Is it normal that the fan on MBP retina goes on just using MS Word or surfing the net?

My Macbook Pro retina is getting hot. I know this is normal while doing stuff like graphics or gaming. But is it normal just surfing the web or writing stuff in word?
temps:
HD 42 (celcius)
CPU Heatsink 53
Right fan 5321 rpm
Left fan 5653 rpm
Thank you

Surfing and working in Word normally shouldn't make your mbpr hot, unless perhaps you're visiting sites with a lot of videos (e.g. youtube). You can see if you have any background processes loading your system by running Application Monitor and choosing Add Processes. Anything over 10% is a possible culprit. Your temperatures don't really look that hot (some here report temps close to 100 C), but the fan speeds look a little high. Perhaps these readings are after your computer has cooled down a little?

Similar Messages

HT5213 I have two books published to the iBookstore via Blurb. Unfortunately, they just used my first name on the second book. It is like it is by a different author to the first book. -The two books are not linked. Is there anyway I can edit the author's

Hello. I have just joined this community and would be grateful for advice on editing my name submitted to the iBookstore by Blurb on one of my books. I would like to have both of my books with the same author's name. Is it possible? Thank you.

Thank you, Tom. I did contact Blurb support back in March and was told the following:
"We are not able to change the specifications of how Apple Itunes show the author's name on their site.
Apple always have strict specifications of how they set up the Ebook on their site.
This issue can only be solved by contacting Apply and they will not change the name of the site".
I didn't know how or where to contact Apple at that time and gave up. I am resurrecting the issue now as I have seen I have sold some books and would like the people who bought them to learn of my other book.
I am grateful to both Blurb and Apple for making my books possible, but I would like to fix this issue. I will contact Blurb again.
Thanks for your support.

HT5455 Is It normal that my premium category 15" retina MBPs screen has ghosting issues, then I get declined from screen replacement?

Is It normal that my premium category 15" retina MBPs screen has ghosting issues, and I get declined from screen replacement?
I have purchased this hardware in Budapest for approximately 3000 usd. I was a bit shocked to see screen ghosting after a few days of use. The problem was getting worse but because I am a design consultant working mainly on my Mac I couldnt take a week off to leave It at an Apple service station.
Last week I was surprised to receive the information from the local Apple repair shop in Germany that my retina MBP that I bought 13 months ago was declined from screen replacement by Apple.
Considering the price of the product I find It unacceptable that I need to work on a defective product and see shadows every time I leave an Illustrator or InDesign window open for a short period of time.
Is there any way to resolve this issue? I wouldnt like to pay another 800 dollars just to replace a component on my defective Apple product.

Contact Apple Support directly. In Germany the Expresslane or this number
0800 6645 451 will allow you to speak directly to someone from Apple. Explain your situation. Mind you, AppleCare and issues with Apple products like this have to occur without any user accidents or user installed parts to ensure that Apple will cover you. If there was a user accident or installed part, you may be turned down. If you have the original Apple parts, and did the installation yourself, replace it with the original parts very carefully following the directions on http://www.ifixit.com/ unless you can afford an authorized service provider to do it for you. Since we don't speak for Apple here, being end users like yourself, that's why I say "may", as I've seen Apple handle these things on a case by case basis. So hopefully you don't have any obvious damage that looks like it is user caused. Good luck!

The fan turns on more often than it used to. Should I be concerned?

The fan turns on more often than it used to. Should I be concerned?

No, nothing new added to the machine. Would it be possible that the battery is going bad/running hot?

Hacked Message: Your Apple ID was just used to download Podcasts from the App Store on a computer or device that had not previously been associated with that Apple ID

So I just got a message from Apple saying
"Your Apple ID was just used to download Podcasts from the App Store on a computer or device that had not previously been associated with that Apple ID"
I am new to Apple products and signed up to the app store about an hour before but have not downloaded any apps yet.
I also turned on iCloud Drive.
Neither of these are Podcasts and I do not have any Podcasts on my device.
The message is a really poor warning, it could for instance list the IP address which would immediately tell me if it was me.
It could list what type of device it was.
It could list what Podcast was downloaded.
But no, just some random message, probably generated by the really bad default iPhone settings that put ease of use before security.
I have a long complex password that I do not want ot have to change just because Apple generates a stupid message.
On Google you have a log of all logins and devices, is there something similar with Apple, so I can figure this out?

Kroll17 wrote:
I don't know, I thought it was pretty clear
"was just used to download Podcasts from the App Store"
it said it was used to download a Podcast from the App Store
I have not down downloaded any podcasts and there are no podcasts in the podcasts app, of course if Apple were to list the podcast that was downloaded, the IP address and the device it might help one dismiss the message.
I am running the latest v8.1.1 although how the version of my OS related to a message generated by Apple servers is beyond me, unless my device is not authenticating properly so Apple thinks I am someone else but then as I have not downloaded any Podcasts that would not seem to be the issue.
It does NOT say you downloaded a podcast. First, podcasts are not downloaded from the App Store; they are downloaded from the iTunes store.
It's very clear to me; the app named "Podcasts" was downloaded, not a podcast. "Podcasts" is a app provided by Apple for managing and downloading podcasts.

When I click on an Icon on my desktop to take me to a site (such as google) I get a message that it could not find the loaction. Then it goes ahead and opens a Firefox window with the site anyway as if the message never happened.

When I click on an Icon on my desktop to take me to a site (such as Google) I get a message that it could not find the location. Then it goes ahead and opens a Firefox window with the site anyway as if the message never happened. Then when I close the window I see that the message is still there. I have to close it separately. Any suggestions? Oh, and this only happens if Firefox is NOT already active. If I have another Firefox window open when I click on the Icon, it just opens as expected. This message appears no matter which site Icon I select. It did not happen before I upgraded to ver 9.0.

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size

Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size to 7 inches on the long edge. My exported result is 457 dpi and sized at 3200x2134 pixels.. Any ideas on why this is happening and what I can do to correct it?

The DPI setting in a digital image has no meaning at all. You need to learn how to calculate what you need in your exported image. The only measurement in a digital image that has any meaning is the number of pixels in each direction. It doesn't matter what you set that DPI to (actually it's PPI or pixels per inch). The image will have the same number of pixels regardless of the setting. If you need an image that is 5 x 7" (for example) at 200 PPI then you would want an image that measured:
5 x 200 = 1000 pixels
7 x 200 = 1400 pixels
So you would need an image that is 1000 x 1400 pixels to have a 5 x 7" image at 200 PPI. The reason your exported image had such a high PPI setting is because you specified the number of inches you wanted the image to be. And there were enough pixels in the image that it calculated out to be that high PPI setting.
I apologize, I don't explain this very well. But you need to learn to do the math to determine how large you really want your exported images to be.

I buy a second-hand i pad and after i buy it have the seller apple id and it unlock and i contact the seller and he give me the password that can't sign in and i already try using hotmail to reset but the seller forget his hotmail password please help

i buy a second-hand i pad and after i buy it have the seller apple id and it unlock and i contact the seller and he give me the password that can't sign in and i already try using hotmail to reset but the seller forget his hotmail password please help

If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous owner to get permission to use the device. If you cannot contact the previous owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.

I just used a creative cloud , but the thing is that all the apps are trial . Did I buy a trails?

I just used a creative cloud , but the thing is that all the apps are trial . Did I buy a trails?
if that is Tell me how Am I going to get my money back
thanks .

Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I have an MAC OSX 10.6.7 and when I turn it on the fan keeps running. I shut down/turn on and it's the same. Any suggestions? Thanks.

I have an MAC OSX 10.6.7 and when I turn it on the fan keeps running. I shut down/turn on and it's the same. Any suggestions? Thanks.

jean156,
I am a little confused, you are posting in an iMac forum however your profile only indicates you have a MacPro. While I agree a SMC reset may help please carefully read the link The hatter provided because different Mac's have a different processes for resetting the SMC.
In the mean time you may want to update your profile (Your Stuff in upper right and click Profile) and also please post in the correct forum to avoid confusion.

I am confused about something. How do I read a book on my MacBook Pro? I can't find the iBook app anywhere, which is what I use on my iPad. The book I want to read is in my iTunes but I can't click on it. My iBook library does not show up in iTunes.

I am confused about something. How do I read a book on my MacBook Pro? I can't find the iBook app anywhere, which is what I use on my iPad. The book I want to read is in my iTunes but I can't click on it. Some of my iBooks show up in my iTunes but they are "grayed" out. The only books that respond in iTunes are audiobooks and that's not what I'm looking for. Is this a stupid question?

Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro. If I want to read on my mac I have to use Kindle or Nook. Which means any book I've already purchased through iBooks has to be read on my iPad. Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Hi, I have had an LG Octane for 4 years and loved it. I used it for email, surfing the web and facebook. But 6 weeks ago I stopped getting text messages, I could send but not receive. I was told it was just worn out. So I ordered another Octane and it w

Hi, I have had an LG Octane for 4 years and loved it. I used it for email, surfing the web and facebook. But 6 weeks ago I stopped getting text messages, I could send but not receive. I was told it was just worn out. So I ordered another Octane from ebay, and it wouldn't connect to the internet. I was told by Verizon that the software had been changed. So I ordered a NEW in Box Octane and I am having trouble with that too. Bing won't work, nothing will work that will enable me to download Verizon Opera mini that still works on my old phone. I have a smart phone with another number but I LOVE the Octane for daily use. Why will my old Octane work but I can't get a NEW one to. Verizon guys are stumped too:( Please help!! Thanks!

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

After upgrading 3.6.7, in "google image search" all the results appears in one page, I just need to go back to the previous way of search : page after page.......??

After upgrading 3.6.7, in "google image search" all the results appears in one page, I just need to go back to the previous way of search : page after page.......??
where can I adjust this option ?? I tried in IE, the search way is normal as in past..
== This happened ==
Every time Firefox opened

I believe this to be a browser issue, not a google search results issue, and here is why:
having updated Firefox only yesterday, I visited google images searching for pancakes.... interestingly, I have the NEW image results (yuck) on Firefox 3.6.8, I have the OLD image results on IE8 and Opera 10.53.
When I use the 'switch to basic version' in Firefox 3.6.8, indeed it DOES revert to the new format next time I image search (in Firefox).
For those of us who prefer the OLD image results page, I guess we will just have to switch browsers for google image search.
Now I'm off to research how to get rid of the UGLY FFox sidebar.

I just opened my imac, i got the grey screen without apple logo, I just opened my imac, i got the grey screen without apple logo

I just opened my imac, i got the grey screen without apple logo, I just opened my imac, i got the grey screen without apple logo

I am curious as to why you repeated your question twice both in the subject box and in the discussion box?
In answer to your question, have you tried using
Disk Utility?
   1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
   2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
      Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
   3. Click the First Aid tab.
   4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
   5. Select your Mac OS X volume.
   6. Click Repair. Disk Utility checks and repairs the disk.
Then, if you can, reboot to your internal drive and repair permissions.

Is it normal that the fan on MBP retina goes on just using MS Word or surfing the net?

Similar Messages

Maybe you are looking for