Is it available a function like trim

in abap?
I want to get the length of a chararcter field but not with blanks. I just want the characters?
Thank you.
Deniz.

Hi Deniz,
from SAP HELP.
Variant 4
SHIFT c LEFT DELETING LEADING c1.
Variant 5
SHIFT c RIGHT DELETING TRAILING c1.
Effect
(Variant 4/variant5). Shifts the contents of c to the left or right for as long as the string begins or ends with a character contained in c1.
If c does not begin or end with a character from c1, it remains unchanged.
Example
DATA: ALPHABET(15) VALUE ' ABCDEFGHIJ',
M1(4) VALUE 'ABCD',
M2(6) VALUE 'BJJCA '.
SHIFT ALPHABET LEFT DELETING LEADING M1.
The field ALPHABET remains unchanged.
SHIFT ALPHABET LEFT DELETING LEADING SPACE.
The field ALPHABET now has the following contents:
'ABCDEFGHIJ '.
SHIFT ALPHABET RIGHT DELETING TRAILING M2.
ALPHABET now has the following contents:
' ABCDEFGHI'.
Note
Performance:
For performance reasons, you should avoid using SHIFT in WHILE loops.
The runtime required to shift a field with length 10 by one character to the right or left requires about 5 msn (standardized microseconds). A cyclical shift requires around 7 msn. The runtime for the ... LEFT DELETING LEADING ... variant is around 3.5 msn, for ...RIGHT DELETING TRAILING... around 4.5 msn.
Regards,
Jayant.

Similar Messages

Any function like 'SEARCH', 'SEARCH NEXT' available in tree element?

As we know, the tree control in EnjoySAP Controls provides the functions 'Search' and 'Search Next'. Are these functions available in a tree UI element in WebDynpro?

Hi
According to my information i dont think functions like 'Search' and 'Search Next' are available for a tree UI element in WebDynpro.
If you want to check any value follow the below instructions:
1.      In the test script editor, open the command interface.
       2.      Expand the tree in the left side of the structure editor to display the relevant element.
       3.      From the context menu, choose Insert Check. The element is copied to the GETS_AND CHECKS node.
       4.      Under the GETS_AND CHECKS node, double-click the element to display it for editing in the right-hand pane.
       5.      Parameterize the CheckAction field and ExpectedValue field as required. Optionally, parameterize the Value field to perform a GET as well.
For further clarifications please go through the link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/84/ef2a41b108f523e10000000a155106/frameset.htm
Rergards
Elizabeth

Using financial functions like xirr,irr,npv

Hi Guys!,
I would like to make use of financial functions like xirr,irr,npv using oracle/forms/sql , is there any resource available in oracle product family, if no how can i use there functions using oracle products.
Thanks in advance
Uday

I'm unsure which Oracle product might include built-in financial functions -- perhaps one their Business Intelligence products? If your math and Java skills are up to the task, you might consider writing a JavaBean that contains your own implementations of the financial functions you require.
Eric Adamson
Lansing, Michigan

How to call operating system(windows) functions like sutdown,refresh,et

Hello,
I am new in Oracle D2k.I want to know that how to call windows XP/7 shell commands(operating system functions) or windows function key(like F5 for system refresh in windows xp/7) in an Oracle Form.
Actually I have to make a trigger which can fire at pressing a particular key and execute appropriate action of Windows7 like shutdown,F5(function key of windows to system refresh).
thank you
regards
aaditya.

Just for future reference, regardless if you are posting in the Forms area of the forum or any other, terms like Forms 11g, Oracle 11g, etc are parts of product names. They are not version numbers although they do offer a slight hint. It is very important that when posting you include the complete version number of any products related to the problem or question you have. For example, you said you are using Oracle Forms 11g. Look at how many possible versions "Forms 11g" could possibly be:
11.1.1.1
11.1.1.2
11.1.1.3
11.1.1.4
11.1.1.6
11.1.2.0
11.1.2.1
With each new patch release and major release, a large number of bug fixes are included. In the case of new major releases, in addition to bug fixes, many new features are added. So knowing the version number is important.
Beyond that, it would appear that you have many questions:
1. How to copy and paste
2. How to execute a system shutdown
3. How to force the browser into full screen mode
4. Refresh - this one is unclear. What do you mean by "refresh"?
Let me answer those that I can:
<blockquote>o Functions like cut/copy/paste are available directly from your Forms code. For these I would recommend referring to the Builder's Online Help. Look for CUT_REGION, COPY_REGION, PASTE_REGION. It might also be helpful to understand SELECT_ALL. For example you may want to code a Copy button like this:
GO_ITEM('some_text_field);
SELECT_ALL;
COPY_REGION;o To execute a system shutdown on the client machine, you would first need to WebUtil enable your form. Refer to the Forms Builder Online Help for information about how to use WebUtil. You can also find lots of information in this forum about WebUtil. Once enabled, you can execute a Windows shutdown in various ways. Here one option:
Declare
     my_cmd varchar2(255);
Begin
     my_cmd := 'cmd /c start "" "' || '"shutdown -s -f -t 1"' || '"';
     WEBUTIL_HOST.HOST (my_cmd);
End;Refer to the Microsoft documentation for more information: http://technet.microsoft.com/en-us/library/bb491003.aspx
o I'm not sure what you are attempting to do with the F11. I understand that this function key sets the browser to full screen, but the form will not exactly adjust for this change in browser size. You can adjust the applet size dynamically, but not the form. For that you would need to code the behavior yourself. So, before I can offer something specific, it would be helpful to understand what you expectation is and if what you want is to set the browser to full screen, why not just allow the end user to do it? You could easily have a java script popup displayed before the form starts which might say something like "To maximize your browser, press F11"
o Finally, "refresh". I don't know what you mean here. Refresh what? The Windows desktop, browser, Oracle Forms.....
</blockquote>

Can I update my iPod video1 with search function like iPod video2?

Can I update my iPod video1 with search function like iPod video2?
how could I do?
I have already download and installed iTunes 7.0.2
thx

The Search feature is currently only available on iPods which shipped with it; no publicly available download will add it to older iPods.
(19614)

How do I watch my iTunes movies, tv shows on my mac without having to download them all to my HD? I really want my Mac to function like my Apple TV since I have just moved and don't have my TV for another few weeks. Help please?

How do I watch my iTunes movies, tv shows on my mac without having to download them all to my HD? I really want my Mac to function like my Apple TV since I have just moved and don't have my TV for another few weeks. Since I purchased my three Apple TV. I have had no need to download any of my movies to my Mac. Which has been great. However, I remember that I used to now have to do this... or did I? I am just frustrated because I want to stream all this stuff vice haveing to waiting for it all to download fill up my Mac's HD and then just delete. Someone help please?

Play the movie in iTunes to stream it.
Click the cloud icon to download it.

What are the different types of parameters available in function builder an

What are the different types of parameters available in function builder and where do we use them.

The different type of parameters available in FM are
Import - They are used to pass the values to the function module.
Export- They are used by FM to pass the result back to the calling program.
Changing - The variables are passed to the FM and can be changed during the FM processing.
Tables - Internal tables can be passed to the FM (it works similar to changing parameter).

How to use an external start button for 6024E w/ sc-2345, I would like it to function like a start button in LabView but I don't know how to connect the external button to the sc-2345's connector block

I am confused as to how to connect my external start botton. I would like it to function like a start button on a front panel of a VI. I would like to use the +5V on pin 14 but I really don't know where to go from here. Any guidence for a novice would be most appreciated.

phod,
This is the LabVIEW Real-Time forum, so I suggest that in the future that you post this type of question to the Multifunction DAQ forum.
For the simplest solution you will have to connect your button to a digital line of your board, consult the sc-2345 user manual for a diagram of where these lines are exposed. You will have to connect your start button in series with a line that is high, such as your 5V pin or another digital line. Then connect this to a digital line that will be your start trigger.
Your program can poll the digital line that is connected to your button in a while loop and when it goes high, it lets the rest of the program execute. For the programming, I suggest you take a look at the shipping examples that come with LabVIEW. If yo
u have LabVIEW 7.0 go to Help>>Find Examples. Open Hardware Input Output>>Traditional DAQ>>Digital Input and Output>>E Series for some examples of digital I/O programming with E-series boards.
Hope that gets you started.
Gerardo

Left outer join functions like simple join

I created two views SCO_REQGROSSLINES_V & SCO_REQLINESCOMPLETE on Oracle requisitions base tables. Our business rules enforce the following identity: the number of gross requisition lines will always be greater than or equal to the number of requisition lines complete. (By complete I mean delivered.)
Each view has a key named DATESUBINV_KEY constructed of a transaction date and the subinventory code using this logic:
, TO_CHAR(TRUNC(transaction_date),'YYYYMMDD') || subinventory_code
On 03-SEP-2010 a user created a requisition with one line item for material from the HEAT subinventory which was not delivered. This row is retuned in the result set when I query on SCO_REQGROSSLINES_V but is NOT returned when I query on SCO_REQLINESCOMPLETE. So far so good.
When I issue either of the the following left outer joins I do not get the row for the row for the HEAT subinventory on 03-SEP-2010:
select rgl.trxn_date
, rgl.subinventory
, rgl.line_count gross_line_count
, rgl.ext_prc gross_value
, rlc.line_count lines_filled
, rlc.ext_prc lines_filled_value
from SCO_REQGROSSLINES_V rgl left outer join sco_reqlinescomplete_v rlc
ON rgl.datesubinv_key = rlc.datesubinv_key
where rgl.TRXN_DATE BETWEEN to_date('29-AUG-2010') AND to_date('04-SEP-2010')
and rlc.trxn_date BETWEEN to_date('29-AUG-2010') AND to_date('04-SEP-2010')
order by rgl.trxn_date, rgl.subinventory
select rgl.trxn_date, rgl.subinventory
, rgl.line_count gross_line_count
, rgl.ext_prc gross_value
, rlc.line_count lines_filled
, rlc.ext_prc lines_filled_value
from SCO_REQGROSSLINES_V rgl
, sco_reqlinescomplete_v rlc
where rgl.TRXN_DATE BETWEEN to_date('29-AUG-2010') AND to_date('04-SEP-2010')
and rlc.trxn_date BETWEEN to_date('29-AUG-2010') AND to_date('04-SEP-2010')
AND rgl.datesubinv_key = rlc.datesubinv_key(+)
order by rgl.trxn_date, rgl.subinventory
Question: Why would the left outer joins function as a simple join on DATESUBINV_KEY? Do keys on views function differently than keys defined in the data dictionary? If they do how can I make these keys to function like data dictionary keys?

Hi,
The WHERE clause is applied after the outer join is completed. In your example, rows from rgl will be in the result set even if they have no match in rlc. In those cases, all the columns from rlc will be NULL.
Okay, so you have these rows that contain data from rgl but NULLs where the data from rlc was supposed to go. Now it's time to start the WHERE clause. You then apply conditions like this in the WHERE clause:
AND     rlc.trxn_date BETWEEN ...NULL is between anything, so the row that the outer join prodeuced is rejected.
All conditions involivn columns from rlc probably need to be part of the join condition, not the WHERE clause.
For example, in you first query the FROM and WHERE clauses might be:
FROM          sco_reqgrosslines_v      rgl
LEFT OUTER JOIN sco_reqlinescomplete_v rlc ON    rgl.datesubinv_key   = rlc.datesubinv_key
                                        AND   rlc.trxn_date       BETWEEN TO_DATE ( '29-AUG-2010'
                                                                    , 'DD-MON-YYYY'
                                              AND       TO_DATE ( '04-SEP-2010'
                                                          , 'DD-MON-YYYY'
WHERE   rgl.trxn_date     BETWEEN TO_DATE ( '29-AUG-2010'
                         , 'DD-MON-YYYY'
               AND     TO_DATE ( '04-SEP-2010'
                         , 'DD-MON-YYYY'
                         )Always use (at least) two arguments when calling TO_DATE.
Conditions that only involve rgl can be in the WHERE clause, but if any conditions from rlc are in the WHERE clause, then the effect will be the same as an inner join.
There no difference between tables and views (or sub-queries) in this regard: the same thing would happen regardless of whether rgl and rlc were really tables or not.

Does oracle have similar functionality like MsSql "for xml path('')"

Does oracle have similar build in functionality like MsSql “for xml path(‘’)” , or in another word, it can enforce the result set(multiple rows) into ONE line such kind of presentation way.
Thanks in advance. Any help would be greatly appreciated.

Here I would like specify my question mnore clearly,
CREATE TABLE t(
line NUMBER(3),
site VARCHAR2(4),
phase VARCHAR2(5),
test VARCHAR2(25));
INSERT INTO t VALUES (1, '0100', '*','1111111111111111111111111' );
INSERT INTO t VALUES (2, '0100', '=','2222222222222222222222222' );
INSERT INTO t VALUES (3, '0100', '=','3333333333333333333333333' );
INSERT INTO t VALUES (4, '0100', '*','4444444444444444444444444' );
INSERT INTO t VALUES (5, '0100', '=','5555555555555555555555555' );
INSERT INTO t VALUES (6, '0200', '*','6666666666666666666666666' );
Here I want to retrieve the 'line' column information in ONE line way
select line from t I want the result is like '1,2,3,4,5,6'
Any generous help would be greatly appreciated!!!

[SOLVED]:Is it possible to use functions like decode in 'setWhereClause()'?

Hello,
My requirement is that I have 2 poplists - Country and States.
When I select a country,the corresponding states of that country should get populated in the states poplist.
The approach I took is that :
I selected firePartialAction as ActionType in Country poplist. Then I called a function to VOImpl of StatesVO and set the where clause there.
Now I was thinking about using decode as there is no direct connection between the CountryVO and StatesVO.
Is it possible to use functions like decode in 'setWhereClause()'?
For Example:
setWhereClause("DECODE(LOOKUP_TYPE,'XXC_IND_STATES','IND','XXC_US_STATES','US') = :1");
setWhereClauseParam(0,Country);
executeQuery();
When I tried running the page,no error was given but when the country poplist was changed - there is no change in states poplist.
If its not possible to use decode in setWhereClause(), could you please guide me as to how I can write a query to retrieve a value from a table and store it in a variable 'A'- so that I can pass that variable 'A' in setWhereClauseParam function .
Message was edited by:
Anju Susan

That kewl, but for u knowledge u can add anything in ur where clause of query through ur code in Voimpl class. It is even possible to do change entire query, see Voimpl class methods in javadoc.
--Mukul

Is there any function like malloc and free in labview?

Im writing a vi that will handle my memory request.
Im doing a very high speed video record sessions , and the frames cant be saves on hardisk in realtime), so im saving the frames on memory, and i want to use memory as
much as i can(~2GB) and to save the maximum frames that i can save (and it depends on bit depth, height, width, total memory).
VI Operations={
Allocate Memory (frame width, frame height,TotalMemorySize) ,
Add Frame(index) ,
Get Frame (index),
Free Memory
In each record session, there will be a different FrameWidth and Height, so the maximum frame that i can save in memory may be different and equal to
IndexMax=TotalMemorySize/(FrameWidth*FrameHeight)
Im doing this by allocating a 3D array [FrameIndex , row , column]
The fact that the width and height change in different sessions indicate that i need an ability to free the previous allocated 3D array memory and allocate a new one.
(lets say that i have 2GB total memory..)

This request really takes the system and the programmer to the limits....
First of all:
LabVIEW does not have any functions like malloc and free. LV wants to prevent the user to have to think about stuff like this. On the other hand, the memory management in LV is therefore hard to do or even impossible, at least to such an extend as you request.
Some thoughts about your application:
1. If you want to have about 2GB of framedata in RAM during runtime, you will need the large memory awareness active. Otherwise, a 32 bit OS will give you "out of memory" messages. Refer to the LV help "VI memory usage".
2. Storing the data in an array could be a difficult task. Arrays have to be in memory without any gap. Therefore, you'd encounter "out of memory" messages even if your RAM totals enough free memory (theoretical).
3. The idea of linked-lists does not compy in LV since you cannot store pointers to structs (since those are abstracted from the user).
4. Maybe you should take a look into vision.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How to implement a back functionally like the back of the browser

Hi, I have a commandImageLink("go back") in a template jspx. How to implement the back functionally like the back of the browser with a managed bean method??. For know I m not using task flows.

I think you can use a javascript method to go back to the previous browser page.
http://javascript.about.com/library/blback.htm
http://www.pageresource.com/jscript/jhist.htm
http://www.w3schools.com/jsref/met_his_back.asp
Perhaps you find something useful and related to backing beans here:
http://adfdevelopers.blogspot.com/2009/04/some-handy-code-for-backing-beans-adf.html
NA
http://nickaiva.blogspot.com

Is possible in a dialog screen attach a field functional like select-option

hi,
Is it possible - in a dialog screen - to attach a field that has functionality like Select-options fields?
And if so - how?
and information about complex_selections_dialog

Hi,
Look at the below links
module pool programming " to add selection-option on screen"
module pool programming " to add selection-option on screen"
Regards
Sudheer

How to call C++ function like this...

hi!everyone!
i have a C++ function like this:
java_call_c::test()
how do i write codes in java in order to call the function ???
thanksa lot !!!

Actually there is no way to write C code with C++ functions (as well as you can't call Pascal functions).
But you can create function in C style to call C++ function.
void test( )
java_call_c c = new java_call_c( );
c->test( );
delete c;
}:)

Is it available a function like trim

Similar Messages

Maybe you are looking for