IS IT A BATTERY PROBLEM??! PLEASE HELP!

I bought my new ipod mini in 2004 November. Since a few months ago my ipod started not 'working' properly! I switch my ipod on to listen to a few songs... after about two songs, it says NO BATTERY PLEASE CONNECT YOUR iPOD..BLA BLA. I've charged it and did everything i could but i just don't know the problem! Has my battery run out for good? My dad reckons a need a new battery!
ipod mini    

Good question
But :
1. Do you usually use the backlights, and all of stuff which seem ruin the battery ?
2. Do you charge it every time you're reaching the middle of your battery capacity (or range)… ? The first generation runs actually for 4 or 5 hours before it needs recharging whereas it was announced 8 hours… But, all of us knows that Battery Li-Ion capacity depends on how we use it…
3. Are you a hard-user ?
4. The best advice is to reset it in order it to loose its memory (I mean the bad informations it has saved), full-charge it, and then press play and let it uncharge until it shut off itself… If you have around 4 ou 5 hours (or more), you don't have any battery problem… But if you problem persists, you also need a change battery (if you are under warranty, it will be free… but if you're not… it will cost about 50 $… i don't know about the price in America and Great Britain…)
But before calling Apple, try doing the test…

Similar Messages

  • Iphone 4s battery problems PLEASE HELP

    I got my 4s about a week ago. The first couple of days i noticed the battery would go down pretty quick. So i looked online and seen all these different ways to save battery life by switching the settings around. I did all of the recommended changes ( location, brightness, etc.) i had already charged the phone the same way i would charge any phone before i read the full discharge full recharge. I did that two nights in a row and since then i let it get to atleast 2% before i charge it. Last night i put it on the charger around 20% maybe a little more and it definatley overcharged for an hour or two before i took it off. When i go to work i leave it in my locker and go on it during breaks. Normally it would never change the % while on standby and it would go down 1 maybe 2% while i use it. Today by the time it was lunch break it was down to 80%. As i type this my battery is at 64% with 2 hours and 31 minutes usage and 16 hours, 5 minutes of standby.
    What happened to it? It bothers me so much cause i love the phone and it was doing good until today.
    I JUST NOTICED that there is a new software update iOS 5.1.1. Could this sudden battery problem have occured because i am running older software??!!

    You've probabaly just installed and left running more applications. Applications dont entirely close when you hit the home screen. You've probabaly notice when you turn on your phone you have to wait through the loading screen for many applications. After that they sit on the memory of the phone, and the phone uses some battery retaining the state of each application. In Stand-By and still when powered down, your battery will slowly drain (less so when powered down).
    You may want to start force closing apps or occasionally powering down your iPhone. Additionally, the battery is not a NiCad battery where you can't charge it when it's at 80% or you'll risk causing the "battery memory" to max at 80%. The iPhone batteries are fine to be charged when they're at 95%. That said, Apple does recommend dispersing the battery to 0% atleast once a month. These batteries do have a battery charge cycle, ie: after so many charges the drain will begin to occur, but it's alot better than say your R/C car battery, or your typical rechargable triple 'A' battery.
    On another note, I do recommend you run the latest updates, if there ever is a battery issue and they know about it, they'll try to address the issue.

  • I have a  i phone 5s model number 1533 its getting little heat and battery life not longer is it a battery problem plz help me...

    I have a i phone 5S model number 1533 its getting little heat and battery life keep not longer is it a battery problem please help me...

    What troubleshooting have you done so far?

  • I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

    I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

    I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.

  • P6N Lots of problems please help

    P6N Lots of problems please help
    The setup is the following:
    P4 D935 3.2gHz
    P6N Diamond MS-7320 Bios 1.3V
    Corsair XMS2-6400C4DHX
    NX8600GT-TD512EZ/D2
    Seagate Barracuda 7200 250Gb SataII 16Mb
    Akasa 460W Dual Rail
    Please help I have lots and lots of problems with lockups that can happen any time post , bios , loading vista and sometimes during OS. Some times will work ok play games etc. Already tried different combinations fitting the mem modules even tried and some pc4200 modules same problems. Spent lots of hours clocking the mems with different settings but non is stable. I am not interested in overcloking just to make it stable to start with. When is actually running is fine is more than enough for me. Already looked to lots of posts on the msi forum but… Since the cpu is old can I go back on an older bios version???? The Corsair modules have to run at 2.1V or is it possible to use them with slower setting. So confused so lost ….. please HELLPPPPP
    Any help greatly appreciated.

    please, don't buy any more unneded parts.  first find the problem then buy if no solutions available.
    One thing I find with BIOS issues is to do a full clear.
    1. disconnect the power cord from the power supply(turn switch to off if there is one.
    2. hit the power switch to clear the power out of the system.
    3. set the cmos jumper to clear and leave there if one is available.
    4. Pull the battery.
    5. carefully short out the battery connector on the motherboard to drain any power left.
    6. press the clear cmos button and hold for 30sec minimum, if you didn't have a jumper to set. 
    7. replace battery, move jumper back, plug in power cord, turn on power sipply switch.
    Now it should hopefully power up.  go into BIOS and load optimized results. hit save and exit and when it gets back to the post screen, go back into bios and set your normal MB settings(ie. set boot devices, boot order, disable sound if using sound card, etc...)
    go into your H/W Monitor section and list the CPU Vcore settings to make sure it is getting the power it needs.  I just looked it up and it's suppose to run from 1.225v - 1.325v.
    also, try your most generic ram you have with auto settings.  the faster the ram usually the more volts they need and default volts are 1.8v for ram and sometimes faster chips have issues with lower volts.
    Let me know how this works for you.
    -=Mark=-
    ps. make sure everything is unplugged from the computer you don't need.  just cpu, 1 stick of ram, and video. and of course keyboad and mouse.  Please make a signature with all your systems specs including make and model numbers.  I hate guessing at solutions and I'd hate to see you buy any more unneccessary parts because of lack of information.

  • My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t  solve my problem. please help!!

    my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

    Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

  • Problem Please help me.....Let me know the area to look for it I am a DBA..

    Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
    Server Error in '/' Application.
    Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. 
    Stack Trace:
    [SoapException: Problem with SAP/BAPI.
    SAP.Connector.RfcCommunicationException: Connect to message server failed
    Connect_PM  MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       service 'sapmsPRD' unknown
    TIME        Wed May 04 08:59:06 2005
    RELEASE     620
    COMPONENT   NI (network interface)
    VERSION     36
    RC          -3
    MODULE      ninti.c
    LINE        428
    DETAIL      NiPServToNo
    SYSTEM CALL getservbyname
    COUNTER     1
       at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
       at SAP.Connector.SAPConnection.Open()
       at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
       at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
       at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
       at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
       System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
       System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
       SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
       SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
       SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
       SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
       SoftwareKeyUI.search.LoadRegionDetails()
       SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
       System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
       System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
       System.Web.UI.Page.RaiseChangedEvents() +115
       System.Web.UI.Page.ProcessRequestMain() +1099

    The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
    This is basically telling the requester at what port to look for the message server.
    C

  • Problem Please help me.....Let me know the area to look for it

    Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
    Server Error in '/' Application.
    Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [SoapException: Problem with SAP/BAPI.
    SAP.Connector.RfcCommunicationException: Connect to message server failed
    Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
    LOCATION CPIC (TCP/IP) on local host
    ERROR service 'sapmsPRD' unknown
    TIME Wed May 04 08:59:06 2005
    RELEASE 620
    COMPONENT NI (network interface)
    VERSION 36
    RC -3
    MODULE ninti.c
    LINE 428
    DETAIL NiPServToNo
    SYSTEM CALL getservbyname
    COUNTER 1
    at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
    at SAP.Connector.SAPConnection.Open()
    at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
    at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
    at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type)
    at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
    System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
    System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
    SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
    SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
    SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
    SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
    SoftwareKeyUI.search.LoadRegionDetails()
    SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
    System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
    System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
    System.Web.UI.Page.RaiseChangedEvents() +115
    System.Web.UI.Page.ProcessRequestMain() +1099

    Hi
    You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
    sapmsPRD      3600/tcp
    Good luck!
    René van Es

  • [TV@Master] Problem please help

    I have Msi.mother board PT8-Neo -LSR ,  Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
    the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
    please help

    i meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
    please read my reply again
    my operating system is win me and i have also another pc have XP
    when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
    but it give me this 2 mesages  when i try to install the driver
    MSI TV card is not found ,stop the installation
    the other message is
    MSI pvs driver installatin failed
    i download the driver from msi page also give me the same messages
    for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
    what to do now 

  • I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

    I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

    If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

  • My iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* to the point where i just want to smash it how do i solve this problem please help?

    my iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* me off to the point where i just want to smash it how do i solve this problem please help?

    Don't worry, just follow these steps to fix iPhone stuck on Apple logo
    => First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
    => Now install the iTunes application in your System and connect your Device with computer via Data cable
    => Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
    => Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
    I hope that will surely
    Thank you...

  • Using my macbook pro whole day with the power adapter , will it affect my battery? Please help

    Using my macbook pro whole day with the power adapter , will it affect my battery? Please help

    It doesn't affect the battery. You can use your MacBook Pro plugged in all the time without damaging the battery. You only have to be sure that you unplug it and run a battery cycle (drain the battery without letting the Mac turn off and charge it fully) at least once a month to keep the battery life.
    If you want more information about your battery > http://www.apple.com/batteries/notebooks.html

  • Hello!i have problem to insttal potoshop cs6 this is,we've encountered the following issues.installer failed to initialize.this could be due to a missing file.please download adobe support advisor to detected the problem.please,help me

    this is,we've encountered the following issues.
    installer failed to initialize.this could be due to a missing file.please download adobe support advisor to detected the problem.
    please,help me!

    Hi there Mylenium, is there any way you can help me? My cs6 is doing all kinds weird things lately. The liquifying too stopped working completely, when I try to work with the actions, it starts flickering and changing opacity in color by itself. It starts flickering and is completely out of whack! I tried uninstalling and reinstalling and still no luck. I tried getting in touch with adobe and no luck with that neither! Is there anyway you might be able to help?

  • My iPad stop working suddenly i see black screen only pressing the home? and sleep button dose not solve the  problem please help?

    My iPad stop working suddenly i see black screen only pressing the home and sleep button dose not solve the problem please help ?

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • I am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    Did you check your security software (firewall)?
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
    See:
    * [[Server not found]]
    * [[Firewalls]]

  • My Ipad 2 does not turn on when not plugged to electricity. Even when plugged to electricity, it constantly restarts/switches itself off. what is the problem, please help??

    My Ipad 2 does not turn on when not plugged to electricity. Even when plugged to electricity, it constantly restarts/switches itself off. what is the problem, please help??

    i plugged it and pressed the home button for a few seconds. the connect to itunes screen appeared and the moment i disconnect the cable from the electric plug, it switches off. when i connect the cable to the PC, nothing happens, its as if nothing has been done.

Maybe you are looking for