Is it neccessary to have a universal adapter to connect my iPod to my audio system?

Is it neccessary to have a universal adapter to connect my iPod to my audio system/iHome? If I connect it without one will it mess anything up?

The adopt er just a piec of place the helps support the iPod so the movement and thngs wil not damage the dock connectoer area of the iPod or the dock. Here is the adopter for the 4G iPod.
iPod Universal Dock Adapter 3-Pack...

Similar Messages

  • My hard disc crashed and I have no back up other than the music I have on my ipod. I have downloaded Itunes onto my new hard disc but I have read if I just connect my ipod it will wipe everything on the latter rather than upload from it ?

    My hard disc on my laptop crashed and I have no back up other than the music on my ipod.
    I have downloaded Itunes onto my new disc but I have read if I just connect my ipod it will wipe it rather than update my laptop ?
    What can I do ?

    Welcome to the Apple Support Communities
    You have to transfer the music from your iPod to iTunes. There are some third-party applications that can do it > https://discussions.apple.com/message/11319208#11319208

  • Do I need Apple's universal dock to connect my iPod to a tv.

    I was wondering can i connect iPod to a tv from the headphone jack. Can someone please help?

    Apple iPod AV Cable is stereo audio/composite video only. S-Video requires iPod Dock according to local Apple Store. (None have yet to arrive in our area and I am anxiously waiting them to come in so I can return the unopened Color iPod dock I bought by mistake.

  • Be patient if you have lots of files and connecting new iPod

    Having iTunes lockup after you connect your new iPod? Do you have lots of audio files (in the thousands)? Well read on if this sounds like you.
    Just had to post this as I didn't see anything at all about it and it would have been REALLY helpfull to know before hand. I have about 8000 songs on my computer (all from my CD's or purchased iTunes). Well I finally decided to get me a nice new iPod as it would make life a little better. I got home connected it then my system pretty much locked up, or seemed to. The performance meters went up to 80-90% and computer wouldn't respond. iTunes totally crashed with no display or warning or anything. I went into task manager and killed it. The moment I did that the computer shut down and restarted. When it came up I tried again, but this time when I started iTunes I got "Windows - No disk inserted" faults like crazy.
    I eventually just left it and went outside for a break as I am pretty much going to return iPod to store at this point. After about 15 mins I come back to computer and all is ok and now I see the iTunes is transferring files. All without asking me anything, almost sounds like a microsoft trick except this is all apple's doing, that isn't going to make me buy a mac anytime soon if that is the direction they are heading in.
    Anyway after my very long winded soap box, the main point is if you plut it in and have lots of songs be very very patient because it will download the songs to your iPod and there is no way to stop it that I saw.
    custom   Windows XP  
    custom   Windows XP  
    custom   Windows XP  

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. It is likley that they will exchange your iPod for a refurbished one for this price:
    Apple - Support - iPod - Repair pricing

  • Universal adapter

    I working now for a while with obi apps in combination with as source Ebs R12. I'm at the stage to use a other source. I want to ask you if my 'thinking' about the universal adapter are right.
    For every source who has no adapter embedded, you can use the universal adapert container. In the DAC you won't directly connect to the source(like you do with oracle EBS as source), but use the csv files in the srcFiles map. So simpely say:
    When you want to load 'human resources' in your warehouse. You have to find out wich csv files are all needed. Then, you have to get the data what's needed form the source and insert it in the csv file. In dac you can use the universal container and in this case human resource execution plan, to load the data in your warehouse.
    Am i right??

    Did you use such source by yourself. Or is it just what you think how it should work. I also think, that using all those csv files, as aternatice source is a little bit crappy.
    Anyone else know how to work with those csv files. And are they the source to use, if you work with the universal adapters.
    tnx in advanced..
    Edited by: user565199 on 15-mrt-2010 2:40

  • Configuring OBI Apps 7.9.6.3 When Using Universal Adapter Exclusively

    Hello experts,
    I have been working for a few days in trying to configure a fiscal calendar with universal adapter flat files as the only data source because Great Plains is the data source and since Oracle does not support it, we use universal adapters. We have had limited success with this but in configuring OBI Apps 7.9.6.3 and doing normal configuration things such as configuring fiscal calendars and mapping GL accounts to group accounts using the Universal Adapter in DAC, there is virtually no documentation. In fact, when I Googled the universal adapter version of the group account codes file, there were 0 Google entries for it.
    I am sending this new thread in the hope that someone out there has successfully configured OBI apps 7.9.6.3 using the Universal Adapter and can point me to documentation of any sort other than the normal Oracle OBI Apps Config Doc which only briefly mentions it and then takes file examples that are OOTB and unconfigured in any way.
    Specifically, I need assistance in getting fiscal calendars working with the Universal Adapter. I have W_MCAL_DAY_D populated and all of the Gregorian calendar tables. However, the remaining W_MCAL* tables only have one row in each of them. I have an SR open about it but no success resolving it yet. While doing the configuration work, we tried to map GL accounts to group accounts but there is no account range in the Universal Adapter source file unlike the Oracle EBS version so I am unsure on how to configure group accounts. Oracle documentation only refers to Oracle EBS, PeopleSoft, and JDEdwards. I am unable to find anything regarding the Universal Adapter.
    If anyone has done this sort of OBI apps configuration before, please respond or send me URLs for related documentation. I am completely stuck and SRs are not yet helping so I thought I would try this.
    Thanks experts and looking forward to hearing from you.

    Hi Krish,
    You will have to create 20 Application Roles matching the Responsibility Names.
    Use one of the following methods to set up application roles:
    Create application roles in the policy store with the same names as existing responsibilities or groups in the source applications. Then, add the new application roles as members of Oracle BI-specific application roles groups, and the users will inherit this membership based on their own responsibilities or roles in the OLTP application.
    Add new Oracle BI-specific responsibilities (Oracle EBS and Siebel CRM Applications) or roles (PeopleSoft Enterprise applications) in the source applications, making sure their names match the object security application roles in Oracle BI Applications, and assign OLTP users to these new groups. The users will then inherit the application role membership in the same way as described in the preceding method.
    Application Roles in 11g are the Groups of 10g (http://blogs.oracle.com/robreynolds/entry/security_in_obiee_11g_part_2)
    Cheers,
    Daan Bakboord
    http://obibb.wordpress.com

  • Need documentation on Universal Adapter

    Hi,
    Can anyone provide documentation for the implementation of Universal Adapter in Informatica..
    Thanks in advance.
    Edited by: Vinay Donkena on Sep 5, 2010 11:46 PM
    Edited by: Vinay Donkena on Sep 5, 2010 11:47 PM
    Edited by: Vinay Donkena on Sep 6, 2010 12:00 AM

    I am also looking for the same. Do you have any inputs for the same? If yes, then please share it with me too.
    Thanks.

  • More details about Universal Adapter.

    Hi,
    I would like to know what is the Universal Adapter, what is its role and when can we use them.
    I am using OBIA 7.9.5. From the Installation and Configuration guide, I understand that the non-packaged data sources use the Universal Adapter. But I have not understood what does that mean in the right context.
    Thanks.
    Manoj.

    The Universal Adapter is simple yet complicated.
    Simple because all you need to do is generate a flat file (CSV) for the Staging Tables of the Application you wish to load. The documentation describes the structure of these files very well for CRM.
    It is complicated because you must verify you have the right data and create a refresh schedule so the new or updated flat files are generated on the same schedule (or slightly before) as your Execution Plan.
    I posted a thread on this topic, here is a link:
    Re: Configuration of SAP application with OBI application 7.9.5

  • Is a universal adapter ruining my battery?

    Hi,
    I've had my Mac for a little over a year now; I purchased it in August 2009 in the U.S. For the first 3 months, I used it in France with a European Mac charger to fit the adapters there.
    After that, I used it in the States with virtually no problems. But now, I've been in Korea for over 4 months and I've been using one of those universal adapters that you can buy at any convenience store. I'm not sure if this is messing up my battery, but something is definitely wrong.
    It first started when I was watching a movie on my laptop. The computer just shut off. I looked up possible problems on forums and thought it could be an issue with the fan. However, it shut off a few more times after that despite being on a hard surface and the fan working normally. It wouldn't turn back on until I plugged it back in (despite there being about 30% battery life left).
    Then, today, it was fully charged and I started watching a movie and within 15 minutes, the low battery warning popped up. Shortly after, while plugged in, I was trying to log-in to my email and it went to sleep! The system profiler says my battery life is poor. I don't mind buying a new one, but I must know: is that universal adapter damaging my battery?
    Charge Information:
    Charge remaining (mAh): 1222
    Fully charged: No
    Charging: Yes
    Full charge capacity (mAh): 1327
    Health Information:
    Cycle count: 325
    Condition: Poor
    Battery Installed: Yes
    Amperage (mA): 335
    Voltage (mV): 12602
    Thanks for reading. I'd appreciate any help I can get!

    Elysabeth wrote:
    For the most part, I tried my best to charge it fully and then unplug it until it was low battery again.
    Doing this every time you use your MacBook is the reason your battery has problems. Here are some tips to follow when you buy your replacement battery.
    Also using the plug adapter as you described does not hurt anything. Apple sells these as a kit, Apple World Travel Adapter Kit.
    You do not need to discharge your battery completely every time you use it. Li-Ion Polymer batteries like little charges instead of big ones. It is OK to leave your battery hooked to the charger most of the time. The only time I unhook mine from the charger is when I calibrate
    or use it for a short time. You should calibrate your
    battery every two months, if you use it unplugged regularly, to keep the battery fully functioning. If you use your MacBook infrequently it ís best to calibrate the battery at least once a month.
    A cycle,Determining Battery Cycle Count, is a full discharge and a full charge of the battery. This can happen by using the battery for 20% for 5 days and charging each time you used the battery. This would equal a 100% cycle. Charge the battery after each use, don't let it get lower just because you didn't use up all the power at one time. Its best in little charges. Don't worry if every once in a while you have to discharge completely when you are not near your power adapter. It happens. A little care and the battery can last years. Anything over 300 cycles means you should start considering replacing your battery.
    The following links have good information about the MacBook and MacBook Pro and the care of it's battery.
    Wikipedia: Lithium-ion polymer battery
    Determining Battery Cycle Count
    Apple Portables: Tips for maximizing your battery charge
    MacBook and MacBook Pro: Reduces processor speed when battery is removed while operating from an A/C adapter
    Apple Portables: Troubleshooting MagSafe adapters
    Apple Portables: Calibrating your computer's battery for best performance
    Apple Notebooks
    Battery Replacement
    Runaway applications can shorten battery runtime

  • Configure Universal Adapter 2 generate New BAW Tables or use Existings OBAW

    Hi Experts,
    i have a doubt on if New OBAW tables have to be created as we add new subject areas from Universal Adapter Containers
    or can use existing OBAW tables that are generated from Other containers.
    For Example:
    Our Existing contianer is PeopleSoft 9.0 and OBAW Tables are created usign Peoplesoft Container.
    of all the subject areas from Peoplesoft Containers, Only Workforce Profile and HR Payroll is used.
    as the container is created using Peoplesoft 9.0, all the Tables (532 tABLES) are created for all the subject areas.
    now, we are planning to use Universal Adapters to configure rest of the subject areas like Absence Managementr and Recruitment because they are maintained by Third Party Vendors which have no relation with Peoplesoft.
    my doubt is,
    1. if i can use the same Existing OBAW Tables for Universal Adapters or create NEW OBAW tables using Universal Adapter container.
    2. if ii have to create New tables using Universal Adapter containers, all the table belonging to other Universal Adapters Subject areas like Loyalty Analytics, call center analytics are also created by default. how to avaoid this. i tried to create OBAW by creating a container with Only HR-Absence Management subject area and Recruitment subject area, unfortunatley, all the tables are again created.
    3. it looks like there are common dimension files used for this Universal Subject areas, is it Mandory to use them to Populate HR-Absence Managment subject area.
    Please HELP
    Is there is a good refernce guides on how to configure all this espically with Universal adapters in Out side world or in Metalink
    Thanks
    Kumar

    Please take a look at this article which states SYSDATE is not supported in a
    where clause.
    http://www.oracle.com/technology/pub/articles/bpel_cookbook/qualcomm-bpel.html
    Excerpt from the article:
    Here are three important things you should do in implementing the above design:
    Have the status of the record being processed stored in the database. The status includes the process state, next process attempt time, and processing attempt count.
    Create an updatable view that exposes only records that are ready to be processed. A view is needed because the database adapter cannot handle a where clause that compares against SYSDATE.
    Design logic that determines if a process instance that has faulted should be retried and when the retry should occur. This information will be updated in the database by use of a stored procedure. This can also be done with an update partner link and additional logic in BPEL.
    mahalo,
    a iii

  • Universal Adapter with Home Audio Systems

    I recently purchased the Universal Adapter for my Ipod in order to make it easier to connect and disconnect from my home audio system. Things work fine when the Audio cable is directly connected to the port in the Ipod, When I place the Ipod in the Universal dock and try to use the "line out" in the dock, either no sound or very muffled sound occurs. Anybody have any ideas?

    It seems likely that it will .I am expecting it to

  • Universal Adapter Bracket for M55 8808

    I have a Lenovo ThinkCentre M55 8808 desktop, and its hard drive died about two months ago. Fortunately, I had access to an old HP laptop that had some other parts gone bad, but still had a good hard drive. The problem is that the laptop drive is a 3.5" inch drive, while the drive that went bad was a 5.25" drive, so I need an adapter. The parts manual available online for my PC lists the "Universal Adapter Bracket 5.25 to 3.5-inch (all models)", FRU# 32P4743 for this purpose. However, this part seems very scarce. I only saw it for sale online at one or two places I never heard of for $30 or more, which is more than I would like to pay for it.
    Does anyone know of a place where this part can be obtained affordably or of a different part that might work? I tried getting a CMS Products Universal Mounting Kit from Staples, but had to return it because it wouldn't fit.
    Thank you.
    - RJ
      USA
    Solved!
    Go to Solution.

    Thank you.
    We bought something similar to the 2nd item you linked to.
    Since that item's Description included the statement:
        **NOTE** This bracket is only for side mounted hard drives. **NOTE**
    we felt more comfortable ordering a BYTECC BRACKET-25350 2.5" Mounting Bracket Universal Adaptor For 3.5" Hard Drive.
    The eBay listing showed a picture of a 2.5" drive mounted in the bracket,
    and the manufacturer's listing for it included the statement:
        Universal Mounting screw holes for variety computer cases, rack mounted PC.
    That bracket works.

  • Parameter Filenames in Universal Adapter With Filenames In SrcFiles Dir

    Hello Experts,
    We are running DAC 10.1.3.4.1 and Informatica 9.0.1 HotFix2 and are in the process of trying to get an OOTB DAC Execution Plan to complete. We are able to build a plan but run into issues when running. We created a custom execution plan called TEST with one subject area (Financials - Cost of Goods Sold) and when the plan is built, 248 tasks are generated. Only 9 complete succcessfully.
    When looking at the details of a specific workflow within the Informatica Workflow Manbager, i.e. SDE_Universal_ProjectDimension, we find that within the workflow properties, the Parameter Filename Attribute = $PMSourceFileDir\SDE_Universal_Adaptor.SDE_Universal_ProjectDimension.txt. On our file system, the file is named, $PMSessionLogFile=FLATFILECONNECTION.DBCONNECTION_OLAP.SDE_Universal_Adaptor.SDE_Universal_ProjectDimension.txt. The task fails because it cannot find the file. We believe the different filenames are the reason but are posting this thread because we cannot figure why or how to get the filenames properly synched.
    So you know, we are using a data source that is not an Oracle supported data source, hence we are using DAC's Universal Adapter to bring in flatfiles, like the one above for instance.
    Please help,
    Thanks

    Hello,
    I don't think it was the source of your problem. It is always the case: DAC generates always SrcFiles with a name='Physical Data Sources Name'.'???'.'Informatica Folder Name'.'Mapping Name'
    Where does your file FLATFILECONNECTION.DBCONNECTION_OLAP.SDE_Universal_Adaptor.SDE_Universal_ProjectDimension.txt created ?
    Does this path equal to the DAC variable InformaticaParameterFileLocation declared in the DAC System Properties tab (menu Setup) ?
    Hope it helps,
    BLO

  • I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or atleast maintain the charg over longer periods of time? I have a dc adapter. thanks

    I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or at least maintain the charge over longer periods of time? I have a dc adapter. thanks

    You should be able to use the battery if you get a car type charger which recharges mobile devices.
    The full size iPads use a 10-12W charger, whereas the mini uses a 5W charger. Many car chargers only supply 5W. But at 5W, the car charger should give you some extra time on your iPad. It would be best to use a 10-12W car charger.
     Cheers, Tom

  • HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    Hi alangium,
    Welcome to the Support Communities!
    Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    This article may provide some information about your Mini DisplayPort to AVI adapter.  Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/HT3382
    18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
    The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573#5
    How can I detect displays?
    If the detect displays option is not available, hold down the Option key while you are in the Display pane.
    How do I select additional resolutions on my display?
    You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
    To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
    I hope this information helps ....
    - Judy

Maybe you are looking for