Is it a common occurance for an iPad 4th gen to just blank out and stop working? The screen shows nothing at all, no sounds but it registers on my computer when connected.

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Similar Messages

Ipod touch has stopped working. the screen showes that it need to connect to power.

ipod touch has stopped working. the screen showes that it need to connect to power.

Hey there our3goldens,
It sounds like you are unable to successfully boot your iPod Touch. I would recommend these steps specifically from the following article, named:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
If the device remains unresponsive or does not turn on (or power on), reset your device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for using Apple Support Communities.
All the best,
Sterling

My ipod 4G wont go past the apple logo when I turn it on - it will stay on the apple logo for few min, then blanks out and back to the apple logo. Tried reset option/troubleshoot several times. Also wont show up on computer at all when I plug in to USB.

Can someone please help with my issue listed - My ipod 4G wont go past the apple logo when I turn it on - it will stay on the apple logo for few min, then blanks out and back to the apple logo. Tried reset option/troubleshoot several times. Also wont show up on computer at all when I plug in to USB.
Any tips are very much appreciated.

Place the iPod Touch into DFU mode. This will be similar to what the factory would do to install the iOS onto new iOS devices.
Placing it into DFU mode will allow you to "format" and install the current iOS for that device.
To place your iOS device into DFU mode.
First connect you iOS device to you computer.
Open iTunes if not already open
Now turn off your iOS device using the power swipe.
Press the home and sleep button on your iOS device for 10 seconds.
Release the sleep button but carry on holding down the home button. For another 10 seconds.
Your iOS device should now be on DFU. Click on restore and iTunes will download the latest iOS for your device.
Hopefully that sorts it if not, you will have to go to a service centre or call Apple Care up and get them to collect it and repair it. (replace it) Or go into an Apple Store.

My ipad 1st gen has loads of coloured lines going across the screen so I can't see any ideas ?

My ipad first gen has loads of coloured lines going across the screen so I can't see any ideas ??

Try a reset: Press and hold both Sleep/Wake and Home buttons until the Apple logo appears.
If that didn't fix things, do a restore:
http://support.apple.com/kb/HT1414
If that still didn't fix the issue, then there is probably a hardware problem.

Ipad 4th Gen Siri runs by itself and reboots by itself

Ok SO I have this wacky Ipad 4th gen that was stuck in reboot mode with low battery.
I got past that and restored the Ipad now the thing will start Siri all by itself without me touching the home button and some times for no reason it will just shut down and restart by itself.
It seems on occasion the Sleep/Wake button will not communicate with Ipad or possibly teh Home button is stuck or something ad I have found that SIri starts all by itself and I cannot back out of apps some times by using the home button.
Could it possibly be something going on with teh home button itself and how would I go about testing it and possibly fixing it? Are they connections that can be cleaned with electrical contact cleaner? I have a couple different types that I use on my Peavey Amps and my Behringer Mixer so I know they are safe for plastics and switches, buttons , linier sliders etc..
I was in process of buying this from my neighbor then his wife wanted it back and it started erroring so she opened it and I am not sure if possibly it could of damaged a Ribbon or possibly teh memory cpu?
I cannot see anything obviously wrong with ribbons etc. Except the Digitizer cable did get bent and kinked a bit but it seems to work fine.

If the neighbor's wife opened the iPad up for any reason at all, I surely would not want to purchase it now. She may have done damage to it and I wouldn't take the chance.
If you don't want to shell out the cash for a new device, buy a refurb from Apple and get something reliable or some thing that at least has a warranty of some kind.
Leave the iPad and it's repairs for your neighbor and walk away.

Attention to the apple developer, u need to check the issue about the iMovie which installed in an iPad 4th gen. Is having a problem during closing the app from the theater page to the home screen. It doesn't closes exactly severally...

Attention to the Apple developer, the iMovie which installed to the iPad 4th gen. has a problem when it's opened at the theater page it frequently couldn't be closed down to the home screen. The app page is actually blinking and cannot tap onto anything..

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

I have 1 ipod but have diffrent acounts. my computer is setup for my ipod 4th gen that i had stolen and i would like to sync all of that music to my older nano. is there a way to do that without wiping out all my old songs that were on my nano?

so i have one ipod and it is a 2005 ipod nano. i have plugged into my computer and i cant get to the music on it. i am trying to burn it onto a disk or even a diffrent folder on my computer so i can just have select songs on my ipod. the reason i have 2 diffrent accounts is because i made a new account for my ipod 4th generation and it got stolen. so now i have my older ipod. is there a way to get it onto my computer with out wiping all my old songs on it?

iPods do not work with "accounts." They work with your iTunes library. You don't have to set up a new iTunes library for each iPod. One iTunes library can sync with as many iPods, iPhones, and iPads as your own, at the same time. iTunes connects to and treats each device separately.
However, if your iPod nano is set up for automatic syncing with an iTunes library that is NOT your current iTunes library, you cannot sync your current library to it without replacing its existing content. Do you have access to the previous iTunes library, the one the iPod currently synced to? If so, you should transfer your song files from that iTunes library to your current iTunes library. Then, sync our iPod to your current iTunes library. You can post back to get more info about the procedure.
If you don't have access to that previous iTunes library, the approach is to first offload the song files from the iPod to your computer's drive, then add the song files to your current iTunes library.
You cannot use iTunes to transfer song files from iPod to computer, except for songs purchased from the iTunes Store. However, there are third-party methods and utilities that can transfer from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
You can then sync your iPod to your "consolidated" iTunes library.

I was playing with my ipad settings (it's an older model) and noted in the advanced settings of Safari there was a place to view website databases. When I clicked on this I saw websites. How do these get there and what does the space amount mean?

I was playing with my ipad settings and noted in he advanced settings of Safari there was a place to view "website databases". When I selected this I saw a multitude of websites.
Can anyone tell me how these get there? Can a website be posted even if it was never went to? What does the space amount mean? For example, 1.5 kb...is this quite a bit? Would it indicate someone has gone to a site multiple times?
I share my ipad with my teenage daughter and I'm trying to find out if she's lying to me. Obviously she's swearing that she has "no idea" how these got there and I'm trying to keep her safe (she's only 14).
Thanks everyone.
Concerned Mom

Think of your PC and the 'temporary internet folder' where it keeps cached copies of web pages or elements off a web page for 'quicker display the next time you visit'. That's pretty much what that folder is. 1.5K is tiny. Probably just a basic page with some text on it. (you might be confusing 1.5K with 1.5 megabyte....megabyte is large...it's roughly 1000 kilobytes, so the 1.5K is a tiny file)
As far as I know, the only way info gets into that folder is if the browser has been to that site.
if you have a concern there are browsers out there, McGruff is one i've seen recommended, that allow some degree of parental control and supervision. That or you could passcode lock the iPad or enable the restrictions to turn off some parts of the device to have some control.

[iPad] Demo stuff for my iPad 4th gen?

Hi - I like the demo stuff that is in the Apple Stores. How do I get it on my iPad?
I know, it’s not available normally, but I want the demo loop screensaver.

Demo iPads have a special version of iOS installed on them, which isn't available for retail models.

My ipad 4th gen 32gb keeps crashing everytime i use a app that deals with a map?

I updated my ipad 4th gen 32gb to iOS 7 and since then anytime i use a app that deals with a map it crashes for instance find my iphone, find my friends and the built in map app on the ipad. I restored the ipad when it first started happening and its still doing it. I do the soft reset and it seems to do not a thing to help out the matter. The first time it happened i was using my built in map app and the ipad started crashing and wouldnt stop, it went on for like 3 hours kept turning on and turning right back off when it turned back on and it would do that for the whole 3 hours it probably crashed and turned back on 200 times. I had to do a command reset using itunes on my macbook pro to get it to stop doing it and ive not used the map app since because of it. So recently ive used find my friends and find my iphone and it would crash my ipad once and when it came back on it wouldnt crash again so i would just go and kill the app that caused it to crash.

I restored my ipad as a new ipad deleted all the backups for the ipad from my itunes and then set it up as new and put all my photos and music and apps back the way they was and i havent really messed with the apps with maps in it but the crashing is still happening and its happening inside the settings app id love if someone could help me out its starting to get pretty annoying. Thanks.

TS3376 I had my iphone set up to be tracked as registered with iCloud and it had been using it for a year one day it said no devices registered and stopped working why???

I had my iphone set up to be tracked as registered with iCloud and it had been using it for a year today it said no devices registered and stopped working even though i tracked the selected iphone 4 device an hour earlier why did it do this???

So basically the phone I was tracking was working an hour earlier it had no signal at times when it did pick up a signal it located it easily but an hour later the message came up no devices registered when my friend returned home I Checked the device I was tracking to make sure find my iphone was on but it was off and my friend didnt turn it off so my question is why did it turn itself off???
Confused?

Recently updated ipad (4th gen) to 8.1 and iCloud not syncing Contacts, Notes etc.

I recently updated my iPad 4th gen to iOS 8.1 and upon setting up the iCloud, I've found that myiCloud data is not getting updated in my iPad. I o not see my contacts, notes safari bookmarks etc. I signed into iCloud.com from a PC on chrome to see if i had accidentally deleted the stuff, but it's all there. It was working fine when i was on ios 7.0.6. I also have an iphone 5s running ios 7.0.6 on which the icloud runs very fine. i make changes on my phone and they are reflected on the browser in my pc (eg: notes edit on the iphone 5s shows a change in my browser on pc, also changes done using browser show in my iphone, but not iPad). I have tried restoring my ipad to a clean ios 8.1, switched on and off the icloud options, signed out signed in, restarted, but nothing seems to work. My contacts, notes are empty.

Try reset iPad.
Hold the Sleep/Wake and Home button down until you see the Apple Logo.

Ipad(4th gen) does not connect to Laserjet 100 color MFP M175nw for AirPrinting

Hi,
I have a problem with Laserjet 100 color MFP M175nw and Airprinting.
Ipad(4th gen) cannot connect to printer for AirPrinting.
Wireless Direct is set on in the printer.
When I choose to connect to printers own wifi network with my Ipad, it can't connect.
(Ipad doesn't show the wifi symbol on top left corner.)
And if I try to print with Safari, it says "AirPrint-tulostimia ei löytynyt" which means in english "No Airprint-printers found".
I have all installations by the guide book several times, but seems that this Airprint simple doesn't work.
Device Configuration show this:
Installed Personalities and Options
PCL6           (20040201)
AirPrint
PCL              (20040201)
PDF              (20040201)
PS                 (20040201)
I wonder why AirPrint has empty value? (what ever this might mean)
Br,
Heikki

Hi,
Thank you for your reply and first action plan to find a quick fix.
Unfortunatelly even though I disabled IPv6, it didn't fix the problem. Also reboot and WIFI restart has been tryed sevelar times without any help. Ipad Safari is still giving me a message "no airprint printer found".
Same problem also when I try to print so that both Ipad and printer are connected to my home WLAN/DSL-router.
I don't see any problems for the printer to connect my home WLAN, both printer and Ipad has received an IP address from the WLAN router.
My router model is Zyxel AMG1202-T10B.
Ipad is updated to it's latest SW version which is 7.0.6. and printer's firmware date is 20131028.
I have no problems printing with my Windows 7 desktop computer which is connected to same network as well.
Windows 7 PC is connected to router via Ethernet. Printer is connected to router via Wireless, not ethernet.
Here is the network settings from HP Device Toolbox:
Network Summary
TCP/IP(v4)
Status (Wireless) Ready
IPv4 Address: 192.168.1.38
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
IP Configured By: DHCP DHCP/BOOTP Server: 192.168.1.1
DHCP Expiration Time: 02:23:54 (Days:Hours:Minutes)
WINS Server: 192.168.1.1
Preferred DNS Address: 192.168.1.1
Alternate DNS Address: 0.0.0.0
TCP/IP(v6)
Status: Disabled
Network Identification
Host Name: NPI08C7AB
Domain Name (IPv4/IPv6):
Domain Name (IPv6 only):
Bonjour Service Name: HP LaserJet 100 colorMFP M175nw (08C7AB)
Bonjour Domain Name: NPI08C7AB.local.
Bonjour Highest Priority Service: IPP Printing
Wired Network Configuration
Status: Not Connected
Hardware Address: 2c:44:fd:08:c7:ab
Link Speed and Duplex Negotiation: Automatic
Auto Crossover: Enabled
Wireless Network Configuration
Status: Connected Wireless: On
Network Name (SSID): Galactica
Communication Mode: Infrastructure
Authentication Type: wpa-psk Encryption: tkip+aes
Hardware Address: bc:85:56:ee:02:d3
Access Point Hardware Address: 28:28:5d:7c:23:a0
Channel: 10
Signal Strength: Excellent
Wireless Direct Setup
Status Enabled
Wireless Direct Printing Name (SSID) HP-Print-d3-LaserJet 100 Wireless
Direct Printing Channel 10
IP Address 192.168.223.1
SNMP
Status: Read-Write Access Enabled
SNMP Version: 1
Set Community Name: Not Specified (Defaults to 'public')
Get Community Name: Not Specified (Defaults to 'public')
Network Statistics
Total Packets Received: 428
Unicast Packets Received: 414
Bad Packets Received: 0
Framing Errors Received: 0
Total Packets Transmitted: 493
Unsendable Packets: 10
Transmit Collisions: 0
Transmit Late Collisions: 0
WS-Print Users: 0
Enabled Features
IPv4: Enabled
IPv6: Disabled
DHCPv6: Enabled
LPD Printing: Enabled
Bonjour: Enabled
SLP: Enabled
WS-Discovery: Enabled
SNMP: Enabled
Show IP Address: Enabled
LLMNR: Enabled
Security PJL Security: Disabled
Please let me know if you need any other additional information.
Br,
Heikki

HT2305 I have forget my 4 digit passcode for my ipad 3 and exhausted all the attempts, Now the screen shows "ipad is disabled connect to itunes" How can I unlock my ipad now. Also I have not put "Find my iphone" in icloud as well. Please guide me to unloc

I have forget my 4 digit passcode for my ipad 3 and exhausted all the attempts, Now the screen shows "ipad is disabled connect to itunes" How can I unlock my ipad now. Also I have not put "Find my iphone" in icloud as well. Please guide me to unlock it.

Also when I am trying to connect ipad to my windows PC, it shows, your software is up to date and later starts restoring while updating again. Then automatically it stops to update halfway and I have to repeat the process again and again, still in vain.

After updating my iPad 2 to iOS 6, I cannot connect to my router. I have turned the router off, left off for a considerable time, turned the iPad off and on, reset the network settings, nothing works. Any other suggestions?

After updating my iPad 2 to iOS 6, I cannot connect to my router. I have turned the router off, left off for a considerable time, turned the iPad off and on, reset the network settings, nothing works. Any other suggestions? It is obvious many others are having similar problems, so the iOS 6 looks like a loser.

I have just upgraded from a 3 to a 4S and now I can't connect to my wifi. I've tried everything, resetting network settings, switching to boot, renewing lease, rebooting, turning off cellular data etc etc. nothing works!! Very frustrating!

Is it a common occurance for an iPad 4th gen to just blank out and stop working? The screen shows nothing at all, no sounds but it registers on my computer when connected.

Similar Messages

Maybe you are looking for