Is it difficult to migrate files from an older Power Mac G4 to a Mac Book Pro

I have a MacBook Pro, OS 10.8.4 and would like to migrate files on my old PowerMac G4, OS 10.4.6.  I have never done this before and would like help on transferring files from my Power Mac to my MacBook Pro. 

1. You need to connect the two computers in some way. This could be a physical connection, e,g, with an ethernet cable, or wireless. (Be warned, the latter will be slow.)
2. Enable file sharing on both computers.
3. Use Migration Assistant. Details here:
http://support.apple.com/kb/HT4889

Similar Messages

  • How do I migrate files from MacBook running OS 10.4.11 to new MacBook Pro running OS 10.6? Thanks.

    How do I migrate files from my MacBook (specs below) to my still in the box MacBook Pro running OS 10.6?  Yesterday, I ran Software Update; it returned the message that all my software was up to date / no updates available.
    I am particularly concerned with moving the 7000+ photos in iPhoto.  I have photos organized into folders and albums and want to preserve this structure.  I use this photo data as part of my lecture content.
    Thanks for your help.
    Best,
    lauri with poodles
    (the big standard poodles without the goofy Hollywood haircuts)
    Specs -  Old laptop
    MacBook 13"
    OS 10.4.11
    2 Ghz Intel Core 2 Duo
    2 GB 667 Mhz DDR2 SDRAM
    112 GB total disk space
    59 GB available
    using  iPhoto 6.0.6
    Specs - New laptop
    MacBook Pro 15"
    OS 10.6
    2.0GHz Quad-core Intel Core i7
    4GB 1333MHz DDR3 SDRAM - 2 x 2 GB
    128 GB Solid State Drive

    Hi, Lauri. Welcome to Apple Support Communities.
    http://web.me.com/pondini/AppleTips/Setup.html
    From Ronda with Pomeranians.

  • How do I migrate files from a power pc mac to a macbook air?

    Has someone successfully migrated files from their old power pc based mac (no airport card) to a macbook air? If so, please explain step-by-step instructions how to do this w/ wired connection method.  I know that the newer macbook air only has USB 2.0 ports.  What simple connector and adaptors would I need to accomplish this task? My old or source computer is a mac mini w/ the latest 10.4.11 OS that it can run.  Thank you.

    Your cloning idea is a good one, however he can use Setup Assistant to migrate rather than Migration Assistant. Pondini has written an elegant article on how to effectively use it  in Setup Assistant tips. If the OP clones and uses Setup Assistant his transition should be seamless. He may have applications that are not designed to run on Snow Leopard so I'd recommend only migrating his data and manually installing Applications once he has determined the ones he has on his PPC machine will run on Snow Leopard. If they will not then he has the option to update individual apps.

  • I  have a new Mac Pro computer and have migrated my files from my older computer to the new computer. In trying to open a Lightroom catalog on an external hard drive  I keep on getting the message "lightroom cannot use the catalog named " " because it is

    I  have a new Mac Pro computer and have migrated my files from my older computer to the new computer. In trying to open a Lightroom catalog on an external hard drive  I keep on getting the message "lightroom cannot use the catalog named " " because it is  not writable and cannot be opened. I have fixed all the "permissions" and yet it will still not open. How do I fix this?

    Hello Forum Members,
    I figured it out. You have to select  the actual logo of the Lightroom catalog and then click on  "get info" and allow what ever your new user name to "read and write". That worked!
    Henri Silberman

  • Cannot migrate files from old MacBook to new MacBook Pro

    I have been trying without success to migrate files from my old MacBook to my new one.  The Migration Assistant doesn't work.  The new Mac recognizes the old one but the old one cannot see the new one.  The old MacBook has OS 10.5.8 and the new MacBook Pro has 10.8.1.
    Then I tried migrating from my Time Machine backup, with the external drive still connected to the old MacBook, but it kept telling me I didn't have enough space to copy anything, even when I unchecked everything except my Documents folder.
    I went to the Apple Store and one of their "geniuses" told me I could connect the external hard drive directly to the new MacBook Pro and migrate the files from there.  That didn't work either; I got an error message about incompatible software.
    The genius also told me that I could back up the new MacBook Pro to the same external hard drive with Time Machine that I'd been using and that I'd be able to restore from backups from either computer, but that's not true.  I cannot see any backups on the drive except from the new computer.  Time Machine does recognize that there is space in use on the drive but will not show me any of the content.
    Does anyone know how I can migrate my files, short of copying them to a flash drive and doing it the old-fashioned way?  Thank you!

    It is possible to merge accounts but it is not easy nor foolproof. The easier solutions:
    1. Remove the account made in Setup Assistant and change the username on the migrated account.
    See Mac OS X- How to change user short name or home directory name.
    See Macworld | Changing the short username in Leopard - use the last procedure, "The Full Monty."
    2. Log into the migrated, renamed account and delete the account made in Setup Assistant, then re-migrate your data.

  • I just received my new Mac Mini and want to migrate files from my Time Machine. I assume the old OS is on Time machine and I don't want it to supersede the new Yosemite OS. Do I have to Do anything special?

    I just received my new Mac Mini and want to migrate files from my Time Machine. I assume the old OS is on Time machine and I don't want it to supersede the new Yosemite OS. Do I have to Do anything special?

    Using Migrations Assistant will only move the data and other things over, it will not bring over a previous version of the Os since the 2014 model can run anything earlier than Yosemite.

  • How do i migrate files from a imac to macbook pro using an ethernet cable. the migration program asks for firewire and i don't own a fireWire.  I do own an ethernet cable though

    how do i migrate files from a imac to macbook pro using an ethernet cable. the migration program asks for firewire and i don't own a fireWire.  I do own an ethernet cable though

    A FW cable would be far faster & Easier, but with Ethernet you need a compatible version of Migration Assistant running on both Macs.

  • I need indesign cs6 becasue I am migrating files from pagmaker. Can I download a trial version ?

    I need indesign cs6 becasue I am migrating files from pagmaker. Can I download a trial version ?

    Here is the direct Adobe page.
    http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  • After migrating files from iMac to new macbook pro my macbook is now called iMac in device listing

    I purchase a new macbook pro and migrated files from my iMac all the files moved and everything is good except now in finder under device my macbook is now named as my iMac. can I change this?

    Go to System Preferences click Sharing and change the Computer Name.

  • HT4889 Migrating files from OX 10.4.11 to Mavericks

    I am pretty much a computer dummy and don't want to mess up.  I just purchased a imac running Mavericks.  My old computer is a Power Mac G4 running OS 10.4.11.  Is there anything special I need to know about migrating files  from such an old computer?  My second question is, is there drivers available for a Laserjet 5000 series printer for Mavericks?  I don't see a link on the HP site.

    Hi, I've been struggling with this all evening for a friend. I've not succeeded but will share some info which I hope will help:
    To migrate between Macs you need to use MA (Migration Assistant), (Applications > Utilities) but when attempting to migrate from 10.4.11 to Mavericks it will tell you that you need to upgrade your version of MA. The problem is that there is no upgrade available, even with the latest version of MA for 10.4.11 it will give you the same message.
    To get a more recent version of MA you need to upgrade to OSX 10.6. This is available from the apple website for $19.99 (£14.99)
    http://store.apple.com/uk/product/MC573Z/A/mac-os-x-106-snow-leopard
    In order to install Snow Leopard you must have at least 1GB of RAM on your Mac otherwise Snow Leopard won't install.
    To find out how much RAM you have click on the Apple icon (top left), click "About This Mac" and on the pop-up check that for Memory you've at least "1 GB".
    "512 MB" will not work. If you've less than 1 GB you'll need to buy more RAM.
    If you manage to upgrade to Snow Leopard then I hope Migration Assistant or Time Machine works for you!
    Good luck!

  • HT1277 Mail has gone crazy. Header's and messages are mixed up. New Mac Book Pro. Migrated files from Time machine running snow leopard. Reinstall or new computer needed?

    Mail has gone crazy. Header's and messages are mixed up. New Mac Book Pro. Migrated files from Time machine running snow leopard. Reinstall or new computer needed?

    Ok; I'm not sure what you're doing.    36 hours is rather long.  Seems like a new migration.  Not what I intended.
    Here's what I intended: from the newly-migrated and apparently-corrupt environment, create a new user, not related to any existing user, nor any migration-created user, or any other user for that matter.  That is, use  > System Preferences > Users and Groups, authenticate yourself by clicking on the padlock, and then click the + and create a wholly new user.  Then log in under that user and establish the mail access.
    36 hours?  I'm wondering if there's an error or an exceedingly slow network here?  Or a really, really slow disk?  Or a sick backup?  (WiFi isn't the path I'd usually choose, either.)
    Failing the attempted second migration, I'd try a different tactic.  Does your existing (old) system work?   If so, I'd bypass the backup and connect an external (scratch) USB disk drive to the (old) sstem and then boot and use Disk Utility booted from the installer DVD disk or boot and use Disk Utility from the recovery partition or booted from a recovery partition created on some other external storage (details here vary by the OS X version and what hardware you have), and perform a full-disk backup of your original internal disk to (scratch) external storage.  (Make sure you get the source and target disks chosen correctly here; copying the wrong way — from the scratch disk to your existing disk — will clobber your data!)  In esssence, this will clone your existing boot disk.  Then dismount the (formerly-scratch) external disk, transfer it over to the new system, and use it as the source of the migration, by performing a fresh OS X installation on the new system.
    Target Disk Mode is also sometimes an option for accessing the disk for a migration, but that requires the right cable, and requires systems that have the same external connection; newer MacBook Pro systems use Thunderbolt for this, and older systems tend to use FireWire.  And I'm guessing you don't have compatible hardware.
    The details here can and do vary by your OS X versions and your particular Mac systems — if you'll identify the specific models and hardware, somebody might be able to better tailor the above (fairly generic) sequence to your particular configuration.

  • I can't migrate files from my old imac to a new one.

    I can't migrate files from my old imac to a new one. I'm using a firewire 800 to a thunderboldlt adapter, my new imac doesn't find the source. Would a usb 2 to usb 2 work?

    Did you put your old iMac in Target Disk mode? You need to do this to use Migration Assistant to transfer your files to the new iMac.
    Hold the T key while your old iMac is starting up to start up in Target Disk mode. After doing this, your new iMac will detect it as an external drive, so now you can transfer your files through Setup Assistant or Migration Assistant. See > http://support.apple.com/kb/HT5872?viewlocale=en_US

  • HT4413 Migrating files from old mac using Sata ide adapter

    Im trying to migrate files from my old mac hard drive (old mac isnt working- just hooked up hard drive to sata ide adapter) --- when I go to Migration Assistant, "select your disk" it just keeps thinking, it doesnt pull anything up.  When just plugging in the sata adapter, it doesnt come up automatically to run either.  I have used this adapter before with this old harddrive, so I know it works (I had help the last time)....I just cant figure it out this time.  Please help

    You cannot use Migration Assistant.  When you connect the old HDD, does it appear on the desktop of the MBP.  If it does, you will have to transfer the files manually.
    If not, does it appear in Disk Utility?  Post a screen shot such as this:
    Ciao.

  • I'm attempting to migrate files from iMac to new MacBook air. The estimated time shown on the display is over ten hours. Is that correct? Is there a way to do it quicker?

    I'm attempting to migrate files from iMac to new MacBook air. The estimated time shown on the display is over ten hours. Is that correct? Is there a way to do it quicker?

    It's quite possible, since you are using an MBA without Firewire, that it could take that long.
    A Basic Guide for Migrating to Intel-Macs
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate.  Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    >Classic Environment, and subsequently any Mac OS 9 or earlier applications
    >Screensavers written for the PowerPC
    >System Preference add-ons
    >All Unsanity Haxies
    >Browser and other plug-ins
    >Contextual Menu Items
    >Applications which specifically require the PowerPC G5
    >Kernel extensions
    >Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard.  The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.  Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
    will work better when moving from PowerPC to Intel Macs.   The initial section below discusses Target Disk Mode.  It is then followed by a section which discusses networking with Macs that lack Firewire.
    If both computers support the use of Firewire then you can use the following instructions:
    1. Repair the hard drive and permissions using Disk Utility.
    2. Backup your data.  This is vitally important in case you make a mistake or there's some other problem.
    3. Connect a Firewire cable between your old Mac and your new Intel Mac.
    4. Startup your old Mac in Target Disk Mode.
    5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
    1. Set up a local home network: Creating a small Ethernet Network.
    2. If you have a MacBook Air or Late 2008 MacBook see the following:
    >MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
    >MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
    >MacBook Air- Migration Tips and Tricks;
    >MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
    Copy the following items from your old Mac to the new Mac:
    >In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    >
    >In your /Home/Library/ folder:
    >/Home/Library/Application Support/AddressBook (copy the whole folder)
    >/Home/Library/Application Support/iCal (copy the whole folder)
    >Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    >
    >/Home/Library/Keychains (copy the whole folder)
    >/Home/Library/Mail (copy the whole folder)
    >/Home/Library/Preferences/ (copy the whole folder)
    >/Home /Library/Calendars (copy the whole folder)
    >/Home /Library/iTunes (copy the whole folder)
    >/Home /Library/Safari (copy the whole folder)
    >
    >If you want cookies:
    >
    >/Home/Library/Cookies/Cookies.plist
    >/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    >
    >For Entourage users:
    >
    >Entourage is in /Home/Documents/Microsoft User Data
    >Also in /Home/Library/Preferences/Microsoft
    >
    >Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the  Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.
    Revised 1/6/2009

  • I have had a series of Macs.  They have been backed up with Time Machine. I am trying to restore TM backup files from the older Macs using my new MacBook Pro.  No go.  What do I do ?

    I have had a series of Macs.  They have been backed up with Time Machine. I am trying to restore TM backup files from the older Macs using my new MacBook Pro.  No go.  What do I do ?

    I am trying to restore TM backup files from the older Macs using my new MacBook Pro.  No go.
    Migration Assistant (Finder > Applications > Utilities > Migration Assistant) is the tool that you would use to restore backups from older Macs to another Mac.
    Details are here:   http://pondini.org/OSX/MigrateLion.html   The same info applies for Mavericks and Yosemite.   If you are saying that this is a "no go".....where are you getting stuck?  What error messages do you see?

Maybe you are looking for