Is it normal that the DataSource field is blank when opening a master data

Is it normal that the DataSource field is blank when opening a master data which is also an InfoSouce in InfoSource page.
Just locate an InfoSource which is also a master data or data target where next to which is a green triangle picture icon in InfoSource page, open it, the top part (Commnication Structure) is automatically expended. Expend the lower part "Transfer_Structure/Transfer_Rules", find the DataSource field is blank. This only occurs for an InfoSource which is also a master data which have more than two data loads (e.g., one is attibute, and the other is text load) or there are two InfoPackage loads for this master data. We checked for master data with only one InfoPackage under it (e.g., only text load) and find it's OK that the datasource field is not blank when expending the lower section.
Thanks

Kevin
It's not common. If you have three Data Sources like attributes, texts and hierarchy by default attribute data source will appear on the screen and for the rest of the things we need to do dropdown and select. This is how in general it appears.
Thanks
Sat

Similar Messages

Field is blank after enhancing 0Customer_attr master data in R3

Hi,
As per requirement to provide "Risk Category" ( filed - CTLPC) in Customer master data.
I enhanced 0Customer_attr Master data and added one filed ZZCTLPC.
I also written a user exit in Include ZXRSAU02 (Function Module - EXIT_SAPLRSAP_002) -
CASE I_DATASOURCE.
WHEN '0CUSTOMER_ATTR'.
break-point.
    DATA: LV_BIW_KNA1_S TYPE BIW_KNA1_S,
          LV_KNKK TYPE KNKK.
    LOOP AT I_T_DATA INTO LV_BIW_KNA1_S.
      SELECT SINGLE * FROM KNKK INTO LV_KNKK
      WHERE KUNNR = LV_BIW_KNA1_S-KUNNR.
      IF SY-SUBRC = 0.
        LV_BIW_KNA1_S-ZZCTLPC = LV_KNKK-CTLPC.
      ENDIF.
      MODIFY I_T_DATA FROM LV_BIW_KNA1_S INDEX SY-TABIX.
    ENDLOOP.
ENDCASE.
I am able to see data in RSA3 for 0Customer_attr - ZZCTPLC filed in Dev system.
When I transported the things to Quality, it shows me blank field.
I have checked that extract structur eis active, Include is active but it shows blank.
Even in debugg mode it does not stop at braek-point given in exit code, while same works fine in Dev system.
Please suggest the solution.

hi, thats why i am also puzzled.
I have done transactional , masterdata source enhancement before.....but never faced such prob..
if it is working correct in dev, it used to work correct in qa..
any way si give u all details..
project - zbiw i sactive.
it has function modules..EXIT_SAPLRSAP_001, EXIT_SAPLRSAP_002, both are active..
inside EXIT_SAPLRSAP_002 , include ZXRSAU02 is also active...
any input from ur side will be a gr8 help..i m lost !!

Before designing cube/ODS in BW how can weknow that the datasource is delta

HI All
Before designing cube/ODS in BW how can we know that the datasource in source R/3 is delta enable or not? I mean what type of datasource is this?
And aslo what do we mean by Standard Extractors? will this mean like for this there wont be any datasource or table? Iam nill in this part? can anyone explain me regarding this
Regards
Balji

Hi Balaji,
To find whether a datasource is delta enabled or not goto R/3 -> se11/se16 -> roosource table -> your datasource -> check the "DELTA" field value. If it is blank then no delta is supported.
All extractors would have a datasource and extract structure associated with it. It does not matter whether it is business content or custom.
Bye
Dinesh

I have an iPhone 4s just eight months, it is normal that the battery lasts only 3 hours? please help me thank you very much.

I have an iPhone 4s just eight months, it is normal that the battery lasts only 3 hours? please help me thank you very much.

Three hours if definitely NOT normal. I get at least 48 hours out my 2 year old iPhone 4S' battery with light usage. Did you do the iOS 7 update on the phone it self (OTA) or through iTunes? In my experience most problems are caused by the OTA updates. For this reason I ALWAYS update using iTunes on my computer.
I would suggest restoring your phone using iTunes on your computer and setting it us as a new phone. This downloads a fresh copy of iOS 7.1 from Apple and installs it on your phone. Just make sure that you transfer all purchased items (apps, music, etc.) as well as photos to your computer before restoring as the restore will completely wipe your phone. Do not restore from a back-up. Yes, you will loose all your data on the phone but restoring a back-up can restore the problem you are currently having back to your phone. Once your phone has been restored you can manually sync back your apps and music.
Before restoring you can also check to see that battery-killers like Location Services, Background App Refresh, etc are only turned on for the apps that really need it. I recently read and article that said that the Facebook app can be a real battery killer. If you have this app installed turn of location services and background app refresh for this app and see if that helps. Also go to Settings / General / Restrictions / Location Services / System Services and turn off all the options in that menu. Your phone does not need any of those to function. Constantly using your phone's GPS is a huge battery killer. I only have Location Services enabled for Find my iPhone and Background App Refresh is turned off completely.
I hope this helps.

After i have finished downloading the app premiere cc it says that the patch field to launch could someone help

after i have finished downloading the app premiere cc it says that the patch field to launch could someone help

What happens when you
Connect the iPod to your computer and restore via iTunes?
iTunes: Restoring iOS software

I have the apple thunderbolt ethernet adapter, is it normal that the adapter itself is quite warm when running?

Is it normal that the adapter unit feel very warm during opertaion?

I second Voenixrising. If I'm moving a lot of data or streaming media it warms up with a few minutes, seems perfectly normal.

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

Each time I try to install itunes I get a windows installer message telling me that the installation package could not be opened. Verify that the package exists and that you can access it???????????

Each time I try to install itunes I get a windows installer message telling me that the installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package.....

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Syncing iCloud with contacts and calendar in MS Outlook 2007, will get message that "the set of folders cannot be opened. The information store could not be opened."

I install the iCloud Control Panel and information is uploaded from my Outlook Contact folder to iCloud. ICloud folders are created and syncing process between my iPhone, iCloud, and Outlook works for a while (day or 2). Then, when I open Outlook after a day of 2, I get the above message that "The set of folders cannot be opened. The information store could not be opened." The only resolve that I have found is to uninstall the iCloud Control Panel, the reboot my Windows computer, then reinstall the iCloud Control Panel and resync contacts and calendar to icloud. This is getting to be very cumbersome to use this feature. What is the cause of the problem that it keeps on disconnecting to iCloud?

I have also fixed it by uninstalling and then reinstalling iCloud, but as you have experienced, the problem recurs without reason. Apple would/could not help as they say that the problem is with Microsoft's Outlook and that I should talk to them. Microsoft's techies won't help without me paying some £200 as I have a Professional - a student's - version of Office 2007. This is scandalous. It is obvious, from the many who have reported the same problem n this forum, that Microsoft should look into this urgently and create a fix

Filling up a pdf form which I received as email. I opened it on my adobe reader 11 and filled up the highlighted fields. Yet when I click on the send via mail it says changes will not be included. How do I send the form with changes?

Filling up a pdf form which I received as email. I opened it on my adobe reader 11 and filled up the highlighted fields. Yet when I click on the send via mail it says changes will not be included. How do I send the form with changes?
The add annotations field shows as not allowed in the security options. So how do I send this form back with the changes??

I think you you need to click 'save' first, then it is saved to acrobat, where it will prompt to send.

HT4623 I am trying to update my ipad from ios 4.3 but when connected to itunes I get an error messagesaying that the internet is not accessible when it is. How do I resolve this?

Hi
I am trying to update my ipad from ios 4.3 but when connected to itunes I get an error message saying that the internet is not accessible when it is. How do I resolve this?

Disable your firewall and antivirus software, restart your iPad, quit iTunes, restart your computer and then try to update again.

I have an A1288 ipod touch I bought about 3 years ago. I am currently trying to download an app however the I'm getting an error message which is essentially saying that the "ios" I'm using isn't up to date and the itunes summary says otherwise?

I have an A1288 ipod touch I bought about 3 years ago. I am currently trying to download an app however the I'm getting an error message which is essentially saying that the "ios" I'm using isn't up to date and the itunes summary says otherwise?
Other forums state I have to buy a new one but what happens when this happens again I think I'm moving to another brand this is crazy?

Yes, there's a limit, and that iPod touch has reached it.
(72099)

When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"?

All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"? My Lightroom release is 5.7.1.
Thanking you in anticipation!

I'd like to get all these '-1 suffix' files together with their associated Develop adjustments into one folder (if they aren't already) so I can see them in Grid view in the Library module, which I use as my basic starting point for everything else at this early stage of my Lightroom 'career'.
To see what folder these are stored in, right-click on a photo and select "Go to Folder in Library".
Advice: if you are going to use Lightroom effectively, you probably want to stop using folders as your method to create a grouping of photos that are already in Lightroom; there are plenty of built-in tools, such as keywords, collections, color labels, etc.
I don't understand why the search on the entire catalog picked up apparently the same two file versions but also got the Develop adjustments when going to the relevant Folder didn't show the adjustment black squares against each image in Grid view nor were they there when the images were opened in the Develop module. Perhaps if I understood this, I'd be a bit more confident of moving forward myself.
These are most likely different versions of the same photo, in different folders. Lightroom stores the edits in its own catalog, and so it knows that one folder's photos have edits, and the other folder's photos do not have edits. Please understand that Lightroom is a database, it knows where the photos are at the time you import them (or add them to the catalog by synchronize), and then if you move things around in your operating system, Lightroom does not know anything about that and problems begin. Thus the advice to organize using Lightroom tools and methods and not operating system tools and methods.

After deleting an email address from Contacts is there any way of preventing it from popping up in the To: field of Mail when one starts to type in a contact name.

After deleting an email address from Contacts is there any way of preventing it from popping up in the To: field of Mail when one starts to type in a contact name?

if you are not on ios 6, then all you can do is wait. if you have deleted the address from your contact list, then it will live on for a while in your 'recently used' addresses. as you use new addresses, those older ones fall down the list, and eventually fall off altogether (unless you use them again). Have patience, it will go away.
Or do the update....

Is it normal that the DataSource field is blank when opening a master data

Similar Messages

Maybe you are looking for