Is it fttp or fttc for my area?
Hi
I live in a rather large town but my house is fed off a smaller rural exchange some 3miles away. While the rest of the town gained FTTC through the commercial rolll-out ours was sadily missed. BDUK and Leicestershire County Council seem to be stepping in to fund the upgrade.
Large parts of our estate have Virgin but some 250 homes including mine cant get etither Virgin or a an ADSL connection much above 2-4mb/s.
Our exchange is due to be upgraded to fibre later this year and i decided to see if my line would producce any information as i believe that if the upgrade is circa 3 months away the BT Wholesale ADSL checker should include details? To cut that part of the story short it produced just the normal ADSL info and nothing about fibre.
I then decided to put the exchange, postcode and telephone number into SamKnows and this is where the confusion has arrisen.
"FTTC is not yet available in your area"
FTTP will be available in your area, but the precise date is unknown
Is this just SamKnows being unreliable or having an update or am i looking at FTTP in my area rather than FTTC or is it just to early to say?
Thanks for your help
Ben
Hi
Your best source of information will be Superfast Leicestershire. If you go here http://www.superfastleicestershire.org.uk/contact-us/ there is a contact number and email addresses. They will be able to tell you excactly what you'll be getting and roughly when.
Similar Messages
-
FTTP or FTTC Options ?? Rural location with new fi...
Hi All,
I live out in the sticks and we have been limited to sub 2mbps for years and years. As part of the Rural Broadband project, Openreach have been installing fibre in the area for the last few months. It has been difficult to get any information on what they have been doing, but they seem to have been installing new ducting throughout the area, they also installed a new cabinet in the village, but it is not one of the the big green infinity cabinets.
Anyway....today they were working in my road. They have blown fibre all the way to the manhole outside my house - and I am the very furthest house from the exchange (3 miles) or the cabinet (1 mile). The manhole is about 10 feet from the boundary of my property.
I had a chat with one of the OpenReach engineers working and asked if they were installing the fibre for FTTP or FTTC. His reply was "both". He said that once the network goes live, we will have the option of ordering either FTTC via the existing copper back to the cabinet, or FTTP directly from the fibre outside the house.
So....does this sound right? Obviously, I am over the moon about the possibility of getting real high speed FTTP, but don't want to get my hopes up.
But on the FTTC option, the new cabinet that was installed in the village looks almost identical to one of the old copper ones. No venting and about the same size as a standard old" one. When this was installed prior to Christmas, I asked the engineers working on it what they were doing. They told me they were just installing a replacement copper cabinet as the base of the old one sat in water and (obviously) caused issues. I have also noticed new BT manholes popping up near to clusters of houses around the village, with new ducting runs from them to the older manholes. Are these likely to be fibre agrregation nodes of some sort?
Anyway - does all this sound "normal"? My presumption is that they would not have run fibre as far as the house unless we were definitely going to get the FTTP option. And does the lack of the "typical" Infinity cabinets in the area indicate anything?Also - typically how long after the fibre is in would the network go live?
Many thanks,
AlasdairHi adentonmiller,
Yes some exchanges have been designated a FTTC/P exchange meaning that some areas within that exchange area will have access to FTTC where other areas within the same exchange area will have access to FTTP.
For some information on the Fibre installation process view this video:
A) FTTC (Fibre to the cabinet) - http://www.youtube.com/watch?v=53NcsctuxV0
B) FTTP (Fibre to the premises) - http://www.youtube.com/watch?v=N_gUBw8gh90
As to the timescale it depends on how far Openreach have gotten with the deployment of FTTC/P in your exchange area. It can take serveral months if they deployment is already underway or over 12months in some cases.
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved. -
Suggest EnhanceMent For SALES area determination In stock Transfer.
Suggest EnhanceMent For SALES area determination In stock Transfer.
V02V0001 Sales area determination for stock transport order Doesnt Work,Is user exit required, as the sales area will be different. Incase of Intra company stock transfer the process will be as under:
Create Purchase Order (ME21N)
Create Delivery in background (VL04, VL10a, VL10C, etc)
Change Delivery for picking / packing & PGI (VL02n)
Create Billing Document (VF01)
Assumption: Stock Transfer configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
Incase of Inter-company, the process will be as under:
Create Sales Order (VA01)
Create Delivery (VL01N, etc)
Change Delivery (VL02N)
Create Billing Document (VF01)
Assumption: Configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
Regards,
Rajesh Banka -
All graphics / vector in Save for Web are getting blurry / unsharp from Illustrator
All graphics / vector in Save for Web are getting blurry / unsharp from Illustrator. Same problem with save for web in Photoshop. Frustrating to be working as a designer and not be able to create sharp logos for mail sign, word templates, PPT templates etc etc. I purchased this Adobe Creative Cloud package in Sept, and are working on my Mac HD, OSX, Vers 10.9.4. I have been using the same programs on a PC for years and never had this same problem. Its frustrating!! What to do??
gif, jpg and png are pixel formats, so please clarify what the problem is supposed to be.
Screenshots or posted files might help. -
i am currently running a trial version of indesign. i am trying to make a cd booklet. when i open a new document and try to find 'compact disc' in the document presets, it isn't there. all i have for options are 'default and custom'. is it possible to open the 'compact disc' preset from a trial version?
Are you sure, Eugene? I have this option:
-
I used a projecteor a while back in a Power Point presentation. Now my menus for Adobe are very small and hard to read. The print command is so compressed that I cannot read or use it. How do I fix this problem?
There is no application called "Adobe" - you are either working with Adobe Acrobat or the free Adobe Reader. Open up the preferences for the application (Edit>Preferences), then go to the "General" category and modify the settings for "Scale for screen resolution". You will have to restart the application after you do that. Does that fix your problems?
-
I accidentally bought an 15GB iCloud service, and I want a refund of my money. How can I get my money back? I can't find the email adress to ask for it (I live in Chile. Apple doesnt have Phone support for this area)
Please, help me :)Your best bet would be to try resetting the password to the account that you would like to use via iForgot
Once you log in to that account change the email address to anything, it can even be fake its just a placeholder
After you do that you will be free to change your old email address on your appleID to the new one that is now free to be used as it is no longer attached to the other account. -
The battery for my macbook pro 13 says "service battery". Now I want to get a replacement but the reviews for it are horrible! Does anybody have any suggestions? I don't want to spend 130 dollars on something I'm going to have to replace in less than a year (which is what normally I been reading) I do design work and I take my mac everywhere. Having to always look for a plug or having to be constantly plugged in doesn't sound ideal to me. Please help me. what should I do???
Why does it matter if it a scam????? I'll let you figure that out by yourself. If I'm going to replace it, why should I be contempt with a battery that I have to replace within months (as stated by some people in the comments). The issue here is not if I should or not replace it OBVIOUSLY I'm going to have to before it starts going crazy. The underlying issue is why is the replacement battery for a lack of better words " a bit crap." It comes with a 3 month guarantee?? Is that a joke?!??!?! Some people complained it malfunction after only 8- 9 months? I'm sorry but as an Apple fan I think it's absolutely rubbish. I know there is no magic cure I'm just hoping someone shines the light on how crappy this replacement is.
-
Hi All,
We are trying to access the Create Deployment method stated below
http://msdn.microsoft.com/en-us/library/windowsazure/ee460813
We have uploaded the Package in the blob and browsing the configuration file. We have checked trying to upload manually the package and config file in Azure portal and its working
fine.
Below is the code we have written for creating deployment where "AzureEcoystemCloudService" is our cloud service name where we want to deploy our package. I have also highlighted the XML creation
part.
byte[] bytes =
new byte[fupldConfig.PostedFile.ContentLength + 1];
fupldConfig.PostedFile.InputStream.Read(bytes, 0, bytes.Length);
string a = Encoding.UTF8.GetString(bytes, 0, bytes.Length);
string base64ConfigurationFile = a.ToBase64();
X509Certificate2 certificate =
CertificateUtility.GetStoreCertificate(ConfigurationManager.AppSettings["thumbprint"].ToString());
HostedService.CreateNewDeployment(certificate,
ConfigurationManager.AppSettings["SubscriptionId"].ToString(),
"2012-03-01", "AzureEcoystemCloudService", Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot.staging,
"AzureEcoystemDeployment",
"http://shubhendustorage.blob.core.windows.net/shubhendustorage/Infosys.AzureEcoystem.Web.cspkg",
"AzureEcoystemDeployment", base64ConfigurationFile,
true, false);
<summary>
/// </summary>
/// <param name="certificate"></param>
/// <param name="subscriptionId"></param>
/// <param name="version"></param>
/// <param name="serviceName"></param>
/// <param name="deploymentSlot"></param>
/// <param name="name"></param>
/// <param name="packageUrl"></param>
/// <param name="label"></param>
/// <param name="base64Configuration"></param>
/// <param name="startDeployment"></param>
/// <param name="treatWarningsAsError"></param>
public static
void CreateNewDeployment(X509Certificate2 certificate,
string subscriptionId,
string version, string serviceName, Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot deploymentSlot,
string name, string packageUrl,
string label, string base64Configuration,
bool startDeployment, bool treatWarningsAsError)
Uri uri = new
Uri(String.Format(Constants.CreateDeploymentUrlTemplate, subscriptionId, serviceName, deploymentSlot.ToString()));
XNamespace wa = Constants.xmlNamespace;
XDocument requestBody =
new XDocument();
String base64ConfigurationFile = base64Configuration;
String base64Label = label.ToBase64();
XElement xName = new
XElement(wa + "Name", name);
XElement xPackageUrl =
new XElement(wa +
"PackageUrl", packageUrl);
XElement xLabel = new
XElement(wa + "Label", base64Label);
XElement xConfiguration =
new XElement(wa +
"Configuration", base64ConfigurationFile);
XElement xStartDeployment =
new XElement(wa +
"StartDeployment", startDeployment.ToString().ToLower());
XElement xTreatWarningsAsError =
new XElement(wa +
"TreatWarningsAsError", treatWarningsAsError.ToString().ToLower());
XElement createDeployment =
new XElement(wa +
"CreateDeployment");
createDeployment.Add(xName);
createDeployment.Add(xPackageUrl);
createDeployment.Add(xLabel);
createDeployment.Add(xConfiguration);
createDeployment.Add(xStartDeployment);
createDeployment.Add(xTreatWarningsAsError);
requestBody.Add(createDeployment);
requestBody.Declaration =
new XDeclaration("1.0",
"UTF-8", "no");
XDocument responseBody;
RestApiUtility.InvokeRequest(
uri, Infosys.AzureEcosystem.Entities.Enums.RequestMethod.POST.ToString(),
HttpStatusCode.Accepted, requestBody, certificate, version,
out responseBody);
<summary>
/// A helper function to invoke a Service Management REST API operation.
/// Throws an ApplicationException on unexpected status code results.
/// </summary>
/// <param name="uri">The URI of the operation to invoke using a web request.</param>
/// <param name="method">The method of the web request, GET, PUT, POST, or DELETE.</param>
/// <param name="expectedCode">The expected status code.</param>
/// <param name="requestBody">The XML body to send with the web request. Use null to send no request body.</param>
/// <param name="responseBody">The XML body returned by the request, if any.</param>
/// <returns>The requestId returned by the operation.</returns>
public static
string InvokeRequest(
Uri uri,
string method,
HttpStatusCode expectedCode,
XDocument requestBody,
X509Certificate2 certificate,
string version,
out XDocument responseBody)
responseBody =
null;
string requestId = String.Empty;
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(uri);
request.Method = method;
request.Headers.Add("x-ms-Version", version);
request.ClientCertificates.Add(certificate);
request.ContentType =
"application/xml";
if (requestBody != null)
using (Stream requestStream = request.GetRequestStream())
using (StreamWriter streamWriter =
new StreamWriter(
requestStream, System.Text.UTF8Encoding.UTF8))
requestBody.Save(streamWriter,
SaveOptions.DisableFormatting);
HttpWebResponse response;
HttpStatusCode statusCode =
HttpStatusCode.Unused;
try
response = (HttpWebResponse)request.GetResponse();
catch (WebException ex)
// GetResponse throws a WebException for 4XX and 5XX status codes
response = (HttpWebResponse)ex.Response;
try
statusCode = response.StatusCode;
if (response.ContentLength > 0)
using (XmlReader reader =
XmlReader.Create(response.GetResponseStream()))
responseBody =
XDocument.Load(reader);
if (response.Headers !=
null)
requestId = response.Headers["x-ms-request-id"];
finally
response.Close();
if (!statusCode.Equals(expectedCode))
throw new
ApplicationException(string.Format(
"Call to {0} returned an error:{1}Status Code: {2} ({3}):{1}{4}",
uri.ToString(),
Environment.NewLine,
(int)statusCode,
statusCode,
responseBody.ToString(SaveOptions.OmitDuplicateNamespaces)));
return requestId;
But every time we are getting the below error from the line
response = (HttpWebResponse)request.GetResponse();
<Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>BadRequest</Code>
<Message>The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message>
</Error>
Any help is appreciated.
Thanks,
ShubhenduPlease find the request XML I have found it in debug mode
<CreateDeployment xmlns="http://schemas.microsoft.com/windowsazure">
<Name>742d0a5e-2a5d-4bd0-b4ac-dc9fa0d69610</Name>
<PackageUrl>http://shubhendustorage.blob.core.windows.net/shubhendustorage/WindowsAzure1.cspkg</PackageUrl>
<Label>QXp1cmVFY295c3RlbURlcGxveW1lbnQ=</Label>
<Configuration>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</Configuration>
<StartDeployment>true</StartDeployment>
<TreatWarningsAsError>false</TreatWarningsAsError>
</CreateDeployment>
Shubhendu G -
Sold-to party 1000003 and sales area PECC/10/02 (for ZWEB) are incompatible
Hello,
We're configuring SAP CRM 7.0 ISA with ERP Sales Order.
After login into ERP webshop, the system shows the error:
"Sold-to party 1000003 and sales area PECC/10/02 (for ZWEB) are incompatible"
I've already checked the following:
1) In Shopadmin: Combination of sales Area and Doc type in Webshop- IT's OK;
2) In CRM System: Catalog used has the right sales area combination- IT's OK;
3) In ECC System: If that document (ZWEB) is alowed to that sales area- IT's OK;
Does anyone can help with that??
Thanks & Regards,
Paulo PelaHello Developer,
Yes, I've checked the combinations of webshop(In Shopadmin) and Product Catalog.(Sales Area)
All of them are compatible.
Hey DJ,
When you say: u201Cthe first entry maintained in the USAPPLREF tableu201Du2026.in our case, there are 2 entries for my user (PPELA3). The first one is for object type BUS1006001 and object key nr° 23263-my contact person, linked to sold-to nr° 1000003), which is the employee that I 've created in the ISAUSERADMIN.
The second entry is with object type KNA1 with object key nr° 1000003 (which is the sold-to).
Those are the only entries for my user in this table.
Does this sequence have the influence described by you? Is that what you want to say?
Other point: Does the REFERENCE CUSTOMER is important for the B2B scenario? (Our case) Since I thought it was important just for B2C scenarios, It was the same number in SHOPADMIN Webshop creation.
In the meantime, I will create a new reference customer and change the webshop parameters.
Thanks for your inputs.
Regards,
Paulo Pela -
I dont recall when I have been more frustrated.... the "loops" I am in on the web for support are endless. After downloading Yosemite on my Mac my CS6 no longer works. On your support web site you state the following for downloading and installing previous versions of apps, such as CS6 " 1. open CC for desktop and go to the apps panel (no link is provided so I explored until I could download a trial version of "application manager" as that was required. When I attempted to open it to download "Previous Versions" I could not. I have my license number, my CS6 will not open in Yosemite and after over 2 hours I am really frustrated.... Rich@
When I go to that link, download and then attempt to install I get the message "Webe encountered the following issues, Installer failed to initialize. Please down load Adobe Support Advisor to detect the problem" I then select the link "get adobe support advisor" that takes me to a site that describes a better support link since the one I have been sent to is no longer available. I then go to that site and am told to go to CC for desktop apps, that requires me to download CC... I don't want CC.. just want to have my CS6 PS work again.... so frustrating...
-
My i-phone 5s is not charging because of Sunken pins where the socket is plugged. According Power Mac Center at Green Belt3 even my warranty still open until 30 October they cannot do nothing and refer me to a Toll Free Apple customer Service number in Singapore!!! ..my question for what are they there? not alt all very friendly and helpful!!
Send an e-mail with all this in it directly to Tim Cook. Seriously. You can send e-mail to him.
You might also try this forum here for more ideas: http://forums.macrumors.com/index.php? -
Error MIGO AA629 Balance for transac type group 10 negative for the area 01
Hi
I have the following principal case in the PRD (version 60.0 ECC):
Active 25000549 number was discharged from the transaction MIGO 18/12/2009 USD 19295.22 and began to depreciate on 01.01.2010.
On 22.04.2010 the vendor issues a credit note USD 11626.96 therefore created the Purchase Order number 9900000903 and when it will account for the transaction MIGO get the error message AA629 ( Balance for transaction type group 10 negative for the are). In transaction MIGO are using the kind of movement 161.
SAP looked in and found a related note the following: 497297, 541200, 547233 but they refer to version 4.7 and 4.6C and make no reference to version 6.0.
The error detail is as follows:
Balance for transaction type group 10 negative for the area 01
Message no. AA629
Asset affected: 000025000549-0000
Diagnosis
With the transaction entered, the balance for the transactions in group 10 in area 01 will be negative in this fiscal year. However, the balance of transaction type group 10, according to its definition, must be positive in each fiscal year.
System Response
The system rejects this posting.
Procedure
Check the transaction type, the amount and the fiscal year in your posting. If you want to post a credit memo to an acquisition from the previous year, then use a transaction type for a retirement. If necessary, you can change balance rules after talking with your SAP consultant.
My questions are: someone has thought of something similar? how to solve? must implement the foregoing notes?
Thank you very much for your kind helpHi,
notes 20347 and .302756.
Try to change following customizing temporarily to 160:
IMG->FI-AA->Transactions->Determine default transaction types for
internal transactions->Acquisition from goods receipt
Another alternative could be to TEMPORARILY change the definition of transaction type group 10 so that it allows negative values.
139899 AA629 when posting MR01/MRHR/MIRO invoice receipt
AA629 is raised when the transactions per transaction type group in one year are negative in balance and the definition of the transaction type group only allows positive values (that means TABWG-VZJSAL is '+'). This is the case for transaction
type group 10. After posting transaction I recommend to set transaction group 10 back to its original definition.
Regards Bernhard -
Account determination for posting area Aggr
Hi experts,
i'm very new to ISU and would like your help on an issue.i am using ETHIM to post mass act aggr posting for the serv prov.i get an error *Key selection not defined for application &1, posting area &2* msg no 005..
exact error msg would be *In Customizing, define the keys you require by selecting the appropriate entry for account determination for posting area Aggr.: Conversion of Ext. Transacts. to N(R075).*
what transaction will i have to use in order to post the doc. doc type AL.
thanks in advance
cheers,
deepak raohi Deepak,
FQC0 is the correct t.code and maintain the document type for the posting area
BA: payment settlement
SA: GL account document
just try it out with this.
Regds,
Naren -
I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%) If I move the application window to another screen it adjusts it correctly – leaving all the pallettes, menus and tools correctly sized as they are on the retina display Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see? There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light. MacBook Pro with Retina display, 15", OS X Yosemite (10.10.2), Photoshop CC 2014
I tested both ways. With "open in low resolution" ckecked the size of the images is cool, but it is low-resolution including Photoshop appearance.
If "open in low resolution" is unckecked the appearance is good but the very small size.
See the image below. It has 650 x 732 px, 72 dpi. The font of the text "Neste aniversário ..." is with 18pt.
Maybe you are looking for
-
Graphics Card? CPU? Motherboard??? Very upsetting to have this machine and not be able to set up This great new OS any work arounds? Adde ons that would permit the upgrade A dissapointed twenty year Apple user. : /
-
Wht is UPDATE TASK functionality in CALL FUNCTION??
Hi Experts, Pls. clarify one of my simple doubt that, Wht is the functionality of UPDATE TASK, in following sttement? <i><b>call function 'Z_FM_1' in update task</b></i> I found SAP help as follow, but not understood?? <i>Flags the function module fu
-
Package hunting - help needed.
Hello all - I am new to Solaris and am still trying to get basics down. My problem seems pretty low level but I have not been able to find out how to do the following.... Lets say there is a utility or some command that I am reading about in the news
-
The way that simulation works is a set of nodal equations is constructed, and then the variables of those equations are solved, including the variables requested by the user, such as via the scope or meters, or as probes in the various analyses. Tha
-
Can't use silverlight on netflix anymore; it worked fine 2 days ago, but now no go, any help?
Until this afternoon I was able to watch netflix content trouble free on firefox and then I got this message: Silverlight Installation Problem Error Code: 2103 You have encountered an issue specific to Microsoft Silverlight, the software used to watc