Is It Going To Take This Long?

It's a 10 minute movie and it says it'll take this long...
And it keeps going up. Will it take this long? Is it a glitch?

I think that the 'time remaining' number is purely mathematical and is related to the speed of the process as it is interpreted every few seconds. If your movie has some stills, the process is faster and the number goes down a bit; when it is compressing a long video clip, the number rises. Sometimes I see a very high number initially, but then it goes down to a more reasonable time. I have an Intel duo processor and find that the time given is faster than when I did this on my G4. My movies are usually about 1hr55 min, and usually it takes about 3 hours to share as a Full quality QuickTime movie.

Similar Messages

  • Trying to restore my iPhone 5 from a backup but its says that it will take over 24 hours to finish. Is there something I can try to do to speed this up? I feel like it shouldn't take this long

    So I have been restoring my iPhone5 from a backup for about 3 hours now however iTunes still says that it is going to take over 24 hours to complete the restore process and the progress bar hasn't moved much at all. I feel like something has gone wrong somehow and it shouldn't take this long to complete. Is there something I can do to speed up this process or do I just have to try to wait it out? I'm scared to just unplug my phone and try again since it might screw something up.

    if u unplug then that could put ur device into recovery mode. i would wait

  • Does backup take this long or is it frozen? (iOS 5)

    I am attempting to update my iphone 4 to iOS5.  I already installed itunes 10.5, restarted it.  Plugged in my iphone 4.  It says its "backing up." However, the progress bar hasn't moved in the last 30 minutes.  My iphone says "sync in progress"  Is it frozen??  Does backup usually take this long?  This is the second time I have tried this.  last time, I tried clicking the "x" to stop the backup process, but nothing happened for the next 40 minutes.  Then I tried  "slide to cancel" on my iphone, got to the home screen, but itunes said it was still backing up!  So this is my second time trying this.  Please help! What's wrong? What can I do to fix it?

    I just exported a self-contained QT file without converting it to reduce the size and it only took maybe 5 minutes if I remember correctly. Unfortunately, the file size was 13 gigs. Too big for a DVD<<</div>
    Of course it's too big for DVD. DVD-Video is highly compressed MPEG-2. Take you self-contained movie and use Compressor to encode the file into MPEG-2 video and AC3 audio, then import those files into DVD-SP for authoring.
    - OR -
    Import the self-contained movie into DVD-SP directly and let it do the encoding after you've authored the disc.
    - OR -
    Import the self-contained movie into iDVD and let it do the encoding/authoring with it's consumerish one-button approach.
    Am I going about it correctly and just need to have patience? Or is there a more efficient means?<<</div>
    Patience is always a good thing, ESPECIALLY when rendering or encoding an 80 minute video from one format to another. But what you really need is a better understanding of the DVD creation process; it isn't as simple as exporting from FCP.
    -DH

  • TS2529 "Waiting for changes to be applied" has been showing for over 2 hours after I selected "Automatically Backup to this computer", then hit Apply.  Is it stuck or does it take this long??  Trying to fully backup my iphone 4 before adding it to my new

    I just bought an iphone 5.  I came home to backup my iphone 4 to my pc (Windows 7).  I transferred purchases, then selected "automatically Backup", then clicked on "This Computer", saying a full backup would be stored on this computer.  that was almost 3 hours ago.  the slanted lines are continually moving across the to and the circle with arrows is still revolving on my phone and beside my device name on the side toolbar.  Is it stuck or does it really take this long?  My 16GB phone is almost full, so there's not a lot of empty space available.  I want to stop it but I'm scared I'll lost the info on my phone.  I do have it backed up to icloud, but that doesn't get everything, does it?  Help please!  I'm not real computer savvy, or itunes savvy, so please speak plain talk!  Thank you!

    MAVERICKS  - That (Syncing), Sinking Feeling!  ……….  This Fixed Mine……..……….
    iPad, iPod not syncing on Mavericks…. I-Tunes freezing on connection of same to the usb port!  The following fixed these issues on my MacBook Pro running 10.9.3.  I do have Xcode on my laptop, but have never used it….  I’m not a programmer or hacker, just a cheesed of Apple fan.  I tried many of the already suggested possible fixes and nothing helped. Got fed up using the disk repair utility and getting no further on.
    I opened System Preferences, Security & Privacy/Privacy.  In Accessibility, after having scanned all my files many times, I added the following apps, some of them may be developer tools from Xcode, and gave them all control….. then did a computer restart.
    AppleMobileDeviceHelper.app
    AppleMobileSync.app
    ARDAgent.app
    Automator Runner.app
    CalendarFile Handler.app
    CMFSyncAgent.app
    CoreServicesUIAgent.app
    File Sync.app
    FileSyncAgent.app
    Image Events.app
    iTunes.app
    Migration Assistant.app
    Syncrospector.app
    SyncServer.app
    UnmountAssistantAgent.app
    USB Prober.app
    I suspect it was probably overkill, but it worked.  My iPad and iPod are visible and syncing as normal in iTunes.  The program is running normally. hope it helps everyone………
    HappyScotsLass

  • I turned off my fire vault by accident and is there a way to stop it from decrypting cause that is going to take a long time and i want to keep my hard drive encrypted

    I turned off my fire vault by accident and is there a way to stop it from decrypting cause that is going to take a long time and i want to keep my hard drive encrypted.
    is there a way to stop it in the middle so it does not go through the whole process

    It's called, "FileVault." If there is no option to stop the process, then the best bet would be to wait until decrypting is finished. Otherwise you run the risk of borking the whole thing. It's hard to imagine how you can accidentally turn off FileVault.

  • An app continues to say "installing" when nothing is happening.  It has been several hours now.  It's only a book so should not take this long.  I have tried deleting it and that did not work.

    An app continues to say "installing" when nothing is happening.  It has been several hours now.  It's only a book so should not take this long.  I have tried deleting it and that did not work.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • I am upgrading to 10.8.3 snow leopard and it has been 3 hours with a white screen - is it supposed to take this long?

    I am upgrading to 10.8.3 snow leopard and it has been 3 hours with a white screen - is it supposed to take this long?

    Welcome to the Apple Support Communities
    It looks like your MacBook Pro is restarting. Just hold the Power button until your computer turns off, and then turn it on again, so OS X should start properly

  • I have been downloading the trial version for twenty minutes. Does it take this long or should I abort and try again?

    I have been downloading the trial version for twenty minutes. Does it take this long or should I abort and try again?
    Thanks!
    Anthonygio

    You should try it with rubbish Australian so-called "broadband"! 
    Seriously, enjoy the trial!

  • Should it take this long to sync my Nano for the first time? Nine hours and counting!!!

    New Nano. Installed itunes on my laptop...moved all my music into the library. Checked the songs I want on my and chose to sync the lower 128kbps for syncing. Started this sync over nine hours ago and am a little over halway done syncing the 8.6gb of audio. Should it take this long? Is this what I can expect everytime I sync my ipod?

    No you shouldn't expect this everytime you sync your Nano.  The conversion process to 128 kpbs AAC option may be the cause of the issue.  However, they should now be already converted, so the next time you sync your iPod, it should only take a fraction of the amount of time it has this first time.
    In short, no need to worry.
    B-rock

  • HT201269 I'm updating from my iPhone 4 to the iPhone 5 and have been 'restoring' for 2 hours now and the progress bar still states I hae 6 hours remaining. Will it really take this long? How long should a restore take? It's a 32gb device. Thanks.

    I'm updating from my iPhone 4 to the iPhone 5 and have been 'restoring' for 2 hours now and the progress bar still states I hae 6 hours remaining. Will it really take this long? How long should a restore take? It's a 32gb device. Thanks.

    I am having this problem.  At first with the new iPhone 5, and then with the iPad 2.  I am not sure why this is happening. 
    My gut feeling is this is an iO6 issue and here's why -
    The problem mainly occurs with apps.  I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them.  The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
    Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage.  It required me to restore the iPad 2 from backup.  With this restore the same issues occurred - putting the apps back on the iPad would hang up.  The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
    My solution has been to soft reset the device, restart Windows, and continue the process until it's complete.  This is remarkably inefficient and time-intensive but everything works with patience.
    I have been wondering if others have had these same problems. 

  • Is it normal to take this long?

    I put together a number of clips I took on my iPhone into one single movie using iMovie. Total running time is about 30 minutes. However, when I went to finalize the project, it says it will take 12 HOURS!
    Now, I am running this (iMovie 11) on an iMac 2.8 Ghz Intel Core 2 Duo with 2GB on RAM, running under OS X v 10.6.6. I don't think this is a slow machine, but 12 hours is a bit of a stretch for a simple 30 video.
    Is this normal? Is there any way to speed this up?
    I am sort of new to the Mac world, and it is my understanding that professionals use these machines to produce professional type videos. So, if they are producing a 2 hour video, is it going to take 48 hours of rendering?

    However, when I went to finalize the project, it says it will take 12 HOURS!
    That does sound abnormal to me. If you have chosen the option in iMovie's menu "File>Finalize Project", iMovie will render all the available sizes, such as Medium, Large, HD 720p and HD 1080p. This will certainly take much longer than rendering just one size. So, unless you really need all these sizes, it's best to use Share>Media Browser and select just the size you want.
    Note that to locate the shared movie (or movies), in Finder (multi-column view), go to your User (Home) folder and click on the Movies folder then iMovie Projects. Right-click (or Control-click) on the name of your project and select "Show Package Contents" from the pop-up menu. Now click on Movies - you will see the exported movie (or movies) with a name like large.m4v, medium.m4v, 720p.mov or similar. Copy the appropriate movie then paste to the Desktop, otherwise access it from the Media Browser in applications like iDVD etc.
    John

  • Trying to update iphone 4 from ios 4 to ios 6! whys it saying its going to take so long?

    so im trying to update from ios4 to the latest software update. the phone used to be my dads but now he gave it to me so i reset the entire phone so there's nothing in it at all. like brand new.  i know you cant do it on the air so im doing it through itunes. i clicked on the option that said download and update so it happens straight away however it says "iphone software update (17hours remaining)" and its been going on for previously at least an hour. this is ridiculous. is it meant to take that long because im updating from ios4 to ios 6 and missed out ios5?

    just like to correct: im on iOS 4.3.1 
    also additional info:
    - secondly i have restarted my phone and restarted itunes many times  & i have the latest version of itunes
    - restarted everything again. i synced my phone for the fun of syncing hoping that might help although i didnt have anything to sync but anyway now its reduced the time & said "8hours remaining" but in the space of 10minutes went up to "11hours remaining" seriously? please help .
    thanks

  • Is it meant to take this long?

    Okay, I've had to leave my computer on for like 3 days now because I'm imported the entire Dragonball GT series which is 64 episodes each lasting around 20 mins each and before they can be synced onto my iPod they need to be converted and so its just taking forever. Its just done half of them but this is ridiculous.
    I'm using iPod Classic if that helps. So is there anyway to speed the converting up and get it onto my iPod?

    I cannot imagine the Rendering for a Motion Menu taking this long, if all is right with the Asset used in that Menu. I've rendered 2.5 hour Projects in far less time.
    I'd check that Asset. What is its format/CODEC? How long is it? Is the Audio separate from the Video?
    Also, do a search on this forum for "render" and variations on "render bar dropping back," as there have been a lot of articles on this happening, though usually with the full Render/Burn of the DVD. Some of these have tied that problem to mouse-drivers.
    Hunt

  • Should exporting to quicktime take this long??

    using Handbrake, i have converted from VIDEO_TS to .mp4 encoded with H264 (at 640x476 with an avg. bitrate of 1500 k/s).
    i wanted to combine two titles in the VIDEO_TS folder into one .mp4. so handbrake converted the two into .mp4 files which i then imported into iMovie on a new Mac Pro.
    in iMovie i created a new project with the two files, selected both, and exported using quicktime. i exported under similar settings to the original files, resolution (640x480), same bitrate (1500 k/s), H264, etc.
    the length of the exported movie is approx. 30 minutes.
    2 of 8 cores are running the export. (it's still in process) but the initial estimate of time was roughly 600-700 minutes. it dropped down a little bit initially, but is certanly well over 500 minutes.
    now running all 8 cores, the conversion from VIDEO_TS to .mp4 via Handbrake took about 7-8 minutes at the similar settings as indicated above.
    should iMovie really take over 500 minutes? do i have a setting that is suboptimal? should iMovie be able to take advantage of more cores like Handbrake?
    thanks

    2 of 8 cores are running the export. (it's still in process) but the initial estimate of time was roughly 600-700 minutes. it dropped down a little bit initially, but is certanly well over 500 minutes.
    This does sound a bit long. (Would normally expect expect about 75 minutes on my older machine using a default preset.) On the other hand, if all you want to do is merge the two separate files together as a single file, why not use QT Pro ($30) if you already have it or MPEG Streamclip (free) to save the files in a single container and skip re-compression process altogether?

  • I have a macbook pro and have just updated my itunes to the 10.5, it has been sitting on the 'software update' box for 2 and a half hours and only has about 3mm of space left that is not blue. Is it normal to take this long downloading this update? Help!

    I have been sitting looking at the blue line almost finished for over 2 hours. It says Writing files... underneath and Installing 11 items above the blue box. What should i do? Is there a problem or is it just taking a long time?? Im trying to set up my new iphone 4S but cant until this itunes is updated!
    Please help.
    Cheers
    Meg

    You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
    Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
    http://roaringapps.com/apps:table
    Far as your Safari problem do these things until it's resolved:
    1: Software Update fully under the Apple menu.
    2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
    https://www.mozilla.org/en-US/plugincheck/
    Flash install instructions/problem resolution here if you need it.
    How to install Flash, fix problems
    3: Install Safari again from Apple's web site
    https://www.apple.com/safari/
    4: Run through this list of fixes, stopping with #16 and report back before doing #17
    Step by Step to fix your Mac

Maybe you are looking for

  • Mauled by leopard - serious problems - can anyone solev this?

    I installed leopard on my powerbook G4 - encountered no problems whatsoever. So I decided to install on the G5 Quad as well. All seemed to go well. Then I tried to begin working in Final Cut Pro with the raid array and kept getting the multilingual s

  • Internal table data fetch

    hi, I'm fetching 10 datas from flat file to internal table. But my requirement is first column data is passed to table i need to select 5 column of data from my internal table. Eg. column 1 = A1       column 2 = A2       column 3 = A3       column 4

  • Each item in the delivery should have separate invoice

    HI friends, who to do separated invoice for each item of the delivery, even if the bill to party and billing dates are same. thanks nitchel

  • TSV_TNEW_PAGE_ALLOC_FAILED Dump in CRM

    Hi Experts, While accessing the custom componenet in CRM system we are getting the dump TSV_TNEW_PAGE_ALLOC_FAILED saying No more storage space available for extending an internal table. And we are not getting this dump every time we access this comp

  • 2.0 bios and video lag

    I flashed the BIOS on my 875P NEO-FIS2R (old 1.x version Neo) to 2.0 and now all my games have significatly lower frame rates.  I've tried installing the latest drivers for EVERYTHING in my computer and nothing seems to help.  Is there a setting in t