Is it necessary to include the add-on when R/3 4.7 x110 upgrade to ECC 6 ?

Dear Expert:
I trying to do the R/3 4.7 x110 upgrade to ECC 6
at the PREPARE process >> extension model >> UPLOAD_REQUEST phase.
it asked me about the add-on CDs or support package.Yes or No
I'm wondering do i need to put any add-on CDs or components during the process of Upgrade?
is it necessary ?
and I only got a add-on CD 51031096_SAP_AP_7.00 Add-on installation base on SAP Basis Release 700
is it the right one?
don't know how to answer this steps...
Regards
Jack Lee

Hi Jack,
Yes you have to include all required Support Pack & Add-ons which are seen in Prepare Phase. Once you click Next you will get the Equivalent Level of Add -on & Support Pack.
Regards,
Darshan Sarwade

Similar Messages

I have uninstalled and reinstalled the most current edition of Adobe Reader, including the patch. When I open a PDF file, the screen is first grey, then viewable, but the message "Adobe Reader has stopped working" comes up. How do I remedy this?

I have uninstalled and reinstalled the most current edition of Adobe Reader (11.9), including the patch. When I open a PDF file, the screen is first grey, then viewable, but then the message "Adobe Reader has stopped working" comes up. How do I remedy this?

RR,
One thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way (remember to tick Paste remembers Layers in the Layer palette flyout/dropdown first, and to untick it afterwards).
Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
and another similar website,
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
As far as I remember, the former is for Win and the latter for Mac.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html
Failing a full recovery, hopefully you have one or more earlier versions and/or bits of artwork saved before it happened.

Does the basic photoshop CC include the Stencil.std font or do I need to upgrade to the next level?

does the basic photoshop CC include the Stencil.std font or do I need to upgrade to the next level for individual at $19.95?

Here's a list of fonts included with Photoshop CS6
Fonts Included with Photoshop CS6 and Photoshop Elements 10 | Techinch
I'm not sure if Adobe has a list of what they bundle in CC,but I will ask.
And here we go: Photoshop: What fonts are Included with Photoshop?
Gene

How can I include the Frame Number when using "Export Frame"?

Im using the button at the bottom right of the Playback Control Panel called "Export Frame". This does exactly what I need but I have a lot of frames that need single frame exporting. How can I get the file name to automaticly include the frame number at the end of the file name?
For example, instead of it displaying "Sequence 01.Still001" by default. I would like for it to display "Sequence 01_0001" Letting me know that is frame 0001.
This is possible, correct?

Well what about in the export option using CTRL + M? I saw a coworker using this method in an older version of Premiere, but we can't enable it on CS5.5. Being able to export a single frame as a bmp that has the frame number at the end of the file name.
Example:
Output Name: Sequence 01_0001.bmp
Under Video Basic Setting is:
Export As Sequence UNCHECKED
Field Type: Progressive
Frame number still doesn't show at end of file name. What are we missing?

Can I include the FILE NAME when printing from Bridge?

I'm a commercial photographer. I shoot with my camera tethered to a Mac laptop to view images immediately as I shoot. I use Bridge to view these images.
As I shoot, we save the file by product name, and then print proofs immediately. I need to include the File Name on these prints. Is
there a way for me to do this directly from Bridge? If not, can you think of a way using Photoshop? Or anything else? Lightroom?

Guessing you are using Bridge CS4 you could use the Adobe Output module for
this. It is reachable through a seperate workspace in the top menu right
side or the left side top menu the icon most right.
You can create different lay outs as a PDF with this but for you it should
be one per page and select the filename (with or without extension). Just
explore the posibilities. For CS4 you could use the updated Output Module.
If on CS3 you could use the contact sheet script for Photoshop that in
Bridge can be reached by the menu Tools / Photoshop / contactsheet. This
contactsheet script is also usable for CS4, it is on the Goodies install
disk for PSCS4
As I shoot, we save the file by product name, and then print proofs
immediately. I need to include the File Name on these prints. Is
there a way for me to do this directly from Bridge? If not, can you think of a
way using Photoshop? Or anything else? Lightroom?

All screens jump including the desktop screen when using the pad and pointer. How do I stop this?

All screens move around including the desktop when navigating with the pad and pointer. How do I stop this?

Jump around. Perhaps you could elaborate - what seems to be moving around, and under what conditions? Even better if you could include pics or movies of this behavior.

Convert catalog from PSE 6 to 10, is it necessary to include the jpegs?

Hello
I am testing PSE 10 (from PSE 6) and have copied the catalog to a test XP box (but not the jpegs). The catalog refuses to convert with an unspecic error: "Catalog conversion failed" see "Catalog Conversion Errors" for more details.
PSE 6 can find no problems with the existing catalog and I have worked trhough eg http://kb2.adobe.com/cps/515/cpsid_51525.html .
If the conversion process requires the jpegs etc. then that will certainly cause a problem, they are not visible to this PC! On the other hand, if it is simply a matter of converting the catalog without reference to the source files then there should be no problem.
I am reluctant to allow a conversion process to break a very considerable investment in effort in the PSE6 catalog and want to see it work (and have useful benefit to me) before committing the original.
Some rough statistics: 45,000 images, 140GB data, catalog is around 1.5GB. It takes about 3 mins for 'repair' to run (having forced a 'repair anyway') and under 10 mins for 'optimize'.
I should add that I have run the psedbtool and while it finds that two drives are missing (E: and F:), there are no missing files. E: and F: are USB backup drives and are not connected, nor would I expect them to be. All photos are in one (top level that is) folder on one drive. If the convertor can only run when the backup drives are connected, that seems a little odd.
If the only option is to restore the backed up PSE 6 archive into PSE 10, that is do-able, but I was trying to avoid doing that.
Perhaps the more pertinant question is "what does PSE 10 offer that I haven't got in PSE 6?". So far I have not found any really useful function, maybe a couple of the irritating bugs have been fixed? (Mostly the date orderby bug) I have lived with the multi-core hang since PSE 6 came out and don't use PSE to catalog my raw files, so that fix has no benefit to me.

Well after an all day effort, I have a working W7 64 bit with a spare 1TB drive and all the updates done (about a 2GB download). That has taken about eight hours. Then recover the PSE 6 created backup files into PSE 10, (took about three hours) and for good measure forced a repair and optimize on the catalog. No errors at any point.
PSE 10 crashes when in slide show view. Sometimes it gets through about two images, sometimes 100 or so, but always it crashes. So I am ready to give up, PSE 6 is stable at least (though I have yet to try PSE 6 under W7 64bit, my standard PC is W XP 32 bit).
One possible benefit of W7 is the color fidelity is better (I have color calibration too). The management of the twin screen is not better though, PSE keeps vanishing from view (this is not related to the crash) and has to be coaxed back onto the secondary screen. PSE 6 under XP gets this right.
I checked the arm chair arm image again, it is the wooden arm of a director's portable chair seen from the side, no matter how I try I can't see a face in it. I realise now that the 'obvious' faces that get missed are when the eyes are not horizontal, even a small turning of the head results in the face being missed.

Having installed "Puzzle" it is not included in the right click menu when I open a photo, how do I include the add-on to my right click menu?

I installed the Puzzle 0.4.6 add-on which is supposed to add the "Puzzle" item to the main context menu, but when right clicking a picture it does not give the option to open with the puzzle add-on.

Hello '''cor-el''' I now understand, I can open a web based photo and it does give me the puzzle option, but not with photos stored on my computer.
Thank you for your reply, much appreciated.

How to include the NIWebAppServer.conf when building a web service installer in LV2010

Hi all,
I'm build a LabVIEW 2010 web service and creates a deployable setup installation as described in Web Services FAQ:
http://zone.ni.com/devzone/cda/tut/p/id/7747#toc12
but also would like to include my .conf file for the NI Application Web Server. The file is located in:
C:\Program Files\National Instruments\Shared\NI WebServer\NIWebAppServer.conf
This is where all settings (listening ports, SSL, users etc.) are configured.
If I look in LabVIEW 2009 build instructions for web services:
http://digital.ni.com/public.nsf/allkb/62B9C2D5C91EE8B28625778800609FF2?OpenDocument
they include this file, but it is a new procedure in LV2010 (as seen in the top link) and I can't seem to get this conf file included and installed on the deployed system automatically for LV2010. Today, I must copy it manually.
Any ideas of how to do this?
Thanks,
Mattias

Having the same problem, even if pointing the installer to install the particular file, the installer will install its own some default file. Did you find any solution?
/Carl

I have Mac OS X 10.4 - but Firefox 3.6.18; keep being harangued by your drop down window saying load Firefox 4 or 5; I do this including Adobe add-ons, but my Firefox edition does NOT upgrade. I am 65yrs, self-taught and stupid about computers.

This happens from time to time and I do comply to update my system. I think there is an incompatibility. I cannot afford to update my Mac to a more modern version which is where I suspect the incompatibility may lay.
I would not have known I needed to update Firefox without at least four occasions in which I have tried to upload Firefox 4 (no.4 I believe), at least four times because window was insistant, plus Adobe add-ons or flash player. Later I check and find what I have tried to do doesn't work or become more than what I already have.

This happens from time to time and I do comply to update my system. I think there is an incompatibility. I cannot afford to update my Mac to a more modern version which is where I suspect the incompatibility may lay.
I would not have known I needed to update Firefox without at least four occasions in which I have tried to upload Firefox 4 (no.4 I believe), at least four times because window was insistant, plus Adobe add-ons or flash player. Later I check and find what I have tried to do doesn't work or become more than what I already have.

The add-ons installed but don't work after upgrade to 3.6.13 Arabic

All installed plugins

Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the "Find Updates" button (in Firefox 4: right-click the extension -> "Find Updates") to do a compatibility check.

Firefox does not autofill the userid & password when i go to websites after upgrade to 6.0.2

i used to be able to type the first letter of a userid or double click on the userid field and firefox would show all my userid options and then autofill the password. when i upgraded to 6.0.2 it wouldnt do it anymore. i double checked and all my userid and passwords are still saved in the options>password area in firefox. i typed in my userid and passwork for the site and now that is the only one that will pull up when i go to the site. why wont this function work the way it used to? Also, when i paste the troubleshooting information, i get a warning that there are too many characters. Why ask that it be posted if it cant handle the info? maybe i have too much goin on in the troubleshooting information...feel free to comment on that (i deleted a BUNCH of "print.printer" stuffso it would send. Thanks

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode"

The version 2008_1_620 of the Add-on ST-PI is too high for this upgrade

Hi Guru,
I' am doing prepare : upgrade from R/3 entrerprise 47X100 to ECC6.0 SR3.
PREPARE
02)                       Initialization     failed        yes
the checks.log report the following error :
SAPup> WARNING: The version 2008_1_620 of the Add-on ST-PI is too high for this
upgrade (> 2005_1_700).
                To avoid loss of data it is necessary to include the latest avai
lable version for the Add-on
                in the IS_SELECT phase.
                Please refer to Add-on note 69455 for further information.
I can't go on , How can I include the add-on in the upgrade ? the phase for include the add-on upgrade is 04) Extension   but i cannot skip phase 2    ? ! ? !
OSS note 69455 does not contain valid information.
thank's for the answer.
Regards Antonio.

Hi
I got the same error and it actually prevents from getting further, because its treated as an error.
"ERROR: To be able to use ASU Toolbox, your system requires at
       least Support Package Level 8 for the ST-PI software component
       For more information, see the upgrade documentation
WARNING: The version 2008_1_620 of the Add-on ST-PI is too high for this upgrade (> 2005_1_700).
         To avoid loss of data it is necessary to include the latest available version for the Add-on
         in the IS_SELECT phase.
         Please refer to Add-on note 69455 for further information."
2008_1_620 does not have a level 8, so it must be refering to the 2005 version of ST-PI.
Update SAPup.exe (in <upgrade dir>/bin) to newest version.
Regards
Kim
Edited by: Kim Hynek on Mar 30, 2010 11:36 AM
Edited by: Kim Hynek on Mar 30, 2010 11:40 AM

How do I turn off the add-on bar so it doesn't turn itself back on?

By right clicking on the menu I can turn on or off the various toolbars including the Add-on bar. But if I create a new tab or new window it turns on the add-on bar again. How can I turn it off so it does not reappear?

I have extension McAfee SiteAdvisor. And yes if I disable it the troublesome add-on bar stops reappearing. But SiteAdvisor does useful things even without displaying the add-on bar.

Close the add on

Hi Dear;
I have created an add on and it's working fine
but
when i close sap business one the add on process still running (i can see that still running in the windows task manager).
and when i open sbo another time the add-on works properely.
but when i close it the add-on appears twice in windows task manager.
that's mean if i run sbo with the add-on and close it N times the add-on appears running N Times in windows task manager.
the question is:
which code and where i have to write to stop the add-on when i close sbo.
thank you Dear;

i would do it so (when you're really using vb6)
in your SBO Class module:
Private Sub appl_AppEvent(ByVal EventType As SAPbouiCOM.BoAppEventTypes)
    Select Case EventType
        Case aet_ShutDown
            End
        Case aet_ServerTerminition
            End
    End Select
End Sub
Private Sub Class_Terminate()
    End
End Sub

Is it necessary to include the add-on when R/3 4.7 x110 upgrade to ECC 6 ?

Similar Messages

Maybe you are looking for