Is it mandatory to give the software component version
while setting up sld objects . and in creating a software product is it mandatory to give the software component version also in it
please advice
thanks and regards
sandeep
Hi,
When u click on Product then it will give u one screen where u need to provide product,Unit,vendor,version,name all fields are mandatory.
Yes it is mandatory field.
Haev a look at the process in SLD.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
Thnx
Chirag
Similar Messages
-
Error in IR Namespace is not defined in the software component version
Hi All,
Please provide your valuable inputs to resolve the issue.
Namespace http://xxx.com is not defined in the software component version xxx_xxxxxx , 1.0 of xxx.com
Though the software component was already created in SLD and imported.All the developers were able to access the software component and create the Namespaces for their scenarios, but when tried to Activate the scenario above mentioned error is displayed.
Below are the checks done.
1.In Exchange Profile checked the properties,
com.sap.aii.connect.cr.httpport
com.sap.aii.connect.cr.name
com.sap.aii.connect.landscape.httpport
com.sap.aii.connect.landscape.name
2. Tried to import the software components once again through IR -- No results
3. Restarted the Java Engine through SMICM -- No results
4.Performed the SLDCHECK no errors.
Inputs please at the earliest
Regards
Shiva.Hi Jochen,
This is occuring due to that the created namespace is not getting activated. As mentioned in earlier replies that if you have copied objects from somewhere else then all the related information should also be copied. If the problem resists then you can create all the needed objects in IR again and activate it separately instead of activating all at once.
Regards,
Subhasha -
Can we change the Software Component Version's Name?
Hi everyone,
Can we change the Software Component Version's Name in the Integration Repository? If we can, how can we change it?
Regards,
Nickhi Nick,
Procedure:
1. create a new software component in SLD
2. create a new version of this software component in SLD
3. import in into the repository
4. try using release transfer to transfer objects
from old on to the new one
http://help.sap.com/saphelp_nw04/helpdata/en/e8/e8573ba5f13048be50532fc3fcea9c/content.htm
5.delete the old software component
/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
BTW
<b>do not chage it in the database!</b>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
How to import the software component version in PI7.1
Hi Experts,
I am new to PI7.1 . How can we import the software component vesrion in PI 7.1.
Regards
SantoshHi,
go to Tools ---> Transfer form System Landscape Dir ---> Import Software component vesrion
Sorry, above method is for XI3.0
Regards,
Sarvesh
Edited by: Sarvesh Singh on Dec 30, 2009 7:03 PM -
Insufficient authorization to import software component version from SLD
hi guru
i can not import software component version from SLD into ESR. once the software component version has been chosen, a message will be displayed, Insufficient authorization to create object ElementTypeId: 0, Name: SALES, Vendor: sap, Version: 1.0, GUID: 32e93300b3e511decc06ecae0a421877, after CREATE button has been clicked.
any ideas? thanks
Edited by: Stephen Xue on Oct 8, 2009 12:00 PMHi Stephen,
If you want to create the SWCV and import that SWCV to the IR/ESR then your user having either one of the below roles.
SAP_XI_ADMINISTRATOR
SAP_XI_CONTENT_ORGANIZER
Go to transaction SU01 and give your user name and click on display.
Now click on Roles tab, here you check the above roles are appearing or not, if not then you don't have privilizes to do that things.
If you don't have that credentials then contact your BASIS guy.
FYI
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
Regards
Ramesh -
Can not view a Software Component Version in Enterprise Services Repository
Hello,
I'm trying to import in ESR the software component version created in the SLD. I'm using SAP PI 7.3.
Into to work area select Software Component Version and click on checkpoint Import from SLD. Click in bottom Display (List of Software Component Versions) and it show me the list but cannot view the Name of the SWC created.
I cleared the cache (Environment - clear sld data cache) and the result it's the same, not show the SWC the I created.
Do you have any idea?
Thank you in advance.
--ervaHi,
as it's a new installation, you certainly missed something. have you did controls of Readiness Check doc and tcode SLDCHECK ([see PI 7.1x oss note|https://service.sap.com/sap/support/notes/1143810]).
and check these post installation controls (but it's for PI 7.1): [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60d2a693-9504-2b10-5ba7-82964bd8370e?QuickLink=index&overridelayout=true]
Mickael -
Some Software Component Versions do not show up in transaction sproxy
I have a landscape with a CRM system, a PI system (with the SLD on it) and some other systems.
In transaction sproxy in the CRM system the Software Component Version SAP CRM ABAP 7.0 shows up, but others that should be there like SAP ABA 7.01 are not there.
So I went on the SLD and edited the technical system for the CRM system, I added the product SAP CRM 7.00 and set the checkmark for installed for the relevant SWCVs like SAP ABA 7.01.
I then went to the business system for the relevant CRM client and there also checked those SWCVs.
But still they do not show up in transaction sproxy in the CRM system.
What am I missing?Hi Monika,
There's several suggestions that you could look at to help resolve your problem in this thread:
[Can't find ESA ECC-SE 603 SWCV;
Regards, Trevor -
Problem with importing software component versions from SLD to I.R
Hi Guys,
I have some problem in importing my software component versions from SLD to IR. While connecting to SLD it is using the port 50100. Instead of 50000. We are manually correcting it while connecting to SLD. but when we try to import the Software Component Versions from the SLD to IR. It is saying no objects available in 50100. It is not connecting to port 50000. Pls any body help me with some solution. Thanks in advance.
Regard's
Kiran.BIn the Integration Builder page, Click on the Administration and check the following parameters to make sure they are pointing to right SLD system and port.
com.sap.aii.connect.cr.httpport,com.sap.aii.connect.cr.name,com.sap.aii.connect.landscape.httpport,com.sap.aii.connect.landscape.name
Also check with Tcode SLDCHECK too -
Software Component Version cannot be changed after Importing Objects
Hi Gurus,
I was trying out the import export function of XI. I export a message mapping and then re-import it back into XI. However, after doing that, it is telling me that the Software Component Version cannot be changed. I'm now unable to make any changes to any of the objects.
Is there anyway to go ard this?
Thanks in advance.Hi,
I tried ticking the check box. But its giving me the following warning
Originality indicator for the software component version set later Ensure that the software component version only contains one original repository
i ignored the error and activate the change list.
However, im still unable to make changes. I tried ticking the "Original Objects" as well but still unable to change.
Thanks. -
How to delete/remove the software component from integration repository
Dear All
How to delete/remove the software component from integration repository which we have created some Data and message types.
Regards
BlueHi,
Follow the steps below to delete the Software component:
1. Delete the created Data Types, Message Types, Message Interfaces, Message Mappings, Interface Mappings and other imported objects like RFC's or IDoc's. Activate all changes.
2. Then delete the namespace and the default datatypes present with the namespace after checking "objects are modifiable".
3. Then delete the SW component, after placing the radio button in "Not permitted".
Regds,
Pinangshuk. -
Unable to read software component versions from System Landscape Directory
Hi XI,
Once I could import software component version but now I can't. Maybe I did something wrong in SLD.
Could you please give me some hints?
Thanks,
Brucehi,
i have also problem with "import software componenet version "
i got a message like
"unable to import software component version from
system landscape directory ......."
than i gone for SLDCHECK...i got an error it is ............
calling function LCR_LIST_BUSSINESS_SYSTEM
Retreiveing data from the sld server function call returned exception code 4
connection to sld does not work
check sld function and configuration
what that i have to do ...to make it work ....please give me any solution for that please give me detailed info
with regards
Edited by: praneeth mamgunta on Jun 27, 2008 4:04 PM
Edited by: praneeth mamgunta on Jun 27, 2008 4:07 PM -
Error in Integration Scenario: No software Component version exists
Hi Experts,
We have external product and software component like Product "Project Management" we have imported the CIM content for it
Now when we create an Application Component for the same in Integration Scenario in ESR (PI7.1)
while trying to do right click --> Edit Action it gives Error
"" No imported software component version exists for product"
Also note that it allows us to Add new Action there
that is we can right click --> Add action
Kindly help with your suggestions to resolve this << Moderator message - Everyone's problem is important >>.
Regards,
Jagadish
Edited by: Rob Burbank on Nov 10, 2010 3:56 PMHi Experts,
Tried the steps given in SAP Note: 768148
Still it is not resolved.
I appraiciate if any one suggest some more options to resolve this.
Regards,
Jagadish -
Unable to import software component version from sld
hi,
i have also problem with "import software componenet version "
i got a message like
"unable to import software component version from
system landscape directory ......."
than i gone for SLDCHECK...i got an error it is ............
calling function LCR_LIST_BUSSINESS_SYSTEM
Retreiveing data from the sld server function call returned exception code 4
connection to sld does not work
check sld function and configuration
what that i have to do ...to make it work ....please give me any solution for that please give me detailed info
with regardsHi,
Make sure you have did all the configuration.....
http://help.sap.com/saphelp_nw70/helpdata/EN/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm
cheers
Sunil. -
How to update objects of sub software component version?
I have two SWCV, say SWCV_BASE and SWCV_DERIVE, SWCV_DERIVE is based on SWCV_BASE. So the objects which belong to SWCV_BASE are also availabe in the BASIC OBJECTS directory under SWCV_DERIVE.
My question is:
When I make some change in SWCV_BASE, how to reflect this modification to the SWCV_DERIVE? Currently whatever I do to SWCV_BASE, the change can't be transferd to BASIC OBJECTS in SWCV_DERIVE. Does anyone know how to syncronize the objects in SWCV_DERIVE to get the newest ojbects in SWCV_BASE.
MUST REWARD FOR GOOD ANSWERS.
Regards,
HuiHi, Michal
I forget to activate it. Yes, it's really... Forgive me:)
I have another question which has confused me for long time. It would be apprecaited if you could give me some light. According to sap documentation, through sub software component version we can reuse or do some customer modification to some SAP XI OBJECTS. But when I import some SAP software component version like SAP BASIS 6.20, I find nothing inside it. So when, how and where can we use SAP XI OBJECTS?
See the scenaio below:
An R/3 system is going to transfer data with a database.
R/3 (IDoc) <-> Database (JDBC)
IDocs can be devided into two types:
1. idocs shipped by SAP.
2. customized idocs.
In my understanding, when I import some sap software component version like SAB BASIS 6.20. I should be able to find the SAP shipped idocs. But nothing is there.
So Should I import the SAP shipped idocs into the SAP software component version? Then create a customized software component version based on SAP component version, where I import the customiyed idocs.
Could you give me some advice?
Thanks in advance.
Regards,
Hui Wang -
Unable to read software component version from System Landscape Directory "
I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
A) Is my understanding on resolution correct?
Should I go and apply notes 940309 and create client copy of existing client 001
OR
change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
B) Here is what I have done and the error:
1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
2) When I import the SWC from integration repository getting error
(Unable to read software component version from System Landscape Directory "server:5<system number>00").
C) Pointers used from the forum to debug the issue, but still no luck
Below are the points checked from the forum and all steps are correct, but still have issues with the import
1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
4) logged using PIAPPLUSER http://server:port/sld and it works
5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
Notes: 940309
You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
You don't want to use the default client 001, but another client as Integration Server.applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
Note:
I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
1. Call the wizard-based configuration tool as described in Configuration Wizard.
2. Select the scenario PI and the task PIPostInstallProcess.
3. Choose Execute.
A list of the steps to be executed by the wizard is displayed.
4. Choose Install.
Maybe you are looking for
-
Upgraded to Firefox 5.0.1 yesterday. No, after logging on to firefox, which takes me to my comcast page and when I try to get my e-mail I get this message "your browser sent a request this server could not understand. Size of request header field exc
-
Detecting the end of a session
Hi, Is there any way of detecting when a session ends? I'm wanting to carry out an action when the browser gets closed. Thanks!
-
EHP1 SAPehpi failing at phase REV_PRPEXTRACT/RESET_PREPARE
Hi Experts, I'm attempting to install EHP1, SP7 on to our Netweaver BI system. I've got as far as starting the SAPehpi installer and have hit a problem at an early stage: REV_PRPEXTRACT/RESET_PREPARE The error message displayed on the installer scree
-
Hi everyone! I've got a problem printing a report. I'm printing both side of a page. Then when I've got a odd page I have to skip to a new page. Then, I'd like to know if either that feature is possible or I have to print my report in a different way
-
I tried to buy a song, but they told me they need to verify the account, cause it was the first time I was buying with my macbook (which isn't true cause I bought songs the night before), and they asked me to answer my secret questions that I answere