Is is possible to change the hourly interval in the weekly calendar in 4.1?

Hi - using APEX 4.1 and having implemented a SQL calendar. All is working fine, but I would like to change the display of the weekly calendar to show 30 minute intervals, instead of 1 hour intervals. I've look in the template, but don't see any way to change it. Is it possible to change this? Thanks.

Hi Collin,
Could you le me know the resolution
Regards
Alan

Similar Messages

  • Does anyone know if it is possible to change the display in week view to show 24 hours per day for those of us that work irregular hours

    Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
    Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
    The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

    Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
    Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
    The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

  • Is it possible to Change the pooling interval time in XI3.0 or XI3.1

    Hi,
    For every 15 sec the CMS will check the scheduled jobs status and act accordingly ,by default the value will be 15 sec now We want to change the pooling interval time to 1 min.
    -- Where do i have to change the pooling interval time.
    -- Is it possible to change the value or not.
    Please help..
    Thanks.

    Hi Collin,
    Could you le me know the resolution
    Regards
    Alan

  • Is it possible to change the way the time shows?

    Is it possible to change the way the time shows from 10.00 to 10:00? Why does it show with a . anyways?
    iOS 8.1.2 - iPhone 6
    Espen (Norway)

    The manual showed you the area to make changes in. As I stated earlier, it has to do with Regional formats. Just like some regions use the period between dates as well. The same is true for dates. In the US, we normally would show today's date as January 10, 2015. In many European countries, it would be 10 January 2015. The same is true for time. We generally use 12-hour format, many places use 24-hour format. How it is displayed on the phone is based on the generally accepted method for the region. If on the phone you go to Settings>General>Language & Region, you can see your regional format settings. If you go under Region Formats, tap on Advanced. That gives you the option to make some other changes if you like, rather than using the regional standards.

  • Is it possible to change the number of weeks to be displayed in the month view in calendar (mavericks)?

    I'd like to know if it's possible to change the number of weeks to be displayed in the month view in calendar? Thanks!

    No.
    There are up to six calendar weeks that might be used to display the 31 possible days in a month.
    So the month view displays six weeks.

  • Is it possible to change the ALV report layout settings in spool request

    Hi All,
    Please let me know is it possible to change the ALV layout settings in background as we can change the layout settings in foreground to get correct format when download to excel.
    Regards,
    Jyothi CH.

    Hello,
    Add a parameter for layout on selection-screen (p_varmm LIKE disvariant-variant).
    As you are in backgroud mode, ALV will be printed with this layout (assuming you call correctly the MF ALV_LIST or REUSE_ALV_GRID)
    Regards,
    Christophe

  • Recently, I discovered I have two iCloud accounts. Is it possible to change the Apple ID from one account to match the second account, without losing the information on each account?

    Recently, I discovered I have two iCloud accounts. Is it possible to change the Apple ID for one of the accounts to match the other account, without losing the information from either account.
    thanks

    Welcome to the Apple Community.
    It's a little tricky to move data from one iCloud account to another but it can be done. But what makes you think you have 2 iCloud accounts.

  • Is it possible to change the video card of a pavilion g7-1075dx?

    So, I have an HP Pavilion g7-1075dx Notebook with Windows 7. I'm an avid gamer and wish to play the newest games. However, there's one problem thats keeping me from doing so. Alot of the newer games require newer video/graphics cards. This particular laptop has an ATI Mobility Radeon HD 4250. The newest games seem to require ATI Radeon HD 4850 and above. This is the only thing thats keeping me from playing games like Starcraft II on the highest settings OR in the case of Star Wars: The Old Republic, it almost keeps me from playing the game, period, due to the graphics being too much for my current card to handle, causing massive lag. I was hoping I could change the video card. Upgrade. However, i've heard that with most laptops or notebooks you can't upgrade anything other than the RAM. I'm hoping anyone on here can help me out and tell me if it is possible to get a new video card for my laptop. We don't have a desktop computer so this laptop is my only hope for a long time to play newer PC games.

    Alright, let me put this in a simpler message: Does anyone know if it is possible to change the video card currently in my laptop, the HP Pavilion g7-1075dx, for a newer and better one. ATI Mobility Radeon HD 4250 to ATI Radeon HD 4850 or higher.

  • Is it possible to change the colour of box in script from black to blue

    Hi,
    Is it possible to change the colour of box in script from black to blue  or some other colour and background colour also...if so how....
    Thanks.

    No..
    It is not possible in scripts..
    In scripts u cannot use colors..
    In smartforms u can do that..
    reward if it helps u..
    sai ramesh

  • I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD? If yes, where I find a tutorial about this? Thanks a lot and best regards all.

    Hi people,
    I'm typing from Brasil, sorry my English.
    I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
    I intend to keep the original DVD driver and install the SSD in the same HD place.
    If yes, where I find a tutorial about this?
    And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
    http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
    What brand and model of SSD do you recommend?
    Thanks a lot for now and best regards all.
    Carlos Sgrillo
    Porto Alegre, RS, Brasil

    Tukaine
    Sep 23, 2012 10:59 PM
    Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
    This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
    Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
    When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
    If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
    Fixes people have used in the past included:
    Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
    Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
    Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
    Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
    HDD Fan Control
    HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
    It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
    Instead of HDDFan Control, get the free SSDFan Control
    http://exirion.net/ssdfanctrl/

  • Is it possible to change the order of the fields in the int table?

    Hello
    Is it possible to change the order of the fields in the int table?
    Lets say itab has the following fields :
    F1, F2, F3
    I would like to see it as F2 F3 F1
    Thanks

    >
    Comandante Che Guevara wrote:
    > Lets say itab has the following fields : F1, F2, F3
    >
    > I would like to see it as F2 F3 F1
    What do you mean by "like to see" ? You can WRITE the fields in any order you want. If you want to display the internal table in an ALV you can manipulate the fieldcatalog.
    If you want something else other than display the field, you have to explain your req. in detail.
    BR,
    Suhas

  • Is it possible to change the color of the folders in OS 10.10.2 Yosemite?

    Is it possible to change the color of the folders in OS 10.10.2 Yosemite?

    You can try these after backing up.
    Folders – Color folders
    Folders – Color folders Mavericks
    Folders Factory – Color folders

  • Is it possible to change the color of the regions in GB 11?

    Is it possible to change the color of the regions in GB 11?

    Gourmet Pizza wrote:
    Is it possible to change the color of the regions in GB 11?
    only an imported orange region (to purple):
    http://www.bulletsandbones.com/GB/GBFAQ.html#orangetopurple
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Is it possible to change the color of imported art in pages, say from B&W to a color?  ... or even to make it a gradation of color?

    Is it possible to change the color of imported art in pages, say from B&W to a color?  ... or even to make it a gradation of color?

    Make a Shape > Inspector > Graphic > Tinted Image Fill > Scale to fit > browse to image > click on the color patch to change the color to what you want
    or
    Drag in an image > overlay it with a Shape > select the color for the shape and change its Opacity
    Shapes may have Gradient and Advanced Gradient (multiple colors) fills both linear and radial. Both are in the Graphic Inspector as is Opacity.
    Peter

  • Is it possible to change the chart of accounts in Oracle Financials?

    Dear Colleagues,
    Is it possible to change the chart of accounts in Oracle Financials?
    Thank you in advance.
    Andrey

    It is not an easy change. Oracle typically recommends against it but sometimes company structure or processes change so much that you are forced to do it.
    Take a look at http://www.vantagesolutions.com/media/SCOUG_May_2004.pdf as well as http://www.erpstuff.com/forums/topic.asp?TOPIC_ID=6381.
    If you google "change oracle chart of accounts", you will find some more hits as well. This is a big project.
    If you other business reasons to do a reimplementation, then changing COA as part of that will be very easy.
    For a lot of companies debating between reimplementation and upgrade, a need to change COA becomes the last straw in favor of reimplementation.
    Hope this helps,
    Sandeep Gandhi

Maybe you are looking for

  • How can I use a generic indifferently in one of the generic's member functions?

    I'm curious about the following situation: I'd like to access another generic's private member in a constructor. How can I do that irrespective of the generic's actual type? Here's a sample of what I'm trying to accomplish: public class C<T> private

  • How do I get this stupid U2 album off of my IPhone?

    This has got to be the most idiotic marketing stunt ever.  Shame on Apple for burning $100MM of shareholder money to do it. I have spent the last half hour trying to get this stupid U2 album off of my IPhone.  I tried doing it from my laptop and hid

  • Terms of payment: 85 days. 10 & 25

    Dear all, I need to create a new terms of payment for Spain: "85 days. 10 & 25". No problem to create it, but with days 6 and/or 7 of each month it doesn't work propertly. Depending on the days of each month. I created it in the following way: Day li

  • How to render with alpha channel?

    Hello, I am trying to render a comp with alpha  channel QT PNG. When i play the clip it's with black BG but if i  imported in AE is with alpha channel. How to render in such way that i  can play in Quicktime without the black BG? Am i missing somethi

  • Billing block at the customer level.

    I have defined a billing block and have assigned that block to a customer for a particular sales area. After that I created an order for that customer. I was assuming that the Billing Block field on the sales order will be populated with the block I