Is it going to be possible for me to keep Firefox 3? How and for how long?

I don't like the way Firefox 4 looks and works. Hate it. I don't want to have to deal with it, so I always tell it no when it tells me to switch from the latest version of 3, but today it switched over to 4 on it's own.
Don't try to convince me that Firefox 4 is better, I just want to use the one I've been using.

Go to [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.17] and download it to the desktop.
Then go to Add/Remove Programs, scroll down to '''Mozilla Firefox''' and remove it, choosing to keep your bookmarks, customizations etc., (don't checkmark the box).
Then reboot and delete the folder called '''Mozilla Firefox '''at this location: C:\Program Files\Mozilla Firefox
Finally run the installation file you downloaded to the desktop earlier.
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.
After you complete the installation, go to the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page and update those where necessary.
However, before you go that route, here are a few tips to make FF4 look like the previous version.
* Right click a blank part of the tab bar and click "Tabs on top" to remove the checkmark. Tabs will subsequently reappear below the search bar.
* Repeat the same steps, but click the top one called "Menu bar". This will reinstate the text links at the top.
* To rearrange the layout, repeat the same steps again and choose "Customize". A panel will open and while that remains onscreen, you can move elements like toolbars, buttons etc around and place them anywhere you wish. You can also drag anything you don't like into that panel and add anything you want by dragging it out of there.
* To replace the status bar at the foot of the page, install this add-on: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/
Firefox 3.6.17 will be supported for a while yet, but will eventually fall by the wayside.

Similar Messages

  • How can I download Facebook Photo Album Downloader (FacePAD) with Firefox 4.0.1? If it is not possible, could I downgrade my firefox?how?

    Hello,
    I'm trying to download FacePAD in order to download albums in facebook. I'm new in firefox and I'm unable to download facePAD because each website I find says that it can't be downloaded with firefox 4.0.1 (my version).
    Can someone help on this?
    Thanks

    See ''tmaca's'' post, 3rd one up from the bottom. He seems to think you can update it manually: https://support.mozilla.com/en-US/questions/822003#answer-184670
    Officially though, we're still at this stage: [http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-product-compatibility-with-Firefox-Updates/m-p/443808 Norton product compatibility with Firefox Updates]
    If you want to revert to the previous secure version, do the following.<br><br>
    Go to [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.17] and download it to the desktop.<br><br>
    Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (don't checkmark the box).<br><br>
    Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox<br><br>
    Finally run the installation file you downloaded to the desktop earlier.<br><br>
    Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.<br><br>

  • How long does it take for an iPhone to be fixed?

    Im going to be sending my iphone out to be repaired, how long can i ecpect it to take?

    In my experience they didn't repair it. They sent a replacement the next business day.

  • Mac: With my user profile, it is not possible for me to announce me to the Creative Cloud, with a different user profile, it goes without problems.

    With my user profile, it is not possible for me to announce me to the Creative Cloud, with a different user profile, it goes without problems. Creative Cloud Desktop has been uninstalled and reinstalled. There is no error message.

    john beardsworth wrote:
    John Waller wrote:
    However, Adobe will soon introduce Cloud only features into Lightroom CC for which LR6 (perpetual license) owners will have to wait until LR7 (paid upgrade).
    That is possible, John, but it is only speculation on your part. Might, not will.
    kwdaves wrote:
    There is a "Lightroom 6" upgrade available for US $79 if you have a valid license for any of the earlier versions. From what I can tell, the only difference between Lightroom 6 Full, Lightroom 6 Upgrade and LightroomCC is in the license. The download file is the same.
    Other differences - with CC you get LrMobile/LrWeb and they throw in a free copy of Photoshop too.
    Yes, but when I bought my standalone license and clicked on the "Download" button it took me to the LightroomCC page. The downloaded file is named Lightroom 6, but in the CC app the installed program is LightroomCC (2015).

  • Is it possible for Apple to unlock my iPhone?

    My iPhone apparently has a SimLock for Vodafone Germany. My two years of contracet with Vodafone Germany (required minimum time to be able to get it unlocked from Vodafone) are over.
    Now my problem is as I had my iPhone swaped at the AppleStore so Vodafone can not unlock my iPhone because it is not an IMEI that they have in their systhem. Apple tells me that I have to talk to Vodafone. Now what Vodafone suggested is that they send me a certificat saying that I can have my iPhone unlocked and that I go do it at the AppleStore if that is possible. So that is actually my question: is it possible for me to get y iPhone unlocked at the AppleStore with the certificat from Vodafone?
    Thanks for any help
    And one other thing... I was on an Apple site (I can not find it anymore) where I was in contact with an Apple support member via Chat. Does anyone know how to get to that site?
    Thanks again

    Apple cannot unlock your iPhone via any "certificate". The only way it works is that the carrier generates an electronic unlock authorization which goes though Apple's automated process to get sent to iTunes on your computer. Sorry, but Vodaphone will have to figure out the IMEI issue on their end, and if they can't, then you probably will not be able to get your iPhone unlocked.
    Regards.

  • Is It possible for a Non Shippable Inventory Item sold in OM update INVENTORY Levels

    Is It possible for a Non Shippable Inventory Item sold in OM update INVENTORY Levels?
    I have created an Item which is inventory tracked but not shippable. Customer & Internally Ordered. But upon booking the Sales Order, the INVENTORY level of the said item does not get updated with the sale.
    How can i make it update INVENTORY without going thru shipping module?
    thanks.

    Hi Jay
    How are you.
    Yes, in process sampling only.
    Is it not neccessary to have a wip validity rule for wip products in the specs. I am able to create samples for wip products with inventory validity rule.
    Regards
    Prem.

  • Is it possible for a 3rd party program to create a list item in sharepoint online 2013?

    I have limited experience with the online version of sp. I've been asked if it's possible for a 3rd party app that our company is beginning to use, to programmatically add items to a list.    I don't have any details about the program yet,
    but I've been told that a batch would run at night and they would like it to create items in a SP list and pass along several fields of metadata.   
    Is this possible in the online version?   I know that Power Shell can do this, but is it possible for an app to get access to run a PS command?   
    thanks,

    Yes.
    There is something known as the Client Side (?) Object Model or CSOM. This allows you to create list items, lists and even sites with .Net code from a non server machine.
    You could run 'classic' Server Object Model  C#/VB.NET or PowerShell to do the same job and it might be easier as there's alot more material out there on how to do it. On the other hand it's probably going to make your solution more complicated and
    harder to maintain over the long run.
    This article introduces you to the CSOM and how to use it and is applicable to O365 as well as on-premise:
    http://msdn.microsoft.com/en-us/library/office/fp179912%28v=office.15%29.aspx
    As an alternative you can look at the REST API which allows you to use web services to interact with SharePoint.
    http://msdn.microsoft.com/en-us/library/office/fp179912%28v=office.15%29.aspx

  • Goods receipt not possible for delivery 800001597: error code 4

    Hi,
    When doing goods recipt for outbound delivery in MIGO, I am getting the below message:
    Goods receipt not possible for delivery 800001597: error code 4
    When going in details of error messgae:
    For error 4 : Check the delivery and its document .
    Document flow is as below:
    Step 1. PO Created
            2. Delivery created with ref to PO
            3.Picking
            4. Shipment Created
            5. Goods Issue complete.
    Now what i have to check.
    Thanks in advance.
    Regards

    Check the link Re: MIGO
    Also check OSS Note 458770 - GR for outbound delivery shipping units with batch split and Note 314765 - M7865 during GR f. delivery w/ default values 102 if it applies to your SAP version.
    Regards

  • No goods receipt possible for purchase order message number# M7036

    Hello,
    We are working in 4.7C , Created the scheduling agreements, with Shipping notification(Inbound delivery)   .
    Created the Scheduling agreement on 25.09.2009 and created the schedule line one same day with date 25.09.2009, (time column Blank).
    So in Practice for Goods receipt we are using MB0A t code for GR,(not using MIGO)..while MB0A..iam going to make GR with ref to Shipping notification then system will through below given message.
    No goods receipt possible for purchase order
    5500001447 0001
    Message no. M7036
    tried every thing but unable get. shar your views
    Regards
    Sapman man

    Hi
    If you use Shipping notification then you have to create inbound delivery VL31n and do the PGR in inbound delivery  VL32N itself.
    Incase of scheduling agreement schedule lines you have to make sure the following
    1) Schedule line delivery date shoud be todays date or in the past
    2) Schedule must be released by using message type based on the type of schedule ( Normal, JIT or forecast)
    Hope it helps
    Thanks/Karthik

  • Is it possible for me to script Illustrator to save as PDF and attach to email ?

    Hi,
    I am after a script to save my current working file as PDF (with some settings) and then bring up a blank outlook email with that file attached ?
    I do a lot of artwork and have to get it approved, I am getting bored of manually saving to PDF then going to find the file and then clicking send to > mail recipient etc etc
    You know the drill guys.
    So would it be possible for me to just run a script that does all that for me ready to insert the persons name or even add the persons name within the script ?
    thanks
    Lee

    Well, as the kids' paper-crafts book I used to try to put together which frustrated the hell out of me, mockingly read on the bottom of the instructions: "ТЕРПЕНИЕ И ТРУД ВСЕ ПЕРЕТРУТ"
    That is, patience and perseverance will overcome all. 
    To use the below, you've gotta get Autohotkey_L, I believe, and it's not that hard to use.. but it takes some time to learn the various things if you want to write your own ones like this:
    {{YOUR_OWN_HOTKEY_HERE}}::
      MyTempFile = C:\Users\{{YOUR_USER_NAME}}\last_proof_sent.txt
      Run {{YOUR_JSX_SCRIPT}}.jsx                                                  ;Save the PDF proof - the script needs to write a temp text file in a place somewhere, which writes the full name of your saved PDF!
                                                                                                              ; I called my temp text file "last_proof_sent.txt"
      CurrentDateTime := A_Now                                                        ;get current time
      sleep, 500
      FileGetTime, FileTime, %MyTempFile%                                              ;get mod date of this temp file
      TimeCounter = 0                                                                                ;initialize time counter for waiting for PDF to save
      While(CurrentDateTime > FileTime and TimeCounter < 1000)                    ;waiting period to see if temp text file has updated since start of this script
      sleep, 20
      TimeCounter++
      FileGetTime, FileTime, %MyTempFile%                                                      ; each time get the modification date of the temp text file
      If(CurrentDateTime < FileTime){
      FileRead, MyPDFFileName, %MyTempFile%                                                  ;read the contents of temp file for location of PDF file path (It was written there by your JSX script, hopefully)
      If Not ErrorLevel{
      m := ComObjActive("Outlook.Application").CreateItem(0)
      m.Subject := "Greetings to all"                                                                      ; <---- Subject -----
      m.To := "address here"                                                                                    ; <---- Recipient -----
      m.HTMLBody := "email body"                                                                          ; <---- Email message body -----
      m.Display
      m.attachments.add(MyPDFFileName)                                                             ;  This is the attachments!
      } else {
      MsgBox, Error Reading the temporary file %MyTempFile%
      } else {
      MsgBox, "Sorry, action timed-out."
    return
    *** I have tested this on one file where I had a test folder on my desktop.  The ExtendScript likes to put the file path like "~Desktop/", but I used myFile.fsName to get the full "C:/Users/Me..." name in case it was gonna be confusing to AHK.

  • Is it possible for the Ipod 4th Generation to get IOS 7?

    Hello all,
    I was just going to ask is it possible for 4th generation Ipod Touch's to get IOS7? as many of the new iphones and ipod nano's have accessed this new software except this version of the Ipod.
    Please get back to me as soon as possible,
    thank you,
    From Amy

    No.
    As Apple said in June, iOS 7 is not compatible with the 4G iPod. Not enough RAM
    All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB

  • Drop Box - possible for  other user to monitor progress?

    Is it possible, for the user whose Drop Box I am tranferring files to, to monitor the progress so they can tell when an upload is complete to their Mac?
    I get the progress window on my end, but they have no idea what is going on on their end.

    Pretty difficult, iirc the Filesize required is reserved at the start, so Get Info wouldn't help.
    Perhaps they could use Activity Monitor to observe the Network IN activity?
    Most likely someway to monitor it with a Script, but beyond me at the moment... Maybe Sharepoints with AFP Monitor!
    http://www.hornware.com/sharepoints/

  • I have 160gb of music on my Classic, 6th Gen (I think) I've just bought it. Is it possible for it to play my songs in a random order, one or two from different albums?

    I have 160gb of music on my Classic, 6th Gen (I think) I've just bought it. Is it possible for it to play my songs in a random order, one or two from different albums?

    To add to what Stonerock has mentioned, you can either create Playlists in your iTunes Library, containing exactly what you want, and then Sync them to your iPod, or you can use the iPod Classic's On-The-Go feature.
    Reading between the lines, I'm going to assume for now that you want to be able to create your preferred listening list while "out and about" - so not near your iTunes library. (You have posted in iPod Classic, after all.) You can do this with the On-The-Go Playlist.
    Look in the Playlists menu on the iPod. It probably contains the Recently Added, Recently Played and other pre-made Playlists that you see in your iTunes Library. At the bottom of the Playlists list, is the On-The-Go showing 0 Songs. Scroll down to it and press the Select (centre) button. The screen will give you instruction on adding songs to the On-The-Go Playlist.
    Basically, if you press-and-hold the Select (centre) button, while highlighting a song, the song title will blink as it is added to the On-The-Go Playlist. Try it, then go back to Playlists/On-The-Go and notice that it will now say 1 Song. (Note, you cannot add a "now playing" song to the On-The-Go Playlist.) Repeat this for every song you want to have in the list. You can also look in the Albums menu, highlight the album title and press-and-hold that to add the complete album to your On-The-Go Playlists with one press. So if you add the two albums to your On-The-Go Playlist, you can then listen to just those two albums.
    To shuffle the songs, turn on Shuffle on your iPod. Either, go into Settings/Shuffle and press the Select button to toggle between Off/Songs/Albums, or on the Now Playing screen, press the Select button three times to reach the Shuffle option, where you use the scroll wheel to move between Off/Songs/Albums, press the Select button to activate it.
    Having added songs to the On-The-Go Playlist, go into it and notice the list of songs and options to Save Playlist (New Playlist 1) or Clear Playlist. If you use Sync to manage your iPod (and that really is the best way by the way), the next Sync will transfer any unsaved On-The-Go and any New Playlist Xs that you have, back to your iTunes Library. You can even remove any song from the current On-The-Go Playlist by highlighting it (in the On-The-Go, obviously) and press-and-holding the Select button.
    If you need assistance in creating a Playlist in your iTunes Library, please ask.

  • Which mac mini should i go for: the one with AMD graphic card or Intel. I meanly going to use it for hometheater and HD movies.

    which mac mini should i go for: the one with AMD graphic card or Intel. I meanly going to use this for hometheater and HD movies.

    Intel HD 3000 graphics card can easily handle HD movies up to 1080p. But if you are looking at higher resolutions possibly 4k or 8k that are being released this summer in new TV's, I would go with the AMD card. The AMD card would be good for video and picture applications and also games. But if this is strictly to power your 1080p home theater setup then the choice is obviously the Intel HD 3000.

  • Is it possible for an ipad camera  to have a virus?

    On my ipad a message opened it said your " ipad camara has 3 virus,If you want to remove this virus you can click below" it also said  if you don't do this your ipad camera photos might be hacked .is it possible for an ipad camera to have a virus please respond and leave tips to remove this virus

    This is just a website scam that's going around right now. It cannot infect you in any way.
    Some people have reported being directed to the App Store to download a particular camera app. If you are, do not download it. It cannot infect you with anything, but you don't want to reward the scammers by downloading their app. If you downloaded the app and paid money for it, contact Apple to dispute the charge.

Maybe you are looking for

  • Operator IN and variable string

    Hello, I have this sentence sql (it is a example): select p.pa_cod_proyecto, p.pa_tit_proyecto from spa_pa.pa_proyecto p, spa_pa.pa_rel_proyecto_persona rel and rel.pa_cod_proyecto (+)= p.pa_cod_proyecto and (rel.pa_prlogin in (:p21_participantes)) w

  • Software update - 1.2.1?

    I own a 60 Gb 5th gen iPod. I did not upgrade it yet to iPod software 1.2.1 - still using 1.2. A friend of mine who has the same iPod told me not to upgrade. He had many problems with the new version (sound and sync issues). Did any of you encounter

  • Alternate api's in ep6.0

    hi Can someone tell me what are the alternate api's in ep6.0 which we can use in place of the follwing ep5.0 api's com.sapportals.portal.security.usermanagement.AbstractBackendConnection com.sapportals.portal.security.usermanagement.IModifyLogonDataB

  • Gmail error "The user name or password for Gmail is incorrect"

    Starting the other day I am getting the above error when I try to access my gmail account on my iphone4 and I get the same error on my iMac. This is the 2nd or maybe 3 time this has happened. The last was exactly month ago. Also keep in mind I can ac

  • 30EA1: "Connection" panel behavior on clicks of twisties and object names

    EA1 on Mac OS X. SQLD's schema object tree has always been a little frisky in these ways: * If i click the twisty (icon to the left of an object or category name) SQLD acts as though I asked it to do the default action on the object to the right of t