Is it all about timing or FSB ?

Hello
i was wandering if i should base my coclusions to rams based on agressive timing or high speed. I have 2xA-data ddr 500   but i am planning to buy some extra pairs for a friend. Should i get him a ram with aggressive timing like (2,2,2,5) ddr400 ones or ones with higher rated speed (ddr500). Any suggestions ? if so which brand please  thnx
PS. is it good to to 2xAdata dd500 with 2xsamsung ddr400 rams together and overclock my system.  
Neo2 platinum
p4 2.6C
vantec 400W
seagate sata 80gb
2x 256mb adata ddr500
ati 9800 pro sapphire

Hi!
There are many factors that memory depends on. But there are 2 important ones:
The chips themselves
The PCB
As far as the chips go, Samsung TCCD seem to be really good in terms of overclocability at low latencies.
The PCB should preferably be from Brainpower or a custom PCB, not the JEDEC official one. The Brainpower PCB can bring an increase in the memory speed up to 21MHZ (42DDR).
A lot of guys play with the new OCZ VX (Voltage extreme) series from OCZ. Some of my friends over at Xtreme Systems have them running at DDR500 CL2 2-2-5 with about 3.6V.
But what is this talk good for? Let me post some linkys for ya!
http://xtremesystems.org/forums/showindex.php?t=43659
http://www.madshrimps.be/?action=getarticle&articID=258

Similar Messages

  • Calendar Question: Why do all day untimed events switch to all day timed events???

    I've complained about this on other threads, but so far nobody has answer.  Can somebody please tell me why all day untimed events on the Pre sometimes switch to all day TIMED events (i.e., an event that starts at 12am and ends at 11:59pm)??  My guess is that this is yet another glitch with Google calendar sync, but I would like somebody to weigh in if they know how to fix it.  Thanks. 
    PS--I'm also still waiting for someone from Palm to address the daylight saving time glitch too, if anybody is out there.  Thx.
    Post relates to: Pre p100eww (Sprint)

    This is happening to me as well.  So far, I've noticed it only with repeating events, and not with all of them.  I started noticing the problem in late October, at the same time that I noticed some all-day repeating events being moved forward a day (see separate thread).  As of today (the 12th), I see a repeating yearly all-day event on the 14th that is changed to a 12:00-11:59 event; and a similar problem with an all-day event on the 20th that is supposed to repeat until the 22nd.  In that case, the event is showing only on the 20th and 21st, with the 22nd not showing the event.  In this same time period, there are many all-day events repeating yearly that are NOT showing any problems.
    At the moment all events seem to be showing up correctly in Google Calendar, which my Pre is syncing to. - Dan

  • I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.

    I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
    I saw this report being sent to Apple:
    Interval Since Last Panic Report:  581719 sec
    Panics Since Last Report:          10
    Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
    Fri Mar  7 13:00:14 2014
    panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
    RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
    RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
    R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
    R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
    RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS:  0x0000000000000008, SS:  0x0000000000000010
    Error code: 0x0000000000000000
    Backtrace (CPU 0), Frame : Return Address
    0xffffff805e5f3a00 : 0xffffff8000204d15
    0xffffff805e5f3b00 : 0xffffff80002d1208
    0xffffff805e5f3c50 :
    Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
    Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
    Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
    Serial ATA Device: OPTIARC DVD RW AD-5970H
    USB Device: FaceTime HD Camera (Built-in), 0x05ac  (Apple Inc.), 0x8509, 0xfa200000 / 3
    USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 5
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x821a, 0xfa113000 / 8
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0245, 0xfa120000 / 4
    USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd110000 / 3

    Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
    There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
    If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
    Run Rember first... call back with results.
    Good luck,
    Clinton

  • My rue la la app for ipad suddenly dosent work so I deleted it now when I try to reinstall it the app store says that it not available in the us. It is still on my Iphone and working properly. What is this all about?

    My rue la la app for ipad stopped working. I deleted the app and tried to reinstall it,  it is no longer available in the app store and when I research it on safari and find it when i try to install it says that it is not available in the us store. What is that all about?

    My app did the exact same thing. It is still unavailable on the App Store and when Rue La La's site directs you to download their app, the "not available in the U.S. message appears. This happened to me last night. The app wasn't working, I deleted it and was just going to reinstall but was unable to find the app. I figured it was some glitch but I have tried multiple times this afternoon to no avail.

  • HT1386 I synced (updated) my iphone to itunes and some songs were deleted from my iphone playlist on my phone.  On the computer, a circle is next to the song and the title faded out.  What the heck is that all about and how do I get my songs back onto my

    I synced (updated) my iphone to itunes and some songs were deleted from my iphone playlist on my phone.  On the computer, a circle is next to the song and the title faded out.  What the heck is that all about and how do I get my songs back onto my phone playlist?  Never happened before.  My software is up to date?

    http://support.apple.com/kb/HT2519

  • I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out.  But I can't find any information about "timing out" or how to correct the situation.  Any help?

    I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out.  But I can't find any information about "timing out" or how to correct the situation.  Any help?

    Disable your antivirus and firewall, and try again.

  • When I start up FCPX, the timeline and the clips don't highlight in yellow. I have to double-click to get them to highlight and it's in white. What's this all about?

    The system seems sluggish, as well. I can't find anything in help that describes what this is all about.

    Are you using the Select tool when trying to click on clips?  Might try hitting "A" on the keyboard just to be sure.
    ~D

  • I have read up on all about crashes and i cant even open it in safe mode :( i have tried deleting it and reinstalling it but the problem still persists. What would you suggest i do and is there any way i canget hold of firefox 6 for mac?

    i have read up on all about crashes and i cant even open it in safe mode :( i have tried deleting it and reinstalling it but the problem still persists. What would you suggest i do and is there any way i canget hold of firefox 6 for mac?

    Does the regular Firefox 8 release version work or does the version crash as well?
    *Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?

    Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?
    Picture below, many thanks for your help.
    Jason

    Back up all data before proceeding.
    Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
    Start up in safe mode to rebuild the font caches. Restart as usual and test.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.
    If you still have problems, then from the Font Book menu bar, select
              File ▹ Restore Standard Fonts...
    You'll be prompted to confirm, and then to enter your administrator login password.
    Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

  • Sync phone to computer and the process a significant amount of my contact list.  All "A"s, all but 2 B's, all but 4 c's then left everything else as is.  What's that all about and can I retrieve what was lost?

    sync iphone to computer and in the process a significant amount of my contact list was deleted.   All "A"s, all but 2 B's, all but 4 c's then left everything else as is.  What's that all about and can I retrieve what was lost?

    iTunes Store- Transferring purchases from iOS device or iPod to a computer
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    How to dowload purchased music

  • My Black Macbook froze using Safari.  I forced quit and restarted.  Before the chimes there was a single buzz, from below the keyboard.  What's that all about?

    My Black Macbook froze using Safari.  I forced quit and restarted.  Before the chime, there was a single buzz, from below the keyboard.  What's that all about?

    http://support.apple.com/kb/HT2341
    Might be RAM related if the above tip describes what happened.
    If not, and your data is not backed up, and it won't startup, read this tip:
    https://discussions.apple.com/docs/DOC-1689

  • My iPhone just said "SIM failure" and now says Invalid SIM in the upper corner. What's this all about?

    My iPhone just said "SIM failure" and now says Invalid SIM in the upper corner. What's this all about?  Any ideas on how to resolve this.

    Looks like the Sim card had a catastrophic failure. Burnout, short somethng like that.
    You can try to take out the tray and reseat the sim card inside and see if that gets it back.
    Also try resetting the phone at least once by holding down the home and power buttons until the Apple Logo shows up.
    If none of this works you'll have to contact your cell carrier to get a new sim card, as it probably fried and is no longer functional.

  • I am unable to update my incoming mail since 9/21/12  What's that all about?

    I can't update my new mail since 9/21/12 what's that all about?

    That's all about you and your mail provider. It has nothing to do with Apple, and certainly nothing to do with the people in this user-to-user forum. And based on the information you have provided thus far unless there happens to be a psychic monitoring the forum no one can help you.

  • HT3669 HP 2.16.1 downloading "updating" 3 times in 1 day? What's this all about?  I'm using latest OSX  on MBPro

    Hewlett Packard (HP) Printer Software Update ver. 2.16.1 has auto-installed/downloaded twice within the past few days and now, today, the App Store wants to download 2.16.1 HP Printer Software Update for a 3rd time!?! Same version all 3 times. What’s this all about? Is something acting up or is this normal? Really strange that it'd want 3 copies of 2.16.1....
    Please advise what I should do.
    I’m using latest Mavericks OSX (10.9.2) on Macbook Pro (mid-2012).
    Thank you,
    A
    Below is a screenshot in case I made no sense explaining the problem above.

    I don't know the cause and I haven't heard of that before, but
    I think you should try some generic maintenence:
    Startup from the Recovery Partition, and repair the hard drive and repair permissions with disk utility.
    http://support.apple.com/kb/ht4718
    (just read the first paragraph)

  • Confirming, indexing, creating peak file. What's this all about?

    Althought I'm new to PrPro (see my very first post, it was the that I just started using this app), premiere already ate me that anywhere I go, when it comes to video editing, I am in its belly. But still I want an explanation regarding (again) about this message that's appearing in the status bar: 'conforming ?????.mpg". I don't really understand what's this all about. A little explanation is a lot to me. But what I am concerning about this thing is, it seems to be endless. PrPro had done already on all of my assets, conforming, creating peak files, indexing, but it still keeps on doing it again and again. Is there a problem with my audio/video files?
    During the first time of my use, I didn't mind. I didn't even notice it. But now I started to be concerned with it since I my pc really slows down when PrPro starts this seemingly perpetual activity. If there's a problem somewhere else please help me.

    Did you notice that you make the same mistake as one of our regulars here, the_wine_snob, otherwise known as Bill Hunt, in leaving out one 'a' in my last name? I'm not offended but wonder if that is a human trait to not overdo it and two 'a'-s may be too much?
    I resemble that comment! Harm, you have to realize that I am from Mississippi, and everyone is known as Billy Bob, Joe Bob, or Bubba. We had no Harm Millaards - too many double vowels and consonants for us. At least this helped, when I signed up for a bunch of X-rated sites, as Harm Millard...
    OK, where were we? LameTiger (check that spelling, as I think I got it wrong again and apologize profusely), when one has non-standard footage, three thing need to happen: the files need to be indexed, the Audio must be Conformed (CFA files) and the Waveform Display (PEK) files must be created. Depending on the number of files, their Duration and one's computer's speed this can take from moments, to maybe 20 mins.
    If you have not just loaded up this Project, then gone for a cup of coffee, or tea, I urge you to do so. There is a tiny progress bar in the very lower-right of the GUI, that traces this. Let it happen, and be patient. I know that this sounds like a scene from the Karate Kid, but it's important. Many systems will crash, if one tried to do anything, before this process completes. I can work (albeit slowly), during the process. Many cannot.
    Now, if you HAVE patiently waited this process out, and it has completed, AND the next session yields the exact same thing, then something is not quite right. Could be files getting moved, deleted, or otherwise not available to PrPro, or some setting in one's Scratch Disks, or some other problem.
    Hope that a bit of patience, and a cup of Darjelling helps. Please let us know.
    Good luck,
    Hunt

Maybe you are looking for

  • Why is the c5180 not supported in the eprint/mob​ile print apps?

    HP C5180 All in one iOS for iPhone and iPad I used to be able to print to my printer when I had iPrint on my iPhone but I upgraded to the eprint app and now I can't print

  • Differences between 4.7 and 5

    Hi all,     can anybody tell me what all the differences between sap 4.7 and 5.0 ... Regards Sreedhar Rusuma

  • Path to become a DBA

    Hi buddies, I do have something crawling in my mind. Would like to know whats the path to become a DBA. I did my OCP around one year ago in Oracle 9i DBA track. Now working as a database executive, where my job task is to provide support for the clie

  • MRP Group, MRP controller

    hi  all.. when we are going for imlementation, how to deside how many MRP Group, MRP controller, production scheduller required? what are the factors should be consider for selecting those? is there any thumb rule for selection?.....

  • NI PXI-8175 not powering up

    Hi, This PXI-8175 in not powering up. We've checked with the facility power & it's okay & there is no issue with the supplu power. When we turn on th swith the SMPS inside the chasis is not powering up, suspecting may be the SMPS gone bad. I'd apprec