Is it necessary to manually set cpu and ram specs in bios anymore?

I just ugpraded with a K8N Neo2-F board, and Venice 3500+ cpu. I didn't do anything in particular with the cpu/ram spec settings in the bios. CPU-Z recognizes the cpu as a venice core 3500+, using multiplier 11 and fsb clock 200mhz, and the ram is recognized as 1GB pc2700, with assorted clock settings. The ram is from Crucial and was spec'd out to my old MSI KT4AVL board, so I looked the same ram up again at Crucial.com, but it didn't list the various clock settings anywhere in the specs on that particular chip online. At least the CAS Latency is showing up correctly in CPU-Z, from what the label on the ram says. Should I just assume the other clock settings are correct, too? How can I find out what they should be for my ram? (I know - I should probably be using Corsair DDR400's like everyone else here, but $ is tight so I just reused what I had...)

RAM timings should be set up if you want the best performance. Alot of times the motherboard is able to determine this but not always. In CPU-Z there are two tabs related to memory. One is SPD which should show you the recommended timings for your memory, the other tab Memory should show you what your memory is currently running out. If they are different I would go with what is listed on the SPD tab and put those values in the bios.
It would definitely be beneficial to upgrade your memory to 2 PC-3200 matched sticks, so you get the speed increase from the increased memory bandwidth and also so you can get dual-channel. I would put memory as the top priorty for the next item to get for the computer.
Good Luck
Jeremy

Similar Messages

Z77A-gd65A boot error code 15 rebthing i removed all except cpu and ram and oot

my pc used to work fine yesterday i shut it down and started it today and it kept cycling rebooting at code 15 on debug i changed to bios B and the same thing did clear cmos both ways even removed the battery the same also removed all except cpu and ram but still the same result please help !

I have no idea how you possibly could corrupt bios A if you weren't running Live Update or manually attempted to flash. if bios is really corrupted follow: >>Flashing a Corrupted bios when the alternate bios still works<<

MOVED: getting most ffrom my cpu and ram cinfigd in the bios

This topic has been moved to Overclockers & Modding Corner.
getting most ffrom my cpu and ram cinfigd in the bios

You can use CPU-Z to check your settings. I find it best to just use good ole bios overclocking. Set ram 1:1(FSB/Dram ratio) and FSB to 200 that that should give you 2200Mhz.

Where to see CPU and RAM usage in IPAD 1

Hi:-)
While i have Apps running , I would like to be able to see CPU and RAM in use..and ideas how/where?
Thanks

There are several apps in the app store that can show you cpu and ram usage of your device, e.g. "system info"

CPU and RAM size for database

How can we see what is the CPU and RAM size for the database?
<div class="jive-quote">select * from v$version</div>
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE     10.2.0.5.0     Production
TNS for HPUX: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production

cat /proc/meminfo
root:     total:      used:      free:           shared:     buffers:     cached:
Mem:      1055760384     1041887232     13873152     0     100417536      711233536
Swap:      1077501952      8540160      1068961792
MemTotal:          1031016 kB
MemFree:          13548 kB
MemShared:          0 kB
Buffers:          98064 kB
Cached:               692320 kB
SwapCached:          2244 kB
Active:               563112 kB
Inact_dirty:          309584 kB
Inact_clean:          79508 kB
Inact_target:          190440 kB
HighTotal:          130992 kB
HighFree:          1876 kB
LowTotal:          900024 kB
LowFree:          11672 kB
SwapTotal:          1052248 kB
SwapFree:          1043908 kB
Committed_AS:          332340 kB
cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 31
model name : AMD Athlon(tm) 64 Processor 3000+
stepping : 0
cpu MHz : 994.927
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce (snipped)
bogomips : 1956.97
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp

Manually Setting x- and y-offsets

I work in the IT department for a health system and every night after the business office closes, we are the ones who print of the claims and bills. Right now we do this using a HP LaserJet 4300n because it allows us to manually set the x- and y-offsets of each drawer. This way we can line the pages up with the two different government forms we print on. Now, the LJ 4300n is a very old printer model and we're now playing Dr. Frankenstein and trying to create some monster that will at least continue printing, but we have a ton of issues because everything is so old and worn out. The problem is, we can't find any newer printers with the option of manually setting the x- and y-offsets for each drawer (individually) like you can with the LJ 4300n model. Does anyone know of any printer that will allow this type of configuration? If not a printer, maybe a software that allows me to set the offsets prior to printing? Keep in mind, we're printing text files from a medical application, so the software would have to modify the printer, not the file.

I'd imagine that quite a few of the recent and current printer models intended for departmental use would include this degree of configuration. For example, from the User Guide manual for the LaserJet Pro 300/400 M351/M451 models (these are colour, not monochrome devices): My LaserJet Pro 400 Colour MFP M475dn model (MFP equivalent of M451) does indeed have these items on the referenced menu (although they don't appear to be exposed via the equivalent Embedded Web Server interface).

Kernel_task is spending too much CPU and Ram

I have Macbook Pro 13' mid 2012 I bought it 9/2013 and its started to become too slow like seriously slowed when I check the Activity Monitor kernel_task spend too much RAM and CPU and because of the usage of CPU my computer becomes overheated. This what comes up when I do the EtreCheck;
EtreCheck version: 1.9.15 (52)
Report generated 5 Sep 2014 18:00:42 GMT+3
Hardware Information: ?
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: (null)
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:36:17
Disk Information: ?
APPLE HDD HTS547550A9E384 disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 499,25 GB (321,73 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ?
Logitech USB Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Anywhere
Kernel Extensions: ?
[not loaded] com.devguru.driver.SamsungACMControl (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungComposite (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.20 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.20 - SDK 10.6) Support
Startup Items: ?
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.skype.skypeinstaller.plist Support
[loaded] com.teamviewer.Helper.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.BlueStacks.AppPlayer.LogRotator.plist Support
[loaded] com.BlueStacks.AppPlayer.Service.plist Support
[loaded] com.BlueStacks.AppPlayer.UninstallAgent.plist Support
[loaded] com.BlueStacks.AppPlayer.UpdaterAgent.plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ?
None
Internet Plug-ins: ?
DirectorShockwave: Version: 12.1.3r153 - SDK 10.6 Support
Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Safari Extensions: ?
Searchme-2
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
BlueStacks Install Detector: Version: 0.3.6 - SDK 10.7 Support
3rd Party Preference Panes: ?
Fan Control Support
Flash Player Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
      22% Skype
      10% WindowServer
      7% coreaudiod
      4% Google Chrome
      3% sysmond
Top Processes by Memory: ?
181 MB Skype
84 MB Google Chrome
61 MB mds_stores
57 MB systemstats
57 MB WindowServer
Virtual Memory Information: ?
1.48 GB Free RAM
1.51 GB Active RAM
392 MB Inactive RAM
637 MB Wired RAM
561 MB Page-ins
0 B Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Measuring the cpu and ram consumption of a given query in sql server

hello there how you doing and am new to this sql server forum and i suddenly popped to ask questions related to sql server
and my question goes like this
in sql server i have table called testt and it have more thna10000000 records
and i have written a query select * from testt limit 9000000; and what i want is to measure the
CPU consumption of this given query=???????????????
and
RAM consumption of this given query=???????????????
Time consumption of this given query=?????????????? this i will get it from the result bar but i don't know whether it is correct or not
any help on this it may be query, tool or configurations all are acceptable and appreciated
10Q for letting me ask questions and feeling freely.

Please check these queries and this may helps you to get whats happening on with CPU currently..
SELECT getdate() as "RunTime", st.text, qp.query_plan, a.* FROM sys.dm_exec_requests a CROSS APPLY sys.dm_exec_sql_text(a.sql_handle) as st CROSS APPLY sys.dm_exec_query_plan(a.plan_handle) as qp order by CPU_time desc
Top 50 CPU usage :
SELECT TOP 50 st.text
               ,st.dbid
               ,st.objectid
               ,qs.total_worker_time
               ,qs.last_worker_time
               ,qp.query_plan
FROM sys.dm_exec_query_stats qs
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) st
CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) qp
ORDER BY qs.total_worker_time DESC
SP_Whoisactive --- download from : http://www.brentozar.com/responder/log-sp_whoisactive-to-a-table/
Activity Monitor and sp_who2 active also will give some idea...
Reference links...
http://channel9.msdn.com/posts/SQL-server-High-CPU--Part-1
http://channel9.msdn.com/posts/Troubleshooting-SQL-server-High-CPU--Part-2
http://jeffstevenson.karamazovgroup.com/2008/09/identifying-high-cpu-sql-processes.html
http://searchsqlserver.techtarget.com/tutorial/Step-1-CPU-usage
================
Execute this script and and start doing your analysis in your server so that you will get more idea how its working and all the details...
Sample CPU Test : Dont try this in production and try this in your test or Dev server..
-- Query to Keep CPU Busy for 2 0 Seconds
DECLARE    @T DATETIME, @F BIGINT;
SET @T = GETDATE();
WHILE DATEADD(SECOND,20,@T)>GETDATE()
SET    @F=POWER(2,30);
You can easily change the parameter in the DATEADD and can make it run for 50 seconds.
-- Query to Keep CPU Busy for 50 Seconds
DECLARE    @T DATETIME, @F BIGINT;
SET @T = GETDATE();
WHILE DATEADD(SECOND,50,@T)>GETDATE()
SET    @F=POWER(2,30);
Raju Rasagounder MSSQL DBA

HELP: Premiere Pro CC not using all CPU and RAM during rendering and export

Hello,
I am using Premiere Pro CC on a Windows 7. My timeline is quite simple with two videos, one with the movie (mpeg) and the other with the subtitles (avi).
When I render the sequence in PP or export, the rendering time is way too slow and it only uses around 15-20% of the CPU and 3 GB of RAM.
My hardware config is :
- CPU : i7-4770k 3.50Ghz
- RAM : 8 GB
- Disk : 2 x 3 TB SATA (no raid)
RAM is not the bottleneck, neither the disk access.
I have tried rendering and exporting the same project on an iMac (with an i5 2.7 Ghz and 4 GB RAM and only 1 disk) and the result is 4x faster !!!
The CPU usage is close to 100% as well as RAM usage.
So how come PP uses all resources availble on an iMac and not on a Windows 7 ?
Is there any known bug or software bottleneck on Windows 7 ?
My machine is brand new and nothing much installed besides Adobe products.
Any help is very much appreciated.
Thanks,

I just rendered out a a 2 minute sequence with about 100 clips in it and Colorista effects on everything to the Vimeo 1080 H264 preset. It took about 5 minutes to render straight from Premiere, it used all the recourses it could, my CPU was running at near %100, same with my ram and GPU, I was happy.
Then I did another render with Red Giant Denoiser and it now wants to take 30 mins and it is only using about %20 of the recourses available. My problem isn't that its taking longer with Denoiser but that its not using all of my computers CPU and GPU.
Im rendering at maximum render quality and bit dept to H264 (Im happy to wait the extra time), if I try to use VRB 2 it encodes 1 pass at a time and wants to take up to 40 minutes.
I would appreciate some advice on this.
Premiere Pro CC 2013
2.6 GHz Intel Core i7
NVIDIA GeForce GT 750M 2048 MB (CUDA GPU enabled in Premiere)
16 GB 1600 MHz DDR3
OS X 10.9.4 (13E28)

Ovi manual set-up and synchronization

i'm having difficulty synchronizing my phone contacts to ovi. can someone help me please?

Open the Connection Doctor under Window in the Menu bar when Mail is active.
You will see red or green icons to indicate if you are connected. You can click on Show Detail to get more info.
For outgoing issues, it's usually the password that needs to be re-entered.
Edit SMTP
Select Account
Under the Advanced tab enter password

Getting most ffrom my cpu and ram cinfigd in the bios

Dera list,
Hi there I am new to the list and have an k7n2 delta 2 platinum board I have upgraded to. I have 2gb of crucial ram and striped raid set up. This is a board upgrade.
now the bios is well confusing in comparison to the via one I was using on my abit board.
bascially my barton 2500 xp is unlocked and I can ramp it up to a 3200xp. Now I have ddr 400 ram and I want to tweak it as fast as I can while keeping it stable. now all this commander stuff is well confusing.
basicall I want make sure the fsb is running at 400mhz or more, and the chip is at a 3200xp+. and stable, any one any suggestions for a start point so its all set manually rather than these auto functions which seem to exist.
cheers
brummie

You can use CPU-Z to check your settings. I find it best to just use good ole bios overclocking. Set ram 1:1(FSB/Dram ratio) and FSB to 200 that that should give you 2200Mhz.

Mac Pro - CPU and Ram Utilisation (don't appear to be fully used)

Hi,
We've recently purchase and set-up a Mac Pro running OS X 10.4.8 (latest patches), FCP 5.1.2 and don't seem to be getting quite the performance we were expecting. (Caveat - I'm a IT tech not a video specialist so apologies if I get something wrong).
A few background details
Our configuration is as follows:
Mac Pro Dual Proc/Dual Core 3.0GHz intel
5GB Ram configured as:
Riser A Dimm 1 - 1GB
Riser A Dimm 2 - 1GB
Riser B Dimm 1 - 1GB
Riser B Dimm 2 - 1GB
Riser A Dimm 3 - 512MB
Riser A Dimm 4 - 512MB
(think AFAIK this should be the best config for the ram we have?)
(Slot 1 (in x16 mode)) ATI Radeon X1900 512MB graphics
500GB Internal SATA HD
(Slot 3(in x4mode)) FC 2 GB/s Apple card to XRAID (7x500GB RAID 5 with one spare)
(Slot 4(in x4 mode))Blackmagic Decklink HD Pro
Xraid seems fine performance wise - Blackmagic disk test shows 145MB/s Read about 100MB/s write.
Anyhow we have been doing some test rendering but don't seem to get the CPU utilisation above 150% (out off 400%) and also note the RAM utilisation also seems a little on the low side (not using more than 200MB 'Real memory' (as noted in Activity monitor) and any more than 1.2GB 'virtual Memory' despite having lots available (nothing else running)).
The (DV PAL) file we are rendering is simple consisting of over an 1 hour of Sat TV footage (bout 15GB worth just to test) captured via DV to which we applied some plugin effects (Chroma key, Light Ray and Scrub) once again just to test perfomance.
Have checked all the settings I can think of -i.e. system settings > Memory and Cache is set to Application = 100% (2560MB) and Still Cache = 20% (482MB). Scratch is Xraid etc. but can't seem to find anything obvious that could bee affecting this. (Also as an aside does anyone know if FCP limited to 50% of total sys memory as it appears to be (looking at the app = 100% = 2580MB) as it seems we could utilise more (in generall)).
Is this situation be normal? - bit hard to benchmark as our other machines are still 10.3.9 / G5 based with FCP 4.x. The Video tech seems to think its not as big a difference from his Dual 2.0Ghz G5 2GB Ram (3 years old) as he thought it would be (apologies for his vagueness)
Anything I can look to change/improve - I am concerned mainly about the lack of utilisation? Everything is freshly built straight after delivery
thanks - Pete
Mac Pro DP 3.0Ghz Mac OS X (10.4.8)

It probably is mostly a 32-bit versus 64-bit thing in that the big boys like Final Cut Pro, Photoshop, After Effects, etc. won't "see" more than just under 4 gigs of RAM. So they won't use memory as efficiently. A nice side effect to this is that you can multitask well with several of these apps open at once if you have a around 8 gigs of RAM.
Also DV (NTSC or PAL) isn't going to tax the system much as far as bandwidth so your maximum RAM usage probably won't be as high.
Compressor will push the CPUs harder, as will using some other codecs that are more sophisticated than DV.
Also, I'd think that the new Intels are still new enough that a lot of software might not be fully optimized yet. And in general the G5 PPC machines have a really fat memory to processor bus so that you aren't necessarily going to see a radical speed increase with these new Intel motherboards for some tasks.
If you have any CPU-based 3D apps like Cinema 4D or similar I'd try rendering tests to benchmark your CPU usage. 3D isn't as RAM intensive but it will push the four cores in my Quad G5 nicely. I'd expect the new Intel Quads to outrun my PPC Quad.

Upgrade CPU and RAM on Lenovo G480

Hello, I wanted to ask something: can I upgrade my CPU on my lenovo G480? And in case of a positive answer, which CPU's are compatible with it? Also, I bought an 8gb RAM, and installed it on my notebook, and it says that I have 12 GB of ram, but I read somewhere else that I can only have 8 GB of ram on my notebook... this means that what the system says is a lie and thus I still can only use 4gb of ram of the 12 that it shows? Thanks in advance.

Hi Snipercat94,
Welcome to Lenovo Community!
As per the query we understood that you are looking for CPU & memory up-gradation for your Lenovo G480.
Yes, you can up-grade the processor and the list is available in Hardware Maintenance Manual you can check it on page 101.
It is good to know that G480 is detecting 12 GB of RAM, and as per the OS it is showing 4 GB RAM that means you system is having 32bit Operating System, suggest you to install 64bit Operating System.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Finder CPU and RAM high, unresponsive, icon fail to load

Hey guys,
I am trying to figure out a solution here, also, if this is my computer specifically causing this.
I have a mid 2012 MBP, I7 2.9ghz, 750gb HDD, 8gb ram, Mavericks.
I have about 1 million files on my hard drive, and it seems my computer has issues with this. When I open finder and "All my files" loads up, my finder CPU percent shoots up to 200 to even 360%. The ram usage for finder shoots up a few GB's and even closing finder, it keeps that usage. It does not make sense to me the memory usage stays used because if I go from All my files to Documents, then back to All my files, it takes awhile to reload those files. Not sure what is being stored in RAM if it is reloading every time and uses more and more ram.
Anyways, This gives me huge unreponsiveness. One consequence is if I write click a file and choose open with, the icons sometimes do not load. If I click elsewhere and choose open with again, the icons are loaded. If I go to Applications, I can painfully see all the icons slowly load.
I have tried everything I have been able to. All the resets, deleting caches and plist. Reinstalling OSX. Going as far as reformatting. I have to do a fresh format because if I reload my backup files the number of files jumps up. Over time, the number of files I have reach my normal amounts and I get these performance issues. I have been on the phone with apple in total of over 30 hours. I have reinstalled OSX more than 7 times, formatted more than 3 times, been to a genius bar about 7 times.
Apple first thought it was due to programs, but through testing (creating files on a fresh install) showed my performance issues were not related to a third party app. This made them replace my hard drive, but I get the same issues with the new hard drive.
I found a compounded issue with time machine, if I had local backups on it essentially doubled the amount of files I had on my drive and made things worse. I turned local backups off via command line. This helped a lot, but still not fully there.
I can turn spotlight off on some of the bigger folders with files, but when I get down to if I would have to turn spotlight off completely for my whole computer to hit every file. This means I cannot search for things on my computer which is a no no.
Why do I have that many files? Well, that is not THAT many. But it adds up quick. I do some development work on websites, I do coding for apps. This all adds up files quickly. School work, movies, music, documents, saved web sites, applications, frameworks, it all adds up.
Once funny thing is, if I run Parrallels with windows 8, my performance is usually better within windows 8 than it is in OSX.
Any suggestions, recommendations? Turning off spotlight is a partial solution but not a viable one. The engineers at apple recommended turning off backups and spotlight on the folders with lots of files, but this means essentially not using a backup or spotlight at all. I cannot turn backups off of my app work, that would be crazily stupid to do. I also don't want to turn spotlight off of everything as that would make finding files that I forget where they are hard to find.
Last thing, my computer runs decently well. Once it starts and is ready it is pretty much good to go. Once I do something file related though, such as open finder, even once it is closed my performance drops until I shut down the computer. Even if activity monitor shows I am 95% idle, I get the spinning beach ball and slowness.
Any help is appreciated.
Here is my etrecheck
Hardware Information:
          MacBook Pro (13-inch, Mid 2012)
          MacBook Pro - model: MacBookPro9,2
          1 2.9 GHz Intel Core i7 CPU: 2 cores
          8 GB RAM
Video Information:
          Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 1:46:8
Disk Information:
          APPLE HDD HTS541075A9E662 disk0 : (750.16 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 749.3 GB (643.23 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Logitech USB Receiver
          Apple Inc. FaceTime HD Camera (Built-in)
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
          com.globaldelight.driver.BoomDevice          (1.1 - SDK 10.9)
          com.bresink.driver.BRESINKx86Monitoring          (9.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
Launch Agents:
User Launch Agents:
          [not loaded] com.google.keystone.agent.plist 3rd-Party support link
          [not loaded] com.valvesoftware.steamclean.plist 3rd-Party support link
User Login Items:
          Boom
          Flux
          iTunesHelper
Internet Plug-ins:
          SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
          None
Bad Fonts:
          None
Old Applications:
          None
Time Machine:
          Mobile backups: OFF
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 697.84 GB Disk used: 98.78 GB
          Destinations:
                    RomesMacBckUp [Local] (Last used)
                    Total size: 2
                    Total number of backups: 20
                    Oldest backup: 2013-07-08 19:48:47 +0000
                    Last backup: 2014-02-06 04:20:20 +0000
                    Size of backup disk: Adequate
                              Backup size 2 > (Disk used 98.78 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               3%          WindowServer
               1%          EtreCheck
               1%          TemperaturMonitorLite
               0%          Flux
               0%          mds
Top Processes by Memory:
          3.35 GB          Finder
          131 MB          com.apple.IconServicesAgent
          90 MB          mds_stores
          74 MB          WindowServer
          66 MB          com.apple.WebKit.WebContent
Virtual Memory Information:
          1.08 GB          Free RAM
          3.72 GB          Active RAM
          2.44 GB          Inactive RAM
          771 MB          Wired RAM
          1.36 GB          Page-ins
          0 B          Page-outs

Thank you for your reply, but I would like to reiterate I have already reinstalled and even formatted numerous times.
Force quit does not help.

Need advice on laptop CPU and RAM

Hello,
I've just started a Multimedia and Design education, where I will be working with Adobe cc - mostly Photoshop, Illustrator and inDesign. I'm looking for a portable laptop to use while in school, and I have found one with a good IPS display and SSD.
My question is, if I should I go with an dual core i5-4210M (2,6Ghz) or a quad core i7-4712MQ (2,3GHz)? - and If I should go for 8GB of RAM or 16GB?
I have googled for hours now and people seem to have very different opinions on what these programs need in order to run good. I realize that more is better, but I want to know if it's necessary.
At home I have a stationary PC with a 4790K, 16GB RAM, GTX 980, SSD +HHD which I will be using for all my work when at home. So the laptop I'm looking to buy is "just" my placeholder while in school - Not 8 hours a day as a job, but as a learning tool that will be sufficient and get the job done when I'm not at home.
I'm really hoping some of you could shed some light on what I should be going for here.
Thanks.

The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Is it necessary to manually set cpu and ram specs in bios anymore?

Similar Messages

Maybe you are looking for