Is is possible to change the page of an embedded document?

I've got a PDF that I've embedded into an InDesign document, currently displaying Page 2 of the PDF. Is there an easy way to switch that to Page 3 of the PDF without reinserting it all over again?

How about adding the three new pages at the end, then moving them to the front (or just adding three new pages to the front)? Is there something else on those pages that needs to remain on that page number?
You might also want to think about re-importing the whole PDF int a new file. You can do that in a matter of minutes using the script here: InDesignSecrets » Blog Archive » Zanelli Releases MultiPageImporter for Importing both PDF and INDD Files

Similar Messages

  • Is it possible to change the page of a linked PDF without relinking?

    Is it possible to change the page of a linked PDF without relinking and going through the import options?
    I'm trying to import seveeral pages of the same PDF. The process would be quickest if I could import it once, then duplicate the image box a number of times, then just change the page number each image box is linking to.
    At the moment I'm having to relink (or place), then go through Import Options, then choose the page - it's a long process that feels like it should be quicker.
    Any ideas?
    Thanks

    The short answer is no, that's not possible, but it IS possible to import multiple pages at one time.
    My favorite script for this is from Scott Zanelli: InDesignSecrets » Blog Archive » Zanelli Releases MultiPageImporter for Importing both PDF and INDD Files, but there's also a sample script included with ID.

  • How is it possible to change the page of 1 tab to Page 2 then to page 3 etc using a boolen control?

    Hi sir,
             I created A tab control of 4 pages.How is it possible to change the page of 1 tab to Page 2 then to page 3 etc using a boolen control?
    Please Mark the solution as accepted if your problem is solved and donate kudoes
    Solved!
    Go to Solution.

    You have a couple of possiblities:
    Keep the tab value in a shift register and use a value changed on the boolean to increment or decrement the tab. Write to a local variable of the tab as needed (I would recommend against value property nodes as in the above examples by others).
    You could also hide the tabs and make the tab control an indicator. Now you can write directly to the terminal if the boolean changes and you don't even need a local variable.
    Here is an example showing both (LabVIEW 8.2).
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    TabSwitcher.vi ‏18 KB

  • Is it possible to change the fonts in an illustrator document in Indesign or any other program BESIDES illustrator?

    Is there a quick way to change/replace the font of an illustrator document in inDesign or any other app? Thanks

    Depends on what is in the AI file.
    CD does a normally good job unless there are meshes and a particular type of transparency (I forget which one). I usually don't get "fancy" AI files. Stock & Trade, bare-bones types of files. these open in a few of the applications I use daily. That said, I never do it unless I need to return a format other than AI--because, well, why? I always try to use the originating application with the exception of older EPS files. As a lot of the daily stuff I do is screen printing, and because most every screen printer I deal with use CD, at some point the art has to go into CD.
    Mike

  • Is it possible to change the baseentry/baseline/basetype in document lines?

    Hi,
    I have created a PO and a SO with same item in document lines separately. I want to set the BaseEntry, BaseLine and BaseType of PO lines to points to a item line in SO. My code is like below:
                    po.Lines.SetCurrentLine(0);
                    po.Lines.BaseEntry = xxxxx;
                    po.Lines.BaseLine = 0;
                    po.Lines.BaseType = 17; // Sales Order
    When I called po.Update(), i got error code -5002 with error message : Item no. is missing  [POR1.ItemCode][line: 1]. I am sure when i called po.Lines.SetCurrentLine(0), it points to correct line. My question is Can I update the BaseEntry/BaseLine/Base in a existing document line item?
    BTW, since the PO is created separately the BaseEntry and BaseLine are all empty or -1. Now, I am using DI 2007A.
    Please suggest!
    Thanks,
    Lan
    Edited by: ZHANGLAN on Apr 15, 2011 10:03 PM

    Hi Gordon,
    I tried it again to create a new PO with all base document info in the line item, but this time I got error message: "Base document card and target document card do not match." with code -5002. The SO and the new PO have same line item and same qty. But I don't know what does that error message mean? Is it about business partner code? But they are different, in SO it is customer and in PO it is vendor. What's possible reasone for this error message?
    Thanks!
    Lan

  • Is it possible to change the color of imported art in pages, say from B&W to a color?  ... or even to make it a gradation of color?

    Is it possible to change the color of imported art in pages, say from B&W to a color?  ... or even to make it a gradation of color?

    Make a Shape > Inspector > Graphic > Tinted Image Fill > Scale to fit > browse to image > click on the color patch to change the color to what you want
    or
    Drag in an image > overlay it with a Shape > select the color for the shape and change its Opacity
    Shapes may have Gradient and Advanced Gradient (multiple colors) fills both linear and radial. Both are in the Graphic Inspector as is Opacity.
    Peter

  • Is it possible to change the colour of the Pages' skin, since it is grey, is there any way to change it and make it less tedious?

    Is it possible to change the colour of the Pages' skin, since it is grey, is there any way to change it and make it less tedious?

    fruhulda wrote:
    If you see any grey"background" if is on the left and that is the comment field.
    Hi fruhulda
    It's not the comment field which is a restrictive description.
    In fact it's the window's background.
    Yvan KOENIG (VALLAURIS, France) lundi 26 septembre 2011 12:08:45
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • Is it possible to change the spell check dictionary in "pages for iPad" from Spanish to UK English?  The app was downloaded in Spain.

    Is it possible to change the spell check dictionary in “pages for iPad” from Spanish to UK English?  The app was purchased in Spain and I am living in spain temporarily

    Spell checking should be based on the keyboard layout that you've got selected in Settings > General > Keyboard > International Keyboards - if you have an English 'UK keyboard' selected then the spell checking should be English

  • Is it possible to change the color of the regions in GB 11?

    Is it possible to change the color of the regions in GB 11?

    Gourmet Pizza wrote:
    Is it possible to change the color of the regions in GB 11?
    only an imported orange region (to purple):
    http://www.bulletsandbones.com/GB/GBFAQ.html#orangetopurple
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Is it possible to change the URL of an application?

    Hi All,
              I was working with the oracle apex and created few applications almost a year back, due to my higher studies there is a gap with the tool..and finally I am in.
    Am planning to create an application which will be similar like a personal website.My doubt here is ..whether it's possible to change the URL by keeping a simple one which includes my name also
    instead of having this big..
    http://apex.oracle.com/pls/apex/f?p=10221:1:116416608594529
    I can understand that the whole URL describes the appln no,page no and session ID but its my doubt possible or not..If possible then how to proceed?
    Thanks
    with Regards,
    Ramya.

    My doubt here is ..whether it's possible to change the URL by keeping a simple one which includes my name also
    instead of having this big..
    http://apex.oracle.com/pls/apex/f?p=10221:1:116416608594529
    I can understand that the whole URL describes the appln no,page no and session ID but its my doubt possible or not..If possible then how to proceed?
    If you are just looking for a nice and short URL to start your application, why not just use a URL shortener service like goo.gl ?
    Just put in your long URL and it will create a nice and short URL for you... for example, the above URL is now http://goo.gl/FijYxn
    - Morten
    http://ora-00001.blogspot.com

  • Is it possible to change the formating of a template.

    I am new to iweb & working on a heavy web site. I use Template "modern" & Blog page for the entries.
    1. Is it possible to change the Heading colour & size to a different one in the template, without changing it in each & every Blog entry.
    2. I want to remove the "Read More" text from the main Blog page & want to link a PDF file in that location. Is it possible.
    Please help
    Thank you

    I could not find any way to do that. There is no way access the song information like you do through iTunes.

  • Is it possible to change the URL of the browser corresponding to changes in the timeline?

    Hello,
    I'm trying to create a whole website in Edge. Is it possible to change the browser URL for different sections of the animation. For example me.com/part1 leads to 2.0 seconds in the animation. And for example when you type me.com/part2 the browser would go to 4th second of the animation. And vice versa, when the animation reaches the 4th second the browser URL would change to me.com/part2. It would be really great if that were possible. Any ideas on how to accomplish it?
    Thanks!

    Hi there, Joel's example seems to be exactly what you're trying to do. All you need to do is replace his functions with your functions.
    There are two main parts to his example: 1) reacting to a URL change directly in the URL bar, 2) reacting to a button click, and setting the URL
    Regarding Item 1: this line (this adds a listener for when the URL hash is changed, and calls the 'sym.animate' function in his example). Note that he is linking the value after the # with the symbol names 'panel1', etc. This line enables the functionality for you to be able to directly change the URL to: testStep95.html#panel2, and the site will change pages.
    $(window).on("hashchange", function(){sym.animate(location.hash.replace("#",""), sym.onStage)});
    Regarding Item 2: he's setting the page title (based on the active panel symbol) and URL hash, in the  'sym.animate' function. He calls the 'sym.animate' function on click of btn1, btn2, btn3:
    document.title = panelIn;
    window.location.hash = panelIn;
    Props to Joel for his slick example!

  • Is it possible to change the position of beining of text in a standard report

    Hi,
         I am wondering wether it is possible to change the position of the test (the starting point) in a standard report. I would like to print a label with different texts at different positions. If its not possible in a standard report is there any other way to do it.
    Thank you,
    Mudda.

    Hi Mudda, I don't see any way myself to set any particular starting position for your text. It looks like the best way to emulate this behavior would be to add a new line with lots of tab characters or spaces to place your new text at a specific offset from the left. You can also use Append Table to Report and wire in a 2D string array with only a few positions filled in with your various text labels as shown below. This will space text labels pretty well across the page. Try it out and see if it works for you. You could be more clever and build the 2D array programmatically if you wanted more control over position.
    Message Edited by Jarrod S. on 06-02-2006 05:37 PM
    Jarrod S.
    National Instruments
    Attachments:
    Set_Report_Position.JPG ‏69 KB

  • Is it possible to change the default URL when creating new hyperlinks?

    I'm currently working to take a 128 page catalog that was created in InDesign for print and turn it into a interactive PDF to post on our companies website. The catalog contains thousands of part numbers and I'd like to link each one to its corresponding stock status page on our website that gives current availability and pricing for any particular customer.
    So say I'm dealing with part number "XXXX". When I go to add the hyperlink the default web address it spits out is " http://XXXX ". Instead of that, would it be possible to change the default to " http://forums.adobe.com/discussion/XXXX/1 ". Obviously I just used this website as an example, but it would save so much time if I could avoid having to type the exact same URL every time.
    Or maybe is there a quicker way to do this other than what I am currently trying?
    Thanks

    I've found some external software applications that will do it, so that leads me to believe its not possible within ID CC.

  • Possible to change the room laout (Navigation)

    I just succesfully created a coll. room in which it is possible for peple to discuss and upload docs. Now is it possible to change:
    - The navigation: Edit names and place em in the second level navigation
    - Is it possible to customize the documents part to my needs, like add more folders, put in some opening text and color. This is all pretty standard and i want to use this to develop a customized one. So:Can i import this in NWDS or sommit?!
    Additionaly: when you would make a page for your customers that should be exactly like they wish, but has great similarity to existing collaboration tools. Would you then:
    - Use the existing collaboration and customize.
    - Create an own application
    Is it possible to download these kind of applications from others?
    Message was edited by:
            Hans Wassink

    Hi Hans,
              Yes. It is possible. You can change layout of room.
    Create custom layout for your need. And assign this layout to particular room.
    Follow the given steps to change layout of the room.
    System Adminstration -> KM Content
    You can see list of folders in content area.
    room extensions - > cm stores -> documents -> workspaces.
    There you can see one or more folders named as 'documents'. Find your folder and change the layout of that folder. It will help to you.
    Thanks and Regards,
    Venkat

Maybe you are looking for