Is it normal that 2 years old macbook pro logic board died

is it normal that 2 years old macbook pro logic board died.i Went to apple repair plase and they said that logic board is ded.is it really OK that in 2 years it dies.

Hi,
No it is not normal nor it is a gamble. It will be a shame if anyone within Apple thinks that you were gambling on the quality of their products by not buying an extended warranty.
When someone buys a machine like a MacBook Pro from Apple you are not gambling with quality. But investing by forking out a higher amount of money than people do find less expensive solutions. This is, of course, a personal choose.
When a computer dies within two years anyone can see that the machine was not build for such a period and therefore it is not more than reasonable to have it repaired or replaced on the costs of the manufacturer.
In growing amount of (European) countries customers are protected against the approach of limited warranty. Apart from the one year warranty, people are entitled to have a device (in your case a computer) on which they can rely on for many years, unless stated differently (except for wear and tear for which a manufacturer is not responsible for).
Buying an extended warranty (as a warranty against a failure of the product) is no more than a commercial exploitation against which consumers should be protected. Which only can be achieved through proper legislation in the country you live in.

Similar Messages

  • My macbook pro logic board died. I had all my music on an external drive. How do I get my iTunes library, playlists etc. from my dead computer onto my new one?

    My logic board died on my old macbook pro. I have a new one, but I want to get my iTunes library off my old hard drive and put it on my new one. I had set up my old MBP to store all my iTunes music on an external drive, so I have the music. The iTunes program was on the old MBP hard drive.How do I essentially recreate my previous iTunes library, playlists, etc on my new laptop?

    You will need the iTunes Library.itl file which generally lives in ~/Music/iTunes/. You can recover this from the backups you were making before the HDD died. Otherwise, you cannot recreate the library.

  • My 2008 MacBook Pro logic board died and I'm pulling the hard drive out.  What Apple computers have room for a 2nd 2 inch hard drive?

    The logic board on my 2008 MacBook Pro died.  But the hard drive is fine.  What Apple computer has room for me to insert my old drive as a 2nd hard drive?

    You can add it to any unibody MacBook Pro in the optical drive bay, if you can get along without an optical drive and you aren't worried about voiding the warranty (or if the machine you buy isn't under warranty). You can't add it to a Macbook Air, Mac Mini, or iMac, but you can easily put it into a Mac Pro. And of course with any Mac you can put it into an external enclosure and use it as an external drive.
    See my second post in this thread for a couple of enclosure recommendations:
    https://discussions.apple.com/message/17791697#17791697

  • MacBook pro isn't even 2 years old and the logic board died.... Can apple help?

    Will apple replace or exchange this for me? It has never been abused, I treat it with so much care. I didn't even think about getting the extended warranty...I expect my computer to last longer than 2 years. Feel really let down by this.

    Sorry for your problems but, unless there's a known problem with certain problems, Apple will charge you to replace your motherboard. Next time, I strongly suggest buying AppleCare. I've owned Macs since 1985 and when AppleCare became available, I always bought it for any hardware device for which it was offered - and I believe that it is a particularly good investment for laptops.
    You should take it to an Apple Store and see what the price would be for the repair - they are often surprisingly reasonable.
    Clinton

  • I just upgraded to Maverick on my2 year old Macbook Pro and it has slowed down the computer terribly.  All I see is that whirling circle every time I do anything.  How do I go back to old OS.  Terrible upgrade -- forces you to buy a new Mac!!!!

    I just upgrade to Maverick on my 2 year old MacBook Pro and it has slowed down the computer terribly.  All I see every time I do anything is that crazy circle going round and round.  I don't recommend you upgrading.  How do I get rid of it.  I believe it forces you to buy a new macbook!!!!

    It does not. First things first have you tried restarting?
    Try restting PRAM
    http://support.apple.com/kb/HT1379
    Try booting up in Safe Mode
    http://support.apple.com/kb/HT1455
    Also open "activity monitor" and look and see what is using a lot of processing power.

  • Have a 2 year old macbook pro that won't turn on--logic board?

    We have a 2 year old Macbook Pro that will not turn on. A computer repairman said it's probably the logic board. Does Apple warrant that or are we just out $1,700?

    When you attach the power adapter, does the led light up?  If so, what color?
    What happens if you press the external battery check button?
    Have you tried a SMC reset?
    http://support.apple.com/kb/ht3964
    Have you had it evaluated at an Apple store genius bar or an AASP?
    Ciao.

  • I am going to replace my 3 year old MacBook Pro with a new MacBook Pro Retina display machine.  I have been told by Apple that I can use the Migration Assistant ON MY WIRELESS NETWORK (no cables) to transfer data... I've read this can take AGES.. True?

    I am planning to replace my 3+ year old MacBook Pro with a new MacBook Pro, Retina display... I have been told by "chat" on the Apple site that I can transfer my data wirelessly... on my network.. Is is a good option?  I don't want to invest in cables if I can help it... since the old machine has firewire and the new one has thunderbolt!  Will the wireless transfer take forever... as in 30-50 hours???  I've been hearing these horror stories...

    Ralph Landry1 wrote:
    Recently did one MacBook Pro to another for my daughter...almost full 500 GB HD estimate wireless was 48 hours, wired took a little over an hour.
    Wow, shocking in comparison.  You have the patience of a Saint ! 

  • I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected

    I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected, i have tried shutting down and restartinf while holding down the trackpad, as recommended on some forums but that has done nothing
    It might be a huge coincidence but the drive was working fine before i installed lion?

    Installing Lion would not cause the superdrive to stop working.  Are you unsure as to whether or no a cd/dvd is inside?  Something may be broken inside and you should consider bringing it in for service.

  • HI there all, have got a 2 year old macbook pro that just recently wont start up. Even if I know the battery is fully charged. What I have to do is remove the battery, wait a minute or so, insert back in and it will fire up. Any ideas?

    HI there all, have got a 2 year old macbook pro that just recently wont start up. Even if I know the battery is fully charged. What I have to do is remove the battery, wait a minute or so, insert back in and it will fire up. Any ideas?

    Try the old two stand-by's first:
    Reset PRAM, and;
    Reset SMC.
    If that doesn't help, call back,
    Clinton

  • Why is the internet faster on my 3-year-old Macbook Pro than on my iPad???

    Though I love my iPad, I am puzzled why surfing the web is so much slower on the iPad than on my three-year-old MacBook Pro. I have a cable modem and an airport extreme. Loading the same pages on Safari, the MacBook is much faster than the iPad. Is this normal? Could something be slowing down the connection to the iPad?
    Thanks!
    Steven

    Even a 3 year old MacBook has 4 times the CPU power and about ten times the RAM of an iPad.
    You can run speed tests on the iPad and make sure that you don't have a connection problem.

  • Hi, I have a 3 year old Macbook Pro 13" and I accidentally cracked the outer screen of my mac book, however the LCD panel is fine and works well. Please advise what to do

    Hi, I have a 3 year old Macbook Pro 13" and I accidentally cracked the outer screen of my mac book, however the LCD panel is fine and works well. Please advise what to do. I live in India and I have gone to authorised Apple technicians and they infomed me that I will have to replace the LCD panel as well even though it is not cracked, is this really true or can I just change the outer shell? Also they say that they cannot do it in India... can I do it myself at home?

    Since it is 3 years old find a local repair shop that can replace the glass Only. you may have to send it out to a Non Local shop for that but there are some that specialize in doiing that on Mac notebooks.
    Apple will ony replace the complete screen enclosure with all normal parts included, LCD, Camera, Aluminum housing and glass as one unit. Which is very expensive. Or you could just use it as a desktop system with external monitor and buy a new notebook.

  • I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

    I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
    I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
    I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
    After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
    “Welcome to Aperture 3.2
    Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
    Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
    Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
    Current Library Location:
    Jadzia (home)   -----Pictures------Aperture Library
                                                      QUIT             UPGRADE”
    I have heard horror stories  about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
    So here is my dilemma.  I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
    Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

    Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop.  Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
    You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file.  For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto. 
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Note:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    OT

  • My 3 year old Macbook Pro is getting slow..

    Hello, i have a 3 year old Macbook Pro which have been great use to me. When i first purchased it, the boot up time was extremely fast, and the general speed of the mac was superb. However 3 years later the machine take at least 3 mins to boot up and is pretty slow when i use it to carry out my daily tasks.
    It originally came with Tiger but i upgraded to Leopard, basically i'm after advice on how i can increase the speed or how to make my mac as fast as it was 3 years ago. anyway help or information would be greatly appreciated. Many Thanks in advance.

    Use a Utility like MainMenu or OnyX to clean out the caches, archived and temporary files.
    Do a Parameter RAM reset - hold down apple/option/p/r keys at start up and wait for three chimes before releasing the keys.
    Use Disc Inventory X to examine your hard drive and see a) if there's anything there taking a lot of space you can delete and b) that you still have 10%+ free space.
    Consider doing a clean install of the OS and all Applications, it's a lot of work but is the one sure way of "starting over"

  • All of a sudden my 3 year old macbook pro screen is blurred - I can hardly read the words - any ideas?

    All of a sudden the screen on my 3+ year old macbook pro has blurred badly - I can hardly read the words - any ideas?

    You likely didn't erase the ENTIRE drive of the later OS X operating system before installing Snow Leopard. You just targeted the Macintosh HD partition.
    Try again, this time make sure to select the name and size of your boot drive at the top to catch the hidden EFI partition that's responsible for the splash screen at boot time (no screen = white)
    It will take two reboots to reset the EFI again, so once Snow is installed and reboots, reboot again.
    How to erase and install Snow Leopard 10.6
    How to revert your Mac to Snow Leopard
    Restoring firmware on Intel Mac's

  • I am running OS X Yosemite on my four year old MacBook Pro which has become progressively slower and is loaded with applications I no longer use. I plan to start afresh by formatting a new 1TB SSD as a boot disk and reinstalling Lightroom 5 and PhotoShop

    I am running OS X Yosemite on my four year old MacBook Pro which has become progressively slower and is loaded with applications I no longer use. I plan to start afresh by formatting a new 1TB SSD as a boot disk and reinstalling Lightroom 5 and PhotoShop CC.
    Is there a list of the files and/or folders that contain Settings and Preferences which can be copied from the old system to the new?

    with your cc apps you should try to use the sync feature.  that's never worked consistently for me, but when it does work, it's helpful.
    there are preference folders and presets and settings that you could copy but you're better off installing fresh because a common problem for people with adobe program issues is a settings issue.

Maybe you are looking for

  • Preview on an external monitor

    Hi AE community ! I'm facing an issue with AE CC and my new MB Retina. I have an external Cinema Display plug with Thunderbolt, but this one don't appear in the external monitors list in the settings menu. I have only access to Firewire output. Do an

  • Not Breaking the loop but how to continue with the next iteration in a For

    Hi all i have the following piece of code Please let me know, what is the /*some construct*/ which will not break the loop but goes to the next iteration skipping Login b Loop Login A /*some construct*/ Login B End loop; P.S I should do this without

  • Adobe Reader don't always open instruction pdf files

    I have a 27 inch iMac running the latest osx software 10.8.2. and Adobe Reader 10.1.4. Often when I download instruction manuals, such as the one for iDraw, which I purchased from the App Store;  it says the file is corrupt and can't open it. I have

  • Photoshop CS6 laggy operations

    I noticed PH CS6 layer dragging is very laggy, and not smooth at all. For example, in a 2048x872 file dragging layers around in Photoline is smooth. The same document in Photoshop is quite laggy and it is quite distracting. In Photoline the frame upd

  • How to reduild BPEL process in remote Integration server?

    Please advise kindly how to rebuild a remote wdsl... I have many BPEL processes in my remote Integration server and I need to rebuild one of them after some correction was done in its .xsl file. When I right-click on the process name in the Jdevelope