Is it advisable to keep the mac connected to the plug as often as possible while using it? (to keep the battery at 100%)

Reading the advises on the battery (long) life it looks like the main parameter of interest for evaluating the battery performance are the cycle counts.
This also means there it is better to always keep the battery charged while using the mac in order to never let it discharge consuming cycles.
Is it really advisable? Aren't there some possible drawbacks in doing so?
(Risks due to higher temperature, risk of battery malfunctions..)
Thanks in advance.

Welcome to ASC!
In the ~15 years I've been lurking here, there seems to be one recurring theme to posts about battery failure: the statement "I don't understand why my battery died! I never use the computer on battery power!"
As OGELTHORPE points out, use the battery every so often. I try to get 1-2 cycles on mine per month. How you do it depends on your usage pattern. I use mine at a museum where I volunteer one a week and the battery has more than enough capacity to power my MBP through my shift.
Think of your battery in term of human muscles: if we do not exercise a muscle, it will atrophy and become disabled. So it is with your MBP battery.

Similar Messages

Just got an iMac. I am trying to use Migration Assistant. The Mac side seems to be doing it's job, but my PC just keeps "Waiting for the Mac to connect." For over an hour.

Just got an iMac. I am trying to use Migration Assistant. The Mac side seems to be doing it's job, but my PC just keeps "Waiting for the Mac to connect." For over an hour.

Probably a PC issue, you can try calling AppleCare, you are covered for 90 days from the date of purchase and can find the phone number in the owners manual. Also please look over:
http://drtyhnds.blogspot.com/2011/08/how-to-use-migration-assistant-from-pc.html
and
http://pondini.org/OSX/SetupLion.html
Thomas,
It would also be extremely helpful to those trying to help you if you complted your Profile so we at least know what iMac and version of OS X is installed. Click Your Stuff in the upper right then click Profile and complete the necessary fields including what part of the planet you're located.

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

Installed Mavericks on my Mac 2 days ago, and now every time I start up the Mac a box appears iTunesDroper, asking me to enter my password. I enter the password it is accepted and then keeps repeating the same until I click on cancel

Installed Mavericks on my Mac 2 days ago, and now every time I start up the Mac a box appears iTunesDroper, asking me to enter my password. I enter the password it is accepted and then keeps repeating the same until I click on cancel

Kernel panics are usually hardware.
Hold down 'd' key and it should boot into Apple Hardware Test, or insert your OEM install DVD to do so.
No, we are mere users and mortals and usually you need to do some troubleshooting by trial and error and testing. Schedule an appointment.
http://docs.info.apple.com/article.html?artnum=106227
http://www.macmaps.com/kernelpanic.html
http://www.thexlab.com/faqs/kernelpanics.html

Is it possible to use 2 displays with the mac mini

is it possible to use 2 displays with the mac mini

I wanted an extended desktop using 2 monitors.
I am using a Dell Ultrasharp ( has 1 VGA and 1 DVI-D) and a LG W2286 (has 2 HDMI, 1 DVI-D and 1 VGA)
I ran into a similar issue where initially the mac would not detect the 2 displays and I thought I would share my solution. I have a Mac Mini 10.8.2 i7 Late 2012.
I bought a "Cable Matters" brand Mini Display Port | Thunderbolt to DVI Male Cable to have dual monitors.
I am also using the included in the box HDMI to DVI-D Adapter from Apple.
Initial configuration was:
Mini-Display (Thunderbolt connector) to DVI connected to the LG DVI-D input.
Apple HDMI to DVI Dongle connected to the Dell DVI-D input.
What happened was that my desktop was on the LG clear as day but OSX did not see the dell monitor.
I called apple support and they could not figure out why the mini cant see the dell monitor. I think I discovered that the mac mini could not support 2 dvi monitors.
I switched the monitor connections.
The connections that works:
HDMI out to HDMI in on the LG using a standard HDMI cable.
Display port | Thunderport to DVI-D on the Dell's DVI-D in.

Hello, i am new to the mac and i need to learn how to re image using an external hard drive

Hello, i am new, like baby fresh new,...lol, to the mac and i need to learn how to re-image using an external hard drive.

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

This is possible to be connected to WiFi but not internet.
You connect to your modem/router via WiFi and whether it is connected to the internet or configured properly to route the internet to WiFi devices is a different story.
Now if you've already reset your WiFi (try disabling and enabling) and perhaps even restarting your MBP
Then make sure that your modem/router is connected to the internet.
You can try any other device, lights on the modem/router or use Eth cable to test.
Report back your findings.

I have a new macbook pro and an LG w2361v monitor. The max resolution the mac is allowing me to set is 1400x1050, why can't I get to the max resolution the monitor can accept (1900x1080)

I have a new macbook pro and an LG w2361v monitor. The max resolution the mac is allowing me to set is 1400x1050, why can't I get to the max resolution the monitor can accept (1900x1080)? I know that the monitor is able to accept this resolution but It can't seem to find it. Is it something to do with the new thunderbolt port? or the fact that I'm utilizing the VGA adaptor? I could go HDMI if that works better.

Use DVI or HDMI.
VGA runs out of steam after a while.

Can you download a app for the mac book for reading books off book self, can you download a app for the mac book for reading books off book self

can you download a app for the mac book for reading books off book self, can you download a app for the mac book for reading books off book self

Hi...
If you are referring to iBooks on iOS based devices, no, they cannot be read on the Mac OS X. Two different operating systems.

Is it possible to use an iMac as the display for a Mac mini?

Is it possible to use an iMac as the display for a Mac mini?

iMacs late 2009 or newer can be used in Target display
mode. Any older, no can do.
The only other way is via network Screen Sharing or
some otherVPN network like solution. The issue here
though is that video performance will be pretty severely
hampered.

Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

Broadly speaking I want some sort of network storage( wireless or through my existing wifi router) that I can access files for both my windows PC and Macbook and also to access files to my iPad/ iPhone. Some sort of backup and sychronisation so that I can access certain files remotely.
Buy a real NAS.. synology or QNAP are the standard... although companies like Netgear and Western Digital and Seagate make them as well.
There is no problem sharing between Mac and PC now.. you do not even need a NAS to do that.. you simply share the hard disk directly. Mac talk SMB.. everything talks SMB nowadays.. so it is easy.
ipad and iphone are not designed to use NAS.. they are designed to backup only to the cloud or itunes.. but you can load an app like file browser if you want.
http://www.stratospherix.com/products/filebrowser/
Remote access to the Apple TC is somewhere between difficult, to impossible from a PC.. Apple use BTMM and iCloud but the service is not offered to PC.
A real NAS will offer HTTPS or SFTP or several other methods.. that both Mac and PC can use.
You simply plug it into the current wireless router.. it is a network device and assessable over the network. It is not necessary to buy another router.. in fact that is a waste.

Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems.

Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems. Where can i download the ios5 from as my itunes is on my desktop which uses windows xp. Please help

Download iOS 5.1
iOS 5.1 (build 9B176) is compatible with iPad 1, iPad 2, iPhone 3GS, iPhone 4, iPhone 4S, iPod touch 3rd & 4th gen, and iPad 3. Additional builds are available for Apple TV 2 and Apple TV 3. The below download links are all direct downloads of iOS 5.1 from Apple.
iPad 1
iPad 2 Wi-Fi
iPad 2 GSM (AT&T)
iPad 2 CDMA (Verizon)
iPad 2,4
iPhone 3GS
iPhone 4 GSM (AT&T)
iPhone 4 CDMA (Verizon)
iPhone 4S
iPod touch 3G
iPod touch 4G
iPad 3 Wi-Fi
iPad 3 GSM
iPad 3 CDMA
Apple TV 2 (9B179b1)
Apple TV 3 (9B179b1)
Source: http://osxdaily.com/2012/03/07/ios-5-1-download/

I´ve downloaded the Cloud as a testversion but I´ve got Mac OSX 10.6.8. Is it possible to use it?

I´ve downloaded the Cloud as a testversion but I´ve got Mac OSX 10.6.8. Is it possible to use it?
Best Wishes Fredrik Moback

Hi ema466,
To take advantage of all the great features in the new Creative Cloud desktop apps, you should upgrade to a newer version of Mac OS X. Some of the new CC apps do not support v10.6 and will not install. Minimum system requirements for each Creative Cloud app can be found on the tech specs page on Adobe.com.
Note that if you are on Mac OS X v10.6, you will have to install products that are compatible with v10.6 via Adobe Application Manager.
Regards,
Romit Sinha

I bought the mac book pro retina with warranty in second hand now i need to update the keynotes, pages

I bought the mac book pro retina with warranty in second hand now i need to update the keynotes, pages and numbers now it not updating in my apple id is there any idea to transfer to my new apple id

You will have to erase the HDD and reinstall the original OSX. This will allow you to create your own Apple ID via the registration process. Follow these guidelines:
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/
Ciao.

My password on boot up i thought included an @ but it includes a ". When i try to change it once the Mac is on it says it's changed but on boot up it requires the latter again?

My password on boot up i thought included an @ but it includes a ". When i try to change it once the Mac is on, it says it's changed but on boot up it requires the latter again? I think this is because i changed the keyboard to British PC but why won't the change happen so that when i boot up it changes as when i go in to profiles and change my USER password it says it's an @ already but when i turn it on it needs me to put in the " ??? Using a bluetooth wireless Apple Keyboard

Hi Rob, see if this helps...
Reset Password 10.7, 10.8, 10.9?...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/
Then Reset your Keychain...
http://support.apple.com/kb/TS1544

Is it advisable to keep the mac connected to the plug as often as possible while using it? (to keep the battery at 100%)

Similar Messages

Maybe you are looking for