Is it because i dropped it?

ok so i dropped my 4th gen 64G iPod touch from a really high place. it didnt turn on for a while but when i tried again, it showed the USB cable with an arrow pointing to iTunes. so i connect my ipod to iTunes on my computer but it said itunes detected my ipod in recovery mode and that i must restore it before it can be used with iTunes. i clicked restore and it said "the ipod software update server could not be contacted". i tried so many times and it kept saying the same thing...

ok so i tried restoring my ipod but it showed an error saying something like device could not be found. i notice how it refers my ipod as "iPod" which is not the name i named it before?

Similar Messages

Repeated aborted captures because of dropped frames

It seems that since I use a CANON mini-DV camcorder, my Apple Software requires that I capture directly to the internal drive, instead of onto the external G-RAID (which I purchased from the Apple Store with the express purpose of capturing video from my Canon ZR500!).
Now onto the next problem (It seems I am to battle this software at every step in the process, right? It never does "Just Work", does it?):
After two aborted attempts to capture a 60 MN tape onto my internal hard drive, what do I do about dropping frames. Is this because of "Bottlenecking", something I heard happens and is exactly why we DON'T want to capture onto the computer's internal drive? How do I capture a tape onto my internal drive without repeated aborted captures because of dropped frames?
It's going on day two with this software, and not a single frame of tape has been imported successfully yet. . .

Go to User Preferences > General. Uncheck "Abort on dropped frames" and "Report Dropped Frames." I have found that the dropped frames are unnoticeable while editing and during playback.

My ipod touch wouldn't turn on because I dropped it, so I plugged it into the computer. It went into recovery mode and is now stuck on a waiting for ipod screen. The ipod shows the apple logo and an empty loading bar.

My ipod touch wouln't turn on because I dropped it, so I plugged it into the computer. It went into recovery mode and is now stuck on a waiting for ipod screen. The ipod shows the apple logo and and an empty loading bar. Please help. Thank you.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Unable to capture files into external hard disk because of 'drop frames '

I haven't been able to capture footage from my DV camcoder thru firewire to an external hard disk in FCP because i get a message saying 'drop frames were detected'.
This happens when i selected this external hard drive as the scratch disk in FCP.
When i deslect it and select my user hard disk as the scratch disk, the capturing works perfectly. But i just want to capture all my capture files into the external hard disk, not my user hard disk.
The external hard disk's speed is 3500 - could that be the problem? Is it too slow? Its connected thru USB and it is Mac Os Extended Journaled. Its got 250gb of space, so that's not the issue.
Can anybody help me?
Thank you.

No, its a Panasonic gs180, a really good camera.
The camera itself is connected to my computer through firewire. Its the hard disk enclosure that is connected to my emac through USB. Anyway, i'm sure that's not the problem, casue like i said, the capturing works fine when i use my user hard disk as the FCP scratch disk.
The problem i have is when i try to capture footage from my camera to the external hard disk enclosure. When i press 'capture now' and press play, the playback stutters and a messsage appears saying, "drop frames detected" and the capturing stops.
I feel like i need to adjust something in FCP itself - like a preference or something - just not sure what.
Thnx for your suggestion though and if you know what i should do, please let me know.

I can only go back one page at a time because the drop-down jump back multiple pages feature is missing; how do I get this feature back?

On Firefox 3.6 the back and forward buttons also had a drop-down menu to enable me to jump back to one of the last, say, 10 pages I had viewed rather than only go back one at a time. Also, the reload button appears to be missing and I can't figure out how to bring these back. Otherwise, an awesome upgrade; thanks for all your hard work on this fantastic product.

You can right-click either Back or Forward button to open the tab history list.

Hey, I'm wondering if Apple will fix my iPod ( 4th gen ) because I dropped it two times and the screen cracked very very badly. Can Apple Fix it?

PLEASE HELP ME!!!

Apple will exchange your iPod for a refurbished for this price:
Apple - Support - iPod - Repair pricing
A third-party place like the following may be less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

My phone every night keeps playing songs and stops by itself and Siri also keeps coming on without me even touching it everytime I watch a video. I don't know if my phone is hunted or because I just dropped it too many times. What should I do?

So everytime I watch a movie or listen to music when I use my earphones. A song keeps playing by itself and Siri activates by itself without me even touching it. So I deactivated Siri. And now it's the voice control that keeps coming on. I don't know if my phone is haunted, or there's something wrong with my earphones/earphone socket/jack (or whatever you call where you put it in the earphones), or is it just because I dropped my phone too many times. And I don't want to reset my phone if that's what I have to do. By the way I have an iPhone 4s

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

Vendor Drop Ship Sales Order statues Issues

Process flow : OR ( item category ZVDS u2018Vendor Drop Ship" ) >> PO >> MIGO >> Invoice ( its order related billing ) no delivery involved in this because of drop ship
after sales order OR system generate PR and PO and if customer reject the PO so user put line item as mark for deletion in PO we cant delete PO and its tie up with Sales order and Over all statues at header lever is OPEN u2026is there any way where we can change over overall statues in sales order
We have an significant amount of these orders that continue to appear in numerous reports when they should not be of selected criteria,
But the main issue being when these orders are cancelled, returned, etc. They are not removed from VF04 "Billing Due list".

Pls reply me

My new iPad had a defect, but I just dropped it and there's a crack on the screen. What to do?

Okay so I pre ordered the new iPad in white with 4G and it arrived on the 19th. It looked fine, but I've been having issues with the home button. Also, it frequently turns off by itself when I'm in the middle of doing something. I'm having trouble with syncing my apps onto it too, but I don't know if that's because of a problem with the device.
I haven't had time to go to the store (it's pretty far) to get it looked at this week, so today morning I made an appointment for this Wednesday. Not long after, which is just a few minutes ago, I was at my desk and had my iPad on my lap. When I reached over to get something, it slid off and dropped to the floor. I would have completely gone insane at the fact that it fell, but I wasn't worried at all because the drop was only a couple inches higher than a foot from the floor. Also, when I picked it up the screen was face up. I immediately investigated the back for any scratches just in case, but not a single mark. I was so relieved but right when I flip it back over I see several cracks on the upper right corner of it (it's white so the cracks aren't clearly visible at some angles). I'm so surprised that it didn't survive the short fall.
I am aware that Apple's limited warranty doesn't cover accidental damage... I was planning on getting Apple Care when I went to the store on Wednesday.
From previous experiences, I am almost positive that the defect before this incident would have been covered by the limited warranty..
But I'm assuming I'll have to pay for a replacement... but this is so upsetting because I've been waiting five months for this third generation to be released and all this happens before a week of being an iPad owner :/
I was wondering if there are any chances of me getting this replaced without having to pay what I originally didn't have to ?
Honestly, if I was a worker, I wouldn't believe this situation myself.

You're right, it would have been covered under warranty. But because of the user damage, chances are there's a 200-something dollar fee . If you explain to them that it had a defect previously, they might replace it for you at no charge. **MIGHT**. But they would have to believe that it had a defect previously.

Update Drop Down based on selection in Option group

Good afternoon all-
I've got an option box ('PanelStatus') with two options: "Panel" (value of 1) and "Non-Panel" (value of 2).
On the form where this is located, I have a drop down box filled with names. These people on this table are either Panel or Non-Panel. So, my idea is that the drop down with names will be refreshed when the radio buttons in PanelStatus are clicked.
I've got a query that will return the right results, based on what's selected in the Option Group. However, when I set the Option Group after update event to refresh the dropdown box, Access is telling me "Object doesn't support this property
or method".
Any ideas/help are welcome!
EDIT: I'm thinking it may be because the drop down is unbound...? Does that explain why this is not working? If so, any ideas how to do this with the drop down remaining unbound?

The After Update event of an option group works whether the option group is bound or unbound.
You should use the Requery method of the combo box.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Impossible to make phone calls... drop drop drop...

By now it's impossible to make phone calls because they drop every single time after about 3 seconds. My phone goes completely dead from the other side, they tell me. I love this phone for everything else, but shouldn't at least the phone function work?
My wife want me to return it and get a "good" phone...

Have you checked for the proximity sensor issue? i.e., is the screen turning back on after you put the phone up to your head and you're possibly hanging up the phone by pressing the screen with your cheek? Not saying this is your problem but definitely worth checking as it's a well known issue with the iPhone 4 and is widely expected to be fixed with firmware 4.1 coming soon. (I hope!)
Easiest way to test it is to simply use the phone in speakerphone mode. If the call stays live then you've found your problem. Also, do you have a case on the phone to deal with the well documented antenna issue? That will kill a call as well if you're using a bare phone and touching the metal edges with your fingers.
I replaced my 3GS with a 4 and rest assured, if you have a case on it, the signal and call quality is fine. I know for a fact that my new iPhone 4 is working better at holding voice calls than my 3GS in areas where my 3GS was known to have signal problems. I have a case on my phone and I do have the proximity sensor issue but I watch for that so otherwise, I'm very happy with the phone.
If none of the above is an issue then you may simply have a defective phone and you should return it for a new one. Cheers!
James

None of the drop down menus work they r highlighted gray so I can't access them got the latest updates running lion. 10.7.2 all software is up to date

Just updated everything but when I open iTunes all my drop down menus are gray and I can't selecte them. To close out iTunes I have to use command option esc and force quit because all drop down menus and shaded gray and I can't access them

1 - the sudden disappearance of my 22 mailboxes, used to sort the emails that I need to file for future use
That was most likely the result of some kind of corruption, as I've already said, not a bug in Mail. Have you repaired the hard drive with Disk Utility recently? That wouldn't be a bad idea.
2 - at random times, mail (or the server) says that my password is incorrect and I must reenter (fix: usually I can quit mail, restart, and the connection is restored without reentering my password)
This is a known issue, where a failure to respond promptly on the server's end mimics what happens when the password is rejected. There's no need to quit Mail, just cancel when asked to enter the password, take the account back online and try again.
3 - mail seems to resort the mail in my mailboxes at random time. Several times a day, I must reset the sort to (a) by date; (b) by desending
Never seen that before. That points more to some kind of possible corruption in your Mail data or preference files.

How to Locate Drop Down Menu for Adding Password to Website

When I add my password information to a new website after site accepts the same, all is well. However, on frequent occasions I have wanted to change the password manually, or, perhaps there was some delay or flub and the finished password does not get saved for easy access to the website because the drop down or pop-up box asking if I want to save the password is gone too soon, and I don't know where it is situated in order to navigate to it to make changes manually.
I hope I have not confused this issue for reads here, as I don't actually know what the function is called other than to phonetically call it the save and remember password function. Thanks in advance.
Microsoft Windows 7 Ultimate OS, Mozilla Firefox 26.0, X86 Based PC
Shockwave Flash 12.0 r0
5.1.20913.0
Coupons, Inc. Coupon Printer Plugin
The plug-in allows you to open and edit files using Microsoft Office applications
Office Authorization plug-in for NPAPI browsers

Excellent links. Will peruse and advise if absolute answer found. Much appreciated.

Drop shadows absent from preview in IE 9

I just installed version 4.0 and previewed my entire site in IE 9 after the Muse file was converted. All of the drop shadows on images have vanished from the preview in IE 9. They are present when I view the site in Muse. I've tried choosing None in the Graphic Styles panel, then re-selecting my standard drop shadow. The drop shadow reappears in Muse, as expected, but is still absent from the preview of the page in IE 9. Anyone found a solution?

HI Dave,
Thanks for your informative email. I just tried adding a 1 pixel 50-percent gray stroke (which I assume is what you mean by border) to an image on my site that also has my standard drop shadow. The drop shadow still doesn't appear in the preview in IE 10 (I just upgraded from IE 9). It doesn't matter if I align the stroke inside or outside. The fill of the image frame was still set to transparent. I also tried changing the fill of the image frame to white, but the drop shadow still didn't export. (It's certainly true I can add the drop shadow manually, not using a graphic style, and have it appear in the preview.) So it appears that the workaround you suggest for using a graphic style isn't working on my system, at least not in IE 10.
Here's a broader and more important question: once the bug in Muse 4.0 has been fixed, will it be safe to use drop shadows on my images, or will IE 8 and earlier fail to display the images properly because the drop shadow will "bleed through" the foreground image, which should be opaque? If I have to choose, I would rather delete the drop shadow and have the images display properly in a wider variety of browsers, than use the drop shadow but risk having IE 8 and earlier users be unable to view the images properly. Will the newest version of Muse (once the bug is fixed) display drop shadows correctly in IE 9 and later, and not attempt to display them in IE 8 and earlier? Does the exported Muse file query the user's computer to see which browser is being used and adjust the display accordingly?

Dropping users and their objects

Is it possible to drop users and their objects (default tablespaces, stored procedures, etc.) ?

... because it drops what they own, and they don't own the default_tablespace, it might be used by lots of people.

Is it because i dropped it?

Similar Messages

Maybe you are looking for