Is it advisable to change the hub name and or pass...

My BT Broadband was activated yesterday - HH 4
Is it advisable to change the hub name and or passwords issued by BT or is it OK to stay with the BT default name and passwords.
Solved!
Go to Solution.

If you found this post helpful, please click on the star on the left
If not, I'll try again

Similar Messages

Is it possible to change the font name and size without having to compile?

Dear All
We have one requirement that we need to change the font name and font size at run time dynamically without having to compile all the forms in 6i.
Is there any way or work around to achieve the same.Kindly suggest us.
something like using uifont.ali or forms60_defaultfont, or set_item_property
Thanks and Regards
Thangaraj.

Dear All,
Thanks for your updates, Technically what both of you said is correct. but in application server we used something like ClientDPI to match the client server font with the application server, i need to know that is there anyother way something like this...?
I have read one document(Note:28397.1 in metalink) saying that using uifont.ali file we can change the font at run time, but i have used this only for report
Thanks and Regards
Thangaraj.S

HT201240 I have a new macbook pro that did not have a disk, OS X was pre installed so how can i change the administrators name and password, it did not migrate properly from my hard drive.., so how do i

I have a new macbook pro that did not have a disk, OS X lion 7.3.4 was pre installed so how can i change the administrators name and password, it did not migrate properly from my hard drive.., now there is some mysterious administrator name and or password??

See #5
Step by Step to fix your Mac

How can I change the "folio name" and the "publication name?

Hello,
We have posted a Multi-folio App a single folio in it.
We would like change the "folio name" and the "publication name” and we tried to do this using the dashboard. However, when clicking “update” we unchecked the “update content” checkbox, because there are no changes to the folio’s content. The problem is that this didn’t change anything in the app: both the "folio name" and the "publication name” remain unchanged…
Is it possible to do this without having to repost this folio?
Thanks!
Olivier.

The metadata is considered part of the content. Click update again and leave the "update content" checkbox checked.
Neil

How do i change the administrator name and password when i forgot both of them

how do i change the administrator name and password when i forgot both of them?

Find the user name and then reset the password.
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Note down the user account name.
Enter a new password.
Reenter the new password for the user.
Note it down.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

How do I change the admin name and password on my iMac?

How do I change the admin name and password on my iMac? It's been about two years since I've done that and I've totally forgotten how to. Your help is appreciated!

Hi Haldane, and a warm welcome to the forums!
Changing the name can be dangerous, use ChangeShortName 10.4 only...
http://www.macupdate.com/info.php/id/16620
Many way to change the PW then, the Accounts Pref Pane, unlock the Lock, click on change Password.

How do I change the administrator name and password?

I am trying to put some needed applications on my G3 Lombards and it won't let me because the previous administrator of the computer failed to erase all of his info before I bought it.
How do I change the administrator name and password?
This is the most ridiculous thing I have ever seen yet.
Please help. FAST
Edited by an Apple Discussions Host

Robert:
May I strongly urge you to get a set of installer CDs. They will come in handy as you need them for much more than just installing the OS. From time to time, e.g. you may need to boot from the installer disk to Repair Disk (you can Repair Disk Permissions from Disk Utility on the HDD, but to Repair Disk, you must boot from a different volume). And if you had installer CDs changing the password and creating a new Admin Account would be a breeze.
You can get universal installer disks at applerescue. Another option in your situation is to do a complete re-install. That will not only enable you to create your own admin account, but it will automatically change the computer short name. However, for that you need installer disks.
Meanwhile, <a href=""http://discussions.apple.com/thread.jspa?threadID=121786&tstart=0>here is another article that should help.
Good luck.
cornelius
Message was edited by: cornelius

I changed the Computer Name and i can not run EM.

I had to change the computer name in order to connect to the intranet.
I updated the listener.ora and tnsnames.ora with the new computer name.
I can run SqlPlus but i can not run EM on http://tahirpc.isu.intranet:1158/em *
I checked Services and I saw that OracleDBConsoleorcl service do not work. I get error code:2 when i try to run it manually.
What should i do?
New computer name: tahirpc.isu.intranet
Old computer name: mtkeskin.isu.intranet
OS: Win 7
Oracle: 10.2.3
------------------------

Thank you Jean-Valentin . I tried those but unfortunately this did not work.
Here is what i did on CMD:
RECREATE
C:\Users\mtkeskin>EMCA -CONFIG DBCONTROL DB -REPOS RECREATE
STARTED EMCA at 28.Oca.2010 11:28:43
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: ORCL
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user: l
Password for SYSMAN user:
Password for SYSMAN user: Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ D:\oracle\product\10.2.0\db_1
Database hostname ................ tahirpc.isu.intranet
Listener port number ................ 1521
Database SID ................ ORCL
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: Y
28.Oca.2010 11:29:07 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-01-28_11-28-42-AM.log.
28.Oca.2010 11:29:24 oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
28.Oca.2010 11:32:09 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
28.Oca.2010 11:32:10 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
28.Oca.2010 11:37:14 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
28.Oca.2010 11:37:34 oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing CMD /C D:\oracle\product\10.2.0\db_1\bin\emctl.bat depl
oy dbconsole D:\oracle\product\10.2.0\db_1\tahirpc.isu.intranet_ORCL tahirpc.isu
.intranet:3938 tahirpc.isu.intranet ORCL
28.Oca.2010 11:37:34 oracle.sysman.emcp.EMConfig perform
SEVERE: Error instantiating EM configuration files
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-01-28_11-28-42-AM.log for more details.
Could not complete the configuration. Refer to the log file at D:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-01-28_11-28-42-AM.log for more deta
ils.
DROP
C:\Users\mtkeskin>EMCA -DECONFIG DBCONTROL DB -REPOS DROP
STARTED EMCA at 28.Oca.2010 11:47:57
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: ORCL
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: Y
28.Oca.2010 11:48:13 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-01-28_11-47-56-AM.log.
28.Oca.2010 11:48:17 oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
28.Oca.2010 11:48:18 oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
28.Oca.2010 11:50:35 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
Enterprise Manager configuration completed successfully
FINISHED EMCA at 28.Oca.2010 11:50:35
CREATE
C:\Users\mtkeskin>EMCA -CONFIG DBCONTROL DB -REPOS CREATE
STARTED EMCA at 28.Oca.2010 11:54:55
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: ORCL
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ D:\oracle\product\10.2.0\db_1
Database hostname ................ tahirpc.isu.intranet
Listener port number ................ 1521
Database SID ................ ORCL
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: Y
28.Oca.2010 11:55:19 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-01-28_11-54-55-AM.log.
28.Oca.2010 11:55:32 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
28.Oca.2010 12:00:13 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
28.Oca.2010 12:00:27 oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing CMD /C D:\oracle\product\10.2.0\db_1\bin\emctl.bat depl
oy dbconsole D:\oracle\product\10.2.0\db_1\tahirpc.isu.intranet_ORCL tahirpc.isu
.intranet:3938 tahirpc.isu.intranet ORCL
28.Oca.2010 12:00:27 oracle.sysman.emcp.EMConfig perform
SEVERE: Error instantiating EM configuration files
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-01-28_11-54-55-AM.log for more details.
Could not complete the configuration. Refer to the log file at D:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-01-28_11-54-55-AM.log for more deta
ils.
I checked log files but i did not understand anything of 'em :(
Edited by: NaKKaSh.TR on 28.Oca.2010 12:12
Edited by: NaKKaSh.TR on 28.Oca.2010 12:14

I changed the user name and screensaver does not let me enter

I changed the user name this morning, later the screensaver popped up. The screen shows the old user name and does not accept the password, so i cannot even open the main page.

Change it back, then:
How to change user short name or home directory name
http://support.apple.com/kb/HT1428?viewlocale=en_US
Also, this might be useful:
http://www.macworld.com/article/132693/2008/03/changeshortusername.html

Changing the server name and IP of an instance

I am moving QAS to another partition. I did a full system backup and restore to the new partition name and IP. QAS will not start on the new partion. What is the simplest way of migrating this instance into the new partion with a different name and IP? Do I need to reinstall or can I change the profiles so that it will start up.

That worked and the create system ran... but, I get this error as I deleted the profiles and the trans config
                                                                                Program XDNCONTROL in library *LIBL not found.
Error found on CALL command.
Environment variable added.
Job 001402/QASOFR/STRRMTDB submitted to job queue QBATCH in library QGPL.
Environment variable removed.
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
O4STRSAP: Could not retrieve instance/system configuration for instance 02
   of system QAS on host PPAK0055 from directory
   "/usr/sap/trans/config/QAS".
Ownership of object SAPIPCFG in QTEMP type *USRSPC changed.
Ownership of object SAPIPCFG in QTEMP type *USRSPC changed.
O4STRSAP: Starting instance 02 of system QAS on host PPAK0055 is not
   possible. System configuration can not be retrieved.
Errors occurred in command.
Bottom

How to change the network name and line name on iPad 4?

Could anybody help me how to fix this problem?
Previously I used qb (a mobile network in Cambodia) for my iPad 4 (iOS 7.0.4 non-jailbreak) the network name is qb.
The problem is that after I changed to use SMART (another mobile network in Cambodia) for this iPad the network name is still in QB and the Line name changed to SMART.
I don't know how to fix it now.
I have tried many methods as in restore through iTunes, reset network setting, reset all setting... but I still could not get the solutions.
I do hope to get it fix through all your experience.
Regards,
Panharith

Hi Anikesh
using SU01..u can change the password but can't see the old password..
Hope this helps, reward with points if it does...;-)
Regards,
Tejas

How to change the OS name and pass of database server.

Hi,
I have a problem with OEM of oracle10g is not running after changing the OS's (windowsXP and Linux 4.5 ) Name and IP-Address, What should I do? OR
Can anyone give me the metalink document ID to resolve my problem?
My Database Version is below:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Thanks,
Faziarain

[email protected] wrote:
But, How to re-create it?Use the following commands. 1st would drop the repository, 2nd would create it.
emca -deconfig dbcontrol db -repos drop
emca -config dbcontrol db -repos createPlease note that these commands must run from the terminal/command prompt and not from the sql prompt.
HTH
Aman....

I can no longer change my song names like i used to. i use to be able to right click and go to "get info" and then change the song name, artist and album, now i can't is there any other way to change the songs name and info

When I get songs and put them on my itunes accout on my computer I used to be able to rename them right clicking, going to "get info" and then renaming everything I wanted like song name, album and artwork. I also use to be able to click on the song then click and hold on it and be able to rename it. But all the songs I have gotten after the last update have not been able to be renamed in any of the old ways I use to be able to. Is there any other way to rename songs because I know I can't undo updates and that seems to be whats causing it.
Thankyou for your time

You are describing an iTunes problem, not an iPod touch problem. Try posing in the iTunes forum.

How to change the full host and domain name on OS X Leopard...

I recently bought an iMac, and I'm trying to configure it for my network. The question I have is, how can I change the host name and domain name from Skuld.local to skuld.tolharadys.net?
After mucking around with a few searches on Google, I've gotten the domain name to stick since running domainname returns tolharadys.net. Also I can change the hostname as reported by 'hostname' temporarily by running 'hostname skuld.tolharadys.net' in Terminal.app. However, this isn't persistent after reboots. Ideas are welcome.

You would need a DNS server on your network configured to answer authoritatively for that particular subdomain.

How to change the column names in display

Hi,
I want to change the columns names and give the display names as more User friendly..
How should I acheive this in WebI reports.
Regards,
BOB

Hi,
the columns names are normal text fields. Just selecdt to edit your report , go to the editor panel and select the column header you want to modify. You can enter the text you want to display
Regards,
Stratos

Is it advisable to change the hub name and or pass...

Similar Messages

Maybe you are looking for