Is it just me or do apps install a lot faster with 2.1?

Seems faster to me. Maybe its because I restored with the new software?
Message was edited by: Kamakzie1976

Similar Messages

System Profiler Report Shows PowerPC apps installed - what to do with them?

I just purchased a new iMac and successfully installed brand new shrink wrapped software: Adobe CS3 Design Standard and Microsoft Office:mac 2008. Additionally, I ran Adobe Updater and Microsoft AutoUpdate to ensure I had all of the latest updates - each ran successfully and all applications were successfully updated to the latest versions.
Following the software installation I ran System Profiler to audit all the applications that were installed and I noticed all applications installed with these packages were Universal with the exception of nine applications which are listed as PowerPC apps:
* six apps installed with Adobe Illustrator and
* three apps with Microsoft Office:mac 2008; MSML Server was loaded in two different locations?!
I am concerned that I may have problems if I happen to run any of these PowerPC apps on the Intel iMac or just the fact that they are even present on the computer and may cause problems.
Can someone offer advise if I should delete these PowerPC apps from my new Intel iMac or what I should do with them?
Thanks for your help,
John
Following is a list of the specific PowerPC apps in question that I extracted from the System Profiler Report:
Analyze Documents:
Last Modified: 2/14/08 5:56 PM
Kind: PowerPC
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Analyze Documents.localized/Analyze Documents.app
Make Calendar:
Last Modified: 2/14/08 5:56 PM
Kind: PowerPC
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Calendar.localized/Make Calendar.app
Collect for Output:
Last Modified: 2/14/08 5:56 PM
Kind: PowerPC
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Collect for Output.localized/Collect for Output.app
Contact Sheets:
Last Modified: 2/14/08 5:56 PM
Kind: PowerPC
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Contact Sheet Demo.localized/Contact Sheets.app
Export Flash Animation:
Last Modified: 2/14/08 5:56 PM
Kind: PowerPC
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Export Flash Animation.localized/Export Flash Animation.app
Web Gallery:
Last Modified: 2/14/08 5:56 PM
Kind: PowerPC
Location: /Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Web Gallery.localized/Web Gallery.app
Microsoft Query:
Version: 10.0.0
Last Modified: 12/3/07 3:00 AM
Kind: PowerPC
Get Info String: 10.0.0 (1204) Copyright 1995-2002 Microsoft Corporation. All rights reserved.
Location: /Applications/Microsoft Office 2008/Office/Microsoft Query
MSMLServer:
Version: 1.0
Last Modified: 11/14/07 3:53 PM
Kind: PowerPC
Get Info String: 1.0, ©1986-2005 Microsoft Corporation
Location: /Applications/Microsoft Office 2008/Office/Microsoft Messaging Library.bundle/Contents/MacOSClassic/MSMLServer
MSMLServer:
Version: 1.0
Last Modified: 11/14/07 3:53 PM
Kind: PowerPC
Get Info String: 1.0, ©1986-2005 Microsoft Corporation
Location: /Applications/Microsoft Office 2008/Office/Microsoft Messaging Library.bundle/MSMLServer

The Adobe items are all AppleScripts which have been compiled as applications. AppleScripts are not compiled as universal apps.
Microsoft Messenger is a universal app. It's possible the server apps are not given they are dated 2005.

Hello, I have an apple Mac Pro. It is an older machine but I just had the Apple Store install a new drive with OSX 10.6.8. It runs great but I need to load software. Will it run CS4 Design Standard? Or, will I need CS5.

Hello, I have an Apple Mac Pro Laptop. It is an older machine but I just had the Apple Store install a new hard drive with OSX 10.6.8. It runs great but I need to load software. Will it run CS4 Design Standard? Or, will I need CS5. This machine can't run 10.7.

Hi There,
As per CS5.5 Design Standard release notes it can run on 10.6.8.
Kindly try to install in and share the results so that we can assist you if needed.
Please find the download link in my previous post.
Thanks,
Atul Saini

Air app install fail in IE with Badge Installer Error # 2032

Much has been written about this problem, and the most quoted solutions are
Ensure the appurl FlashVar is not a relative url but fully qualified http://domain.com/app.air
Uninstall and reinstall Air
Empty browser's cache
None of these have solved my issue and I still have a reproducible bug.
I have set up a badge installer at http://tx.flamjam.com/mms/ which attempts to install appurl=http:/tx.flamjam.com/mms/MMSReview.air
This works beautifully in OS X but fails in Windows with the error window,
Sorry, an error has occurred.
The application could not be installed. Try installing it again. If the problem persists, contact the application author.
Error# 2032
I've tested IE and Chrome, both updated to the most recent versions.
When Air is not installed I get a slightly different error message, with no error number.
The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.
With Air installed, if I instead visit the appurl directly in the browser — http:/tx.flamjam.com/mms/MMSReview.air — the file downloads and installs without problem.
To the best of my knowledge, the error is a generic stream error which essentially means that the appurl could not be found. To demonstrate this, simply use a fictitous appurl and now the same error can be seen on OS X as well. This implies that something is malforming the appurl withing the badge, but I have modified the status display text of the badge to display the appurl parsed from the LoaderInfo object containing FlashVars payload and can confirm that the appurl appears to be consistent between OS X and Win.
Log file in next post.
I'll continue digging for a solution, and post my findings here, but would value other's input on this subject greatly.

An interesting development.
When I monitor my network traffic using ServiceCapture I can see that no attempt is made to connect to the appurl, with the install failing instantly without even attempting to connect to the appurl.
ServiceCapture on OS X confirms the attempt to connect to the appurl even if the url is deliberately fictitous resulting in a 404 response.
The badge begins the installation process using the installApplication method of the following file
http://airdownload.adobe.com/air/browserapi/air.swf
which the badge loads on startup.
It would appear to me that the installation problem is failing inside that loaded swf's code, but I'm at a loss as to how to debug that.

My iphone 5 was just stolen and i dont have the find my phone app or any other tracking app installed previously. how can i locate my device?? please help

my iphone 5 was just stolen and i dont have the find my phone app or any other tracking app installed previously. how can i locate my device?? please help

If you didn't set up Find My iPhone in the iCloud settings, then you can't. Notify the police and change the password to your Apple ID and any other online services you used from that iPhone, just as a precaution.
Regards.

I have just purchased a macbook air and have the iWorks installed for free. Can I download those iWorks apps to my iPad 3 with the same account for free

I have an iPad 3 with iOS 6.1.3 and I would like to download the iWork's apps for free. I have just bought a Macbook air and have those apps installed in that computer. i just updated my system to OS X Maverick. I have iCloud connection between both of my devices. Thanks ahead

Thanks a lot I hoped there was a way like updating my iPad would help or smt but it ***** that they only made it free for some idevices...

HT2688 I have whats app installed on two iphones. I just purchased a ipad nimi and would like to download app.

I have Whats app installed on two i phones i have just purchased an ipad mini and would like to install this app. A message comes up and tells me that it is not compatible. I there a way i can download app.

Since you have another Mac, you could share it's DVD drive in System Preferences > Sharing.
Then use Remote Disc found on the MBair's finder's sidebar. This will mount the DVD in your old Mac to the MBair.
http://support.apple.com/kb/HT1777
Regards,
Captfred

I just installed the new CC apps. Since they get installed parallel to the old ones instead of upgrading, do I un-install the old ones with the un-install app in the old folder?

I just installed the new CC apps. Since they get installed parallel to the old ones instead of upgrading, do I un-install the old ones with the un-install app in the old folder?

Easyebe,
Are you using a Mac machine or Windows PC?
If using a Mac machine, go to Application-->Utilities-->Adobe Installer-->old apps names and run the uninstaller for old apps.
If you are using Windows PC, go to Control panel-->>Program and Features and uninstall the old apps.
It will uninstall everything related to old apps, but your setting must be imporated to new version of apps.
Regards
Srishti A
Adobe Support

My iphone will not sync to my itunes library. Everytime I try it says that it can't sync because the apps installed cannot be determined. I don't care about the apps I just want my music! Help!

When I try to sync my iphone to my itunes it starts going through the steps and then just stops. A little ! shows up beside my iphone under the devices tab in my itunes, when I click on this it the says that 'Itunes cannot sync apps to the Iphone because the apps cannot be determined'

If all you want right now is your music, you can turn off the option to sync apps, that should help.
With your iPhone plugged in, open iTunes, and go to the page with details about your phone (on the left side of iTunes, it should be under the Devices header). When you are there, go to the top, click on the "Apps" tab (next to "Info"), then uncheck the box that says sync apps.

CS3 InDesign & Illustrator Install Exit Code 7; Other CS3 Apps Install Fine

I feel like I'm beating a dead horse... (no offence to horse lovers out there - it's just an expression)
I'm having trouble performing an silent install of the CS3 suite from a network share on Windows 7. I've read through a number of posts on here, one of which was a 3 page post on this issue where Mac & Win 7 users alike posted failures, successes and how they got there, and another about removing the OS check feature from the application.proxy.xml file (which didn't work for me; unless I did something wrong...?) Unfortunately for me after trying much of what was suggested, I'm still facing a brick wall.
All these machines are Core 2 Duo's clocked at no less than 2.2GHz, have 4GB of RAM, have over 100GB of free disk space and are running fully updated/patched installations of Windows 7 32-bit (x86) with Office 2007 Enterprise.
When I try to install the suite silently it fails with 'Exit Code: 7', which according to the CS3_Deployment.pdf means "Unable to complete the silent workflow." If I take out the "--mode=silent" switch, the GUI launches and installs fine. I took a look at the compressed log file & searched for "Return value 3", "ERROR" and "FATAL" for clues, but its vague and nondescript. I didn't copy/paste the entire log in this post for brevity's sake, but you can check it out here:
Condensed Version: http://pastebin.com/eFKpe9wK
Unabridged Version: http://pastebin.com/MQDeQZmF
Instead, however, I do want to touch on just a few things from the log:
[    9660] Thu Dec 02 07:08:13 2010 INFO
BEGIN Setting requested payload actions
[    9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {AC76BA86-1033-0000-7760-000000000003} Adobe Acrobat 8 Professional (At install, older versions get upgraded) per deployment file.
Setting action for {7BB7F66A-D798-45A3-A383-0727FB1EBF8E} Adobe Flash Video Encoder per deployment file.
Setting action for {abd781e6-d5ca-45aa-a5f7-f64799eb1c04} Adobe Version Cue CS3 Server per deployment file.
Setting action for {00E5C764-9525-44C3-8404-712AD06AE12A} Adobe Dreamweaver CS3 per deployment file.
Setting action for {3BC8460B-085E-47F3-9C62-8FFCBAF11D78} Adobe Flash CS3 per deployment file.
Setting action for {C4519961-AC64-4565-B3AF-9050296B5D5A} Adobe Illustrator CS3 per deployment file.
[    9660] Thu Dec 02 07:08:13 2010 INFO
Selection of payload {C4519961-AC64-4565-B3AF-9050296B5D5A} Adobe Illustrator CS3 is forbidden by the policy.
[    9660] Thu Dec 02 07:08:13 2010 WARN
Error setting action for {C4519961-AC64-4565-B3AF-9050296B5D5A} Adobe Illustrator CS3:
Localization: missing stringID "locPayloadSelectSystemRequirement" for en_US in C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804\resources\main.xml
system check
The minimum system requirements listed below are needed in order to run Adobe Illustrator CS3 and are not met.
- Windows XP Service Pack 2 and greater
- Windows Vista
[    9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {24D77A7C-E10B-4057-9974-FAB8BFDAC853} Adobe InDesign CS3 per deployment file.
[    9660] Thu Dec 02 07:08:13 2010 INFO
Selection of payload {24D77A7C-E10B-4057-9974-FAB8BFDAC853} Adobe InDesign CS3 is forbidden by the policy.
[    9660] Thu Dec 02 07:08:13 2010 WARN
Error setting action for {24D77A7C-E10B-4057-9974-FAB8BFDAC853} Adobe InDesign CS3:
Localization: missing stringID "locPayloadSelectSystemRequirement" for en_US in C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804\resources\main.xml
system check
The minimum system requirements listed below are needed in order to run Adobe InDesign CS3 and are not met.
- Windows XP Service Pack 2 and greater
- Windows Vista
[    9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {30C4B843-28DA-466F-AFCA-CB0ED153C826} Adobe Photoshop CS3 per deployment file.
[    9660] Thu Dec 02 07:08:13 2010 INFO
Selection of payload {30C4B843-28DA-466F-AFCA-CB0ED153C826} Adobe Photoshop CS3 is forbidden by the policy.
[    9660] Thu Dec 02 07:08:13 2010 WARN
Error setting action for {30C4B843-28DA-466F-AFCA-CB0ED153C826} Adobe Photoshop CS3:
Localization: missing stringID "locPayloadSelectSystemRequirement" for en_US in C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804\resources\main.xml
system check
The minimum system requirements listed below are needed in order to run Adobe Photoshop CS3 and are not met.
- Windows XP Service Pack 2 and greater
- Windows Vista
[    9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {7005ECBC-F54B-42FD-81E4-934BC43FA329} Adobe Creative Suite 3 Design Premium per deployment file.
PayloadPolicyNode.SetAction: IY->IY for {7005ECBC-F54B-42FD-81E4-934BC43FA329} Adobe Creative Suite 3 Design Premium
[    9660] Thu Dec 02 07:08:13 2010 INFO
END Setting requested payload actions
[    9660] Thu Dec 02 07:08:13 2010 WARN
Some payload actions specified in the deployment file could not be applied.
...snip - snip...
[    9660] Thu Dec 02 07:08:17 2010 INFO
Checking bootstrapper progress
Ran uninstall for the bootstrapper due to an exception
[    9660] Thu Dec 02 07:08:17 2010 FATAL
Exception: Payload actions could not be set. Search the log for "BEGIN Setting requested payload actions" for details.
Exit code: 7
[    9660] Thu Dec 02 07:08:17 2010 INFO
I've got some initial questions that pertain to what's in the log file:
The areas in bold: Since the same install also fails on Windows XP machines, what does this mean exactly?
The areas in italics: Can anyone expand on what that means?
The underlined areas: What 'Policy' is this referring to: Setup's own internal policy (like the OS check) or something else?
Here's what I've done so far:
Went through the 'Run a silent installation of Adobe Creative Suite 3' document
Went through the 'Troubleshoot installation with install logs | CS3, CS4' document
Used the Adobe Support Advisor to go through the logs, but it always says that no problems are found.
Recreated the install & uninstall XML files, twice, via the "setup.exe --record=1" method for each application & the entire suiteNot that I think this is important, but I was never prompted to enter a serial number when creating the .XML files.
Renamed the XML files for each application (e.g.: Photoshop-install.xml; CS3Suite-install.xml; Flash-remove.xml etc.)
Copied the XML files to a common folder on a network share (e.g.: \\path\to\Adobe\Design Premium CS3\Adobe CS3\XMLs)
Created install batch files for each application, including the suite, that install via the following command"\\path\to\Adobe\Design Premium CS3\Adobe CS3\Setup.exe" --mode=silent --deploymentFile="\\path\to\Adobe\Design Premium CS3\Adobe CS3\XMLs\Photoship-install.xml"
Tried the installs with & without the "--skipProcessCheck=1" switch but there's no change.
No applications are running during the installs.
Verified my application.xml.override file was in \\path\to\Adobe\Design Premium CS3\Adobe CS3\payloads\AdobeDesignSuitePremiumen_US_Volume
Verified I didn't have any strange characters in my application.xml.override fileI deleted and manually retyped all double quotes just to be sure.
I noticed that the "installSourcePath" property in the install.xml files created point to a local location rather than, what I would expect to be, the installation source folder where I copied the contents of the DVD to. On a whim I changed it to point to the copied DVD files but that didn't seem to help either so I changed it back.
FROM: <Property name="installSourcePath">C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804</Property>
TO: <Property name="installSourcePath">\\path\to\Adobe\Design Premium CS3\Adobe CS3</Property>
Aside from Acrobat Reader 9.4.0, Adobe Flash Player 10 (ActiveX & Plugin) and maybe Shockwave 11, these machines never previously had any other Adobe products installed.
For what its worth, uninstalling Acrobat Reader 9.4.0 doesn't seem to help either. I didn't try removing Flash Player or Shockwave [yet].
Using the install XML files I created via "setup.exe --record=1", when I run installs for the individual applications silently [via batch files] one at a time, all applications install fine except for Illustrator and InDesign: Exit Code 7.
This may further help suggest my application.xml.override file is fine.
Even more interesting is that I get the same error on Windows XP and Windows 7 machines alike. (See the image below taken from an XP machine; the same happens on Windows 7 machines so it doesn't appear this problem is OS specific.)
Other than removing Flash Player, Shockwave and ripping out our Anti-Virus solution (Sophos), which is going to be difficult, is there anything I've missed?
Anyone have suggestions on why Illustrator and InDesign don't install?

I spoke with Adobe Support today and was directed to this support article:
CPSID_84332 - http://kb2.adobe.com/cps/843/cpsid_84332.html
Although this article speaks to CS5 installations, even though I thought I made it clear that I was working with CS3, I decided to give it a shot anyway.
The first comment passively suggests troubleshooting [all] "install errors using Creative Suite 5 install logs", which links you to CPSID_84451 - http://kb2.adobe.com/cps/844/cpsid_84451.html. But again, its CS3 I'm having trouble with and I've already linked, what I believe to be, a more appropriate CS3 [and CS4] log troubleshooting document in my first post.
Step 1 requires restarting "your computer in a minimized state before running the installer." - This isn't at all optional nor ideal when we're talking about silent installations, especially when they can take place in the middle of the day - its highly distruptive, or deployments in general. Plus, I'm not interested in developing a package that will perform the steps outlined and then undo everything. Its important to note that this isn't a one-off problem: every machine that needs to have CS3 installed experiences this problem. But for what its worth:
I did as instructed in the troubleshooting documentation but it didn't work.
No other applications fail to install, and all but these lone Adobe CS3 apps install fine; what gives?
Step 2 is to perform a repair installation of the Windows Installer. (FYI: Windows 7 ships with 5.0, my version is 5.0.7600.16385, and for the record there doesn't seem to be a redistributable download available at this time.) I can't use this as part of my silent installation package because it calls you to run `sfc /scannow` which is time consuming and, if something is found, often requires a reboot. Fortunately for me, "Windows Resource Protection did not find any integrity violations."
Step 3 is to preinstall Adobe Air and the AdobeHelp payloads:
AIR isn't part of the CS3 DVD, it has to be downloaded & installed silently (via -silent -eulaAccepted if you don't have the redistributable package); this was done but didn't help.
There isn't an 'AdobeHelp' payload, only 'AdobeHelpViewerAll', which will not allow a manual instalation so I can't do that.
In summary, these tips unfortunately did not solve the problem.

IPhone stuck in reboot loop - too many apps installed?

Hi guys!
Starting some months ago, I've had nothing but problems with my iPhone. However, I've been dealing with most of these or even solved them.
But now I'm stuck on a reboot loop for a few days and don't know what to do.
When did it start? I think it was in May when I first got panic.plist, ResetCounter and SpringBoard-CrashLogs under "Diagnostics and Usage". Following this, everytime I rebooted my phone or the battery was empty, it could take some more minutes than normal for my iPhone to boot. This loading time increased and increased, in October it once took more than two days for my iPhone to reboot. I now have really thousands of those ErrorLogs. The Apple support on the phone couldn't help me either. Additionally, the phone performed some cruel changes I can't explain: Once the language was changed, once the photo gallery had to be restored (the iPhone did that on its own).
However, sometime in November the iPhone crashed, and I was already thinking that it would now last a few days until I could use it again. But somehow it was done within 15 minutes. Without any error or reboot loop. The last two months I haven't had any problems with this until the battery was empty three days ago.
Since then, I have had the iPhone plugged in so the battery doesn't get empty and it's stuck on the bright Apple logo. After about 210 seconds the logo gets dark, then the screen is completely black and it's starting the same procedure again. Sometimes I get the vibration, sometimes the loading circle (white wheel of death!), but everytime it just starts over again.
I am pretty sure this problem appears because I have more than 1300 apps installed (yes, this is a very huge number, but I remember Steve Jobs saying that, with the folders in iOS 4, it would be possible to have a few thousand apps installed), 4000+ photos, and so on. I am pretty sure it's not a hardware, but a software problem. In detail, it's about the SpringBoard. The iPhone 4S only has 512MB RAM, so it's hard for it to load 1300+ app icons into its memory (which it has to because the SpringBoard has to run without any lags). Only in some cases it's able to boot that up, but I have absolutely no idea which cases these are and why it has run well for the last two months, but beginning with the new year stopped to work.
Furthermore, the panic.plist entries all say that the problem is a watchdog timeout. Apple's iOS seems to allow the devices only to take up to two minutes (always around 120 seconds in the CrashLogs) to boot up, then probably another 120 seconds to launch the SpringBoard process (which explains the watchdog timeouts in the SpringBoard-CrashLogs).
I will not restore the iPhone because I unfortunately haven't backed up for a long time and there have been many data changes since the last backup.
So altogether, I tried to collect all the information I know here, but that's really not enough. Apple unlikely wants to help me, the phone support was really nice, but even asked his superior, who couldn't help either.
My questions to you folks now are: Do you have any more information regarding panic.plist's, watchdog timeouts or reboot loops?
What would your advice be? Any chance to get onto my data and back it up? Or is waiting the best solution?
Would it be better to try several hard resets, or let the battery run empty and start the whole process again, or just let the phone plugged in so it tries to reboot on and on until it's hopefully successful sometime?
And: Would it maybe increase the loading time if I would take the SIM card out of the iPhone, so the chance to have an successful try would be higher?
Note: I am still using iOS 5.1.1 because I am completely sure that I'd have to buy an iPhone 5 to run 1300+ apps on iOS 6.

Okay, some more information about this.
Apparently there is a 'watchdog' that listens whether the iPhone's software responds or not. If it doesn't, it forces a restart, and also creates a panic.plist entry (under Diagnostics). Unfortunately the responding time is only 120 seconds. The problem I have now is the so called 'Application Map'. To ensure a smooth browsing through the different screen filled with apps, this map is regenerated everytime the user installs a new app or deletes one. Because I have more than 1300 apps installed, generating this Application Map usually takes more than two minutes. I can only hope that sometime in the next days my iPhone will be able to do this in less than 120 seconds (like it has done that several times before).
I still can't explain why everything had been working great during the last two months. I have probably installed some new apps, but also deleted other ones, so the number of total apps didn't really increase heavily.
However, I've read about some possible solutions to this problem (without restoring - which would solve the problem only temporarily anyway):
Hard-resetting the iPhone until the screen is completely black, then wait a few minutes, then turn the device on. It's possible that this has to be repeated several times, but for the user who posted this it resolved the issue.
For all the (in this case lucky) guys with a jailbreak: SSH into the iPhone, then temporarily move the watchdog located under /System/Library/SystemConfiguration/mobilewatchdog.bundle to a different folder, the iPhone will boot up after a few minutes. Then just move the watchdog back. It's a shame that apparently jailbreak users can resolve this issue, while normal users can't.
I also want to note that this problem has been appearing since iOS 2, which came out more than four years ago. It would be really no big deal for Apple developers to change the 120 seconds to e.g. 300 or even more. I've found hundreds of threads, not only here, where users complain about exactly the same issue. I don't have any hope that an Apple employee will ever read this, but if so, please keep that in mind. I don't understand why Apple has done nothing to solve this issue.
However, if you have any more ideas, please reply here. If there's anyone around here who has managed to successfully install more than 1300 apps on his iPhone (or iPod touch), please post that.

I have problems accessing apps installed in my iPad through iTunes 12

I have several apps installed in my iPad, among them Adobe Reader and AVPlayerHD. With the previous version of iTunes it was easy to access these apps and upload content directly to the apps in order to see this content on the iPad 3rd gen, model MD368B/A.
Now I can't even find a way to access the apps via iTunes!
I see the Apps item on the menu on the left side column. Click there and I see a list of apps on the right side. Click on Adobe Reader icon for example and nothing happens. In the previous version of iTunes I could see the icon, click on it and there would be an area where I could either drag content to it or click a button to upload it. Now that functionality seems to be hidden or has disappeared.
To say this absolute disregard to the user experience from Apple is frustrating is an understatement. Why does the company insist on being this disrespectful to us users' time? Why should I have to put effort into 'learning' how to navigate a new interface when all these changes from the previous version seem superficial, irrelevant and just plain idiotic? There seems to be absolute no advantage to this new user interface.
And I used to love Apple. I have used its products for more than 20 years. In part that's the biggest annoyance. There is really no alternative, so if they keep messing with these absurd interface changes and lack of awareness and respect for the user's experience there's little to do about. Except rant like this on such a forum. Is there any hope anyone from the company might ever listen?
Any help with finding the way to upload content to Apps installed in my iPad via iTunes would be very, very much appreciated.

Try this Re: Wi-Fi Sync not working in iOS 5

I have itunee 11 and iphone 4 and i can't sync my apps to the iphone. it just stops on "determining apps to sync".please help

i have itunee 11 and iphone 4 and i can't sync my apps to the iphone. it just stops on "determining apps to sync".please help

it is an itouch, i buy apps from the app store, they are purchased, they show up in my app section but when i try to sync them to my itouch they do not show up in on the itouch. i have tried to atuthorize and deauthorize the computer also few times, rebooted computer and still nothing. when i restore the firmware and have everything reinstall all over again the apps music and such, all show up. however if i buy a new app and try to sync it with the itouch it does not show up despite the fact that the computer states 'installing "......" whatever app. it happens with numerous apps, there is no rhyme and reason to why certain apps just do not show up on the itouch. the authorize/deauthorize deal does nothing to rectify the situtaion. any other ideas ?

If i factory reset my ipod touch(5th gen), can i reset it as the option 'set up as new ipod', and then i can just go into the app store/itunes store and restore my music and apps and not icloud with photos and ect?

if i factory reset my ipod touch(5th gen), can i reset it to the option 'set up as a new ipod', and then i can just go into the app store/itunes store and log into my apple ID so i can just restore my music and apps and not icloud with photos, contacts, ect. and then later i can add contacts that i need/want instead of them restoring them from icloud?
The reason i asked this question is because i have been wondering this a lot ever since i got an exchange on this ipod (and ive only had it for a few weeks now) because my last ipod had a lot of problems. so after i restored my ipod with my computer/itunes, i downloaded apps that i wanted, and then when i went to the storage to see how much storage was left, it said 0 bytes. i was freaking out because i didnt know how that could be, i mean, cause like, that is impossible when i just 'purchased' it, that the space was full but i looked and all my pictures were on this ipod and i already put them on my computer so i dont need them anymore thats why i wanna reset it now so there is nothing on it so i can have more space for stuff to do and download on it.
it is updated to iOS 8 but that happened when i purchased it, so i didnt have a choice to update it even though i didnt want to update to iOS 8...
and i hope you understand my problem..
i would REALLY REALLY appreciate it if someone could tell me a solution to my problem!!! thank you so much!
-sierra

Hey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.

Not able to sign in to Company Portal app installed from Windows Store

Not able to sign in to Company Portal app installed from Windows Store .I'm using Workplace joined (Intune + SCCM 2012 R2) Windows 10 Laptop.
Following is the error which I got while trying to sign in with my Intune trail account
Any idea much appreciated :)
--- Exception Details ---
System.Exception: Authentication failed because response data could not be parsed.
Stack Trace:
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<UpdateContextFromAuthenticationResponseAsync>d__c.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<AuthenticateAsync>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Management.Services.SelfServicePortal.ViewModels.ServiceLoginPageViewModel.<AuthenticateAsync>d__b.MoveNext()
2014-10-30T17:44:27.6437234Z
VERB MethodEnter
Common 1800
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - CheckMonitoringCapable() Enter
2014-10-30T17:44:27.6437234Z
INFO Event
None 0
User is not authenticated, monitoring is not capable.
2014-10-30T17:44:27.6437234Z
VERB MethodLeave
Common 1801
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - CheckMonitoringCapable() Leave
2014-10-30T17:44:27.6437234Z
VERB MethodEnter
Common 1800
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - DelayPolling() Enter
2014-10-30T17:44:27.6437234Z
INFO Event
None 0
Attempting to delay polling task for '30' seconds.
2014-10-30T17:44:45.9431915Z
INFO Event
Application 611
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 WebAuthenticationBroker AuthenticateAsync to url: https://go.microsoft.com/fwlink/?LinkID=314087&&appru=ms-app://s-1-15-2-2666988183-1750391847-2906264630-3525785777-2857982319-3063633125-1907478113/&api-version=1.1
returned result:Success
2014-10-30T17:44:45.9431915Z
INFO Event
Application 611
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 WebAuthenticationBroker returned result:Success
2014-10-30T17:44:45.9744572Z
INFO Event
Application 208
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Authentication failed because response data could not be parsed.
Exception:
System.ArgumentException: User agent string ("Mozilla/5.0 (Windows NT 6.4; Win64; x64; Trident/7.0; MSAuthHost/1.0; rv:11.0) like Gecko") does not contain match for Windows version regex pattern ("Windows
NT (?<Version>6\.2|6\.3)").
Parameter name: userAgent
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.AuthenticationResponseData.GetWindowsVersion(String userAgent)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.AuthenticationResponseData..ctor(String responseData)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<UpdateContextFromAuthenticationResponseAsync>d__c.MoveNext()
Response Data:
wresult=eyJ0eXAiOiJKV1QiLCJhbGciOiJodHRwOi8vd3d3LnczLm9yZy8yMDAxLzA0L3htbGRzaWctbW9yZSNyc2Etc2hhMjU2IiwieDV0IjoieE42Z05aYlhvYmRRMkhhbl8yT08xTUZ1SHFZIn0.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.bZmz4BNmW1sg90bmUED-y0gSpR3qFfHpBZz6jf_7pMIEiO-n8TF8aPryDgLE0_pOXBBxjGZj2CjvvCjKE3xtc_RCfQ66f8sPjJDk5nDn87Zqr3nuybcWyr_QJzLAV-wrqBQyZbhiKXjAHByQfovl25EJEljwiYc8gvDAh6mSpOiSNDRo51iycmtFPJVg9SLomONTtrIvNI-c4OksER4smKiuV989EBxA2IUUbuUMpEXArFBtAJMQe4IyDCdVV_c-45i69cVNeIjcc9WkzgUx4wkdMOVXY-TVKGkyW67Iu62dU_3fJhRJ6Cc_ZfSFWby-QB9Vj-1qu3LdtkU4z4LX_Q&tokenCookie=eyJ0eXAiOiJKV1QiLCJhbGciOiJodHRwOi8vd3d3LnczLm9yZy8yMDAxLzA0L3htbGRzaWctbW9yZSNyc2Etc2hhMjU2IiwieDV0IjoieE42Z05aYlhvYmRRMkhhbl8yT08xTUZ1SHFZIn0.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.bZmz4BNmW1sg90bmUED-y0gSpR3qFfHpBZz6jf_7pMIEiO-n8TF8aPryDgLE0_pOXBBxjGZj2CjvvCjKE3xtc_RCfQ66f8sPjJDk5nDn87Zqr3nuybcWyr_QJzLAV-wrqBQyZbhiKXjAHByQfovl25EJEljwiYc8gvDAh6mSpOiSNDRo51iycmtFPJVg9SLomONTtrIvNI-c4OksER4smKiuV989EBxA2IUUbuUMpEXArFBtAJMQe4IyDCdVV_c-45i69cVNeIjcc9WkzgUx4wkdMOVXY-TVKGkyW67Iu62dU_3fJhRJ6Cc_ZfSFWby-QB9Vj-1qu3LdtkU4z4LX_Q&userId=dd6a6db8-3f7a-4084-9fa1-198d5ca0905b&tokenExpiry=1196&serviceLocatorUrl=https%3A%2F%2Fmanage.microsoft.com%2FRestUserAuthLocationService%2FRestUserAuthLocationService%2FServiceAddresses&userAgent=Mozilla%2F5.0+%28Windows+NT+6.4%3B+Win64%3B+x64%3B+Trident%2F7.0%3B+MSAuthHost%2F1.0%3B+rv%3A11.0%29+like+Gecko
2014-10-30T17:44:45.9744572Z
VERB MethodLeave
Common 1801
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService - AuthenticateAsync() Leave
2014-10-30T17:44:45.9744572Z
ERR_ Event
ViewModel 2202
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 System.Exception: Authentication failed because response data could not be parsed. ---> System.ArgumentException: User agent string ("Mozilla/5.0 (Windows NT 6.4; Win64; x64; Trident/7.0; MSAuthHost/1.0; rv:11.0)
like Gecko") does not contain match for Windows version regex pattern ("Windows NT (?<Version>6\.2|6\.3)").
Parameter name: userAgent
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.AuthenticationResponseData.GetWindowsVersion(String userAgent)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.AuthenticationResponseData..ctor(String responseData)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<UpdateContextFromAuthenticationResponseAsync>d__c.MoveNext()
--- End of inner exception stack trace ---
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<UpdateContextFromAuthenticationResponseAsync>d__c.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<AuthenticateAsync>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Management.Services.SelfServicePortal.ViewModels.ServiceLoginPageViewModel.<AuthenticateAsync>d__b.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Management.Services.SelfServicePortal.ViewModels.ServiceLoginPageViewModel.<AuthenticateWithExceptionHandlingAsync>d__6.MoveNext()
==========================================================
2014-10-30T17:44:57.6486693Z VERB
MethodLeave Common
1801 c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - DelayPolling() Leave
2014-10-30T17:44:57.6486693Z VERB
MethodEnter Common
1800 c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - CheckMonitoringCapable() Enter
2014-10-30T17:44:57.6486693Z INFO
Event None
0 'Microsoft.Management.Services.SelfServicePortal.Common.Portable.DataAccess.IApplicationsRepository' is not registered, monitoring is not capable.
2014-10-30T17:44:57.6486693Z VERB
MethodLeave Common
1801 c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - CheckMonitoringCapable() Leave
2014-10-30T17:44:57.6486693Z VERB
MethodEnter Common
1800 c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - DelayPolling() Enter
2014-10-30T17:44:57.6486693Z INFO
Event None
0 Attempting to delay polling task for '30' seconds.
==========================================================
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

I just noticed the same. Looking at the following error message it seems to do a version check and based on the results of that check I would think that it's not supported yet.
System.ArgumentException: User agent string ("Mozilla/5.0 (Windows NT 6.4; Win64; x64; Trident/7.0; MSAuthHost/1.0; rv:11.0) like Gecko") does not contain match for Windows version regex pattern ("Windows NT (?<Version>6\.2|6\.3)").
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Is it just me or do apps install a lot faster with 2.1?

Similar Messages

Maybe you are looking for