change. What do I do??? This is the second Restore I've a

While doing the Restore the "connect to Itunes Image is still on my phone and has not shut off or changed since starting the REstore. Now Itunes status bar says "Processing File" but has not changed or done anything for 15+ minutes. What do I need to do? Let it go or is it not working???? FYI, I tried to update to the 6.0.1 (I believe thats this update)

This was the third Restore I've attempted today.... 'm not sure what all I did including unplugging and plugging it back in, and messing with tryign to select my phone vs. my husbands but it starting moving again. It's now attempting to "back up" from ICloud... we'll see. Thanks

HT201318 On 12/19/2014 I added 20 MG of ICloud storage using my credit card. The charge is still pending and my storage has not increased. I am planning on upgrading my phone and I need to update ICloud on my phone. Thank you

On 12/19/2014 I added 20 MG of ICloud storage using my credit card. The charge is still pending and my storage has not increased. I am planning on upgrading my phone and I need to update ICloud on my phone. Thank you

This is a user-to-user support forum. You may want to report the problem using the following link: https://www.apple.com/emea/support/itunes/contact.html

Is Ipad1 still secure considering the company has not kept the operating systems up to date for this model?

Similar Messages

Maybe you are looking for