Is it just me or is using the iPhone become the most frustrating and worst experience ever

Ever since I updated my phone to the iOS 8 and iOS 8.0.2 the phone gets blocked, sometimes I can't answer calls, sometimes it leaves applications while I'm still using them. it takes time to reacts to what I'm typing, the autocorrect is very anoying it imposes corrections u have to accept them then erase the word again and rewrite it the way you want.
I Encouraged all my friend to update; and now wether they have the 4s or more recent devices  the yare all blaming me for what is happening to their phones

I get better 3G signal after the last update and in some areas where I used to get 1 or 2 bars maximum, now I get 3 and it is not dropping like before.

Similar Messages

  • It took forever to get the Adobe Acrobat DC to download, it finally did and I am trying to convert a file from PDF to RTF and it is telling me that I am not connected to the Internet.  This is the MOST frustrating product I have ever tried to use!!  Why i

    I don't want other people to answer this question,  I want a an Adobe support person to answer the question.
    Why can't we get support??  We paid for a product that is not able to be supported????

    Hi Michelle ,
    We are extremely sorry that you have had a bad experience with Adobe .
    As far as your issue is concerned ,Acrobat generally prompts for internet connection as it is required to activate the product before you could use it comfortably .Once the product is activated or licensed you would be able to use the software offline .
    This could be the possible reason you are experiencing this .Please check if you have done so and still facing this .And if you have not ,you need to license/activate your product by typing in your credentials ,i.e Adobe ID and password .
    You could also refer the following link to get updated about the activation of your product .
    https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to
    Regards
    Sukrit Dhingra

  • The most frustrating software i have ever used.

    I am getting an error message "The localized resource files for this application could not be loaded.  Please reinstall or repair the application and try again.  This I have been doing since 9:00 a.m. this morning.  I purchased the Student version of Illustrator 4 and photoshop 4 for my highschooler who is planning on majoring in graphic arts.  I am no IT person but I have loaded software before.  I have been trying to load (correctly) illustrator for the past two weeks.  At each step there was a problem that took me days/ to resolve.  As i said, I am no IT person.  Below is  a message I posted earlier today.  I finally found an answer posted by someone named Bret and it worked!!!!!.  Please can someone help me with the above problem.  I am so afaid of installing Photoshop extended if I can get illustrator.
    I am far from being an IT person and am very frustrated in loading this software.   I purchased the student version of Adobe photoshop  CS4 extended and Adobe Illustrator CS4.  My daughter had put a trial version on our computer for an art project. A month later I purchased both Adobe photoshop cs4 extended  and Illustrator 4.  I had trouble loading illustrator until I deleted the trial version.  After deleting cs4 extended, the illustrator worked. However something messed up my printer.  I did a system restore (opps) which messed up my Macafee virus.  I finally fixed Macafee with the help of the customer service.  However, the system restore took off the illustrator and put the cs4 extended version back on.  What a DAY.  I waited a week to try to reinstall illustrator and the CS4 extended.  Now my system will not let me uninstall the trial version nor put illustrator on correctly.  Help--you are my only hope.

    fharris123 wrote:
    1.  I am using aspire
    2.  ram is 767 mb
    3.  System is Vista Home version
    4.  Trying to load Education version of Adobe illlustrator CS4.  When this is loaded will try to load Educaton version of Adobe Photoshop cs4 extended.
    5.  Purchased from Academics in florida for my High Schooler.   Had to provided a letter from her school along with her photo ID. Both were bought at student discount.
    Did you read the systems requirements?
    2GHz or faster processor
    Microsoft® Windows® XP with Service Pack 2 (Service Pack 3 recommended) or Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1 (certified for 32-bit Windows XP and Windows Vista)
    512MB of RAM (1GB recommended)
    2GB of available hard-disk space for installation; additional free space required during installation (cannot install on flash-based storage devices)
    1,024x768 display (1,280x800 recommended) with 16-bit video card
    DVD-ROM drive
    Broadband Internet connection required for online services*
    No you just squeeze under that it would seem, correct?
    But then there is the system and the other applications running like your e-mail clients and browser and they all use RAM.
    So I thin you might be running into t bottle neck.

  • The most frustrating program I've ever used

    This is my second go around with itunes and can't believe a company whos latest ad campaign focuses on how simple the apple computer is to use could actually release this piece of garbage. I consider myself to be an advance user and have loaded files on to every conceivable type of portable media device without issue with total ease. Trying to load or delete files is an absolute nightmare. Please don't tell me to read the manual because I have read the very minimal information in the manual and it does not explain one iota of how to use this program. Very dissapointing, I am seriously thinking of returning my 30g video and buying a zune or a zen.

    It has always worked right, out of the box. HOWEVER, I have to admit I am still using iTunes version 6 because it DOES work right and I have found no reason to update to version 7 since v6 ain't broke for me. So there is that chance that going to version 7 could result in trouble, but I am wimping out and sticking with stable ol' version 6.
    Patrick

  • How can I make the background one solid color?  It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop.  So, how can I have just a solid white background?

    How can I make the background one solid color?  It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop.  So, how can I have just a solid white background?

    When talking about a specific image posting the image may be useful.
    One can use a Layer Mask and add a white Layer underneath.

  • HT4759 I just updated my iPad to the new ios and now it won't let me use iCloud. I have been in my settings and it says I need to agree to the new t&c's but when I click to do it my device freezes. Any Idea what I can do as I can't download new app either

    I just updated my iPad to the new ios and now it won't let me use iCloud. I have been in my settings and it says I need to agree to the new t&c's but when I click to do it my device freezes. Any Idea what I can do as I can't download new app either

    Sorry. There's nothing anyone can do. The current version of the facebook app will not run on 4.2.1. The iPhone 3G won't run anything higher than 4.2.1. You're stuck.
    Maybe it's time to buy yourself a new iPod Touch.

  • I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help needed.

    I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help is needed to access those documents using the resident software on my MacBook Pro rather than the Beta software on iCloud.com.

    I have iCloud Drive set on the Finder sidebar and use that to open the Numbers Spreadsheet on iCloud.
    OSX 10.10.3
    Best.

  • TS4268 Please help, I can't find face time and Siri icon on my mini ipad? Just bought it I have the IMessage icon and is able to use it.

    Please help, I can't find face time and Siri icon on my mini ipad? Just bought it I have the IMessage icon and is able to use it.

    There is no Siri "icon". You access Siri using the Home button. But you may need to turn it on: Settings App > General > Siri. http://support.apple.com/kb/HT4992
    Same for the FaceTime function (but if it is ON, there will be an icon): Settings App > FaceTime > [turn it on and set you Apple ID. http://support.apple.com/kb/HT4319

  • The pdfs that are produce in Word are very large. I need a method of compressing them variably - not just a quick reduction using the quartz filter.  Is their a suitable free compression programme,

    The pdfs that I produce in Word are very large. I need a method of compressing them variably - not just a quick reduction using the quartz filter.  Is their a suitable free compression programme,

    PDF Shrink for Mac
    Compress PDF – Reduce your PDF Online
    PdfCompress for Mac

  • The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail. Help?

    The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail.
    The iPad was bought in mid-June, but I did not get extended Apple-Care warranty on it. Any idea of what's happenening?

    Multiple means how many? If only 2 or 3, they could all be faulty. Try the headphones in some other device, to make sure they are OK. Or there could be something wrong with the headphone port.
    Your iPad is still covered by the 1-year warranty so you should make a Genius appointment and have it looked at.
    Another thing to try is to plug in the headphone jack a few times in succession to see if it frees up something inside the port.

  • HT4314 I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

    I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

    I have the same problem.. EXACTLY. .  When phoning Apple Support they had trouble understanding my problem and couldnt find any type of solution. No one seems to take responsibility for GameCenter issues. The assistant escalated the problem but no one could find an answer. .
    The only idea was to set up a new apple id, hence a new GameCenter account. . But that would loose all the itunes data. Anyone got ideas ?

  • The scroll back gesture to the previous page, even after i sign out of my email account or Facebook anyone can still be able to see the content in the accounts just by scrolling back using the gesture.

    the scroll back gesture to the previous page, even after i sign out of my email account or Facebook anyone can still be able to see the content in the accounts just by scrolling back using the gesture. how can i stop safari from showing the content of my accounts?

    Try calling Tech Support, they should be able to check to see if theres a lock and try to help you reset it, I had to call and get my account unflagged, for something that I didn't even do.

  • I just updated my Apple ID to a current email address, it worked on my laptop but my phone is still using the old one and neither password works. I can't download or use anything other than phone calls and texting on my phone now. Help!

    I just updated my Apple ID to a current email address, it worked on my laptop but my phone is still using the old one and neither password works. I can't download or use anything other than phone calls and texting on my phone now. Help!

    go to settings
    then to store
    tap your id then click sign out
    then sign back in and you should be fine

  • I am using the MODBUS library and can't receive data, however I can send it just fine?

    Hi,
    I am using the Modbus Library to communicate with a VFD to control a fan. I am using the master write and read vi. I can write data to the VFD and get the fan to do what I want. The VFD is supposed to send a confirmation packet after I tell it to do something and I can also read its registers. When I debug the VI it shows the problem is the buffer always reads zero and the VI timesout. If I watch the lights of the USB to RS 485 adapter I am using to interface with the VFD, I see that the RX light flashs right after I send a message. So I should have something in the buffer. Does anyone have any suggestions?
    Aaron
    Solved!
    Go to Solution.

    Ok, heres what happened for anyone who has this problem. In the MB Serial Receive.vi The Bytes at Port property node was reading 0 even though there was something in the buffer. The program execution was then stuck in a loop till it timed out and never went on to read anything from the serial port buffer. I didn't spend too much time wondering why that VI didn't work and created my own. With an appropriate delay after writing to the serial port,  I used the same Bytes at Port property node and was able to get the right number of bytes to then feed the read VISA vi the number of bytes to read. I got the right response message and everything seemed good. But of course NOT! I then experimented with writing different speeds to the VFD to get the fan to run at different speeds. I found a small range of speeds where I would get no response from the VFD, either by it functioning or sending me a response packet. After quite some time, I found there is an error in the LRC-8 code in the MODBUS NI library. It does not mandate the LRC be a two character value. So if your LRC turns out to be a single character value such as F (which should be 0F)  you get an incomplete MODBUS message. This was easily fixed in the LRC8 vi by telling the 'number to hexidecimal string' vi to produce an output with a minimum width of two. Then everything worked great. Moral of the story is the MODBUS library is clunky.

  • I just downloaded the latest software to my iPhone 4 and I am now getting my sons messages.  he too uses the same itunes and pc to sync, how do I stop this?

    Hi, I downloaded the latest software for my iphone 4 and this morning I received text messages that were meant for my son.  we both use the same PC and iTunes for our iphones, so will he get a copy of my messages too when he upgrades his software?
    does anyone know how to stop this?  or how it happened in the first place?
    thanks
    Cathy

    You have an Apple ID signed in to all the devices which is causing this.
    "When you sign in to your Apple ID with iMessage using an iPhone with iOS 6, your Apple ID is linked to your phone number. This allows you to receive iMessages sent to your phone number on other iOS 6 devices signed in to the same Apple ID."
    To correct this, go into Settings > Messages > Send and Recieve at > See below...
    On your phone: Uncheck your son's phone number
    On his phone: Uncheck your phone number.
    On iPad: Uncheck both phone numbers to prevent iMessages sent to either number to also appear on the iPad.
    If you have email addresses associated here, then you may have to remove those as well, although you won't be able to remove the Apple ID that you're using. Any iMessage sent to that Apple ID will arrive at all the device unless you sign out of that Apple ID and create/use another Apple ID for that device.

Maybe you are looking for

  • FF 29 What's New/Committed to privacy page keeps opening

    The What's New/Committed to privacy page keeps opening. Windows 7 for the OS. Things I have tried: Delete user.js and prefs.js. Didn't fix the issue. Set browser.startup.homepage_override.mstone to ignore both via about:config and directly editing pr

  • Cant find bean class from jsp page using Tomcat 4

    Hi I have searched numerpus forums and seen many posts from people who seem to have the same problem however none of the solutions seem to work for me. I have a jsp page which is trying to call a bean method however I get an error saying that the cla

  • Hardware Test message

    Hello. I have a G3 500 iMac which has been having startup problems for some time. I have run Apple Hardware Test and got a mem_/2/5 error. I haven't been able to find any hints with Google. Can anyone help me understand what is going on? Thank you. m

  • Barcode not showing up

    Hi I am trying to fill an application for  canadian visitor visa using adobe reader dc. After filling the application when I click on Validate, it do validate but the barcodes which are supposed to be shown are not appearing although my javascript se

  • READ_TEXT showing problem in smart-forms

    Hi All, I am using the FM READ_TEXT in Smartforms.I have a text like M & M.When passed in the FM i get the output as M<(>&<)>M. Symbol & is displayed as junk. I debugged the FM and i can find it is getting converted at if rt_header-tdtexttype is init