Is it better to install windows on the same mac hard drive or use the second hard drive bay as it's own? Im also using deploy studio and am having trouble creating a workflow to assign the bay.

Have mac pros with 1tb drives in tem. Trying to figure out imaging via deploy studio.

For the easist install and problem solving having W7 on it's own disk would be the best way to go.
The only thing you need to do is either take out the lower # drives ahead of the future Windows disk or put the Windows HD in bay/slot #1. (or just take out all but the future W7 disk and install it manually works too)
The easiest way would be to put the W7 drive in slot slot/bay #1 then you can still use BC Assistant to install the drivers and such.
After the install you can have the Windows drive in any slot you want.
I'm not familier with Deploy Studio so can't help you beyond this.

Similar Messages

TS1814 we bought an ipod touch and are having trouble switching from old ipod to the new one

we bought an ipod touch and are having trouble switching from old ipod to the new one

OK.
If you have a question, then explain your issue and ask it.

TS3276 i am having trouble with my exchange emails. I use the latest exchange 2010 and am having trouble downloading all my emails on the macbook

I use a microdost exchange 2010 in my office. I just bought a macbook pro and try to syn my office mail. While it has been set up properlly and it has started downloading some of my older emails, it is taking very long and does not download all the mails especially the new ones. The ones it has downloaded take a long time to load and open.
I bought the laptop to use it on the go. What is the solution? Please help.
Thanks.

Startup your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
If the startup disk is not available from that window, you may be able to repair the disk.
Help here > A flashing question mark appears when you start your Mac

HT5628 Is it possible to format entire hard disk and install windows 8 only in mac mini?

Is it possible to format entire hard disk and install windows 8 only in mac mini?

You can, but it's not recommended. If you are going to use Windows all the time, at least give some GBs to OS X, because you will need it to install firmware updates.
Use Boot Camp Assistant to create a Windows partition. You can find it in /Applications/Utilities. Then, follow Apple's steps to install Windows 8 > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf You must use a 64-bit version, and note that not all Mac minis support Windows 8. Check if yours is supported > http://support.apple.com/kb/HT5634?viewlocale=en_US&locale=en_US
Boot Camp Assistant will ask you to download the Windows support software onto a USB drive. You will need to install it in Windows, so it's very important to download it. If not, you will have problems in Windows.
If your Mac doesn't support Windows 8, install the Windows version the site gives you

Uninstalling, then re-installing the CS6 beta trial on the same Mac 

My inquiry is really simple:
Can anybody authoritatively confirm that it is possible to uninstall the CS6 beta trial, then re-install it on the same Mac and it will continue to work as when you first installed it, before the uninstall.
That's all. Forget about any other version of any other software being installed or not.
This was not possible with previous trial versions, as the trial would expire instantly upon uninstalling it.
I'm starting a new thread to get away from any confusion.
Thank you.

Thank you again, Pete, and my thanks also to those who replied in my other thread.
I did in fact uninstall the CS6 beta, installed Ps 12.1 ("CS5") upgrade without having a previous version installed, updated ACR to 6.6 then successfully re-installed the CS6 beta. Everything is working fine.

How to create activity workflow based on the Web API 2 services

Hi,
We have Web API 2 services and we want create activity workflow based on the Web API 2 services.
Web API 2 services provide some application operations and based on this operations we would like to create custom activity workflow.
Question:
Is that possible?
Could you please give best practices to create activity workflow based on the Web API 2 services ?
Thanks for your support.

HI Max_P,
Welcome to workflow forum.
ASP.NET Web API is a framework that makes it easy to build HTTP services that reach a broad range of clients, including browsers and mobile devices. ASP.NET Web API is an ideal platform for building RESTful applications on the .NET Framework.
I researched relevant topic about creating workflow application using Web API 2, I just found these resources about it.
Learn About ASP.NET Web API
Hope it helps.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I would like to know what is better to instal windows 7 or XP?

I would like to know what is better to instal windows 7 or XP?

steve359 wrote:
I did not say XP is useless, just old.
My work project requires certain compatibilities. One of those is "IE 7". So we are no supposed to re-image the PCs with 7, even though corporate-wide is moving towards re-image with 7.
But when my XP install failed, the local PC admin said that re-intstalling XP would be days of patching, while 7 was a single-image-install with few patches.
Pick your poison, I guess.
Well not to get off topic but your company needs a new IT guy. You can slipstream all the updates into an install image and for that matter you can take one PC, updates it, create an image from it and use a universal install feature to image any PC with that updated image.
Now back on topic.

ITunes quits when I'm trying to open it. I have installed the latest version and another user on the same Mac can use their iTunes when they log in. I have tried deleting iTunes and re-installing but it still won't open. Any ideas?

iTunes quits when I'm trying to open it. I have installed the latest version and another user on the same Mac can use their iTunes when they log in. I have tried deleting iTunes and re-installing but it still won't open. Any ideas? Thanks.

Hold down the option key while starting iTunes and make an new library. Will it open then? If so, you have a bad library. With the new library import the library.xml version of the file in your iTunes folder. This will make it 90% like before (some metadata are not identical, but I don't know which ones).
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451

I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

# Question
I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

You probably have not seen anyone reporting the exact same problem as you. All three crash reports have the same crash signature and as currently ranked 67 it is not the commonest of reasons for a crash.
I hope you enter your email contact information when reporting crashes. I note you see this crash when using videos, others may possibly see this crash in other circumstances.
You have already tried the obvious, attempts at a fix so it is now down to wait and see, maybe developers working on the bug will report something or fix it.
Did you try my suggestion of installing portable ESR ?
For forum cross referencing purposes
* Crash Reports for Crash IDs <br />bp-71697f5d-41d4-48ae-9db9-3e6302130607<br /> bp-6e1347bc-153f-433a-9c35-a5f022130607<br /> bp-92a533a2-9e09-4c1e-8df7-deb4c2130607
*(all three) Crash Signature: EnumSoftwareMFTs(_GUID const&, unsigned int, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, IMFActivate***, unsigned int*)
* Related bug 858667 NEW crash in mozilla::wmf::MFTEnumEx @ EnumSoftwareMFTs
*I note this was first seen in Fx21 and is 100% Windows 7
<br />

How do i install pages on another login using the same mac

purchased mac started off sharing a login with hubby but now realized not a good idea when we each have loads of personal and business stuff we do. i downloaded pages to the first log in, which he kept but now need it on my log in. help?

You don't see Pages when you log in to your User?
I gather this is on the same Mac?
Did you install Pages or iWork?
What did you install it from? The Mac App Store or from a DVD or an Installer?
Peter

Can i install windows 7 and OS X together on the same Mac Book Pro?

can i install windows 7 and OS X together on the same Mac Book Pro?

You can do it either using Boot Camp or by running a virtual machine, such as Parallels Desktop (which I use) or VMFusion. I prefer the VM method, as I don't have to reboot using the handful of Windows applications that I use. And I can access my Windows apps just as I do my Mac apps - copy and paste between them, etc.
I just upgraded from Parallels 7 to 8 and I'm quite happy with it, running Mountain Lion on a late 2011 MBP with 16GB of RAM and a 512GB SSD. I also have a 27" Apple Thunderbolt Display and there are no problems with video drivers, etc.
If I were you - unless I needed every inch of performance that running Boot Camp can bring - I'd go with a VM to run Windows. I can attest to the functionality of Parallels - perhaps others with experience with other VMs will chime in.
Clinton

Im having troubles trying to download desktop apps, the blue wheel still spinning in the app tab, i've already try the solutions i've read here, uninstall CC and installed it again, uninstall it, download it again and install ir, and nothing works, I'm wo

im having troubles trying to download desktop apps, the blue wheel still spinning in the app tab, i've already try the solutions i've read here, uninstall CC and installed it again, uninstall it, download it again and install ir, and nothing works, I'm worried because i have a course of some software tomorrow (oct 10). I have a mac, and it has all the system requirements. Can someone help me please?

I think I had the same problem. I've also tried a lot but I found my way out.
Follow every step of this:
Creative Cloud Help | Install, update, or uninstall apps

How can i buy again the same software from the same mac? (where it is installed and runs ok: it is for licences issues)

How can i buy again the same software from the same mac? (where it is installed and runs ok: it is for licences issues)
Thanks for your help.

Hi ..
You can redownload previously purchased apps from the App Store using the same Apple ID on all your authorized Macs for free.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase.

I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue?

I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue? Is it compatibility issue ?

Please also see Boot Camp: Set the default operating system.

I want to install windows 7 on my mac what is the procedure ?

I want to install windows 7 on my mac please help me and let me know the steps to do it ?

See > http://support.apple.com/kb/HT1461

Is it better to install windows on the same mac hard drive or use the second hard drive bay as it's own? Im also using deploy studio and am having trouble creating a workflow to assign the bay.

Similar Messages

Maybe you are looking for