Is it normal if it takes more than 5 hrs to download and process ios 5 and backup in itunes (syncing)

is it normal if it takes more than 5 hrs to download and process ios 5 and backup in itunes (syncing)

Hi Thaimic,
Thanks for your reply.
IP Adddress: 192.168.0.101
Subnetmask: 255.255.255.0
Router: 192.168.0.7
DNS: 180.168.255.118, 192.168.1.1
These are my WLAN details.under DHCP and BootP. Could you please tell me what to do with the DNS ? I do not have idea about the DNS.

Similar Messages

RMAN archive backup takes more than 1 hour.

Hello,
We execute the following command from HP Data Protector 5.50 in order to backup archives from an Oracle 8.1.7 database running in HP-UX 11.00:
run {
allocate channel 'dev_0' type 'sbt_tape'
parms 'ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=inf,OB2BARLIST=Oracle_Archivers_Inf)';
allocate channel 'dev_1' type 'sbt_tape'
parms 'ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=inf,OB2BARLIST=Oracle_Archivers_Inf)';
allocate channel 'dev_2' type 'sbt_tape'
parms 'ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=inf,OB2BARLIST=Oracle_Archivers_Inf)';
sql 'alter system switch logfile'
sql 'alter system archive log current'
backup
filesperset 1
format 'Oracle_Archivers_Inf<inf_%s:%t:%p>.dbf'
archivelog until time 'SYSDATE-2'
delete input;
backup
filesperset 1
format 'Oracle_Archivers_Inf<inf_%s:%t:%p>.dbf'
archivelog all;
This process takes more than 2 hours for just 3 GB and we don't think this is network issue.
Is our RMAN command doing more thinks than just archives backup?
Almost at the end of backup we get following message:
Default exp binary /INF/oracle/app/product/8.1.7/bin/exp/ is used for catalog export.
Does this message mean an export is done at the end of archive backup?
Note that message belongs it is more than 2 hours later.
Thanks in advance for your help.
Regards,
Carles

Yes, it appears one of your utilities is doing an export backup, check HP Data Protector settings.
-- and/or -- you are having tape problems: ... type[b] 'sbt_tape'

Module ContrentSwitch 3 command takes more than a minute to respond

I have two CAT 6509 switches with a CSM module in slot 3 in SW1 and a CSM module in slot 8 in SW2.
From the router config when I type - module ContentSwitch 3 on MSFC in SW1 - it takes more than a minute to get the CSM config prompt.
Then every command I type - eg, vlan 46 client - takes about a minute to respond.
This happens only on CAT 6509 SW1. On the other CAT 6500 - SW2 - which has the CSM in slot 8 - when I say - at router config prompt - module ContentSwitch 8 - I get an immediate response with the csm config prompt and every command I type I get immediate response.
One CAT 6500 number Sw1, I did a reset 3 at the CatOS prompt and tried again. Same problem, Could it be a H/W problem on this CSM in this CAT6509. The CSM versions of the two CSMs in the two CAT6509 are 4.1(3) and the MSFCs in the two CAT6509 are 12.1(2)E.
It can't be version problem because the two CSMs and the two MSFCs in the two CAT 6509 have the same versions. Tomorrow I will replace the CSM in the problem CAT6509 and try again.
I have configured one CSM and I need to configure this other CSM whick takes more than a minute to respond to commands and so I gave up after I typed 3 or 4 commands.
Any suggestions please?

I meant to type 12.1(22)E2. Please see below for the version and it is the same on the MSFC of both CAt6509 switches.
IOS (tm) MSFC2 Software (C6MSFC2-JK2SV-M), Version 12.1(22)E2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
CSM is 4.1(3) - see below:
HTCUITS1> (enable) show mod
Mod Slot Ports Module-Type Model Sub Status
1 1 2 1000BaseX Supervisor WS-X6K-SUP2-2GE yes standby
15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no standby
2 2 2 1000BaseX Supervisor WS-X6K-SUP2-2GE yes ok
16 2 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok
3 3 4 Content Switching Module WS-X6066-SLB-APC no ok
4 4 8 Intrusion Detection Mod WS-SVC-IDSM-2 yes ok
5 5 8 1000BaseX Ethernet WS-X6408A-GBIC no ok
6 6 48 10/100/1000BaseT Ethernet WS-X6548-GE-TX no ok
7 7 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok
Mod Module-Name Serial-Num
1 SAD051905VW
15 SAD0518057D
2 SAL085286E3
16 SAL09020C29
3 SAD0825082B
4 SAD091208RC
5 SAL06110XWG
6 SAL091389PP
7 SAL05052SZ5
--More--
Mod MAC-Address(es) Hw Fw Sw
1 00-01-64-76-08-3e to 00-01-64-76-08-3f 2.2 7.1(1) 8.3(7)
00-01-64-76-08-3c to 00-01-64-76-08-3d
15 00-06-28-75-f1-00 to 00-06-28-75-f1-3f 1.2 12.1(22)E2 12.1(22)E2
2 00-09-12-58-2d-ce to 00-09-12-58-2d-cf 5.1 7.1(1) 8.3(7)
00-09-12-58-2d-cc to 00-09-12-58-2d-cd
00-d0-04-e0-6c-00 to 00-d0-04-e0-6f-ff
16 00-13-19-34-f6-80 to 00-13-19-34-f6-bf 2.8 12.1(22)E2 12.1(22)E2
3 00-11-5c-eb-5f-ca to 00-11-5c-eb-5f-d1 1.7 4.1(3)
4 00-12-80-f1-31-26 to 00-12-80-f1-31-2d 5.0 7.2(1) 4.1(4)S91
5 00-09-12-60-d4-44 to 00-09-12-60-d4-4b 2.1 5.4(2) 8.3(7)
6 00-13-7f-4d-ae-c0 to 00-13-7f-4d-ae-ef 10.1 7.2(1) 8.3(7)
7 00-03-6c-1c-f1-70 to 00-03-6c-1c-f1-9f 1.5 5.4(2) 8.3(7)

Splitting an event takes more than 3 min

Hi,
I have about 8.000 photos in my library and 2.500 photos in a single event. Now I want to extract a set of pictures from this event and move it in a new event. Is there a faster way doing this than splitting the event before and after the set of pictures? This created 3 events and then I have to move the 3rd event back into the first, the 2nd event is what I want to keep.
BTW, with over 8.000 pictures in the library, is it normal that splitting an event takes more than 3 minutes?

Danielle
Flag the pics you want to move to the new Event and the go Events -> Create Event from Flagged Photos. That will probably be faster.
BTW, with over 8.000 pictures in the library, is it normal that splitting an event takes more than 3 minutes?
I wouldn't have thought so, but it might take a while with an Event that has more that 2,500 pics in it. Remember, Events in the iPhoto Window correspond exactly with the Folders in the Originals Folder in the iPhoto Library package file (Right click on it in the Pictures Folder -> Show Package Contents). So splitting an event literally means creating a folder and moving files to it and so on.
Regards
TD

MacBook pro takes more than 10 minutes to start with ML ?

My Macbook pro takes more than 10 minutes to start. I press Start and it takes more than 10 minutes before I can enter my password. Need your help !

Sounds like time for a PRAM reset. Here's how:
1. Power down the machine.
2. Locate the following keys on your keyboard in preparation for Step 4:
‘command’ – ‘option’ – ‘P’ – ‘R’
3. Press the ‘power on’ button.
4. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
5. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up as normal.

IChatAgent takes more than 100% of CPU

The iChatAgent takes more than 100% of CPU. It works normally for 10-15min with little CPU usage but then takes 100% of CPU and stays like that until I quit/kill the process. I tried waiting for hours to see it might go down is usage, but no, and the cpu fan remains on continuously.
I simply use it for text based chatting, and have disabled audio, video,microphone etc, and still this behavior that I can't use it for more than 15min.
Here is the iChat version: Version 5.0.3 (745)
Macbook Pro/10.6.4/Intel Core i7
I have tried removing ~/Library/preferences/com.apple.iChatAgent.plist as suggested elsewhere, and that hasn't helped either.

Thanks again Ralph.
No, I do not have any add-ons, just out-of-the-box ichat without any audio, video in use.
At this stage unfortunately, I can't continue using iChat as it hogs up the CPU in less than 15min. And that I do not experience any problem with other chat-clients such as AIM or jabber, so switching over to those until there is a resolution.
Suhas
Here is a process-inspection done through ActivityMonitor when it was taking 100%:
Sampling process 517 for 3 seconds with 1 millisecond of run time between samples
Sampling completed, processing symbols...
Analysis of sampling iChatAgent (pid 517) every 1 millisecond
Call graph:
2457 Thread_7542 DispatchQueue_1: com.apple.main-thread (serial)
2457 start
2457 main
2454 -[NSRunLoop(NSRunLoop) run]
2439 -[NSRunLoop(NSRunLoop) runMode:beforeDate:]
2160 CFRunLoopRunSpecific
2087 __CFRunLoopRun
670 machport_insertmember
662 mach_msg
661 machmsgtrap
1 mach_msg
5 machport_insertmember
3 migget_replyport
596 machport_extractmember
589 mach_msg
577 machmsgtrap
12 mach_msg
4 machport_extractmember
3 migget_replyport
389 mach_msg
371 machmsgtrap
18 mach_msg
355 __CFRunLoopDoSources0
237 _MessageAvailable(void*)
110 XprtGetMessage
106 XPRT::InternalGetMessage(void*, unsigned int&, void*&, void*&, bool)
39 XPRT::TMessageQueue::GetMessage(bool)
14 XPRT::TPtrList::RemoveHead()
7 XPRT::TList<void*, XPRT::TDynamicTraits>::FreeNode(XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*)
6 XPRT::TList<void*, XPRT::TDynamicTraits>::FreeNode(XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*)
1 XPRT::TDynamicTraits::VOrphanElement(void*) const
7 XPRT::TPtrList::RemoveHead()
11 pthreadmutexunlock
8 pthreadmutexlock
4 spinlock
2 OSSpinLockUnlock
2 pthreadmutexlock
3 XPRT::TMessageQueue::GetMessage(bool)
3 _spinlock
31 free
20 szone_size
11 free
24 szonefree_definitesize
23 szonefree_definitesize
1 spinlock
5 XPRT::InternalGetMessage(void*, unsigned int&, void*&, void*&, bool)
5 operator delete(void*)
1 XPRT::TCritSec::Unlock()
1 _spinlock
2 XprtTlsGetValue
2 pthread_getspecific
110 XprtGiveMessage
85 COOL::TSocket::SocketMessageProc(unsigned int, void*, void*)
50 XprtPostMessage
48 XPRT::InternalPostMessage(void*, unsigned int, void*, void*)
25 operator new(unsigned long)
21 malloc
18 malloczonemalloc
10 szonemalloc_shouldclear
6 szonemalloc_shouldclear
4 _cpunumber
5 malloczonemalloc
2 _spinlock
1 szone_malloc
3 malloc
4 operator new(unsigned long)
10 XPRT::TMessageQueue::PostMessage(XPRT::SMessage*)
5 XPRT::TPtrList::AddTail(void*)
4 XPRT::TList<void*, XPRT::TDynamicTraits>::NewNode(void*, XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*, XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*)
1 XPRT::TPtrList::AddTail(void*)
4 pthreadmutexlock
1 _spinlock
6 pthreadmutexunlock
5 pthreadmutexunlock
1 spinlock
2 XPRT::InternalPostMessage(void*, unsigned int, void*, void*)
2 _spinlock
1 XPRT::TCritSec::Lock()
1 dyldstub__spinlock
1 dyldstub__spinunlock
2 XprtPostMessage
14 COOL::TSocket::FireDataAvailable()
13 COOL::TProxiedSocket::OnDataAvailable(IInputStream*, IUnknown*)
6 XPTL::CComObject<COOL::TProxiedSocket>::AddRef()
5 XPTL::CComObject<COOL::TProxiedSocket>::Release()
2 COOL::TProxiedSocket::OnDataAvailable(IInputStream*, IUnknown*)
1 COOL::TSocket::FireDataAvailable()
7 non-virtual thunk to COOL::TProxiedSocket::OnDataAvailable(IInputStream*, IUnknown*)
6 COOL::TSocket::SocketMessageProc(unsigned int, void*, void*)
6 XPRT::TPtrFromPtrMap::Lookup(void*, void*&) const
6 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::Lookup(void*, void*&) const
3 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const
2 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const
1 XPRT::TDynamicKeyTraits::VHashKey(void const*) const
3 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::Lookup(void*, void*&) const
2 XPTL::CComObject<COOL::TSocket>::AddRef()
17 XPRT::TMessageMap::Lookup(unsigned int)
7 XPRT::TPtrFromPtrMap::Lookup(void*, void*&) const
5 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::Lookup(void*, void*&) const
4 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const
3 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const
1 XPRT::TDynamicKeyTraits::VHashKey(void const*) const
1 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::Lookup(void*, void*&) const
2 XPRT::TPtrFromPtrMap::Lookup(void*, void*&) const
3 _spinlock
3 pthreadmutexunlock
2 XPRT::TMessageMap::Lookup(unsigned int)
2 pthreadmutexlock
1 OSSpinLockUnlock
1 pthreadmutexlock
8 XprtGiveMessage
6 _MessageAvailable(void*)
4 CFRunLoopSourceSignal
3 CFRunLoopSourceSignal
1 spinlock
4 _IMWillLog
2 _spinlock
1 OSSpinLockUnlock
85 CFSetApplyFunction
84 CFBasicHashApply
40 CFBasicHashGetBucket
28 _CFSetApplyFunction_block_invoke1
20 __CFRunLoopCollectSources0
12 __CFRunLoopCollectSources0
4 CFRetain
3 _CFRetain
1 OSAtomicCompareAndSwap32Barrier
1 _compare_andswap32
8 _CFSetApplyFunction_block_invoke1
16 CFBasicHashApply
1 CFSetApplyFunction
16 __CFRunLoopDoSources0
4 CFRelease
3 _CFRelease
2 CFGetTypeID
2 dyldstubOSAtomicCompareAndSwap32Barrier
2 dyldstub_IMWillLog
1 CFBasicHashGetCount
1 CFSetGetCount
1 OSAtomicCompareAndSwap32Barrier
1 _compare_andswap32
1 OSSpinLockUnlock
29 CFSetContainsValue
25 CFBasicHashGetCountOfKey
25 _CFBasicHashFindBucket1
13 _CFBasicHashFindBucket1
10 __CFStringHash
1 CFHash
1 __CFBasicHashStandardCallback
4 CFSetContainsValue
24 __CFRunLoopRun
9 _spinlock
5 dispatch_get_main_queue_port4CF
3 CFRunLoopGetMain
2 OSSpinLockUnlock
2 dyldstubOSSpinLockLock
1 dyldstub_mach_msgtrap
1 pthread_getspecific
1 pthreadmainnp
36 __CFRunLoopFindMode
31 CFSetGetValue
30 CFBasicHashFindBucket
29 _CFBasicHashFindBucket1
9 __CFStringHash
8 _CFBasicHashFindBucket1
6 CFHash
5 __CFBasicHashStandardCallback
3 CFEqual
2 __CFBasicHashStandardCallback
1 __CFRunLoopModeHash
1 CFBasicHashFindBucket
1 CFSetGetValue
2 __bzero
2 memset
1 __CFRunLoopFindMode
17 __CFRunLoopModeIsEmpty
17 CFSetContainsValue
17 CFBasicHashGetCountOfKey
17 _CFBasicHashFindBucket1
12 __CFStringHash
5 _CFBasicHashFindBucket1
8 CFRunLoopRunSpecific
7 _spinlock
2 spinlock
2 dyldstub_machmsg
1 dyldstubOSSpinLockUnlock
121 _CFRunLoopFinished
80 __CFRunLoopFindMode
66 CFSetGetValue
63 CFBasicHashFindBucket
57 _CFBasicHashFindBucket1
22 __CFBasicHashStandardCallback
16 CFEqual
14 CFEqual
2 __CFRunLoopModeEqual
6 __CFBasicHashStandardCallback
17 _CFBasicHashFindBucket1
9 __CFStringHash
6 CFHash
3 __CFRunLoopModeHash
5 CFBasicHashFindBucket
1 __CFBasicHashStandardCallback
3 CFSetGetValue
6 __bzero
5 __CFRunLoopFindMode
2 memset
1 _CFRuntimeSetInstanceTypeID
29 __CFRunLoopModeIsEmpty
19 CFSetContainsValue
14 CFBasicHashGetCountOfKey
13 _CFBasicHashFindBucket1
7 __CFStringHash
3 _CFBasicHashFindBucket1
2 __CFBasicHashStandardCallback
1 CFHash
1 CFBasicHashGetCountOfKey
5 CFSetContainsValue
6 pthreadmainnp
2 pthread_getspecific
1 CFRunLoopGetMain
1 __CFRunLoopModeIsEmpty
6 _CFRunLoopFinished
2 OSSpinLockUnlock
2 _spinlock
2 dyldstub_pthread_mainnp
39 _CFAutoreleasePoolPop
23 _CFAutoreleasePoolPop
7 pthread_setspecific
3 pthread_getspecific
2 objcgetFreedObjectClass
2 objc_collectingEnabled
2 pthread_self
29 -[NSCFString isEqual:]
11 -[NSCFString isEqual:]
8 CFStringGetCStringPtr
4 object_getClass
3 objcmsgSendvtable2
2 _CFStringGetLength2
1 NSClassFromObject
28 CFAbsoluteTimeGetCurrent
21 gettimeofday
18 __gettimeofday
12 __nanotime
6 __gettimeofday
3 gettimeofday
7 CFAbsoluteTimeGetCurrent
17 _CFAutoreleasePoolPush
8 pthread_setspecific
7 _CFAutoreleasePoolPush
2 objc_collectingEnabled
13 -[NSRunLoop(NSRunLoop) runMode:beforeDate:]
6 NSPopAutoreleasePool
2 NSPopAutoreleasePool
2 _CFExecutableLinkedOnOrAfter
2 objc_collectingEnabled
5 _spinlock
4 objc_msgSend
3 dyldstub_CFStringGetLength2
3 dyldstub_pthreadsetspecific
2 CFRunLoopRunInMode
2 CFRunLoopGetCurrent
2 dyldstubCFStringGetCStringPtr
2 dyldstubOSSpinLockUnlock
1 dyldstub__objcgetFreedObjectClass
1 dyldstubgettimeofday
1 dyldstub_objccollectingEnabled
1 dyldstub_pthreadgetspecific
1 objcmsgSendvtable12
9 objc_msgSend
3 -[NSRunLoop(NSRunLoop) run]
1 +[NSDate distantFuture]
1 CFRunLoopRunInMode
1 NSPushAutoreleasePool
3 dyldstub_objcmsgSend
2457 Thread_7543 DispatchQueue_2: com.apple.libdispatch-manager (serial)
2457 start_wqthread
2457 pthreadwqthread
2457 dispatch_workerthread2
2457 dispatch_queueinvoke
2457 dispatch_mgrinvoke
2457 kevent
2457 Thread_7553
2457 thread_start
2457 pthreadstart
2457 XPRT::_ThreadProc(void*)
2457 XPRT::TTimer::ThreadProc(void*)
2457 XPRT::TCondVar::Wait(int)
2457 pthread_condwait
2457 _semwaitsignal
2457 Thread_7554
2457 thread_start
2457 pthreadstart
2457 XPRT::_ThreadProc(void*)
2457 COOL::TSocket::SocketThreadProc(void*)
2457 select$DARWIN_EXTSN
Total number in stack (recursive counted multiple, when >=5):
11 _spinlock
6 OSSpinLockUnlock
5 __CFBasicHashStandardCallback
5 __CFStringHash
5 _CFBasicHashFindBucket1
5 spinlock
Sort by top of stack, same collapsed (when >= 5):
_semwaitsignal 2457
kevent 2457
select$DARWIN_EXTSN 2457
machmsgtrap 1609
__CFStringHash 47
_CFBasicHashFindBucket1 46
CFBasicHashGetBucket 40
_spinlock 37
mach_msg 31
__CFRunLoopRun 24
_CFAutoreleasePoolPop 23
szonefree_definitesize 23
szone_size 20
pthreadmutexunlock 19
CFEqual 17
CFBasicHashApply 16
__CFRunLoopDoSources0 16
pthread_setspecific 15
CFHash 14
-[NSRunLoop(NSRunLoop) runMode:beforeDate:] 13
objc_msgSend 13
__CFBasicHashStandardCallback 12
__CFRunLoopCollectSources0 12
__nanotime 12
-[NSCFString isEqual:] 11
free 11
CFSetContainsValue 9
OSSpinLockUnlock 9
spinlock 9
CFRunLoopRunSpecific 8
CFStringGetCStringPtr 8
XprtGiveMessage 8
_CFSetApplyFunction_block_invoke1 8
__bzero 8
pthread_getspecific 8
CFAbsoluteTimeGetCurrent 7
XPRT::TPtrList::RemoveHead() 7
_CFAutoreleasePoolPush 7
non-virtual thunk to COOL::TProxiedSocket::OnDataAvailable(IInputStream*, IUnknown*) 7
pthreadmainnp 7
pthreadmutexlock 7
CFBasicHashFindBucket 6
COOL::TSocket::SocketMessageProc(unsigned int, void*, void*) 6
XPRT::TList<void*, XPRT::TDynamicTraits>::FreeNode(XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*) 6
XPTL::CComObject<COOL::TProxiedSocket>::AddRef() 6
_CFRunLoopFinished 6
_MessageAvailable(void*) 6
__CFRunLoopFindMode 6
__gettimeofday 6
migget_replyport 6
objc_collectingEnabled 6
szonemalloc_shouldclear 6
XPRT::InternalGetMessage(void*, unsigned int&, void*&, void*&, bool) 5
XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const 5
XPTL::CComObject<COOL::TProxiedSocket>::Release() 5
dispatch_get_main_queue_port4CF 5
machport_insertmember 5
malloczonemalloc 5
operator delete(void*) 5
Sample analysis of process 517 written to file /dev/stdout

Ipod mini cant take more than 20 songs

About 2 versions of itunes ago my ipod mini stopped being able to take more than 20-30 songs. I do not synch my mini as it can't hold all the songs I have in itunes. But when I try to drag songs it won't take as much as it used to. I've restored 6 or 7 times and it seems to get worst. I can drag one song at a time but around the tenth it copies really slow and by the time I get to the 20th it just hangs on copying and i have to force quit.
I have an old mini from 3 years ago. It's never been dropped or anything like that. Any thoughts?

When iPod Mini is ON Hold down the center and menu button. When you see the apple you will need to hold the center button and the play/pause button! Here are apple's steps! Then restore you iPod Mini
Learn how to manually put iPod into Disk Mode.
When troubleshooting an issue with your iPod, it's sometimes helpful to manually put it into Disk Mode. Read the instructions below for iPods that have a Click Wheel. If you're not sure if your iPod has a Click Wheel, click here. In order to return it to its normal operating state, you will have to reset iPod. The instructions in this article do not apply to iPod shuffle models.
Putting iPods with a Click Wheel into disk mode
Before placing the iPod into disk mode, you should verify that it is charged.
Toggle the Hold switch on and off. (Set it to Hold, then turn it off again.)
Press and hold the Menu and Select buttons for at least 6 seconds until the Apple logo appears.
When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod will change and say "Do not disconnect"
If you are having difficulty putting the iPod model into disk mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center.
If you are still unable to put your iPod with a Click Wheel into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.
If you have an older iPod model without a Click Wheel
Before placing the iPod into disk mode you should verify that it has a charge.
Toggle the Hold switch on and off. (Set it to Hold, then turn it off again.)
Press and hold the Play/Pause and Menu buttons until the Apple/iPod logo appears, then release them. This resets iPod. When you reset iPod all your music and data files are saved, but some customized settings may be lost.
When the Apple logo appears, immediately press and hold the Previous and Next buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod will change and say "Do not disconnect
Now click RESTORE to restore you iPod Mini

When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

mostafa182 wrote:
... how I can solve this problem?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

I used scripting brigde to add a movie that has size bigger than 5GB, exactly after two minutes iTunes return a failed, but the processing of the file is actually added to iTunes Library successfully. The copying take more than 5 minutes to complete. Why?

I used scripting brigde to add a movie that has size bigger than 5GB, exactly after two minutes iTunes return a failed, but the processing of the file is actually added to iTunes Library successfully. The copying take more than 5 minutes to complete. Why the iTunes Scripting Brigde returned failed when it is actually success? It occurred exactly 2 minutes after submit the request to Scripting Brigde. Is this 2 minutes related to the Apple Event time out? if it does, how do I get around this problem? thx

I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account? I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

I am having the problem . it says it shouldnt take more than 3 minutes then i get this message Could not activate iphone. i have taken the sim card out and put it back in even then its of no use. if any one out there can help us it would be very nice

i am having the problem in my 3gs iphone. it says it shouldnt take more than 3 minutes then i get this message Could not activate iphone.
i have taken the sim card out and put it back in even then its of no use.
if any one out there can help us it would be very nice of them. thank you for your time.

I can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
Yes, my friend unlock the phone to use with Rogers but I don't know where

How to make an indicator takes more than one input

Hello,
I want to know how to make an indicator ( like gauge for example) response to more than one case strrcuture result. In other words, how the indicator can take more than one input and move based on different input values ( the arrow of the gauge moves to different angles basesed on the logic structure and not only to one degree).
Thanks in advance,

YES, you got it right Coastal !
This is what i want to do,
I dont know how to establish this output in the software, i am still learning LabVIEW.
I put a merge block to join the outputs but it didnt work.
check it in the attached VI file.
I am sure it is an easy thing but I dont know how to implement it.
Any help you provide is appreciated,
Best wishes

I have been using USB 2.1 10/100M ethernet adaptor. But it takes more than 15 mins to detect network interface. What should I do. I am not using apple's company adaptor. It's local company.

I have been using USB 2.1 10/100M ethernet adaptor. But it takes more than 15 mins to detect network interface. What should I do. I am not using apple's company adaptor. It's local company.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

When I restart my Mac, the grey screen appears like usual. But it takes more than 40 minutes (more) for it to load to finish restarting the Mac. What should I do?!

When I restart my Mac, the grey screen appears like usual. But it takes more than 40 minutes (or more) for it to load to finish restarting the Mac. What should I do to fix it?!

Disconnect all devices from your computer if you have not already done so. Restart again. If the problem has been resolved, you had a peripheral conflict. You will then have to reconnect the devices one at time, restart, to locate the culprit.
Login Items is another culprit. Check your login items.
System Preferences>Accounts>Login Items
Delete/disable all you do not need or want.

Is it true that iPhone 4s does not allow to take more than 1000 photos?

Hi!
Is it true that iPhone 4s does not allow to take more than 1000 photos?
http://dolboeb.livejournal.com/2299939.html

Not true.
Only Photostream is allowed to take a max of 1000 photos, then they will be removed from server/icloud.

Ldap search query takes more than 10 seconds

LDAP query takes more than 10 seconds to execute.
For validating the policy configured, the Acess Manager(Sun Java System Access Manager) contacts the LDAP (Sun Java System Directory Server 6.2) to get the users in a dynamic group. The time out value configured in Access Manager for LDAP searches is 10 seconds.
Issue : The ldap query takes more than 10 seconds to execute at some times .
The query is executing with less than 10 seconds in most of the cases, but it takes more than 10 seconds in some cases. The total number of users available in the ldap is less than 1500.
7 etime =1
6 etime =1
102 etime=4
51 etime=5
26 etime=6
5 etime=7
4 etime=8
From the ldap access logs we can see the following entry,some times the query takes more than 10 seconds,
[28/May/2012:14:21:26 +0200] conn=281 op=41433 msgId=853995 - SRCH base="dc=****,dc=****,dc=com" scope=2 filter="(&(&(***=true)(**=true))(objectClass=vfperson))" attrs=ALL
[28/May/2012:14:21:36 +0200] conn=281 op=41434 msgId=854001 - ABANDON targetop=41433 msgid=853995 nentries=884 etime=10
The query was aborted by the access manger after 10 seconds.
Please post your suggestions to resolve this issue .
1.How we can find out , why the query is taking more than 10 seconds ?
2.Next steps to resolve this issue .

Hi Marco,
Thanks for your suggestions.
Sorry for replying late. I was out of office for few weeks.
1) Have you already tuned the caches? (entry cache, db cache, filesystem cache?)
We are using db cache and we have not done any turning for cache. The application was working fine and there was no much changes in the number of users .
2) Unfortunately we don't have direct access to the environment and we have contacted the responsible team to verify the server health during the issue .
Regarding the IO operations we can see that, load balancer is pinging the ldap sever every 15 seconds to check the status of ldap servers which yields a new connection on every hit. (on average per minute 8 connections - )
3) We using cn=dsameuser to bind the directory server. Other configuration details for ldap
LDAP Connection Pool Minimum Size: 1
LDAP Connection Pool Maximum Size:10
Maximum Results Returned from Search: 1700
Search Timeout: 10
Is the Search Timeout value configured is proper ? ( We have less than 1500 user in the ldap server).
Also is there any impact if the value Maximum Results Returned from Search = set to 1700. ( The Sun document for AM says that the ideal value for this is 1000 and if its higher than this it will impact performance.
The application was running without time out issue for last 2 years and there was no much increase in the number of users in the system. ( at the max 200 users added to the system in last 2 years.)
Thanks,
Jay

Is it normal if it takes more than 5 hrs to download and process ios 5 and backup in itunes (syncing)

Similar Messages

Maybe you are looking for