Is it a good idea to install an SSD as the main drive and a regular HD for data?

Please help me make the best decision on making my machine faster without having to purchase a new one!

Nothing is going to make that system any faster. The Speed of any system it determined by the speed of the CPU, RAM and Graphic processor. The speed of the hard drive or SSD has little to do with the overall speed of the system.
Yes with a faster hard drive and certainly with a SSD the system will boot faster and load programs faster, and with some programs that use the storage media (HDD or SSD) to store files while running, which will SEEM to make the whole system faster, but in reality it is not. The CPU and memory can only do so much in any given time period. With newer systems that speed is faster then with older system and there is nothing you can do to make an older system as fast as a newer system with a more modern, faster, CPU and faster RAM.

Similar Messages

Is it a good idea to only save my photos on iCloud Drive instead of paying extra for phone storage?

I'd rather not pay too much for extra storage space when I buy my phone and I am willing to pay 0.99 cents per month for iCloud Drive.

Given all the issues people are having right now with iCloud Drive you would be better off waiting for iCloud photo library to be introduced later this year. It's designed for allow you to keep your photos in iCloud without having to store them all on your phone. Besides, you have to use iCloud Drive compatible apps to access documents and data on your iCloud Drive, and as far as I know, there aren't any such apps to access or store photos there from your iOS devices yet.

Want to install SSD and make it the main drive

Hello, I just purchased my Lenovo IdeaCenter H530 Desktop and straight away installed a GT640 video card. Everything seems good and I'm waiting to install a SSD. I would like to run windows 8.1 from the SSD as the primary drive, and use the 1TB HD as a storage drive for files etc.
How should I install the SSD, which BIOS settings should I change, and how can I get windows transferred from the 1TB HD to the SSD, and make sure that windows boots from the SSD? Is there an online tutorial for this? Or could someone talk me through this? Thanks!

hi jenny0101,
Welcome to Lenovo Community Forums!
The only concern here is transferring the Windows OS to the SSD drive and everything else remains as it is now.
You can Try Paragon Backup & Recovery 12 Home
I can say
Clone the Drive to your SSD Replace the HDD with your SSD using the same connection and it should work.
You can check this post by neokenchi
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Unable-to-Migrate-Windows-8-to-an-mSSD-y500...
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Can I install a SSD on an optical drive in a HP Envy Phoenix

I just purchased a customized HP ENVY Phoenix Desktop - 810-350se CTO with a Raid 5 configuration (3 x 2 TB), but I noticed and researched that it seems that is better to have a SSD installed to have your computer access data faster, of course, I want to use it for the OS installed on it. So I have two questions?
1.) Can I change the configuration so I can add an SSD on a optical drive? (This will be the 4th drive). Since I am already using 3 HDD on a Raid 5 configuration and there wouldn't be any more space left, I am assuming that I can only use an empty optical drive space and install an SSD?
2.) Is there a limitation of how many drives and capacity HDD can be installed on the motherboard?
My proposed solution is to keep the 3 HDD and install a 4th drive (SSD) on the optical drive and use it for the OS (Windows 8.1).
Any suggestions and/or recommendations is highly appreciated it.
Thank you.
3rd Generation Intel(R) Core(TM) i7-4960X processor
•4TB 7200 RPM SATA 6G RAID Hard Drive
This question was solved.
View Solution.

Hi,
Your PC is already using a Windows 8 boot loader and if you load the SSD in UEFI mode then you will add another Windows 8 boot loader to the eligible boot device menu. This will lead to confusion. I would suggest that you avoid this situation by trying the following procedure:
Be sure to create the external HP recovery media
Install the SSD on port 1 or 2
Disable secure boot in the BIOS and switch to legacy mode
Boot into the Intel OPROM and rebuild the RAID 5 array
Boot back into the BIOS and enable UEFI mode
Boot the external HP recover media and load the SSD (SSD recommended size is 240 GB or larger)
Once you are up and running then go into Disk Management and format the RAID array as GPT
The above procedure may or may not work but it's what I would first try.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Installing OS 9 on the external drive ?

First some background info:
I bought an external HD (the OWC Neptune FireWire Storage Solution 320 GB).
Then I went from OS 9.0.4 to OS 9.22 over a period of 2 weeks.
I downloaded OS 9.1, used it for a few days, checked if everything is OK, then I donwloaded OS 9.2 : Same thing : used it for a few days, checked if everything is OK, then I donwloaded OS 9.2.2 which I use now for over a week.
I also upgraded the firmware, drivers.
Now, I just received the Mac OS X tiger disc. My understanding is that by default OS X installs on top of OS 9 (single partition). I can also have a separate partition and I like the advantages of this.
So the Question is :
1) Since I have an external drive, I'm thinking of installing OS 9 on the external drive, and Tiger on the internal HD. Can I do that ? (I know I can't do the opposite, nor do I want to).
2) Also can I still do a single partition (Tiger on top of OS 9) AND installing OS 9 on the external drive ? (I know I will have two OS 9 in this case, one on the HD and one on the external drive, but it is just for a small period of time, then I will get rid of one).
This way I can use OS 9 if something goes wrong in the installation.
If both solutions are possible Is there any advantage/disavantage from one option over the other ?
Keeping in mind I don't want to much hassle. This is a big step for me (anxious, depression, please hold my hand; I'm scared !)

Since I have an external drive, I'm thinking of installing OS 9 on the external drive, and Tiger on the internal HD. Can I do that ? (I know I can't do the opposite, nor do I want to).
You're a bit confused. You can install OS X on the same partition/volume as OS 9 without disrupting anything.
Also can I still do a single partition (Tiger on top of OS 9) AND installing OS 9 on the external drive?
Yes, but IMHO, there's a better way. First, partition the external HD into several partitions, at least one of 10 GB. Then, drop the OS 9 volume onto that partition. Then, boot with the Tiger disk, erase and partition the internal HD, making one at 10 GB. Then install OS X onto the other partition. When done just drop the external volume containing OS 9 onto the 10 GB partition. Then, use something like Carbon Copy Cloner, SuperDuper!, etc. and clone the Tiger volume onto the external's other partiton as your bootable backup. That allows you to have the OSs separated and also to use either OS 9 as the classic version while running OS X.
Or, you can just install OS X onto the same HD as OS 9 and they'll live happily side by side. I find having them on separate volumes the better option.

HT1424 is it a good idea to install a VPN on iphone 4

Is it a good idea to install a VPN apps on iphone 4?Is it necessary?

Flash is necessary for many sites. Just keep it updated and don't worry about a virus.

Hi. Is it a good idea to install Lion on an ibook from 2007?

I have an old ibook which has stopped working - the 'file' icon with a question mark appears when I turn on.
A local Tech shop says the machine is still good - they think I should change the hard drive and upgrade to a new operating system - Lion or Mountain Lion.
Can such an old machine take this? Is this solution a good idea?
Thoughts much appreciated.
Thanks

Hi, and welcome to Apple Support Communities.
The last iBook was discontinued in 2006.
You must have a MacBook if you got it in 2007?
Check out iBook models here:
http://www.everymac.com/systems/apple/ibook/index-ibook.html
and MacBook models here:
http://www.everymac.com/systems/apple/macbook/index-macbook.html
Which Mac is it?
If it's truly an iBook (which has a PowerPC processor), then it is not compatible with anything past Mac OS X 10.5 (Leopard).

Hi guys i had been an iPhone 5 user for about 3 years and i have recently swapped over to a samsung s4 i dont know if this was a good idea any assistance or light in the right direction would be appreciated?

Hi guys i had been an iPhone 5 user for about 3 years and i have recently swapped over to a samsung s4 i dont know if this was a good idea any assistance or light in the right direction would be appreciated?

Sorry i correct myself i had been an iPhone user for about 3 years. My last Apple iPhone was an iPhone 5. I am getting used to things with the Samsung but really think the extra features such as smart stay and scroll are coverting humans into robots. The configuration of the features is also difficult as it detects your eye movement so if the movement is out of place even the slightest the feature will not function. I think the ios user interface is simple in comparison to the android user interface. Any views are appreciated? I have many friends also using HTC and prefer it in comparison to the iPhone and Galaxy but as raymond73 mentioned choice is a wonderful thing.

Good idea? . . . Moving the Apple Mail folder to your data volume

Read the below quote from Mac Performance Guide. Is it a good idea? I know a bit of DOS, so I am used to command line commands but even after after Lloyd Chambers explanation, still not sure what is going to happen?
ln -s /Volumes/Master/Mail Library/Mail
The reason I want to move my Mail folder out of the home directory is because I plan to have a SSD as my boot drive and the home directory is on the boot drive, correct?
"Moving the Apple Mail folder to your data volume
This trick lets you move your Mail folder out of your home directory onto your data volume. I’ve used this technique for years so that I can forget about having to back up my home directory (default location for Apple Mail) and simply back up my one data volume: Master. The same trick can be used for any similarly irritating program that insists on storing its data in your home directory, rather than giving you a choice (a few programs are too brain-dead for this to work). Programs like iTunes let you choose where to put your music; use that option.
Your Apple Mail folder is in the Library folder of your home directory.
The trick requires starting Terminal. If that makes you uncomfortable, stop here! You are going to make a symbolic link.
0. Quit Apple Mail, and make a backup of your mail folder.
1. Copy the Mail folder to the top level of your data drive (or elsewhere, then modify step 3 appropriately).
2. Rename the original mail folder to Mail.old as an additional backup.
3. Start a Terminal window and type:
ln -s /Volumes/Master/Mail Library/Mail
This makes a symbolic link to the folder Mail on the volume Master (type the name of your volume, and use quotes around it if the volume name contains a space character). The resulting file Library/Mail is a tiny file that says “look over there on /Volumes/Master/Mail instead”.
From here on out Apple Mail won’t know the difference! Launch Apple Mail and verify that it worked. If you encounter problems, simply copy your backup back into place."

I just put the entire /Users/myaccount on another drive.
Unlock Account control panel - advanced options -
/Volumes/volname/Users/myaccount
Move the whole enchilada instead of just mail. Definitely want to get Safari or web browsers cache which does a lot of I/O also. maybe put /Users on 2nd SSD or 10K VelociRaptor. Or just use your 640GB drive for /Users

I want to install an SSD as my OS drive. Can I do a copy of my existing drive straight the new drive?

I wish to install an SSD as my OS drive. I seem to recall in my travels that it is possible to copy my existing OSD, install the SSD, Copy old drive info' to new drive and then set that to be the boot drive.
Any directions to where I can find out how to do this would be greatly apprecciated. Providing this can be done.

TRIM Part 2
Trim on SSD Drives
When I first wrote this article/thread, which was for my own benefit and was eventually turned into this thread, as it is today, trim was not available on ssd drives, when it did arrive, there were mixed idea’s on how it worked, a lot that was incorrect at the time, a lot of new users do not understand the use of Trim even today, explanations tend to very technical as trim is a complicated issue at the best of times. I found a simple explanation for the implementation of trim in late 2009, I came across it again the other day, it still holds true today so here’s the link, ( I know you are going to point me to AnandTech explanations, there are links in this thread, if your a technically minded person, then AnandTech’s articles may be a better option ) this simpler explanation is still active in late 2011. As you can see if you carry on reading and don’t turn off, how complicated it can be for a non-technical user of ssd drives. So here’s my explanation of trim. Remember this a generalization of most ssd drives, it’s a lot easier when your dealing with your own ssd drive.
Trim and it’s association with GC ( garbage collection ) varies depending on how the controller’s "GC" handles the use of Trim ( Win7 ). Trim is activated, by deleting files in the OS ( Win7 ), it doesn’t actually trim the ssd drive, but marks the block/file header’s with a 1 making that block/file available for being re-written or written over. Trimming is actually done by the GC and will only work if the block doesn’t contain other files that haven’t been marked deleted, but this again depends on how GC is implemented, the GC can wait till the block is full, then move undeleted files to another block allowing for the block to be trimmed ( GC ), in doing this, the GC uses a lot more write amplification than it does if Trim in win7 has previously marked these blocks/files for deletion, flash memory can only be ‘written over’ if all the information in that block as been marked with 1, this allows the whole block to be re-written. GC can only erase/Trim a full block, not individual files or pages.
What trim does is mark these blocks/files etc and make it simpler for the inbuilt GC ( garbage collection ) to recognize the blocks that are available for further use, on some controller’s this will not necessarily happen immediately, it depends on whether the controller as been designed for “idle” use, “on the fly” use or “stand by use”, GC/Trim can be brought into use in many different ways, having the computer sitting with the bios open, having the computer idling at log in, placing the computer in stand by mode, deleting files or just simple idling the computer overnight. It’s a matter of finding out how the controller in your particular ssd handles the garbage collection. You will find the most efficient way is by experimentation or by other members passing on there particular way of doing it.
Low level formatting used on conventional HDD drives writes mainly 0’s to every cell on a SSD drive, it’s the opposite to how flash memory actually works, if you low level format with Win7 or any software that writes 0’s or 0’s and 1’s to the individual cells, you are not necessarily cleaning the ssd drive completely, ( hence the need for secure erase software ), you can actually make the performance worse.
If you use software designed for writing 1’s to each cell, like you would if it was designed for ssd drives, this will “clean” the drive and is a good thing to do if you are selling the drive, or as a last resort, if you are having problems with your ssd drive. The downside of using this type of erasure, is that it not only takes a long time it uses high write amplification and if used regularly can reduce the flash cells life expectancy considerably, these type’s of deletions bypass most controllers durawrite capabilities ( the way controllers extend the life expectancy of the ssd’s individual MLC cells ), Durawrite ( Sandforce ), other controllers have this technology in some form or other, it increases MLC life expectancy by between 5 and up to 30 times depending on the design of the controller.
Basically a command line program like dispart and dispar will secure erase a ssd drive either by writing to the individual ( “Cleanall“ command ) cells or simply marking the blocks to be deleted with a 1 ( “Clean” command ), you need to use the latter which takes only seconds and will return the majority of ssd's to a new state, without impacting too much on write amplification.
That’s how I see the use of GC and Trim in win7 today ( Nov 2011 ). Note! Most ssd software, tool boxes etc use the inbuilt win7 diskpart commands, to make it easier than using the command line. There is a explanation for the use of diskpart and can be found HERE, but NOTE! It’s written with conventional hard drives in mind, not ssd drives.
In the case of most Toolboxes provided by manufacturer’s, the OCZ Toolbox is a typical example, they are incompatible with Intel’s RST driver, you would need to use Diskpart from the command line. Also Toolboxes will in most cases, not secure erase a ssd with a OS on it or if the ssd drive is in use as the OS drive eg. ( “C:/” partition ). If you want to secure erase an OS drive you need to delete all the partitions on the drive including any hidden partitions, there’s an excellent tutorial on the Intel toolbox on LesT’s website, TheSSDReview here’s the Link.
You will have to use Diskpart or Diskpar from the Dos prompt, you can’t be in windows with the ssd drive you intend to erase. This is mainly if the toolboxes fail to work and deleting the partitions refuses to solve the problem.
I’m sure there are exceptions to what I have written and easier ways of explaining trim or secure erasing some types of ssd drives. All I ask is you don’t isolate passages out of context, please read the whole article, before you tell me I’m incorrect. There are a lot of more informative people out there than me on this subject, so I’m open to criticism on the subject. I want to impart only the correct facts on this thread.
Trim and the IDE issue The Intel IDE drivers after Vista sp2 are fully compatible with the trim command , but for trim to pass through this command, the ssd controller itself has also got to be compatible with IDE mode, eg. Intel drives with the Intel controllers are ( according to Intel ) fully compatible. The Crucial M4 appears not to be, other controllers optimized for AHCI may also not be compatible. I can’t comment on the Intel 510 as I’ve only ever used them in AHCI mode.
Wearlevelling Here’s an explanation that’s not too complicated, its from StorageSearch.com, here’s the LINK.
Overprovisioning Also from StorageSearch.com, a simple explanation for the need for overprovisioning, same link as above. This actual link covers a number of technologies used by the ssd controller in ssd drives. Overprovisioning improves write performance, if the ssd is used in a high write situation, increasing the overprovisioning will improve performance and write endurance, in a high read situation, too much can hinder performance, in a os situation the 7% supplied on client drives, in most cases is probably adequate depending on it’s use, if there’s a lot of writing done to the drive daily, reducing the partition size, which will increase overprovisioning, by a small amount may improve performance.
http://forums.extremeoverclocking.com/showpost.php?p=3643482&postcount=1
Trimming SSD Performance Degradation
Thursday, October 14, 2010
Todays solid state drives are worlds apart from those of just 3 years ago, however they are not yet perfect. Performance degradation can still be observed through ‘seasoning’ of the SSD as well as filling it to capacity. SSD manufacturers have been successful in combating the effects of seasoning but performance degradation when an SSD is filled to capacity seems to be just a bit more difficult.
Typical testing of most drives, through use of random data, will result in an observable performance drop which may start as soon as the SSD is filled past the 70% mark. This article will describe the common characteristics of SSDs followed by a simple method to ensure that maximum performance is sustained with the drive.
SEASONING
Much has been said with respect to performance degradation as a result of the ssd becoming ‘seasoned’ over time. By ‘seasoned’, we mean that the drive will eventually use up all of its empty blocks of NAND, or memory and, without TRIM, the process of writing to a drive actually becomes that of reading the block of data, understanding that it is invalid, erasing and then writing rather than simply writing to a clean block. Performance is greater when writing to ‘clean’ memory vice memory which has previously been used and contains invalid data that has not been cleared. The root cause of degradation is that when a non-TRIM ssd is told to delete data, it actually only marks the area as clear which leaves the invalid data intact and tricks the ssd into believing that the NAND flash is available.
Data on a SSD cannot simply be over-written as it is done on a hard drive and this gets a bit more complicated when we erase information and the block that it is located on also contains valid information that we don’t want deleted. The process then becomes read data, recognize the valid information, move it to another clean block, erase the present block and write. Manufacturers have tried to combat this issue of performance degradation by creating 3 solutions to the problem which are wear leveling, TRIM and ITGC (or Garbage Collection).
Wear leveling
Wear leveling is the process of the ssd understanding how many times each cell of memory has been written to and then ensuring that all are all written to evenly. After all, the life span of the ssd is dependent on the total number of writes that are written to and this has been coined as ‘write endurance’. Unlike the hard drive which stores information in a static location, the SSD will move information around on a continuous basis without your knowledge to ensure that all cells wear evenly, thus affording a longer lifespan for the ssd. By also doing this, the drive can ensure that only the valid information is used, leaving blocks to be cleaned up by TRIM or ITGC, again without the knowledge of the user.
ITGC/GC (Idle Time Garbage Collection)
Garbage Collection (GC) is the process by which the SSD recognizes, in idle time, which cells are valid and which are not valid (or deleted) on the drive. It then clears the blocks of the invalid data to maintain the speed of writing to ‘clean’ pages or blocks during normal operation. GC was initially shown to be a last resort if TRIM was not available, however, recent releases are showing new methods to be very aggressive and results equal to that of TRIM are being observed. This is a huge benefit to those using RAID systems where Garbage Collection is accomplished as TRIM is not an option.
The SSD Review was able to discuss GC and TRIM with Crucial as it pertains to their SATA3 releases as it has been observed that their RealSSD C300 SATA3 drives do not appear to show any performance degradation over extended use. Crucial confirmed that they had to consider that TRIM would not pass through the present release of SATA3 drivers which helped recognize that very aggressive GC would be necessary for the C300 SATA 3 SSDs success. The subsequent result was that many forum threads were created by avid users who were questioning whether TRIM was, in fact, working in their SSDs as no performance degradation was seen even in the toughest of test beds. To dispel a common belief, it is not the Marvell processor of the Crucial RealSSD that prevents TRIM from being passed, but rather, that of the hardware and drivers of SATA3 capable motherboards. All Crucial SSDs are fully capable of passing TRIM direction to the OS.
TRIM
TRIM occurs when the ssd clears blocks of invalid data. When you delete a file, the operating system will only mark the area of the file as free in order to trick the system into believing the space is available. Invalid data is still present in that location. Its like ripping out a Table of Contents from a book. Without this, one would not know what, if anything, is contained on the following pages. TRIM follows the process of marking the area as free by clearing the invalid data from the drive. Without this, the process of reading, identifying invalid data, deleting or moving and clearing the block before writing can actually result in performance 4 times slower than it would have normally been as a new drive.
In recently speaking with Kent Smith, Sr. Director of Product Marketing for SandForce, he identified that there are many variables outside of the hardware that are responsible for users not seeing the benefits of TRIM, the first of which are drivers at the OS level which have to be working optimally in order for TRIM to function correctly. Another example occurred with early Windows 7 users testing their newly installed drives and not seeing the benefits of TRIM. Examination of these complaints revealed that users would have originally made the Windows 7 installation on hardware that did not support TRIM and then cloned to the SSD to which TRIM was supported but would not work because of the original configuration settings. The same could be said of cloning an OS that originally had AHCI turned off followed by a clone to the SSD where TRIM was not being passed, simply because AHCI has to activated for TRIM to function.
ENHANCE SSD OVER PROVISIONING MANUALLY
In our conversation, we breached the topic of SSD capacity to Mr Smith to which he replied, “Are you trying to optimize performance or maximize capacity?” which reminded us that the main purpose of the consumers transition to SSD was to maximize their system performance. Filling a drive to capacity will hinder TRIM and GC ability which will result in performance degradation. Many drives will start to display performance changes once filled to 70% capacity. Testing has shown that the user can very simply add to the drive, especially if it is a 7% over provisioned drive, by reducing the size of the partition, the new unallocated space of which will automatically be picked up as over provisioning and benefit the SSD in many ways. This idea has been tackled by Fusion IO who includes a utility within their products that allows the user complete control of the size of their over provisioning.
OWC 120Gb SSD With 16x8Gb NAND Flash = 128Gb Total (7% OP)
Over provisioning allows more data to be moved at one time which, not only enhances GC, but also reduces write amplification to the drive. Write amplification is a bit tricky of an explanation but it is the measure of how many bytes are actually written when requiring storage of a certain number of bytes. A ratio of 1:1 would be ideal but not a reality and a typical result would be an actual size of 40kb written for a typical 4kb file. In short, maximizing over provisioning and reducing write amplification increases the performance and lifespan of the drive. Over provisioning also provides for remapping of blocks should the bad blocks be discovered during wear leveling, which unlike a hard drive, does not reduce the end user capacity of the drive. The replaced blocks simply come from the over provisioning.
http://thessdreview.com/ssd-guides/optimization-guides/ssd-performance-loss-and- its-solution/
Reducing the time GC takes
Increasing the amount of freespace available after a GC (which increases the time it takes for performance to degrade after a GC)
It lets the FTL have a wider selection of pages to choose from when it when it need a new page to write to, which means it has a better chance of finding low write count pages, increasing the lifespan of the drive
Now, I want to be clear, a sufficiently clever GC on a drive that has enough reserved space might be able to do very well on its own, but ultimately what TRIM does is give a drive GC algorithm better information to work with, which of course makes the GC more effective. What I showed above was a super simple GC, real drive GCes take a lot more information into account. First off they have to deal with more than two blocks, and their data takes up more than a single page. They track data locality, they only run against blocks have hit certain threshold of invalid pages or have really bad data locality. There are a ton of research papers and patents on the various techniques they use. But they all have to follow certain rules based on on the environment they work in, hopefully this post makes some of those clear.
http://www.devwhy.com/blog/2009/8/4/from-write-down-to-the-flash-chips.html

I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

Thanks. Short of the sort of "generic" suggestions of restaring your system, if you haven't, and repairing disk permissions and verifying the disk, I don't have any advice right now. I'll do some research and see if I can come across anything. Meanwhile, someone else may have an idea.
Regards.

How to install an SSD in a MacBook Pro and keep the original hard drive

Step by step instructions on how to install a Crucial SSD as the primary drive in a MacBook Pro and use the original hard drive as a second drive in place of the optical drive.
Apart from the time needed to back up your data and clone the original drive to the new SSD, you should be able complete this in less than an hour.

Verifying
Install the SSD in the HDD slot
Install the HDD in the optical slot
Boot to the HDD and format the SSD
Boot using Command R and restore the operating system from Time machine to the SSD
Reformat the HDD and restore the data files to it.

I'm installing the new OS and iPhone is asking for a password to "restore" my iPhone, but I've never used a password for the phone and don't know what it is!

I'm installing the new OS and iPhone is asking for a password to "restore" my iPhone, but I've never used a password for the phone and don't know what it is! Can anyone help??

You selected Encrypt iPhone Backups in iTunes. Then you entered a password.
It would be that specific password it is asking for.
See here:
https://discussions.apple.com/thread/3284065?start=0&tstart=0

I have bought a dvd of photoshop elements 12. I have installed it both as the licensed version and again as a trial version. I can open organiser but when I try to open editor it asks me to sign in. Ive tried it with my ID and also tried creating a new ID

I have bought a dvd of photoshop elements 12. I have installed it both as the licensed version and again as a trial version. I can open organiser but when I try to open editor it asks me to sign in. Ive tried it with my ID and also tried creating a new ID with another email address. However i cant get past this screen - it just freezes and wont load or do anything.

Hi,
Can you please elaborate what happens when you try to Sign in?
Also , Can you please share the following logs at [email protected]:
Go to %temp% folder and share PDApp.log , oobelib.log and amt3.log
Thanks,
Shikha

HT4993 i am trying to install msnbc app from the app store and keep getting an error message. The app will not install. What can i do?

i am trying to install msnbc app from the app store and keep getting an error message. The app will not install. What can i do?

This is asked and answered many times each day. The forum search bar is on the right side of this page.
Disable your firewall/security software and try again.

Is it a good idea to install an SSD as the main drive and a regular HD for data?

Similar Messages

Maybe you are looking for