Is is possible to delete an Asset physiscally when its value is zero?

Hi All,
Is it possible to delete an Asset physically after is been used and its value is made zero or some other way?
Regards,
Sudheer K

Hi,
If it is in a test environment you can try OABL.
However, in production system, you can't/supposed to do that. You can delete with AS06 provided no transaction has beep posted to an asset.
Best Regards,
Madhu

Similar Messages

How CAn we Delete CApitalized Assets.

HI All,
How can we delete assets after once capitalized...i was trying to delete the asset in AS06 its giving message "deleting not possible.the asset already has values".
Regards,
Vasanth.P

Hi,
You can scrap a asset.
Using AS06 -- Block -you can stop further acquisitions, Delete - No postings will be made to this asset.
Use T.code ABAVN for scrapping
Regards,
Murali
Assign points if useful.

Deleting an asset without deleting the representation.

Hi,
does anybody know if it's possible to delete the asset with the proxy media, thumbnail and posterframe but not the primary representation?
regards

I'm not aware of a way to do this. Why do you need to do it?
Is it because you need to reimport that asset because the content has changed? In that case, simply CTRL-click on the asset and select "Analyze". This will effectively re-import the asset, and recreate the proxies.
Or is it because its a particular file that you dont want to appear in FCS, but needs to remain on the drive? In that case, it's a bit trickier. If there is a pattern to the files you dont want imported, then you could apply that as a filter within the scan response (for example, I've added "inprogress." to the reject filter of one of my scan responses to prevent any files that are still in the process of being downloaded from being imported). Another example is to restrict a scan to only importing *.mov files, to prevent any audio, documents, images, etc from being caught in the net.
If it's the second case, then I agree with you: there should be a way to delete the asset from the database, but not from the filesystem. The only problem with that however is that without the filtering I mentioned, the asset would likely reappear after the next scan was triggered!
Hope that helps.
Oli.

AS91/AS92 - Delete Duplicate Assets

Dear friends off a difficult times
In PRD, during a load of assets to a new area, the user generated duplicate records for fixed assets (load by LSMW).
I found many forums on this subject, but have not found a complete solution to my problem.
Sets:
For acceptance values (SPRO):
SM30: 31/09/2011
OAYC: 09/2011
For the load was done the following:
1) create old asset by AS91;
2) Date of Incorporation: 31/09/2009 (must be this date)
3) In "Values in Acceptance", I insert the acquisition value, accumulate depreciation and value of the amount of depreciation in the year launched.
For deleting the assets created in duplicate was performed the following:
1) I tried to delete the values of acceptance, but only got the purchase price and Accumulated Depreciation (last year) by AS92;
2) I changed the key of depreciation for 0000 (not depreciate) by AS02. The beginning of the depreciation is 01/10/2011;
3) Paralysis also asset by the AS02;
4) I low the asset by ABAVN dated 01/10/2011;
5) I blocked the immobilized by AS05.
OBS.: I could not remove the asset by AS06.
The problem is: When I run the depreciation is calculated values for this asset, which should not happen because we want to eliminate the asset.
How to remove / delete / block assets so that its effect is null in accounting?
Thank you very much.
GLippmann

Hi:
In order to delete the assets you need to sett a deactivation date on the asset (ANLA-DEAKT) and then use AS06 to delete it.
If there are any postings made to assets then you would not be able to do that. Incorporation date i do not think has anything to do with depreciation ..Depreciation is affected by the asset capitalization date as per period control settings.
Regards

How to delete an asset with a capitalization date inefaceable and no value?

Hi all,
An asset was created on the wrong asset class. I would like to erase it but this is impossible because of the capitalization date.
Indeed, I cannot change the fields status variant of the capitalization date, it is compulsory.
Furthermore, as this asset was an error, there are no values on it.
I tried to enter a deactivation date, but this is not possible because of no acquisition performed.
Therefore, I would like to know if it is possible to erase an asset even if a capitalization date has been entered in the master data?
If it is possible, how can I do?
Thanks for help

Hi,
This is the drawback in asset master, when you make cap date as mandatory for AS01 transaction.
As a standard practice, cap date gets updated automatically when posting MIGO / F-90 only along with the qty.
In your case, first ask your ABAP member to delete the values from cap date field from table ANLA. (Field Name: AKTIV) for your questioned asset.
Then you can delete that asset with AS06 by choosing Physically delete the asset.
This will resolve your issue.
But if you make your field status as optional to cap date, then you must not got these kind of issues in the future.
Regards,
Srinu

Deletion of asset class

Hi
Can anyone advise how do I make use of program RACLSDEL for deletion of asset class?
One of the Requirements:
You must first mark the asset classes for deletion.
How do i mark the asset class for deletion? In transaction OAOA i can only block the asset class and not delete.
Kindly advise.
Thanks.

Hi Sui,
In addition to what has been said, make sure there is no <b>Asset Master</b> within the system using the Asset Class you intend to delete. Otherwise, deletion would not be possible.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

Option of Mass Delete of Assets

Hi,
My client uploaded some assets twice by mistake. He wants to delete them
Is there any way to do a mass delete if Assets do not have any value.
I tried the option of Worklist but it seems it does not have the delete option...
Kindly help..........
Best Regards,
Venkatram

Hi,
Through ABAP it is possible.
you can use this FM to delete the fixed asset.
ASSET_MASTERRECORD_MAINTENANCE
while calling the FM you need to send the parameter
i_trtyp = 'L'. "deletion flag
along with other parameters.
Hope it helps.

Is it possible to delete files from time machine?

Is it possible to delete files from time machine? I had a drive crash, restored the files to a new drive, and now the old versions and the new versions of the files are both backed up, taking up a mountain of drive space. Do I just have to wait 'til the drive gets full and then tell it what to delete first?

Hi, I need help in a related problem. I have 500gb time capsule. I needed larger hard drive, so I now use TM to back up to a different 1tb hard drive. So I don't need the TC as a TM back up device. But I want to use the TC's hard drive as an extra external hard drive. I deleted the files that were on it. but it still shows it has a sparsebundle file with a size of over 400gb ( probably the size of the old backups). When I use disk utility to try to erase it, I am not offered the erase tab. This "disk" does show on the desk top as a mounted disk (I think) with only 53 gb free. How can I set this up so all the disk space is free and I can use it for storing files, not as a back up? Thanks

In itunes library is it possible to delete more than 1 song at a time

In itunes library is it possible to delete more than 1 song at a time

Yes. Click the first track, and hold CTRL while you click additional tracks. Then hit Delete.
(If the tracks you want to highlight are in a row, click the first, hold Shift and click the last.)

Is it possible to delete the table of contents in a pdf but keep the bookmarks?

Is it possible to delete the table of contents in a pdf but keep the bookmarks?

If the TOC is located on certain pages, you can simply delete those (from the Pages panel).
Make sure it doesn't screw up with how your bookmarks work, though...

I can't connect to my MacBook becaus it won't boot. Then my iPad says I need to delete some stuff to be able to download any.thing. I know I have room but is it possible to delete without connecting?

I can't connect to my MacBook because I can't get THAT to start. It just sits in it's blue screen With the apple, spinning it's gear. All this happened after I used mackeeper. If anyone can help with that, I'd appreciate it. I've tried starting in safe mode,resetting everything but nothing happens. It's not the kernel, ive delt with that it looks like it's going to boot but it won't. Then there's my iPad which says I need to delete some stuff to be able to download anything. I know I have room on there but there are 2copies of a movie and I'd like to delete one of them. Is it possible to delete anything on the ipad without connecting to MacBook? I do have an appt later in the week but if I could fix this myself that would save me a couple hours driving time. Thanks for anyone's help in both of these matters.

Be sure Safari does not have the Block Pop-Up Windows preference set.
Where I work now there are several unencrypted VLANs that require authentication, and Safari promptly pops up a window for me to register every time.

Is it possible for deleting all the apps from the appstore which are showing up in the apps not on my phone section. Before I was able to delete them from itunes but now I am not able to find that option.

Is it possible for deleting all the apps from the appstore which are showing up in the apps not on my phone section. Before I was able to delete them from itunes but now I am not able to find that option.

You can hide them via your computer's iTunes : iTunes Store: Hiding and unhiding purchases - Apple Support
The 'x' might not show on their top left corner (it might be invisible), but clicking where it should be should hide the app.

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Well then maybe you could take a screenshot because the appearance of such a window is news to me.
Also post your OS X version and what model Mac you have. The more detail, the better. Thanks.
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse or trackpad. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
When you post your response, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
⌘ Shift 4 and then pressing the space bar captures the frontmost window.
⌘ Shift 3 captures the entire screen.
Drag the screenshot to the Trash after you post your reply.

HT201812 In the past it was possible to delete songs/tones from iTunes but this no longer seems to be the case. Is it possible to delete songs or tones if they are not duplicated - I just no longer want them in my library?

In the past it was possible to delete songs/tones from iTunes but this no longer seems to be the case. Is it possible to delete songs or tones if they are not duplicated - I just no longer want them in my library?

Howdy SJHocking,
It sounds like you want to know how to dele songs and ringtones from iTunes. Take a look at the article linked below, it’ll walk you through the process of deleting content from iTunes.
Delete songs, playlists, or other items - iTunes Help
If you have iTunes Match enabled, take a look at this article which will walk you through the process of deleting songs from iCloud.
iTunes Store: How to delete songs from iCloud - Apple Support
Cheers,
-Jason

Is it possible to delete a relationship from the BP ?

Hello experts,
I'd would like to replace a function partner SH (having the same number as the DO) by another from R3 to CRM5.
At the begining i have in R3 this partner
AG 3901007
RE 3901007
RG 3901007
WE 3901007
In R3 by the transaction VD02, I replace the partner SH by another
After the modify i have in R3.
AG 3901007
RE 3901007
RG 3901007
WE 5000000
When the replication is done in CRM using BDOC, i can see, by the transaction BP
the new ship to party partner(5000000) .
The trouble is :
When customer access to ISA (standard version) to order product, he can select the partner 3901007 as shipping adress.
By ISA, he should have the partner 5000000 only.
Is it standard or is it a sap trouble ?
Is it possible to delete a relationship from the BP ?
I don't want to delete the BP partner, i just want to delete the relationship when then BDOC arrive in CRM.
i have found the oss note 596334 497146 757955 too but it doesn't bring me a solution.
Best regards
Christophe

Hello
When you delete a Partner Function in R/3 the corresponding relationshipdoesn't get deleted in CRM. This is standard SAP behavior and not a
bug. Reason for this behavior has been explained in Note 490454.
You can change this behavior by implementing Note 497146. Also check
the note 682427 which will help you in clearing old data.

Is is possible to delete an Asset physiscally when its value is zero?

Similar Messages

Maybe you are looking for