Is is okay to run R12 rapidwiz with upgrade option when 11i instance is up?
Hello,
Is it okay to run R12 rapidwiz with option "Upgrade oracle applications" while 11i DB/Apps are up and functional which is to lay down the R12 applications code tree as part of R12 pre-upgrade steps?
Can you please clarify if running R12 Rapidwiz with upgrade option modifies anything at the database level and effects existing 11i system?
Regards,
AV
user10728177 wrote:
Thanks Hussein!! Can you also please tell if applying a patch in pre-install mode touches the database? If possible can you please explain me what exactly adpatch -preinstall does? I read oracle documentations about it but could not come to conclusion on it.
Regards,
AvPre-Install Mode
http://docs.oracle.com/cd/E18727_01/doc.121/e12148/T531058T531062.htm#d0e1491
Thanks,
Hussein
Similar Messages
-
ORA-39700: database must be opened with UPGRADE option
Dear buddies,
I just opened my database : startup upgrade and it started up.
But couldn't perform a backup.
Should I be running pupbld?
Could this problem be due to some opatch?
Here is a part of my alert log:
Thread 1 opened at log sequence 1050
Current log# 3 seq# 1050 mem# 0: D:\ORACLE\DATA\MIG\LOG_03.DBF
Successful open of redo thread 1
Wed Aug 11 13:35:15 2010
MTTR advisory is disabled because either FAST_START_IO_TARGET or LOG_CHECKPOINT_INTERVAL is set
Wed Aug 11 13:35:15 2010
SMON: enabling cache recovery
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\udump\mig_ora_1564.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Wed Aug 11 13:35:16 2010
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_pmon_3088.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_reco_1868.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_psp0_2624.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_mman_3312.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_dbw0_2304.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_lgwr_552.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_ckpt_2300.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:17 2010
Errors in file d:\oracle\admin\mig\bdump\mig_smon_2136.trc:
ORA-00704: bootstrap process failure
Instance terminated by USER, pid = 1564
ORA-1092 signalled during: ALTER DATABASE OPEN...
Please comment.
Thanks.
NithI just opened my database : startup upgrade and it started up.
But couldn't perform a backup.As you said you have started the DB in upgrade mode and trying to take the backup of database. I think you can't take the backup of DB in upgrade mode.Please shut it down first and start up it in normal mode and do the backup.
Which backup strategy you are following?
What you exactly want to do upgrade the database or trying to take a bcakup? -
In my MacBook Pro(10.7.5), finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see Top bar(Apple logo, Date and Wifi etc... bar). Even in safari address bar, TextEdit not accepting any text means when type something not showing up and also i am unable operate any thing from keyboard. Plz help me…..
One thing that you can try is installing a 'fresh' version of OS X Lion. Boot into your Recovery partition (holding down the command and R keys whilst booting) and elect to install OS X from the Recovery screen. You need not erase your hard drive and you should not lose any of your data.
Oh, and just as a precaution, I would use Disk Utility, once you're in Recovery mode, to verify your hard drive before trying to install the OS again.
Clinton -
PC running extremly slow with iTunes
Hello all,
Question is why my laptop would be running extremly slow with cover flow when it has more than enough horsepower to run almost any application (2.33 dual core, 512 graphics card, 2gig ram). iTunes runs just fine on my work laptop with cover flow, and its specs arent on par with my personal laptop. The only difference i can think of is that the work laptop (the good one) is running xp pro and the home is running vista 32bit. the other difference i can think of is that at home, all the music is stored via external HD while on the work laptop the files are stored locally on the laptops hard drive.
any advice would be greatly appreciated
Cheers!Vista has been reported to be a bit more buggy/laggy/unstable with iTunes. Music running of an external will also be noticeably slower and more jumpy than running off an internal. You answered your own question.
-
R12.1.3 Upgrade from 11.5.10 and having multiple Application Servers
Hi,
We are in the process of upgrading the 11.5.10 Instance to R12.1.3.
The 12.1.3 Instance will have multiple application servers.
I will be doing an R12.1.1 Installation with Upgrade Option.
What should be the procedure to have multiple application servers?
Finish the upgrade on one Application Node and then clone the other Application Tiers?
Please advise.
Regards,
VNWe are in the process of upgrading the 11.5.10 Instance to R12.1.3.
The 12.1.3 Instance will have multiple application servers.What services are running on each server?
Do you have shared APPL_TOP or shared application file system implemented?
I will be doing an R12.1.1 Installation with Upgrade Option.
What should be the procedure to have multiple application servers?
Finish the upgrade on one Application Node and then clone the other Application Tiers?
Please advise.Please see Chapter 3, Performing an Upgrade in the installation doc, there is an example.
Oracle E-Business Suite Installation Guide: Using Rapid Install
http://docs.oracle.com/cd/B53825_08/current/acrobat/121oaig.pdf
Thanks,
Hussein -
Problems with color matching when printing...
Hi, I work for a small family business in the P.O.P. industry. We currently have myself and one other designer, we both take illustrator files that have come from the graphic design firm that we contract with and get them ready to print on our Vutek QS3200. However ever since acquiring the printer we have begun to run into problems with the colors when printing. When the files are exported off of my computer, I use either .tif or .pdf files, they print as they should, the colors seem to match the proof and everything goes smoothly. However when the other designer exports a file, he tends to do mainly pdfs, the colors tend to be extremely different from where we want them. Also we will get very strange results, such as yesterday he kept getting a faint yellow 1/2" border around his prints. After I believe 3+ hours of him trying, I was given the original CD and instructed to try. After 15-20 minutes of making the changes that we needed to make (adding a new price point) and ripping, mine printed perfectly.
We both use Macs, both have CS3 Design standard, only differences between the computers are mine is newer and a bit faster, and I'm running OS 10.5.6 and he has 10.4. He has also at some point loaded various color profiles, whereas my CS package is just whatever the default is when I loaded it. When we were being trained he grabbed the color profile off of the Colorburst RIP server and loaded onto his computer, plus I believe he has a couple for freelancing purposes on there as well. My thought is that these profiles are somehow corrupting the files that are going through that computer, but I honestly am lost with it at the moment. He believes the problem lies within the fact that he does not have the newer OS, I honestly cannot see that as having any effect on this at all. I was wondering if anyone has run into any similar problems, or if anyone might have any advice on this issue? I would really like to be able to solve this, as I was hired to do mainly structural design for the P.O.P. and I'm having to put in a lot of overtime to get my work done along with the additional work that I'm having to do.
Thanks for your timeI've got a few years experience calibrating large format printers. First, the Yellow sounds like a file problem. I used to work with two workstations, one PC ( RIP station ), and one Mac ( file prep station ). I tend to agree with you in that the OS is probably not the problem. But, any Colorburst profiles should remain in the RIP, not in the originator application. My workflow consisted of creating EPS files that were based on established color settings in their given applications ( i.e., Illustrator, Photoshop ) which were interpreted by the RIP which had it's own calibrated profile ( perhaps more than one based on how many different substrates were being used ). Your partner may be complicating things by incorporating a RIP profile prematurely. If there are deviations big enough to be noticed, there has to be something in the application color settings that is causing some type of corruption. This could lead back to the operating system, but I would think it lies somewhere in Bridge or the application color settings. Start there. You should seriously consider implementing a calibration system if you do not have one already. Another slight possibility is the driver's ability to interpret files coming out of Leopard vs. files coming out of Tiger. It may benefit you both to be in the same operating system dynamics, using the same driver versions and RIP profiles. At the very least, match everything that is currently working successfully and put them on both machines. If there is still a noticeable problem in color matching, then something is seriously wrong and you should call in a prepress profiling expert. Hope this helps.
-
Problem 1 in my person form: hitting ora-1401 (view with check option).
In an earlier stage I had a table PERSON and a table ENSEMBLE.
At some stage I decided it was not handy I was storing performing musicians in two different tables.
So I set up a supertype, CONTRIBUTOR. PERSON is now a view on CONTRIBUTOR.
The attribute IS_NATURAL_PERSON makes the record listed in person.
The view definition is
CREATE OR REPLACE FORCE VIEW "PARTITUREN"."PERSON" ("ID", "FIRST_NAME",
"MIDDLE_INIT", "LAST_NAME", "GIVEN_NAME", "SORT_KEY", "DISPLAY_VALUE",
"GENDER", "DATE_OF_BIRTH", "DATE_OF_BIRTH_APPROX", "LOCATION_OF_BIRTH",
"DECEASED", "DATE_OF_DEATH", "DATE_OF_DEATH_APPROX", "LOCATION_OF_DEATH",
"NATIONALITY", "ANV_ID", "NUMBERING_SYSTEM", "OPUSNUMBERS", "PORTRAIT",
"MIME_TYPE", "FILE_NAME", "IS_NATURAL_PERSON", "LWTIMEST", "CREATED_BY",
"CREATED_TS", "UPDATED_BY", "UPDATED_TS")
AS
SELECT
id,
first_name,
middle_init,
last_name,
given_name,
sort_key,
display_value,
gender,
date_of_birth,
date_of_birth_approx,
location_of_birth,
deceased,
date_of_death,
date_of_death_approx,
location_of_death,
nationality,
anv_id,
numbering_system,
opusnumbers,
portrait,
mime_type,
file_name,
is_natural_person,
created_ts lwtimest,
created_by,
created_ts,
updated_by,
updated_ts
FROM
contributor
WHERE
is_natural_person='Y'
WITH CHECK OPTION;When I enter a record in Apex, I have the is_natural_person attribute default to Y.
However I always hit ora-1401.
It works in sql*developer and sql*plus.
I now always have to resort to non-Gui tools to enter someone. This is nasty.
Oracle 11.2.0.1, Apex 4.0.0.0.46
Sybrand Bakker
Senior Oracle DBAHello .
Some NLS charsets (such as UTF8) require more than one byte to store accented characters like "Ȩ", "ȿ", "�", "�", "ȵ", "ȭ" in the database.
For example, when a 10 character string is inserted into a varchar2(10) column, the above messages may be signaled if your string contains accentuated characters such as "Ȩ", "ȿ", "�", �", "ȵ", "ȭ". used in languages like German
One solution
If the UTF8 NLS charset is being used with French, German ... characters in an Oracle database, then the size of the target column length should be set accordingly.
Set the NLS_LANGUAGE and NLS_CHARACTERSET database parameters.
One approach is to change the Database settings as follows:
ALTER DATABASE CHARACTER SET WE8ISO8859P1;
SHUTDOWN IMMEDIATE
Onother
According to the Oracle documentation, column length semantics determine whether the length of a column is specified in bytes or in characters. You use BYTE to specify that the length is in bytes, and you use CHAR to specify that the length is in characters. CHAR length semantics is also known as codepoint length semantics.
Because some character sets require more than one byte for each character, a specification of 10 BYTE for a column might actually store less than 10 characters for certain character sets, but a 10 CHAR specification ensures that the column can store 10 characters, regardless of the character set.
You set the length semantics for an Oracle database using the NLS_LENGTH_SEMANTICS initialization parameter, and all VARCHAR2 and CHAR columns use the setting specified for this initialization parameter as the default. If this initialization parameter is not set, then the default setting is BYTE.
Edited by: Mortus on Jun 28, 2011 2:57 PM -
Playing dvds with vlc ... no right-click and 'open with vlc' option???
i searched discussions for this question but wasn't sucessful ... so here's my question:
i use a toshiba pc laptop and an iMac G5 ... in order to watch dvds (with different region codes) on my PC, I use VLC with great success ... I wanted to do the same on my iMac, but came across the following problem:
when I want to watch a DVD on the laptop, i simply right-click the title and go for 'open with VLC' (which gives me the menu and so on) ... when I try to do this on the iMac, however, there is no
'open with VLC' option when I right-click the DVD ... I can open single chapters of the DVD by opening the single .vob files, but I'm not happy with doing that ...
any ideas how to make watching DVDs with VLC on my iMac as easy as it is on my laptop?
thanx for your help!
2.1 GHz iMac G5 1.5 GB DDR2 SDRAM Mac OS X (10.4.6)found the solution by myself: open vlc, open the playlist and drag the dvd onto the playlist, then hit play ...
-
Watching dvds with vlc-no right-click 'open with vlc' option as on the pc?
i searched discussions for this question but wasn't sucessful ... so here's my question:
i use a toshiba pc laptop and an iMac G5 ... in order to watch dvds (with different region codes) on my PC, I use VLC with great success ... I wanted to do the same on my iMac, but came across the following problem:
when I want to watch a DVD on the laptop, i simply right-click the title and go for 'open with VLC' (which gives me the menu and so on) ... when I try to do this on the iMac, however, there is no
'open with VLC' option when I right-click the DVD ... I can open single chapters of the DVD by opening the single .vob files, but I'm not happy with doing that ...
any ideas how to make watching DVDs with VLC on my iMac as easy as it is on my laptop?
thanx for your help!
2.1 GHz iMac G5 1.5 GB DDR2 SDRAM Mac OS X (10.4.6)If you want all video DVDs to open in VLC, go to System Preferences>CDs & DVDs>When you insert a video DVD:>Open other application> and now select VLC.
This will open VLC, but the DVD will not automatically play, you have to go to File>Open Disc once in VLC.
One question though, why not use Apple's DVD player Application?
Daniel Gilmour
eMac 1.25 Ghz, iBook 14'' 1.42 Ghz Mac OS X (10.4.5) 512mb ram, Superdrive; 5G 30gb iPod, 4GB White iPod nano -
Hi Hussein,
I am using RHEL 5.3 for R12.1.1.1 Installation
This is Ajaz Ahmed. Thanks for your timely help. I was using this Document Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4)
for Linux (32-bit) [ID 402310.1] to Install R 12.1.1.1. as per your reply and the recommended document I
Note: 761564.1 - Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86).. I started to install. Prior to that I completed
all the pre-requisites. When running ./rapidwiz from the Stage12/startCD/Disk1/rapidwiz folder as a root user I get the following error.
Exception in thread "main" java.lang.UnsatisfiedLinkError: /mnt/hgfs/Stage12/startCD/Disk1/rapidwiz/jre/Linux/1.6.0/lib/i386/xawt/libmawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.load0(Unknown Source)
at java.lang.System.load(Unknown Source)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I am not able to proceed further. What can be the issue this time.
Best Regards
Ajaz Apps
Ajaz Ahmed
9967890118
Mumbai
e-mail : [email protected]
[email protected]Hi Hussein,
Earlier I was Installing with this Document Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4)
for Linux (32-bit) [ID 402310.1]. Error Rectified.
As per your suggestion I installed the R 12.1.1.1. using Red Het Entp. Linux 5.3 using the recommended document
Note: 761564.1 - Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86).
As per Note: 761564.1 document also I got the same error
The installation is completed after all the 5 steps. During the post install task
For the system checks there were errors in
RHEL 5.3 Errors
1) HTTP
checking URL = http://r12vis.apps12.com:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
2) Virtual Directory
RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
3) Login Page
checking URL = http://r12vis.apps12.com:8000/OA_HTML/AppsLogin
RW-50016: Error: - {0} was not created:
File = {1}
4) Help Page
checking URL = http://r12vis.apps12.com:8000/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
5) JSP
checking URL = http://r12vis.apps12.com:8000/OA_HTML/jtfTestCookie.jsp
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding
From the other terminal window I stopped and restarted all the appstier services.
There after during the retry option of installation for system checks only two errors
Remained which are
1) JSP
checking URL = http://r12vis.apps12.com:8000/OA_HTML/jtfTestCookie.jsp
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding
2) Login Page
checking URL = http://r12vis.apps12.com:8000/OA_HTML/AppsLogin
RW-50016: Error: - {0} was not created:
File = {1}
When I click next button I get the following message
RW-10001 – RapidWizard Install had detected that your configuration has errors
You must resolves these issues before continuing
As no other alternative left I press the cancel button.
After bouncing the linux service I started the DB Tier and Apps tier, but again I face the same problem of JSP and Login Page.
I logged on to application as applmgr and thru the path
/d01/oracle/VIS/apps/tech_st/10.1.2/opmn/bin
I run the ./opmnctl status command which gave me the error
Unable to connect to opmn.
Opmn may not be up.
So I started the services using
./opmnctl startall
opmnctl: starting opmn and all managed processes...
GETHOSTBYNAME(ap6004bld.us.oracle.com): 2
================================================================================
opmn id=r12vis.apps.com:6001
0 of 3 processes started.
ias-instance id=APPS_C_HOME.ap6004bld.us.oracle.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=7473)
failed to start a managed process after the maximum retry limit
Log:
/d01/oracle/VIS/apps/tech_st/10.1.2/opmn/logs/HTTP_Server~1
ias-component/process-type/process-set:
WebCache/WebCache/WebCache
Error
--> Process (pid=7472)
failed to start a managed process after the maximum retry limit
Log:
/d01/oracle/VIS/apps/tech_st/10.1.2/opmn/logs/WebCache~WebCache~1
ias-component/process-type/process-set:
WebCache/WebCacheAdmin/WebCacheAdmin
Error
--> Process (pid=7466)
failed to start a managed process after the maximum retry limit
Log:
/d01/oracle/VIS/apps/tech_st/10.1.2/opmn/logs/WebCache~WebCacheAdmin~1
After that I stopped the Apps tier. Logged in sys ‘as/sysdba’ and unlocked the apps account.
Started the Apps tier. But again I was not able to login.
After that I stopped the Apps tier, keeping the DB Tier ip. And run the Autoconfig from Apps Tier path /d01/oracle/VIS/inst/apps/VIS_r12vis/admin/scripts
sh adautocfg.sh
I get the error as AutoConfig completed with errors.
/d02/oas/oracle/OASDB/db/tech_st/10.2.0/appsutil/log/OASDB_testappsdb/06300116/adconfig.log
Enter the APPS user password:
The log file for this session is located at: /d01/oracle/VIS/inst/apps/VIS_r12vis/admin/log/06300418/adconfig.log
AutoConfig is configuring the Applications environment...
AutoConfig will consider the custom templates if present.
Using CONFIG_HOME location : /d01/oracle/VIS/inst/apps/VIS_r12vis
Classpath : /d01/oracle/VIS/apps/apps_st/comn/java/lib/appsborg2.zip:/d01/oracle/VIS/apps/apps_st/comn/java/classes
Using Context file : /d01/oracle/VIS/inst/apps/VIS_r12vis/appl/admin/VIS_r12vis.xml
Context Value Management will now update the Context file
Updating Context file...COMPLETED
Attempting upload of Context file and templates to database...COMPLETED
Configuring templates from all of the product tops...
Configuring AD_TOP........COMPLETED
Configuring FND_TOP.......COMPLETED
Configuring ICX_TOP.......COMPLETED
Configuring MSC_TOP.......COMPLETED
Configuring IEO_TOP.......COMPLETED
Configuring BIS_TOP.......COMPLETED
Configuring AMS_TOP.......COMPLETED
Configuring CCT_TOP.......COMPLETED
Configuring WSH_TOP.......COMPLETED
Configuring CLN_TOP.......COMPLETED
Configuring OKE_TOP.......COMPLETED
Configuring OKL_TOP.......COMPLETED
Configuring OKS_TOP.......COMPLETED
Configuring CSF_TOP.......COMPLETED
Configuring IGS_TOP.......COMPLETED
Configuring IBY_TOP.......COMPLETED
Configuring JTF_TOP.......COMPLETED
Configuring MWA_TOP.......COMPLETED
Configuring CN_TOP........COMPLETED
Configuring CSI_TOP.......COMPLETED
Configuring WIP_TOP.......COMPLETED
Configuring CSE_TOP.......COMPLETED
Configuring EAM_TOP.......COMPLETED
Configuring FTE_TOP.......COMPLETED
Configuring ONT_TOP.......COMPLETED
Configuring AR_TOP........COMPLETED
Configuring AHL_TOP.......COMPLETED
Configuring OZF_TOP.......COMPLETED
Configuring IES_TOP.......COMPLETED
Configuring CSD_TOP.......COMPLETED
Configuring IGC_TOP.......COMPLETED
AutoConfig completed with errors.
The E-Business Home Page is located at http://r12vis.apps.com:8000/OA_HTML/AppsLogin
If your browser doesn't automatically redirect to its new location, click here.
what can be the other possibility ? shall I try with Red Hat Entp. Linux 4 (32-Bit) ?
If you have some other documents please send me on my mail-id's.
Regards
Ajaz Ahmed
9967890118
Mumbai
e-mail : [email protected]
[email protected] -
R12 clone with RMAN auxiliary db.
Hi all,
We require daily clone for our setup due to testing and other reason. Can we replace only database via RMAN Clone?
R12 clone with RMAN Auxiliary DB. Find below steps, if I am wrong correct me.
1. run autoconfig on apps tier.
2. perl <AD_TOP>/bin/admkappsutil.pl and Synchronize appsutil on db tier.
3. Run autoconfig on dbtier or adconfig.sh <contextfile>) (which is correct? i am using autoconfig not with contextfile)
4. adpreclone.pl dbTier
5. adpreclone.pl appsTier
6. copy source to target including db and apps tiers.
7. perl adcfgclone.pl dbTechStack .
8. create duplicate db (auxiliary db) from rman backup.
9. sqlplus "/ as sysdba" @adupdlib.sql so
10. perl adcfgclone.pl dbconfig <CONTEXT_NAME.xml> (This gives error, I am skipping this step. I have tried with perl adcfgclone.pl database but then also its give error. )
11. exec FND_CONC_CLONE.SETUP_CLEAN;
12. perl adcfgclone.pl dbTier (if we run perl adcfgclone.pl dbTechStack ,Is this step require?)
13. perl adcfgclone.pl appsTier
please correct my steps.
thanks in advance,
sandeepHi,
3. Run autoconfig on dbtier or adconfig.sh <contextfile>) (which is correct? i am using autoconfig not with contextfile)Run $ORACLE_HOME/appsutil/bin/adconfig.sh contextfile=$CONTEXT_FILE appspass=apps -- See (Note: 603104.1 - Troubleshooting RapidClone issues with Oracle Applications R12) for details.
10. perl adcfgclone.pl dbconfig <CONTEXT_NAME.xml> (This gives error, I am skipping this step. I have tried with perl adcfgclone.pl database but then also its give error. )What is the error?
12. perl adcfgclone.pl dbTier (if we run perl adcfgclone.pl dbTechStack ,Is this step require?)After running "perl adcfgclone.pl dbTechStack", you need to run "perl adcfgclone.pl dbconfig <Database target context file> -- See (Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone) and (Note: 799735.1 - Rapid Clone Documentation Resources, Release 11i and 12) for details.
Regards,
Hussein -
Weird... Running Win7 32bit with Office 2007- Acrobat 8.2.6
Running Win7 32bit with Office 2007- Acrobat 8.2.6
What im trying to do: Convert a word document into a PDF.
My Problem: When selecting PRINT-> Adobe PDF--> Okay....
it produces the following error
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
%%[Page: 3]%%
%%[Page: 4]%%
%%[Page: 5]%%
%%[Page: 6]%%
%%[Page: 7]%%
%%[Page: 8]%%
%%[Page: 9]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
Thoughts/observations
1.) acrobat/distiller is using default settings. Nothing has been changed after initial install.
2.)The user that is experiencing this problem has the following setup: Win7 32bit with Office 2007- Acrobat 8.2.6
3.) I can PDF internet pages, but not certain word documents.
4.)Another user running XP with office 2007 is able to print to PDF. weirdSeems like when I uncheck "Rely on system fonts only; do no use document fonts"
it prints to PDF, but the original fonts are lost [some formatting is lost too, sometimes.] -
R12.1.1 Upgrade: Question on Laying tech stack using rapidwiz
Hi
I am preparing for the R12.1.1 upgrade from 11.5.10.2 and we are already on 11.1.0.7(for db).
I have given the environment to functional teams to do pre-steps on the 11.5.10 code tree as per the upgrade document.
In the meantime, I was hoping I can save time, if I can layout the tech stack using rapidwiz.
is there a problem in doing this ?
When users are using the 11.5.10.2 code tree, can I install the 12.1.1 code tree on a different loccation?
My objective is if i can set it up this way, then when it comes time for upgrade, then I need to just run the upgrade driver.
thank you
MSK>
When users are using the 11.5.10.2 code tree, can I install the 12.1.1 code tree on a different loccation?If you want to be kind to your users, kick off the installation during a quiet time on the server. :-) You don't need to shut down the 11i services, since all you're doing is copying files. The I/O and CPU involved in unzipping the 20-ish GB of apps tier software will probably be felt by your users, however.
Regards,
John P.
http://only4left.jpiwowar.com. -
Hi
In the document Installation Guide: Using Rapid Install Release 12.1 (12.1.1) *(Part No. E12842-03)*
As part of the upgrade steps
1. The screenshot in page 3-8 shows that you need to provide a portlist
and
2. the screenshot in page 3-9 shows that you need to provide the ORACLE_SID and Oracle_HOME
3. The screenshot in page 3-10 shows that you need to provide the apps password of the existing database (ie the database which is not in R12 and needs to be upgraded to R12)
Can you please clarify how this works
if the portlist in point 1 and oracle_SID in point 2 is to be the existing instance
(else the inputs in screenshot in point 3 will not connect to the existing database right?)
How do we install the 11g RDBMS Oracle_home as part of the regular steps in rapidwiz (mentioned in chapter 3 of Installation Guide) without having to do rapidwiz -techstack
Also in case we want to do split-tier installation
(ie post-upgrade topology has db_tier is a separate server without applications node)
what are the steps?
Are they something on the below lines?
1. On db server
rapidwiz -techstack (Dbtier) on R12 software for platform_1
2. On application node
dummy run of rapidwiz (upgrade filesystem) on R12 software for platform_2
(remove the R12 home on application node using adgentns -removeserver)
Thanks
CyrilHi,
if the portlist in point 1 and oracle_SID in point 2 is to be the existing instance
(else the inputs in screenshot in point 3 will not connect to the existing database right?)These screen shots are for running RapidWiz as part of the upgrade (not a fresh installation), so you have to enter the value of the port pool, and ORACLE_SID of the existing 11i instance.
How do we install the 11g RDBMS Oracle_home as part of the regular steps in rapidwiz (mentioned in chapter 3 of Installation Guide) without having to do rapidwiz -techstackIf you want to install 11gR1 RDBMS or Application technology stack, then you will have to use "rapidwiz -techstack" option. Again, this is used as part of the upgrade and not for a fresh Oracle Apps R12 installation.
Also in case we want to do split-tier installation
(ie post-upgrade topology has db_tier is a separate server without applications node)
what are the steps?
Are they something on the below lines?
1. On db server
rapidwiz -techstack (Dbtier) on R12 software for platform_1Correct.
2. On application node
dummy run of rapidwiz (upgrade filesystem) on R12 software for platform_2
(remove the R12 home on application node using adgentns -removeserver)Why to remove the R12 home on the application tier? Are you referring to the database ORACLE_HOME in case you already have it running on this node? Please elaborate more.
Regards,
Hussein -
Internet Explorer keeps asking if it is okay to run Adobe Flash Player.
I am having a problem with Adobe Flash Player working with Internet Explorer 11. Whenever I visit a site that has content that needs Flash Player to load, Internet Explorer prompts me asking me if it is okay. When I see allow, all that happens is the website refreshes and instead of displaying the content, I am asked again. This happens over and over. What can I do about it?
My setting is medium-high. Here's a more detailed description of my problem:
I am having a problem with Adobe Flash Player with Internet Explorer 11. The problem is that whenever I visit a website that has content that needs the flash player in order to work, Internet Explorer asks me if it is okay to run the content. When I click "Allow", the page refreshes and I am asked again. I do not understand why it behaves this way because I have all Adobe plugins for Internet Explorer activated.
To see the problem that I am having in action, watch this video.
Maybe you are looking for
-
My partner and I each have an iTouch and one iMac. iTunes only recognizes my iTouch. How can we use one iTunes with two iTouches. thanks
-
I need a few networking APIs! any help appreciated
Hi people! I need a few APIs for a networking project, namely an API that does some kind of port scanning similar to the one found in NMAP, and another one that does packet sniffing, similar to that found in CPAC. Anyone knows where can I find any li
-
Request message in Multi Approval
I am using multi approval. When request goes by default request goes Approve User XXX I need to change this message. Can some one please guide me what should I do? Thx
-
Some dock icons appearing with question marks
I backed up my hard drive, erased it, transferred backup to hard disk, and have had a few problems since. Today, the fourth time I turned on the computer since doing all this, startup produced ? for 6 dock icons: firefox, microsoft word and excel, ap
-
My question to frank on his JAAS implementation?
Hi Frank, Your document for implementing JAAS in J2EE applications on OC4J is superb and simple. I have a simple query. Is it possible to have a single screen built in the application which will list out the current logged in users from JAAS model. I