Is it best to turn off your computer or put it in sleep mode.

Is it best to turn off your computer or put it in sleep mode.
I have a MAC Book Pro
2.4 GHz Intel Core 2 Duo

Well. Apple recommends to put the Mac into sleep mode if you are going to use your Mac after a short period of time, and they only recommend to turn it off when you are not going to use the computer for several days.
In sleep mode, your Mac consumes only a small battery capacity, so it's worth to put it in sleep mode. Also, it's much faster than turning the computer on every time you want to use the Mac

Similar Messages

  • Stuck in an update loop, 3 of 3, do not turn off your computer

    Hello,
    We have all the updates ,update automatically.  During this last one, today, our server has shut down and is in a constant loop.  We are getting that the drives are both fine, but there is one error on the start up that has me concerned:
    BMC System Error {SEL} Full
    The system goes through "Configuring updates" Stage 3 0f 3, do not shut down, then on to a blank screen, then restarts on its own, goes through the whole start up, everything looks good except for that BMC error, than the microsoft is loading...and
    right back into "Configuring updates", blank screen - its been on a continuous loop for about a half hour now.
    Suggestions?  The computer does not stay on long enough to do anything, and it never actually gets to a start menu..
    Thanks,
    Kelly Campbell

    Hi,
    Before going further, would you please let me know the version of operation system that you use?
    Meanwhile, please refer to resolution steps in the following KB. Then check if can troubleshoot and solve your issue.
    "Failure configuring Windows updates. Reverting changes. Do not turn off your computer" error when you try to install Windows updates
    http://support.microsoft.com/kb/949358/en-us
    Regarding to the error message, should the complete information of this error be “02A2: BMC System Error Log (SEL) Full.”? If so, please refer to the following article
    and check if can solve this error.
    02A2: BMC System Error Log (SEL) Full.
    http://clintboessen.blogspot.in/2013/05/02a2-bmc-system-error-log-sel-full.html
    If I misunderstand, please don’t hesitate to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Turning off your computer when iPod touch is connected

    Whenever I sleep or turn off my computer while my iPod is asleep the iPod turns on. I don't know why but it just does.

    What is happening is no different than when you unplug your iPod from the computer - you wake it up.
    BTW, do not leave your iPod plugged into your computer when it is in sleep mode or turned off. You can drain the iPod's battery. The only exception might be if you left it plugged into a powered hub.

  • What does a Blinking Earth in a box mean when you turn off your computer.

    We had a power outage and when the power come back on I turned the computer on to get on. What came up was a blinking planet earth in a box on a grey screen. After 10 minutes the computer came on. What does this mean? Anyone know?

    Hello! It means it has lost its way and needs guidance.It's looking for a network drive to startup from and there are none on your system. Open the system prefs and go to the startup disk pane. Then select your normal disk and all should be well. Tom

  • After logging off I get the message Firefox is still running please disconnect or turn off your computer

    When I logg off firefox I cannot logg on until waiting for a couple of minutes.
    this is the message I receive....Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.
    I have noticed this problem with other computers being used by other people. Also I cannot open several windows at a time, I always loose rhe original window or web site.

    If you try to immediately open Firefox after closing it, you may get this message. I does take a few seconds to completely close.
    Sounds like it is hanging when you exit and later try to restart Firefox.
    * How to stop the running Firefox process
    ** In Task Manager, does firefox.exe show in the '''<u>Processes</u>''' tab?
    ** See: http://kb.mozillazine.org/Kill_application
    **Windows 7 users: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
    * What may cause Firefox to hang at exit
    ** http://support.mozilla.com/en-US/kb/Firefox+hangs
    ** http://kb.mozillazine.org/Firefox_hangs
    ** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
    * You may need to try Firefox Safe Mode
    ** You may need to use '''Safe Mode''' to locate the problem:
    ***See:
    ****https://support.mozilla.com/en-US/kb/Safe%20Mode
    ****http://kb.mozillazine.org/Safe_Mode
    ***Firefox 4 & 5 users, hold the Shift key while clicking the Firefox 4 desktop icon to enter Safe Mode or, when Firefox 4 or 5 is open you can use the menu item Help > Restart with Add-ons Disabled (Firefox immediately shuts down and then restarts)
    ***Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox.
    ****In Firefox 4 & 5, Safe Mode also disables Plugins and Hardware Acceleration.
    ****If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''<u>before</u>''' starting Safe Mode (In Firefox 4, Tools > Add-ons > Appearance). See: http://support.mozilla.com/en-US/kb/Using%20themes%20with%20Firefox#w_managing-themes-and-personas
    ****When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode".
    ****Test to see if the problem you are experiencing is corrected.
    *** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it
    ***#by enabling '''<u>one at a time</u>''' until the problem reappears.
    ***#You can also enable a few at a time (3-5) or half of them, if you wish, keeping track of what you just disabled/re-enabled to see if the problem re-occurs; this will help narrow down the possibilities if you have a large number of add-ons.
    ***#'''<u>You MUST close and restart Firefox after EACH change</u>''' via File > Restart Firefox (on Mac: Firefox > Quit).
    ***#You can use "Disable all add-ons" on the Safe Mode start window.
    **See the following for more information
    *** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
    *** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
    *** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting

  • HT204406 Although I have subscribed to ITunes Match my ipad setting only states under Settings Music, to subscribe to iTunes Match. But i have subscribed. i have played the downloaded songs from the icloud, too, and when i turn off my computer, the ipad m

    I subscribed to Music Match with iTunes and yet my ipad settings for Music only still has the option to subscribe, and therefore I cannot click on an option to Activagte iTunes Match, since it is not there. I have all the right number of songs from the icloud showing up in my ipad now, and I have played a few, but when I tried to turn off the computer, it showed a field stating that my ipad music would stop playing too, and it did. I thought this might have something to do with homesharing, but this I thought was something separate from iCloud.
    There is something wrong, but I don't understand what. It has just synced, but the problem persists.

    Home sharing is separate from iTunes Match.  Sounds like you were playing music using home sharing, which turned off when you turned off your computer.
    Open iTunes on your computer and go to the Store menu.  Confirm that there is a setting called Turn Off iTunes Match.  That will confirm that iTunes Match is enabled on your computer.  Then check to see what Apple ID you subscribed to iTunes Match with.  It will be the ID in Store>View Account (in parentheses).
    On your iPad, confirm that you are signed in with this same ID in Settings>iTunes & App Store (at the top).  If so, you should see an iTunes Match setting listed with an on/off slider.  Slide it on to enable iTunes Match on your iPad.

  • GT70 BSOD or Stuck after Windows puts it to sleep mode of turns off monitor

    Hi Everyone!
    i have an  issue (or 2) with my laptop.
    both happens when:
    1) whenever i put the laptop into sleep mode or either windows does so automatically (inactive period), - the laptop will go to sleep just fine.
    2) windows turns off monitor after a period of inactivity. (sleep mode due to inactivity was disabled in this case)
    in both the cases i mentions above, if i wake the computer within lets say 5 minutes, it'll turn on just fine.
    but after a certain period of time passes it wont.
    with the sleep mode, the computer will wake and will then produce a BSOD STOP error 0x4 and restart.
    with monitor turned off it'll simply wont turn on, not responding to neither keyboard, mouse or power button. - i have to do a hard reboot
    any ideas?
    anything i can check?
    note the laptop just came back from a warranty repair, so all parts have been tested and been found ok!
    system specs:
    MSI GT70-0ND
    CPU: Intel Core i7-3630QM 2.4GHz (Intel GPU HD 4000 included)
    Memory: 16GB DDR3
    Storage: 750GB HDD 7200rpm
                   128GB SSD (Patriot Pyro SE) - OS installed on this.
    GPU: 4GB NVIDIA Geforce GTX 675MX
    OS: Windows 7 64bit
    Thanks in Advance!!

    i dont think i have the same problem as in the other thread.
    my bios:
    my laptop doesnt restart when my screen is turned off and i try to wake it. it would simply wont wake up.
    and my BSOD happens only after i wake the laptop from sleep mode and only if it been in sleep mode for a while. meaning i if i wake it up within a few mins of going to sleep it'll boot justfine.

  • My ipad is freez...it only show a home screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.

    my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.

    Have you tried to reset it? Hold down the sleep and home keys for about 20 seconds and see if you can get it to reboot.

  • My ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.

    my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.plz help me.................thx u

    Option 1
    Try force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You need to be patient and repeat the above many times to recover your iPad

  • How to safely turn off the computer while the motion servo is still enabled?

    When we use PCI-7344 and set it for serve closed control, I have found a very serious problem
    in using the control card in this mode.
    As the card is able to control motors only with the computer at power on status, but if we are very
    carelessly to shut down the computer and without the notice to turn off motor driver power first
    we would always get serious sudden moves of the motors, and might cause damages to the system. The same situation also applies to when control the motors under open/closed loop stepper mode.
    How should I do to prevent the above situation?
    (note: in my system, we have hook up relays and timers if we could set DIO bits before shut down
    the computer. But
    still, there are a certain occassions that the operator would still forget to set the DIO bits
    and turn off the computer directly)

    The Inhibit output pin of the motion controller (also called drive enable) is the best way to achieve this. It is basically a signal that most power drives take in as an active low input so that when the powergoes out of the computer, the line goes low and immediately kills the axis so that no servo ouptut command affects the motor.
    Best regards,
    Alex Games

  • There's a black and white striped glitch on the left side of my screen on my Macbook Air! Its happened before and has been an easy fix, usually just restart or turn off my computer but don't know what else to do. Is there anything I can try now?

    There's a black and white striped glitch on the left side of my screen on my Macbook Air! Its happened before and has been an easy fix, usually just restart or turn off my computer but don't know what else to do. Is there anything I can try now? I wont be able to make it to the Apple store until tomorow and would prefer if there was something I could do that didnt cost money, my computers very new and I really need help.

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    I suggest that you try to repair the phone software using PC Companion..
    Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
    How to backup?
    If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • I tried to eject a cd, didn't work so I turned off the computer and now it keeps getting stuck at the gray screen. How do I fix it?

    Here are a few more details. I put in a game cd for a windows computer, once I opened the folder on the desktop I noticed the install application was .exe so I tried to eject the cd but no matter what I tried on the computer it wouldn't come out. I will say though that I didn't try the manual cd eject cause I didn't have anything small to hit the button in the cd drive with. It was getting late so we decided to just turn off the computer and leave it for the next day. I can't remember if we turned the computer off with apple shut down or by holding down the power button but we walked away pretty quickly before it was fully shut down. The next day the computer won't turn on. When I walked into the room I was the computer stuck with a grey background with the apple logo showing and the circular thing under it frozen. Since no one was in the room I held down the power button and turned the computer off. We tried to start the computer again later but again it keeps getting stuck at the same spot. Now when we hold the power button down to turn it off I'm not sure if it's really turning off all the way. The screen goes dark but it sounds like the fan is still going. I tried disconnecting everything but the keyboard and mouse but when I started it up again it got stuck on the grey screen with just the apple logo. I'd really apprechiate help on this cause I live in Germany right now and support call centers work so much worse when you don't speak the language well... Thanks for any help you can give!

    Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
    Lupunus

  • Say I turn off my Computer or restart it & then I load up Firefox the pages I was previously at loads up. Is there any way to turn this off ?

    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    Say I turn off my Computer or restart it & then I load up Firefox the pages I was previously at loads up. This is very very very annoying & I see no options in the settings to turn this off. Is there any way to turn this off ? Even if I just press the X button to close Firefox then later in the day I open Firefox the previous pages always open & it is annoying. I apologize for the language but that is just how ''irritated'' & annoyed I am about this
    <blockquote>language cleaned up by a moderator - eh</blockquote>
    == This happened
    ==
    Every time Firefox opened
    == It started randomly
    ==
    == Troubleshooting information
    ==
    There was nothing in the Troubleshooting about this
    == Firefox version
    ==
    3.6.3
    == Operating system
    ==
    Windows XP
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
    == Plugins installed
    ==
    *-Default Plug-in
    *The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
    *Shockwave Flash 10.1 r53
    *Adobe Shockwave for Director Netscape plug-in, version 11.5
    *iTunes Detector Plug-in
    *3.0.50106.0
    *Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

    Hello David.
    Go into ''Tools > Options > General > Startup:When Firefox starts:'' and configure it as you want (probably to show your home page?). This is the very first option that appears in the options screen, but I understand that it may not be very easy to find. Firefox 4 will not include any redesign to the options screen (except possibly it appearing in a tab, rather than in a popup), but you may interested to know that there are plans to redesign the options screen for versions after Firefox 4, to make it easier to use. If you want to know more about the redesign, just ask.
    Anyway, if that doesn't help (it probably does, but just in case), it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.

  • How to invoke "Turn off the computer at the end"

    "Hey honey...wake up and get your spotty white *** out of bed and go turn off my computer"

    =============
    "Hey honey...wake up and get your spotty white *** out of bed and go turn off my computer"
    ============
    it must be....YES... IT IS !!!!  BEER THIRTY !!! YIPEE !
    ( no man would risk life and limb blurting this out without having a few beers under his belt ! )

  • Should i be turning off my computer every night

    should i be turning off my computer every night

    Hi,
    This would be largely down to personal choice.  I would turn it off - why waste electricity on something you're not using
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for