Is it colorizing, a filter, hue/saturation, or what?

I'm curious if anyone knows how make a person the same color as the background?
here is an example.
http://themeforest.net/theme_previews/5221751-mineral-responsive-multipurpose-wordpress-th eme?url_name=mineral-responsive-multipurpose-wordpress-theme

That's just blending modes, in this case probably Multiply or Overlay.
Mylenium

Similar Messages

  • Changing hue/saturation

    I make a selection and choose Image > Adjustments > Hue/Saturation and it seems the colors are completely off when I have the colorize option selected.
    Should this checkbox not be selected when changing colors this way? I know that this could also be done with an adjustment layer, I am just curious why the colors seem off.
    Thanks.

    If your goal is to keep a full range of colors, but skew them on the spectrum, you'll want to make sure Colorize is turned off.
    Colorize works by taking the average value (pure grey) and setting it to be equivalent to your new color (in the Hue/Saturation sliders). This then gets tinted and shaded (using the whites and blacks in your document). Essentially, Colorize fakes a dutotone image (the only colors will be the one you select + black).

  • Adding to the selection of a current hue/saturation adjustment layer?

    I made a selection on a car, used a Hue/Saturation adjustment layer to change that selected color, though I went and used the Magic Wand to add more to my selection and that new part of the selection is not affected by the previous Hue/Saturation adjustment layer. How is this done? Do I have to make a new Hue/Saturation adjustment layer for the added selection Using Cs5.
    Thanks.

    There's selection of the color range the Hue/Saturation layer will work on.  That's controlled by the little sliders that appear when you choose, for example, "Reds".  You can do things like widen or narrow the range of colors included, as well as widen or narrow the ramps defining how much that colors near the edges of the ranges will be affected.
    There's also the possibility that you defined a layer mask when making the Hue/Saturation layer, which will define which pixels in the image will be affected.  If so, you need to click on the layer mask in the Layers panel and paint on it (white to choose which parts the Hue/Saturation layer will work on, black to choose which parts not to work on).  You can, of course, paint grayscale on the layer mask to have certain pixels partially affected.
    Hope this helps.
    -Noel

  • Hue/Saturation Adjustment layer problems

    I posted earlier about having problems printing with new color laser printer and colors printing wrong.  It is not the printer, the printer prints perfect color from what I see on my screen (calibrated).    Have narrowed it down to a hue/saturation adjustment layer.  When I  open and print a scrapbook paper (brownish color jpg) with out doing anything to it,   it prints perfect color.   When I add an hue/saturation adjustment layer  (to change the color to blue)  then it won't print the right  color.  I have  checked "colorize" and unchecked "colorize" when adding  an adjustment  layer.  I have tried flattening the image and merging the layers before printing. I have unclipped the adjustment layer to the layer below.      It prints the wrong colors only when I add a hue/saturation layer
    What am I missing?  This is driving me absolutely crazy!!!
    Thanks!

    You could try Layer - Flatten just for the moment of printing (don't forget to undo it afterward).
    Seems too basic a problem, though...  I more strongly suspect a color management problem.
    Is there a difference in the way you're opening the file that prints well vs. the one that's a problem?  Or is this one and the same file?
    What is your document profile?
    What do you have set in the Photoshop print dialog for color management?
    What do you have set in the printer driver for color management?
    -Noel

  • Hue/Saturation not working?

    I am working on a digital painting that was initially and grayscale, and I'm coloring it using hue/saturation, level, color balance, etc. adjustments. Until yesterday, this approach worked well, but when I go to adjust hue/saturation on any given layer it doesn't have any effect. This problem is not isolated to these works-- I also can't adjust it on other images including photographs. Can anyone help? I am in photoshop CS2 and in RGB mode, if that helps.
    Thanks in advance.

    Trash prefs.

  • Using hue/saturation adjustment layer to match color from another image?

    How can I use a hue/saturation adjustment layer on image 'A' so that it matches the color of image 'B' please?

    Depends, John.
    If you're able to create a reasonable selection via Color Range, feathered masking, etc, then by matching one specific color, you'll also be correcting for that entire range of hue. It might have been needed anyway...or you use a color filter to correct the whole image, if it's needed.
    As we all know, each image presents its own specific challenges and solutions.

  • What video effect for color desaturation? (e.g. Hue/Saturation in Photoshop)

    Hi all,
    What is the Premiere equivalent of the HUE/SATURATION adjustment layer found i Photoshop ? I am trying to slightly desaturate (about -53%) my movie to give it a more gritty look. I could easily get the look I wanted in Photoshpo by going to NEW ADJUSTMENT LAYER-->HUE/SATURATION.
    Is there a similar approach for Premiere? In the Video effects folder somewhere? Thanks!

    Use the "Fast Color Corrector and "Saturation".

  • Replace color and hue/saturation?

    Is there any real difference with using hue/saturation and replace color to change the color of an item OR is it just two ways to do the same thing?

    If you did a hue/saturation change then both the blue and yellow would change according to the sliders that you use.
    That would apply if you edit the Hue/Saturation’s Master (alt-2), but if the Colors are sufficiently different one could influence only the Reds (alt-3), Yellows {alt-4) etc.
    And that’s naturally best done with an Adjustment Layer.

  • In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. Help

    In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
    I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
    I am running a 64 bit version of Photoshop from the CS6 Masters Collection
    I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
    The document size is 2100 by 1500 Pixels at 300 PPI   only two layers

    In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
    I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
    I am running a 64 bit version of Photoshop from the CS6 Masters Collection
    I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
    The document size is 2100 by 1500 Pixels at 300 PPI   only two layers

  • Using Hue Saturation to change color of shirt not working

    In CS5, I tried to make a selection of a white shirt and used Image > Adjustment >Hue Saturation, though when I drag the Hue slider, nothing happens, only a little bit of pixels of color change. Why is this.
    Thanks.

    1. So this is simply the wrong tool to change the color?
    Are you familiar with the geometric representation for the HSB- or LCH-model?
    The straight line connecting white and black is the axis that’s totally neutral, so changing the Hue or the Saturation/Chroma has no effect on points located thereon.
    You can still use Hue/Saturation to colorize neutrals by checking the Colorize-box.
    Or create a Solid Color Layer of the intended color and set it to Blend Mode Color and use a Curves Adjustment Layer to adjust the Luminance below that.
    Edit:
    http://en.wikipedia.org/wiki/HSL_and_HSV
    Figure 2a might be helpful in illustrating the gray axis.

  • How to use color picker or RGB values in the hue-saturation colorize adjustment

    I have a monochromatic adornment that I want to match to the color of a logo.  I am attempting to use the colorize option of a hue saturation adjustment layer to match color.  But I cannot quite get the colors to match.  I know the RGB values of the color, but how do these translate into the Hue/Sat/Lightness numbers of the adjustment dialog?  I tried using the correlating H/S/B values fro9m the color picker but that did not work.
    Any suggestions?

    Thanks Zeno.  Creating a layer with the color and using the blend mode worked fine.  But as I stated in the original post, using the H/S/B (there is no HSL) values from the color picker does not work when you place them into the H/S/L values in the hue-adjustment layer with (or without) the colorize box checked.  But your first suggestion worked like a charm.  Thank you.

  • Hue saturation changing too many colors

    I have some yellow flowers that I want to change the colors of.
    I am also noticing that whether I choose Master or Yellows from the drop down in a hue/saturation adjustment layer, it is still changing the color of some other items in the background that I do not want to change.
    I tried using the history brush over those rocks, and items in the background, though it does not seem to do anything.
    1. Why is it doing this?
    2. What is the best way to have it not change the items in the background?
    Thanks.

    You could also select the stuff you want to change before running the Hue/Saturation function.
    c.pfaffenbichler's advice is good regarding adjusting the color range.
    -Noel

  • When i place my photo, the adjustments tab does not pop up, and even when i click image at the top, I cannot select any adjustments-brightness/contrast,hue-saturation, color blance, etc..Anyone know what I am doing wrong?

    When i place my photo, the adjustments tab does not pop up, and even when i click image at the top, I cannot select any adjustments-brightness/contrast,hue-saturation, color blance, etc..Anyone know what I am doing wrong?

    Good day!
    What is "place" supposed to mean – open, place as Smart Object, …?
    What are the image’s Color Mode and bit depth?
    Could you please post a screenshot with the pertinent Panels visible?
    Does Window > Adjustments not raise the Adjustments Panel?
    Regards,
    Pfaffenbichler

  • My hue/saturation filter quits working in Photoshop CS3

    I keep having this issue where my hue/saturation filter just quits working.  I use that filter religiously so it has to be fixed each time it occurs.  I've only had the Adobe CS3 for 3 months and I've had to resolve this 3 times now.  Each time this has happend I've had to uninstall the entire CS3 design package and do a complete reinstall which takes almost 4 hours because my download uses the Adobe server.  My product download was purchased online so I do not have a disk but rather files that I downloaded from Adobe with product serial numbers.
    I've used Adobe for years, as far back as Adobe 5, and never had such a problem!  I've checked in my preferences and have ample RAM available for the settings.  I use Dell inspirion and have 2 GB of RAM total on my system.
    Can someone please advise why this would keep happening.
    Thank you very much.

    Resetting your preferences is much faster than uninstalling/reinstalling, so if you haven't tried it, that would be what to do next, although it would be nice to figure out what the issue is.
    To reset your preferences hold the Ctrl-Alt-Shift keys down (windows) or Ctrl-Option-Shift keys down (mac) as you start up Photoshop.  You should get a message confirming whether you want to delete the preferences file.  If resetting preferences fixes things, then you should try to remember what you've been doing, just prior to having the problem.
    Once Hue/Sat sliders seem to be disabled, are they still way for all images that you open (a JPG for example), or are they just messed up for one image, but you need to work on that image so you have to fix things before doing anything else?  Hue/Sat is not a valid operation for certain modes, like Grayscale, although the menu item is disabled in this case.
    From: smk2008design
    Sent: Saturday, April 11, 2009 4:40 PM
    To: Steve Sprengel
    Subject: Re: My hue/saturation filter quits working in Photoshop CS3
    The hue/saturation filter window does open and it is not grayed out.  However, it does not allow me to do any thing to it.  I try to slide the saturation to the left or right and it does not move.  The same goes for the "Lightness" and "Hue".  I don't understand why it will work for a month or so and then just quit.  I end up rebooting my system to try and resolve but unfortunately once this occurs it seems to be stuck no matter what I do, that is until I unstall the entire program and reinstall...
    So if I need to change something in my preferences, what do you suggest that would be?  I appreciate your help, thank you.

  • Hue/Saturation color channel control in P Pro?

    After Effects has a Hue/Saturation effect that allows users to adjust hue/saturation within a pre-defined or user-defined color channel range. Is there a way in P Pro to do that?

    5.5 has color balance HLS preset in the effects tab, you should find that better.
    RGB curves may also work better with your color caste.
    It is often a case of using different correction effects or even multiple one.
    You can also try the Fast Color correction preset, move the centre point directly away from the yellow which in your case is towards the 18 minute point if the dial is 60 minutes.

Maybe you are looking for

  • How to put custom check box in a tableview column

    Hi, I would like to put a custom checkbox in a tableview column for each row of the table. Such that when the user selects the rows and among those rows if for fews rows this checkbox is active, i need to do some special processing. how can i add a c

  • Destination data of customer in Leg (3 party shipmnt)

    Hello, Can any one clear me on this: "I am assuming that during creation of leg in inbound shipment, the destination tab in the cust/unload pt field should be given as the Sold to party address, which in turns picks up the ship to party address(if an

  • BADI or User-Exit for Adding New Input Field in 0VTC

    Hi Experts, Has any of you worked on enhancing transaction 0VTC (Define Routes and Stages)? I have a requirement right now to add two new input fields in New Transport Routes screen. Could anyone provide a BADI or customer exit that I could use to mo

  • Document field in batch

    Dear Experts, In the batch master record , there is a tab Changes . In that screen area * Overview of changes* there is a column Document . What is that document and how to see the detailed information contained in that document ? Thanks .

  • Are files compatible with other nokia mobiles ?

    Hi ! My nokia mobile has just been broken and cannot be switched on. I recorded my friend's phone numbers in a Nokia PC Suite file. I'd like to transfer those data to my new nokia phone (I haven't bought it yet, but it won't be the same because mine