Is It Getting Better or Worse!!!! ?????

Unfortunately for me -- WORSE -- cant even get logged onto BT SPORT now -- keeps asking to log on again and again and again -- such a mess BT -- at least anyone having problems with bt sport can now warn others who may be considering a move to BT -- DONT TOUCH

It's been rubbish since day 1. And it IS getting worse, MUCH worse. It's clear BT don't care one iota. They don't seem to understand there's only one thing worse than NOT getting something extra with your broadband, and that's getting something extra that you REALLY want, and it not working. They're gonna lose a lot of disgruntled customers.

Similar Messages

Is 2.1 better or worse for you?

I was having so many problems with the iPhone that I was getting ready to toss it for a different brand. The phone would lockup almost daily and I would have to do a restore which took over 3 hours each time. Plus, I had many of the other problems that others have reported. But, I was hoping that the new firmware would make a difference and it did. I am running Vista and I updated to iTunes 8 then updated my iPhone to 2.1. I was amazed at the difference in performance. Here is a list of Before and After the upgrade.
Before, installing or updating apps took 10 minutes. After, it only takes 15 seconds.
Before, deleting or updating apps would lock up phone. After, it has not locked up once.
Before, backup and sync would take up to 2 hours. After, it takes 3 minutes.
Before, the keyboard was slower than molasses. After, there is no lagging.
Before, battery life (at 10 percent remaining) was less than 4 hours. After, it is over 5 hours.
I am sure there will still be some problems I have not found yet. And I am still waiting on some upgrades like cut/paste, landscape keyboard, doc edit app and other things. But, most of those things and more will be coming. For now I am much happier with the iPhone than I was a few days ago.
So, how did 2.1 work for you? Better or worse than before the upgrade?

I think this install may have done the trick.
The long, stupid long, crazy synch times seems to be resolved.
I have the original iP. On 1.4 everything was smooth. Afterwards, backing up and sync was ridiculous.
I just plugged it in to test. The entire process had to have been under 2-3 minutes.
I seem to be getting more bars too.
Also, the plantronics voyager headset I just bought wouldn't play VM through it (there are threads about that problem) but now it's fixed.
Before this update (all update after 1.4) I've had problems w. 4 iP's--constantly freezing, going to the apple screen, dropping calls etc. I've replaced the SIM card and w. this update (so far) things seem to be all good.

How to setup airport time capsule to get better performance?

I need to set up my wireless system with my new Airport time capsule 3T as primary base station to get better performance, and If I have a cable modem as primary device to get the signal (5MB) from the ISP then my network has one, Macbook pro, Macbook air, mac mini, 2 ipad's, 2 iphones, but neither of them is connected all time.
What is the best way to do that?
What wifi channel need choose to?

What is the best way to do that?
Use ethernet.. performance of wireless is never as good as ethernet.
What wifi channel need choose to?
There is no such thing as the best channel..
Leave everything auto.. and see if it gives you full download speed.
Use 5ghz.. and keep everything up close to the TC for the best wireless speed.
If you are far away it will drop back to 2.4ghz which is slower.
Once you reach the internet speed nothing is going to help it go faster so you are worrying about nothing.

How do I get Better Investing magazine on my iPad?

How do I get Better Investing Magazine on my ipad?

iTunes 11.1 is for Macs and PCs.
Are you trying to upgrade your iPad to iOS 7?

If I host with Business Catalyst, will search engines fine me any "better" or Worse than go daddy?

If I host with Business Catalyst, will search engines fine me any "better" or Worse than go daddy?
I am new to Muse and love it! Not sure if the hosting site matters one way or the other.

Liam has some great points. Some other things to consider is that google (just talking one search engine at the moment) more than likely know what a BC site looks like and is made of and would know the best ways to index it assuming you use some of the features of BC and not just straight up HTML.
Godaddy is straight up HTML so as far as indexing goes I think BC has an advantage as it is a known system much like wordpress.
As far as IP blocks, bad neighbours, etc only google will know that information and it's not easy to say which is better.
For example if someone on BC spam's there website everywhere or engages in dodgy SEO practises, spambots etc. Their site is going to be pushed down, if you happen to be on the same IP or close to that site you will be in a "bad neighbourhood" and it may affect your site in the short term. This is the case for ANY hosting solution, so take it all with a gain of salt.

How to get better resolution on Blu-ray (1080/60i)

I'm experimenting with my new AG-AC160A camcorder and have been shooting youth hockey games in AVCHD mode, 1080/60i, 1/120 shutter, manual gain and white balance set appropriately, and florescent scene file setting due to lighting in rink. I have PP CS5 and am disappointed with the relative lack of HD-crispness when the Blu-ray output is played on my HD LED set. I used the above settings based on recommendations I saw in the forum somewhere. Any suggestions on what I can try differently? Thank you.

To elaborate on Ann's great advice, the Sequence preset you should be using is AVCHD 1080i30 (60i).
A good way to start out with the correct sequence is to import your clips and then drag one onto the "New Item" icon at lower right of Project Bin. This will create a new sequence to match the source material automatically. As Ann mentioned, you have a non-HD preview format, so if you rendered the timeline to green, and checked "Use Previews" on the final export, then your Blu-ray could have "SD quality" footage in it!!
Curious why the 1/120 shutter, hoping to get better action motion?
If you have a current timeline using the incorrect settings, go ahead and add a NEW Sequence with correct settings, open original sequence and "Select All" which is CRTL + A, then CTRL + C to Copy. Then go to the proper AVCHD sequence and Ctrl + V to Paste entire contents. You will now have the edited sequence moved into correct sequence settings. Now use Export and in AME choose "H.264 Blu-ray" and choose the 1080i preset and export, then use results in Encore. The Blu-ray should look excellent when done correctly.
When exporting from AME, do NOT check the box for "Use Previews", as you want to encode direct from original source and skip any intermediate render clips.
Thanks
Jeff Pulera
Safe Harbor Computers

How to get better perform here

hi there,
bellow code is using with in the loop. how can i modify to get better performance.
SELECT knumv kposn kwert FROM konv
                                INTO CORRESPONDING FIELDS OF lt_konv
                                 WHERE knumv EQ lt_output-knumv
                                 AND kposn EQ lt_output-posnr
                                 AND kschl EQ 'VPRS'.
        COLLECT lt_konv.
      ENDSELECT.
thx in adv.

the better solution for the select statement whould be to use the aggreagte function sum for the field kwert:
SELECT knumv kposn sum(kwert)
             FROM konv
             INTO CORRESPONDING FIELDS OF table lt_konv
             WHERE knumv EQ lt_output-knumv
                   AND kposn EQ lt_output-posnr
                   AND kschl EQ 'VPRS'.
The select is inside the loop an lt_output.
Aggregate functions and FOR ALL ENTRIES can not be combined, the
FOR ALL ENTRIES is a select distinct !!!
So you must leave the loop around the select and you can't use the FOR ALL ENTRIES, but this is o.k.,
Siegfried

How to get better resolution on graphical borders in Pages?

When using the «line effect» on a picture frame and choose a «image border», these borders a very pixelated and low resoltion when i.e. printing on a quality printer. Seems to be only screen resolution (100-150 dpi)? Is this a bug in Pages – how to get better resolution for these borders when exporting for example to PDF?

Here you see the issue. The Document's size is A6 landscape, means 14.8x10.5 cm, and it prints and shows really pixelated

How can I get better video quality using my appleTV

I have an appleTV (1st) and I want to get better quality from youtube videos, What should I do ?

Welcome to the Apple Community.
YouTube video does not come from the main YouTube site, it is specially encoded for the Apple TV and other devices that don't play flash. Generally quality is fixed with no way to adjust it and is often restricted by the quality of the video that has been uploaded.

Re: On 105 mbps plan but never get better than 22 mbps

I am living in this SAME nightmare! Help. I spent ALL day yesterday 8 hours on the phone with many many different people, some who were just plain RUDE and others who all contradicted each other. Sent me to get a new modem and we did that, speed still like the above.Called today, got a decent guy he tried helping for a while then phone cut out. No call back.UMMM really? Then yesterday during Chat, they guy just shut me off.I have 105 per my preferred bundle. Really want to get that. SOOOO Angry, if they did NOT have MONOPOLY on my community I would switch. I however have NO one to switch to. SO unamerican. Poor service, HIGH prices. I left service center in tears as I watched elderly couple hobble out on their canes wondering how they can pay the increase to their bill. That is just NOT right.

X1DESMO wrote:
I just got the same svc hooked up today and I too am only gettign mid 20's ?!?!? Using my own modem Motoroal SB6121 ( certifed on the Comcast site to work with even the 150 speed tier.. And a Neggear N300 router ( capable of over 300MBs) and only mid 20's Seriously?... I get 25 upload??? Go to my parent s place they have the Comcast provided Modem router combo unit ( also wireless N) and the 50 MB svc, I get a solid 62 over there witht the same laptop and ipad. WHAT GIVES? The technition made a comment that has me very concerned.. " I have NEVER seen anyone with the Extreem 105 pkg get better than 50 over Wi Fi, even with the COmcat modem in the same roon." This I will be looking into ove the next several days, as that is a totally unaccepable answer, we pay for 105 ALL of our equipment is rated to levels ABOVE 105 and we cant get HALF of that... Soory Comcast this wont fly, if that is in fact "just how it is" I see a class action suit coming there way for sure as its blantant fals advertising. If/and/or when I get it solved i will be sure to post up here..Try this: http://forums.comcast.com/t5/Basic-Internet-Connectivity-And/Connection-Troubleshooting-Tips/td-p/1253575

Setting my system in order to get better results in burning the SD AND HD

I need help with setting my system in order to get better results in burning the SD AND HD DVDs
here are my system details:
Camera : SONY HVRZ5U
COMPUTER SYSTEM: MAC PRO 10.6.6
SOFTWARE: FINAL CUT PRO 7
Question #2:
My camera has a built in Firewire output, do I need a AJA capture card for my Mac PRO?

I have a Z7u, Mac Pro running 10.6.5, FCP 6.0.6
You can capture HDV via Firewire. Make your preset HDV and edit in that timeline. But I would set the RENDER as Pro Res.
I have an AJA IoHD so I capture as Pro Res. Probably a better way to go, but certainly not necessary if you don't have a dedicated capture card.
After editing I take the resultant exported edited,self-contained .mov into compressor to make the mpeg2 and ac3 to take into DVDSP. These are SD DVD's. They come out just fine.
What don't you like about your results?

How do I get better resolution on my ipad2 camera

How to get better resolution from my ipad2 camera

The resolution of the camera is tied to hardware not software. As James Ward4 said, keep the lens clean and shot in the best lighting possible. Shooting in dim light is the same as any other point and shoot camera. The camera will try to compensate by slowing the shutter down so you will probably introduce camera shake into the mix which will blur the image unless you have the iPad stabalized on some type of tripod or camera mount.

RSSI... can i get better than -80 dBm ???

i would like to know if i should be able to get better than RSSI = -80 dBm (signal strength)... i have four bars (usb ec168 modem) whenever verizon is running at it's best here in northeast oklahoma... a former alltel region... my understanding is that RSSI = -80 dBm is the level that is described as "good enough for Rev A / evdo"...
in my research of this subject googling all over... i find that some people will get RSSI in the 70s and 60s... lower being better / stronger signal... can someone tell me why i cannot get these kinds of levels since i often have four bars showing 90-100% ???
when my RSSI drops to less than -80 dBm... higher values such as -85, etc... this is when my evdo drops to 1xrtt and even DO...
appreciate any enlightenment on this subject... thx!
*obviously, verizon (if you are listening...), since i am paying for 3g broadband... i would like to have 3g broadband, rather than the 1xrtt and DO that happens so very often, evenings, during the week!

Understood. Actually, if you mean the towers are neither VZ or Alltel because the carrier name is not listed, it won't be. Your service may not be from a tower per se either. If there are antennas in the area, that may be where your signal is from.
The towers are listed by the owner and the carriers lease space on them along with the antennas. The sure way to tell is to use your cell phone if you have a VZ phone and do a field test with it since you have a desktop and cannot move it about. The closer you get to the "site" of your signal source, the stronger your signal. evdoforums.com can assist with a list of codes for each brand of cell or smartphone to help you determine this. I also have this if you may need.
Actually, -80dbm is not a bad signal and from my experience, a small percentage get better than that. The best possible is -50.
I wonder why this is even an issue since you have not reported any problem with speeds, connection or any problems that may be associated with the signal strength. If there truly are only 3 towers and no antennas in your area then the reason is more than likely due to congestion.
I have also discovered that the signals, connections, etc. are all improving and doing an update for your PRL if that is possible through your software may just be the fix.
However, if you are insistant on spending money on antennas and/or amps, etc. when the signa isn't anywhere near abnormal, that is your choice. Keep this in mind if you do, you may not have a gain in more than 10 dbm if you have any at all.
So have a great day and good luck.

Help - WRT400n how do I get better hard wired speeds

I wanted to get better speeds while playing on-line on the PS3. I bought the WRT400n router (I had the WRT54G) and it seems to be working ok. I just hardwired the ps3 and the speeds are a little slower. Wireless I was getting 12.0 Mbps down and 1.0 Mbps up, now wired I am now gettiner 10.0Mbps down and 2.0 Mbps up. I numbers are lower wired, how come? I have a new Cat 5 cable and I just had a direct cable dedicated to the router put in. I thought I was going to see much better speeds. Can anyone help me out? I am very confused about the the speeds. People were telling me when I hardwired I would get get speeds up to 50 to 100. What am I doing wrong?
Thanks..............

On your Router setup page, below change the MTU size to 1365 and below click on Save Settings, then click on the Wireless tab and below change the Wireless Channel to 11 and click on Save Settings, then click on the sub tab under wireless "Advance Wireless Settings" and below Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Once you are with this settings, then click on the 'Security" tab and below Uncheck "Block Anonymous Internet Request" and click on Save Settings...
Now unplug the power from the Router and Modem,wait for 30sec and then first plug the power to the Modem and once all the lights are solid then plug the power to the Linksys Router. Now you can check the speed on your XBOX.

Help - WRT400n how do I get better hard wired speeds on PS3 and Xbox 360

I wanted to get better speeds while playing on-line on the PS3. I bought the WRT400n router (I had the WRT54G) and it seems to be working ok. I just hardwired the ps3 and the speeds are a little slower. Wireless I was getting 12.0 Mbps down and 1.0 Mbps up, now wired I am now gettiner 10.0Mbps down and 2.0 Mbps up. I numbers are lower wired, how come? I have a new Cat 5 cable and I just had a direct cable dedicated to the router put in. I thought I was going to see much better speeds. Can anyone help me out? I am very confused about the the speeds. People were telling me when I hardwired I would get get speeds up to 50 to 100. What am I doing wrong?
Thanks..............

On your Router setup page, below change the MTU size to 1365 and below click on Save Settings, then click on the Wireless tab and below change the Wireless Channel to 11 and click on Save Settings, then click on the sub tab under wireless "Advance Wireless Settings" and below Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Once you are with this settings, then click on the 'Security" tab and below Uncheck "Block Anonymous Internet Request" and click on Save Settings...
Now unplug the power from the Router and Modem,wait for 30sec and then first plug the power to the Modem and once all the lights are solid then plug the power to the Linksys Router. Now you can check the speed on your XBOX.

Is It Getting Better or Worse!!!! ?????

Similar Messages

Maybe you are looking for