Is It just me? answering calls with Q

Is It just me ? I don't have huge fingers... but when i go to answer a call i end up pressing the Q key , assuming i have answered the call , put the phone to my ear.. then deafen myself with my own ringer... then try to delete Q to answer the call... soloution: how to remap Q to answer calls ( only when phone is ringing so i think the regular keychanger won't work ) ? surely i am not alone ?

FireFish wrote:
+*I'm pretty sure that this is obvious to all - I just don't see how everyone is just okay with it.+*
The iPhone battery is generally very good; even when using MobileMe with Push enabled, etc.
BUT; once you add a Microsoft Exchange account & leave Push enabled, you could probably watch the battery drain like a sewer right after a heavy rain storm.
OK, what you are seeing is a problem with your phone, not a general problem with the iPhone or any specific release. Most of the time my phone gets excellent battery life with Exchange Push enabled. Occasionally (a couple of times a year) I suddenly see a heavy battery drain with Push on. I've seen it with every release of iPhone software since Activesync was added. I've concluded that something is broken when this happens. An IT admin in the forum posted about a year ago that he saw many open connections to phones of users when they were reporting this problem. He rebooted the Exchange server and the problem went away for a while. As most of us don't have that option I've found a couple of ways to fix it on the phone. One or more of them has always worked for me.
1. Reset Network Settings on the phone and reboot.
2. Go into Mail,Contacts,Calendar, tap on the Exchange account and turn off all 3 functions. Then reboot, go back and turn them on.
If these don't fix it what I do is go into Settings again and delete the Exchange account. I then reboot and add it back. I then wait several hours for the account to resync (it's best to do this with a WiFi connection). When all of my email, contacts and calendar entries have reappeared I fully charge the phone and test battery life again. This sequence has always worked for me, but I have seen posts from owners who say it did not work. But most say it works.

Similar Messages

  • How do I answer calls with the KITKAT update?  I hit the flashing button but it's still ringing?  Where are the Answer settings?

    How do I answer calls with the KITKAT update?  I hit the flashing button but it's still ringing?  Where are the Answer settings?

    Aha!  Thank you!!!  That was not obvious. Sometimes I don't get the green and red icons.  So it's slide it to the right for answering and slide to the left for voice mail.

  • Unable to answer calls with 3.0 OS

    I posted this problem before with the 2.1 firmware here:
    http://discussions.apple.com/thread.jspa?threadID=1722193
    It appears to be even worse with 3.0, for me anyway. I just upgraded to 3.0 and out of my first 5 calls with it I had a hard time answering 4 of them. One of them was missed altogether. The slider just refused to slide. What can I say. I was so hopeful this would be fixed. Oh well.
    BTW, my "sometimes successful workaround" (change the ringer switch position) didn't seem to help.

    I have had this same problem. I had back on version 2, but thought it might be related to 3G phone being jailbroken. New 3GS does the same thing. Appears to happen mostly when the ringer is off. Sometimes the slider will move but everything stops with that, phone will not "pick up".
    I also have used the same "sometimes workaround" flipping the ringer switch back and forth.

  • Is there a smart phone that's compatible with iPhone that you can answer calls with?

    Is there a smart watch that can be used to answer calls on iPhone?

    The Google Toolbar "will not be supported on Firefox 5 and future versions." <br />
    http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
    http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
    The Google Toolbar '''7.1.20110512W''' version does work pretty good in Firefox 5.0 by using the Compatibility Reporter extension. But not every feature works 100%.<br />
    https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
    http://googlesystem.blogspot.com/2011/06/enable-google-toolbar-in-firefox-5.html

  • Answering calls with Pixi. Drag button unreliable

    Is there any other way to answer calls on the Pixi aside from dragging the onscreen green icon? I have missed too many calls because the green drag button either freezes or goes away.

    If I'm not mistaken [and it's late, so I might not be remembering properly], you can accept a phone call by sliding your phone open.  Not sure if that was something I had to turn on.  I know that if it's already open instead of the drag thing you get simple green and red buttons on the pop-up.  Try sliding it open on your next call.  There's also an option for ending a call by sliding the phone shut--I keep that off as I like to switch it depending on what I'm doing.

  • C3-00 answering calls only with headset

    Hi,
    I don't know what happens, but know I only can answer calls with the headset on.  Eventhough headset is not plug, the phone acts like if it was.  The headset icon always appears in the screen.  I just tried to restart the phone.  I took the battery off and when the phone restart the icon is not there, as soon as I plug the headset, the icon appears and it continues there til I turn off the phone and start everything again.
    If somebody know how to fix this up, pls let me know.
    Thank you.
    CB
    Solved!
    Go to Solution.

    Sounds like your device is not working like it should. Try restoring factory settings by typing *#7780*. This will boot the SW, but will not delete any files from the phone. But just make it sure I advice making a back up with Ovi suite > Tools > Back up.
    You can also try to reinstall the SW with Ovi suite > Software update > reinstall SW.
    If the issue still persist, try to format phone with the code *#7370#. This will erase the phone memory, so make a back up first!
    The last option unfortunately is to take it to the nearest Nokia Care point.
    If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

  • Why can't I answer a call with speaker on?

    iPhone 6; iOS 8.1.
    Generally when I'm at home I want to answer calls with the speaker on, but I don't see any way to do this [see note below]. Instead, I have to slide to answer, wait 1-3 seconds for the audio button to appear (bluetooth is enabled), and then touch "Speaker". In the interval, the caller hears nothing while perhaps saying, "Hello? Hello?". So if I want to converse with speaker on, I have to say, "Hold on" first, touch Audio and then Speaker.
    Note: I generally do NOT want to answer with speaker on when I'm away from home. There is a setting that I could theoretically use when departing and when returning home. The setting requires: touch Settings, touch General, touch Accessibility, scroll down, touch Call Audio Routing, and touch either Automatic (when leaving home), or Speaker (when returning).  That is not only too onerous, but I'm likely to forget to do it anyway.
    Am I overlooking a way to answer with speaker on? If not, wouldn't it be easy enough for Apple to put an appropriate button to do this on the incoming-call screen?

    Thank you for the info and links. I never actually read anything from Apple about Hebrew not being supported. Since I was able to use other languages, of seemingly greater complexity, I assumed that Hebrew would work. The patch I was speaking of (that makes Hebrew song titles, etc readable) is actually not a hack. It was developed by a student in an Israeli university and purchased by Apples regional distributor (Yeda Inc., Apple's Israeli distributor). The software is called iPodHE.
    If you would like to read more about this:
    http://www.israel21c.org/bin/en.jsp?enDispWho=Articles%5El1328&enPage=BlankPage& enDisplay=view&enDispWhat=object&enVersion=0&enZone=Culture
    The "iPodHE" web site is:
    http://yeda.co.il/iPodHE/downloadsuccess.html
    Here is a link to installation instructions in english:
    http://www.yakv.net/nextcantor/2006/09/03/getting-hebrew-on-your-ipod-a-guide-fo r-the-english-speaking-mac-user/
    I did read somewhere that they are working with Apple to resolve a conflict with the latest version of iTunes and iPodHE v2.0.
    Maybe this will be useful to someone.
    Thanks again for your help.

  • Accept call with keyboard

    On a Q10 I need to answer calls with at least one key not with a touch gesture. How can I do this?

    Problem with the gesture? Hmmm... let me think:
    1. I have 35 physical keys yet I have to swipe to accept/reject a call;
    2. Touch display is sensitive to moisture, sweat, dirt - sometimes - I can't accept/reject a call with wet hands (or gloves). No summer/winter use for me;
    3. Key press = action with feedback in one step (you know, that's why I have Q10 instead of Z10), while gesture means several steps: check call, swipe, swipe again, rub you hand with your shirt, swipe again, swear, swipe, exhale, call and explain that the phone was out of reach. Ok, not every time, just, annoyingly, that several times when it matters;
    4. Basic functionality of a phone should be to call, answer and reject connections in the easiest, most ergonomically way - this is not the case. It looks like a modem card plugged into a PC and with a full keyboard you still have to use software buttons to make it work.
    5. Ok, it is so cool to swipe but, please, preserve the traditional functionality of a keyboard. While I was typing this message I struggled a lot with selecting text for eliminate misspelled words, while a trackpad would have been more appropriate for this.
    6. Should I extend this to Speed dial issue? 

  • Can't make and answer calls using handset. But just works fine with speaker

    I have a Blackberry Curve 9630 , 
    I can't make or answer calls from the handset. Caller is able to hear
    me when call is picked up but I can't hear them. I can only make or answer
    the call using speaker option. And works fine this way. Have tried re-booting
    but doesn't work. Never experience this before and phone was working
    perfectly right up to this morning. All otheres like BBM, Email, SMS, apps,
    are working fine.
    Appreciate a quick reply on the same. Thank you.

    Can you test playing music through the BlackBerry and see if it is audible through both the speaker and the earpiece?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Is there a way to answer the 5c without swiping? It really is a pain and hard to do at times one handed. Maybe allow favorites to be answered with a click of the home button or possibly all calls with a home button push

    Is there a way to answer the 5c without swiping? It really is a pain and hard to do at times one handed. Maybe allow favorites to be answered with a click of the home button or possibly all calls with a home button push. First smart phone I have owned and the old flip phone was much easier to answer.....just press one button.

    Is there a way to answer the 5c without swiping? It really is a pain and hard to do at times one handed. Maybe allow favorites to be answered with a click of the home button or possibly all calls with a home button push. First smart phone I have owned and the old flip phone was much easier to answer.....just press one button.

  • Just updated my iphone with iOS 7.0.2 and when I call or people call me, only one party can hear the other. Would you know how to fix this problem? Thanks

    just updated my iphone with iOS 7.0.2 and when I call or people call me, only one party can hear the other. Would you know how to fix this problem? Thanks

    Hi Apple_Mom,
    Thanks for visiting Apple Support Communities.
    If you've noticed issues after updating to iOS 7.0.2, you may want to first update to iOS 7.0.3 which was recently released.
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If the behavior persists, the troubleshooting steps in this article can help:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    Jeremy

  • I know the iphone 4s can turn off the vibrate for all sounds, but is there a way to keep the vibration on for just phone calls (with the ringtone also on) but off for everything else?

    I know the iphone 4s can turn off the vibrate for all sounds, but is there a way to keep the vibration on for just phone calls (with the ringtone) but off for everything else?

    Short answer: No.  Long answer: Nope
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    WYSIWYG   No hidden settings.
    If you want to suggest this to Apple:
    http://www.apple.com/feedback/iphone.html
    Message was edited by: modular747

  • My FaceTime doesn't work... I would call a person, they would accept, and then I would be stuck in a never ending "connecting".. And this problem has been according with not just my ipad, but with other people's iDevices that I know.

    My FaceTime doesn't work... I would call a person, they would accept, and then I would be stuck in a never ending "connecting".. And this problem has been according with not just my ipad, but with other people's iDevices that I know.
    -My wifi connection is running strong
    -All the devices run the same version of iOS

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Set Up Alert Sounds
    http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
    Extra FaceTime IDs
    http://tinyurl.com/k683gr4
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Fix Can’t Sign Into FaceTime or iMessage iOS 7
    http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
    http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457#19087457
    How to watch FaceTime calls on the big screen with Apple TV
    http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    How to Receive SMS Messages on an iPad
    http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
    Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • This is going to sound dumb but I just got a call from someone claiming to be with Microsoft Windows tech dept. Apparently something malicious attacking my computer.  I hung up because I don't believe Mac uses Microsoft Window Operating System - right?

    This is going to sound dumb but I just got a call from someone claiming to be with Microsoft Windows tech dept. Apparently something malicious attacking my computer.  I hung up because Mac doesn't use Microsoft Window Operating System - right?  I have Mac OS X.  I have loaded Microsoft Office 2011.  Can that allow something malicious or is this guy a scammer and I was right to hang up???

    Actually you can install Windows on your MBP via Bootcamp.
    You should have kept the individual on the phone for as long as you can tolerate.  The time he wastes with you is time he cannot spend scamming an innocent victim. 
    You can always politely ask the caller to hold while you 'answer the front door' or the like and just set down the phone and go about your business.  The caller will eventually hang up. 
    But your analysis was 100% correct.
    Ciao.

  • How can I have a call with someone from Customer Support if I live in Costa Rica? I have forgotten the answers to my security questions and basically I can't buy anything on iTunes. I do not have a rescue email account otherwise I won't be writing here.

    I have been trying to fix this by myself but I gave up! I don't remember the answers I provided before. Tried to have a call with apple support but it seems that this is not an option if you live in Costa Rica. How am I supposed to spend the credit I have in my apple account?
    Thank you... Pura vida!

    As Costa Rica isn't on this page : http://support.apple.com/kb/HT5699
    then try contacting Support via this form and explain that you've forgotten your answers, don't have a rescue email address, and your country isn't on the HT5699 page and see how they reply : https://ssl.apple.com/emea/support/itunes/contact.html
    When they've been reset you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 .

Maybe you are looking for

  • Return data from all columns apart from a certain data type.

    Bit stuck on something, hope somebody here can help: I want to do a 'select * from ' a table, to return all columns except ones of a certain datatype. ie. I want to return data from all columns, excluding columns of datatype 'SDO_GEOMETRY'. This give

  • Error on file adapter (GENERAL_ERROR on XI_J2EE_ADAPTER_XI_HANDLER )

    Hi Experts, I have just configured a sender file adapter  with content conversion in a PI 7.0. I will try to explain the problem: 1. I put the text file on the selected folder, to be taken. 2. The file is taken from the folder and archived in the arc

  • Problem with picture insertion in a form created with LiveCycle

    I created a form with a picture field. Yet, no matter which size attribute I give to the field, (e.g. keep original size, adjust to the whole field or adjust proportionaly to the field (my version is in French so I am not sure what the English text i

  • OEM and TNS-01169

    I'm trying to connect to a 10gR2 database (via OEM) that has a password protected listener. After configuring/starting dbconsole, OEM shows that the database instance is up, however I'm getting TNS-01169 "Listener has not recognized the password". I

  • How do I hide a windows icon

    in Oracle 10g I want to hide the icon image of the windows. I want the windows shows only the title bar not the icon. Anyone can help me. Yeahia