Is it a virus threat? Or just a compatiblity problem?

I used to playing a webpage game based on flash. I recently upgraded the flashplayer to 10.1.82.76 and encounter a loading problem. The notifier showed:
Error #2044: Unhandled securityError:. text=Error #2048: Security sandbox violation: http://game3my.sy599.com/manorage/0823/InitMain.swf cannot load data from http://121.101.220.135:8080/manorage/init!userLogin.action.
        at com.siku.manor.dm.remote::RemoteExecuter()[D:\Flashworkspace\ManorTime_manyou\src\com\sik u\manor\dm\remote\RemoteExecuter.as:62]
        at com.siku.manor.dm.datamodel::UserLogin/LoginRO()[D:\Flashworkspace\ManorTime_manyou\src\c om\siku\manor\dm\datamodel\UserLogin.as:39]
        at Manor/setUser()[D:\Flashworkspace\ManorTime_manyou\src\Manor.as:69]
        at Manor/loadItemsFunc()[D:\Flashworkspace\ManorTime_manyou\src\Manor.as:89]
        at com.siku.manor.dm.datamodel::GameInfo/loadItemsFunc()[D:\Flashworkspace\ManorTime_manyou\ src\com\siku\manor\dm\datamodel\GameInfo.as:548]
I really doubt for that the game includes some security problem. Is the true as I think?
Thx
P.S
OS : Windows Vista SP2-32bit
Browser: IE 7.0.6002.18005-32bit
Player: 10.1.82.76

Hi, I am not qualified to understand what you posted. However anytime I would see any "Security Error" I would take some action. Do an Online SEARCH to get some info on the error codes. However before I did that, I would run a full scan with whatever Anti-Virus program you use.
Then I would go to www.malwarebytes.org and download and SAVE to the Desktop the Free Edition. Then update it, and then I would disconnect from the Internet and Disable all Anti-Virus/Anti-Spyware/Firewalls that you have Installed.
Then I would run a Full Scan of malwarebytes. Once that is done, if anything is found, follow their instructions.
Also while still offline, I would Enable one of your AV at a time and run a full scan. Do that with each AV/AS that you have.
After that is all done, then since all of your AV/AS programs are now Enabled, Connect back to the Internet and SEARCH for those error codes.
That is what I would do and in that order.
Thanks,
eidnolb

Similar Messages

Acrobat 9.5.2 Update virus threat

AVG identifies PrintInf64.exe as a virus threat. Should I quarantine or delete it? Is the update safe?

I guess you are working on a 64 bit machine.
This file is safe for usage. Not sure why AVG is identifying it as virus.
One thing at best you can do is to delete this file and repair your Acrobat from Programs in Control Panel. This might ensure that even if this file got corrupted while installation of 9.5.2 update, the correct one gets placed.
What OS are you working upon?

I want to know that, is mozilla scans computer in order to protect from virus threats, cause last night mozill do with me same, is it a feature of mozilla or another kind fraud by someone else.

dear sir/ma'm
Last night i was surfing web, suddenly the webpage i was surfing disappeared and another page came, which was showing warning that your computer is running some suspected processes and mozilla is scanning your computer for viruse threats, please do not interrupt the process, and within a few moment so many virus list came in front of me, and then came a message click on button start potection, and a binary file also started downloading while i did not said to do so. cause i've an antivirus hence i closed the firefox and scanned my computer and antivirus show it free of viruses.
i want to know what is it??????

Sites like that depend upon JavaScript. I use the NoScript add-on which by default will disable JavaScript, and allows you to specify what sites you want JavaScript to run on. It takes a while to get NoScript set up so that you can have JavaScript enabled on the sites that you use often. There is a bit of work involved but I prefer the added protection that the add-on gives - https://addons.mozilla.org/firefox/addon/noscript/
Also make sure you have up-to-date anti-virus and anti-malware software installed. I use the free Microsoft Security Essentials - http://www.microsoft.com/security_essentials/default.aspx

Need driver or app for ms life cam 3.0 tried to get one off the internet. cisco wireless router software said malware and virus threat. Is it safe for mac?

need driver or app for ms life cam 3.0 tried to get one off the internet. cisco wireless router software said malware and virus threat. Is it safe for mac? is this software try to protect my pc or is it A threat to macs to.

There are a number of extremly dubious sites which claim to offer Drivers for common Hardware, but actually are phishing for identies and credit card numbers and candidates to join a bot-net.
Make absolutely certain you load drivers ONLY from the manufacturer's web site.

HT201303 was just having this problem until today. It is now all sorted and I can explain what to do very simply and easily.

I was just having this problem until today. It is now all sorted and I can explain what to do very simply and easily.
I remembered the answers to my questions, I just forgot "EXACTLY" how I entered the text - so I had to have them reset. The easiest way is to sign in through www.appleid.com. Then on the right click the "Manage your Account" link and sign in. Easy so far right. Then, as others have said, look on the left of the screen you will see a link called "Password and Security" - click on this. Now this is where the confusion begins. Some people have a link located directly under the existing questions that looks like this "Forgot your answers? Send reset security info email to blah blah blah email . If you see this click it and it will send an email to the "Rescue Email" address that you entered when you originally entered your answers. Follow the instructions contained in this email and you are done. If you cannot remember this email address or you have since closed it, you will need to go to the Itunes Express lane and send an email to Apple requesting them to reset your answers.
HOWEVER IF YOU DO NOT SEE A THIS LINK UNDER THE QUESTIONS - this means that you DID NOT enter a Rescue email address when you originally set your questions. The only way you can now reset your Security Questions and Answers is to go to the Itunes Express lane and email Apple asking to have these reset. I have 2 apple accounts, one for myself and one for my daughter - as I did not include a rescue email I had to email apple. On both occasions, these questions were reset and an email sent to me exactly 24 hours after I sent them the request. I entered the new details, WROTE THEM DOWN EXACTLY AS I ENTERED THEM THIS TIME, entered a Rescue Email this time and I am good to go again. Simple. Now when I log in and click on "Password and Security" I do have the reset link visable. Apple support are good, they just take a bit of time to get things done, but they always seem to get there in the end. I just wish someone had taken the time to explain this somewhere else in the forum as it would have saved me much time and angst.
To get to the Itunes Express Lane go to this website www.appleid.com make sure the correct country is displayed top right, if not change it. Once this is saved go to the tabs at the top of the screen and click Support. Then halfway down the next page you will see a photo of two random people with a title of Contact Apple Support - Click this. Scroll down until you see the itunes logo, to the right of this you will see the link Express Lane for iTunes Player and iTunes Store - click on this. One the right hand side of the next page click on the link "itunes Store". On the next page click the link "Account Management" check the radio button beside "itunes store account security", select your country from the drop down box and click "Continue". Under the heading MORE OPTIONS, you will see a clickable link called email - click this. Fill in your name, Apple ID and country. Then in the text box, write "I have forgotten the answers to my Security questions, would you kindly please reset them. Thank-You". Then Click Continue, you will be given a reference number and an email is sent to your address advising that generally someone will attend to your request within 24 hours. Like I said previously, I had to do this twice and both times it was reset however it was done within about 5 minutes of the 24 hour cut off, so you will have to be patient. I know 100% that this works for Australia - I am guessing other countries should be similar. Hope this helps someone somewhere!

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

What version of the following programs (LasPass, Kaspersky anti Virus, Internet Download Manager) are compatible with Mozilla Firefox 15.0.1?

what version of the following programs (LasPass, Kaspersky anti Virus, Internet Download Manager) are compatible with Mozilla Firefox 15.0.1?

Lastpass 2.0.0, Kaspersky 2012, 2013 and Internet Download Manager 6.12 build 21 are fully compatible with Firefox 15. If you are having any issue, let us know :)

WRE54G just creating more problems

I have a WRT54GS router in my home and I often use my Toshiba laptop in a room about 5 walls away. With just the router I get a "very low" signal and it tends to drop out a lot.
To remedy this problem someone suggested I get a range expander. So I did. And after spending over 2 hours setting it up yesterday (there are at least 6 other wireless networks in range so the setup was very complicated - the extender kept logging on to other unsecured Linksys networks) it seemed to be working ok. But the bliss only lasted about one hour.
Here's the problem:
When I turn on the laptop it tries to log on to the weak router signal instead of the extender signal. This is because it takes about 2 minutes before the extender signal is even found. When the extender is found the computer gets confused and starts to log in again - this time through the extender. But for some reason it has a VERY hard time getting a new IP address. Thus it takes almost 5 minutes before the network works again.
Questions:
1. Isn't the extender signal supposed to be there all the time? it seems like the signal only appears after a computer logs in to the network.
2. why is my computer having such a hard time obtaining an IP address from the extender? All the settings are exactly the same on the router and the extender.
3. am I crazy or is this thing just causing more problems?\
mor10
*frustrated*

hi..first off, ensure that both , the wre54g and wrt54gs have the latest firmwares on them...
after upgrading the firmware , reset the router for 30 secs and reconfigure it....
change the ssid , channel 1 or 11, change the beacon interval - 50 , fragmentation threshold and RTS threshold - 2304 ...
if u have a wre54g v1 range expander , reset it for 20 secs and then press the autoconfig button on it..this should configure the range expander..
if u have a wre54g v2 , connect it to the computer.. assign an ip add on the comp
192.168.1.10
255.255.255.0
192.168.1.240
and try accessing http://192.168.1.240 . Keep the username blank and password as "admin".. once u logon to the ui .. make sure that the wireless settings are same as that of the router..
remove the static ip from the computer...do a power cycle....
this should configure the range expander...
and place the range expander somewhere in the midway ...

I'm having trouble with my new iPhone.it seems it likes to turn it self off for no reason at all.i would like to know is this a hardware or software problem or just a iPhone problem i don't know.

I'm having trouble with my new iPhone.it seems it likes to turn it self off for no reason at all.i would like to know is this a hardware or software problem or just a iPhone problem i don't know.

basic troubleshooting steps from the User Guide are restart, reset, restore from backup, restore as new.
Have ANY of these been tried?

Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is

Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is plugged into itunes. Can't even restore it. I get Error 1415?

Hi clarity,
Welcome to Apple Support Communities.
You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
Best,
Jeremy

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR

I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR I never had this problem before was there some kind of update that could of cause this?

I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"......

I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"...... I then decided to try and reload the Canon printer drivers and for some silly reason I deleted the existing Canon printer drive. Now I cannot load them from the CD provided with the printer or from downloads through the Apple store. If anyone out there could help me I would be greatly appreciated......

These Canon printer/scanner drivers from Apple - http://support.apple.com/kb/DL899 - should work. The MP250 is listed on the support page. Try downloading and installing them.
Good luck,
Clinton

Got iChat to work, just one little problem...

After a long period of constantly getting the message: couldn't connect because 'user' didn't reply", I've managed to get iChat to work again - sort of. I set my outgoing port to 443 under Accounts, and in my router configurations. There is just a small problem, it seems I have to restart my router for it to work - every time.
If I restart my router, then iChat will gladly open a videochat afterwards, and it works every time I start a new chat, until I quit iChat. If I quit iChat and then start up iChat again, it won't work, and I'll get the same 'didn't reply' error message. If I restart the router again however, it will work again.
Just wondering if anyone knows why this is or what can be done about it.
iChat used to work a treat for me every time, until I installed a Tiger update, I believe it was 10.4.3 - then everything stopped working properly in iChat...
Would appreciate if there were any tech-savvy iChat users out there. I haven't been able to use iChat properly for months (without having to restart the router every tim- which I just figured out) Thanks!
20" iMac G5 Mac OS X (10.4.6)

It sounds as if you router isn't responding to UPnP commands correctly. Some routers have UPnP but are not certified.
You may want to consider setting a static IP address on your MAC, then port forwarding the correct ports in your router to you mac.
You can find step by step instructions for most routers at:
http://www.portforward.com

I'm Looping for an european Mains adapter for my iPad air but not the hole adapter just the compatible top

Hi everybody, I'm looking for an european mains adapter for my iPad air, but not the hole adapter just the compatible top. Do You Knowledge if I can Bus ist anywhere?

Perhaps this. Or any ordinary travel adapter you can buy at any airport or electrical store.

I just posted a problem and gave you my email that i cannot get into.

#
i just posted a problem and gave you my email that i cannot get into. i have another email address for you to send an answer for me. [email protected]

What does the page say? What do you need help with?

Is it a virus threat? Or just a compatiblity problem?

Similar Messages

Maybe you are looking for