Is it normal to get all fuzzy when changing the volume?

almost whenever I change the volume on my ipod it crackles.. pretty inelegant, really. Is this normal, or is my unit defective?

Yeah the seating is definitely fine.. it happens with 2 different pairs of headphones and 2 pairs of external speakers as well.
It's actually been going on for a while.. can't remember when it started...
Is there a way to clean theadphone jack maybe?
Message was edited by: whatisdamon

Similar Messages

Content search is it normal to get an error when using the PublishedDateOWSDATE (blog) property

basic use of Content search employed on a single blog
I use the template called 2 lines. First line is for the title, second line I would like to have either the published date or the categories (of the blog). While the latter is more complicated, I thought the date was fairly simple.
I have placed PublishedDateOWSDATE and when I saved, I got the error message
Object does not support property or method 'indexof' (corerender: {path}item-twolines.js)
What am I doing wrong?

Hi suxxxann,
Let's verify the followings:
Whether you used a custom display templete for the Content Search web part.
Whether you mapped the managed property to the associated crawled property.
I did a test, however, I couldnot reproduce your issue. My steps are:
Create a column in a library, and upload some documents into it.
Do a crawl for my content source, then create a managed property called "Test" and map it to the related crawled property.
Create a page, insert a Content Search web part.
Edit the Content Search Web Part. Expand the Display Templates section, Item: Two lines.
Expand Property Mappings, Line 1: Title, Line 2: Test.
Click OK, and save the page
In my testing, everything worked well. Please try to do as my above steps, compare the result.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Update weight and volume when changing the quantity

Hello ALL,
For some configurable items, those whose weight and volume depends on configuration, when changing the quantity at set level, weights and volumes are not calculated again and order item is saved with wrong data about weights and volume.
when ever changing the quantity we will get a message - " Changing date/quantity may result in different BOM Please configure"
if we do explicitly by clicking "Item Details Configuration' then Weight and Volume will get update automatically.
my requirement is Weight and volume should get update automatically when changing the quantity with clicking on "Item Details Configuration'.
could you provide any OSS notes available for this or any help to achieve this functionality.

Dear Prathap Naidu P,
Did you solve this issue?
Because I have the same problem, and I was looking for hints.
Thank you so much for any help.
Best regards,
J.Flanders

When I left my former employer, Pollinate Agency, I bought a MacBook Pro with Acrobat Pro (version 9 or possibly 9.5) installed from the company. I recently had a serious computer crash, and needed to get all contents erased. The support provider didn't h

When I left my former employer, Pollinate Agency, I bought a MacBook Pro with Acrobat Pro (version 9 or possibly 9.5) installed from the company. I recently had a serious computer crash, and needed to get all contents erased. The support provider didn't have my product key, so could not reinstall Acrobat Pro for me. Since then, I have gotten the product key sent to me from my former employer, [ REMOVED ] So I need help in re-downloading, installing and activating the Acrobat Pro software on this computer.

Please remove the S/N immediately (I can't or would). Never post them online. As for download you can go to http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html on the right panel to get 9 pro. I am not sure there is a MAC version there, but that is the first place to go. If it is the proper version, then please back it up to CD and/or portable HD, not the system HD.

I purchased PDF Converter Plus, v1.0 (4 ). I am unable to convert PDF into text. I get all gibberish when I try to do the conversion.

I purchased PDF Converter Plus, v1.0 (4 ). I am unable to convert PDF into text. I get all gibberish when I try to do the conversion.

I went to the site and did exactly as the 'support' said. I tried three PDF documents for conversion to Word. On clicking 'convert', the last window gives the file with .doc suffix. After I save and open it the window says, "The XML file cannot be opened because there are problems with the contents." Under "Details", it says, "Incorrect document syntax".
Please guide me further.
Thanks

My podcasts download over the size it says ***? and my normal podcasts get cut off somewhere in the middle *** is this ****? someone help before i move to android

my podcasts download over the size it says ***? and my normal podcasts get cut off somewhere in the middle *** is this ****? someone help before i move to android

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

How can i get my car to change the track when i am listening to the music on my phone through the line-in?

how can i get my car to change the track when i am listening to the music on my phone through the line-in? is there a app i can download so it will recognize it? i have a vauxhal astra and the controls are on the steering wheel

First question is how old is Astra and you are in UK ( well you must be to have a Vauxhall)
Normally the Radio only has a line in socket to allow sound
You have two choices here either a simple cable with a 3.5mm Headphone plus at each end
or a cable with the headphone plug to place in car's line in plug and a wide Apple socket to fit the base of your iPhone This allegedly gives better sound but you have to control the iPhone for music selection
The equipment you need to control the iPhone from the Steering Wheel controls ,which I suspect currently handles radio /Cd tracks /stations ,is much more complicated it will have to be integrate with the Factory Fitted radio
and designed to manage the S/Wheel controls and translate to the iPhone .
Fitted into back of radio etc etc
If car is a recent Vauxhall there may be a kit available from them .but will not be cheap
Many imponderables you did not give much away in your OP

Get All instance names in the stage

hi,
is there any way to get all instance name of the objects presents on the stage ? trace them for example
thank you

thank you, it's the correct answer but i still can't solve my problem ,
the thing is that am using a code from http://www.freeactionscript.com that make enemie follow the player, but i need to do some modification, i need to detect collision between enemies so they will not get the one into the other and the thing that i cannot found their instance name, even when i used your function i only get "player_mc : _level0.player_mc" at the output,
here is the code, i will be really greatful if you can find a way to help me solve this problem .
ps :
am trying to write my own code that make enemie follow the player, coz this one looks very complicated
thank you
the code :
* Game Enemy AI Behavior - Run Away & Follow Player
* Version:           1.0
* Author:           Philip Radvan
* URL:                     http://www.freeactionscript.com
var enemiesArray:Array = new Array();
var radians:Number = 180/Math.PI;
createEnemies(5, "typeA", "e1");
createEnemies(5, "typeB", "e2");
createEnemies(5, "typeC", "e3");
// createEnemies(number of enemies, behavior)
// use ex: createEnemies(10, "slow", "myLinkedMovieClip);
function createEnemies(enemyAmount:Number, enemyBehavior:String, enemyLibraryClip:String):Void
          //run a for loop based on the amount of enemies
          for(var i = 0; i < enemyAmount; i++)
                    //set temporary variable that will hold the new enemy attributes
                    var tempEnemy:MovieClip = _root.attachMovie(enemyLibraryClip, "enemy"+_root.getNextHighestDepth(),_root.getNextHighestDepth())
                    //give new enemy a random x/y position based on stage width/height
                    tempEnemy._x = random(Stage.width);
                    tempEnemy._y = random(Stage.height);
                    tempEnemy._rotation = random(360);
                    //set enemy behavior
                    if(enemyBehavior == "typeA")
                              //define enemy characteristics
                              tempEnemy.speed = 1
                              tempEnemy.turnRate = .05
                              tempEnemy.agroRange = 200;
                              tempEnemy.mode = "follow"
                    else if(enemyBehavior == "typeB")
                              //define enemy characteristics
                              tempEnemy.speed = 4
                              tempEnemy.turnRate = .5
                              tempEnemy.agroRange = 200;
                              tempEnemy.mode = "follow"
                    else if(enemyBehavior == "typeC")
                              //define enemy characteristics
                              tempEnemy.speed = 1
                              tempEnemy.turnRate = .2
                              tempEnemy.agroRange = 100;
                              tempEnemy.mode = "run"
                    //define variables that are used to calculate following
                    //*don't change these*
                    tempEnemy.distanceX = 0;
                    tempEnemy.distanceY = 0;
                    tempEnemy.distanceTotal = 0;
                    tempEnemy.moveDistanceX = 0;
                    tempEnemy.moveDistanceY = 0;
                    tempEnemy.moveX = 0;
                    tempEnemy.moveY = 0;
                    tempEnemy.totalmove = 0;
                    //add new enemy to array
                    enemiesArray.push(tempEnemy)
//Update enemies function
function updateEnemies():Void {
          //run a for loop based on the amount of enemies
          for(var i = 0; i < enemiesArray.length; i++)
                    //set temporary variable that will hold the new enemy attributes
                    var tempEnemy:MovieClip = enemiesArray[i];
                    //run follow function with temporary enemy as the follower
                    updatePosition(tempEnemy, player_mc);
// updatePosition(follower, target)
// use ex: updatePosition(myEnemyMovieClip, playerMovieClip)
function updatePosition(follower:MovieClip, target:MovieClip) {
          //calculate distance between follower and target
          follower.distanceX = target._x-follower._x;
          follower.distanceY = target._y-follower._y;
          //get total distance as one number
          follower.distanceTotal = Math.sqrt(follower.distanceX * follower.distanceX + follower.distanceY * follower.distanceY);
          //check if target is within agro range
          if(follower.distanceTotal <= follower.agroRange){
                    //calculate how much to move
                    follower.moveDistanceX = follower.turnRate * follower.distanceX / follower.distanceTotal;
                    follower.moveDistanceY = follower.turnRate * follower.distanceY / follower.distanceTotal;
                    //increase current speed
                    follower.moveX += follower.moveDistanceX;
                    follower.moveY += follower.moveDistanceY;
                    //get total move distance
                    follower.totalmove = Math.sqrt(follower.moveX * follower.moveX + follower.moveY * follower.moveY);
                    //apply easing
                    follower.moveX = follower.speed * follower.moveX / follower.totalmove;
                    follower.moveY = follower.speed * follower.moveY / follower.totalmove;
                    //move & rotate follower
                    if(follower.mode == "follow")
                              follower._x += follower.moveX;
                              follower._y += follower.moveY;
                              follower._rotation = Math.atan2(follower.moveY, follower.moveX) * radians;
                    else if(follower.mode == "run")
                              follower._x -= follower.moveX;
                              follower._y -= follower.moveY;
                              follower._rotation = (Math.atan2(follower.moveY, follower.moveX) * radians)+180;
//onEnterFrame that executes the updatePosition updateEnemies every frame
_root.onEnterFrame = function(){
          updateEnemies();
//start/stop drag for player_mc
player_mc.onPress = function(){
          startDrag(this);
player_mc.onRelease = function(){
          stopDrag();

GETTING A GPF WHEN OPENING THE UNDO SCREEN IN PERFORMANCE ANALYZER(OFSA)

제품 : OFSA_PA
작성날짜 : 2003-04-25
GETTING A GPF WHEN OPENING THE UNDO SCREEN IN PERFORMANCE ANALYZER(OFSA)
========================================================================
PURPOSE
Problem Description
고객이 PA에서 Menu -> "Undo" 화면을 선택하면
무시닫기 에러(GPF)가 발생함.
Workaround
Solution Description
DATA_IDENTITY table에 16000 rows보다 더 많이 들어가 있으면 발생한다.
그러므로, 과거 data 즉, undo가 필요 없는 자료를 삭제를 해야한다.
Reference Documents
note : 134609.1

Hi Titan, this sounds like an IE security setting issue. Things to do:
1. In Internet options>Security>Local Intranet, make sure "Enable Protected Mode" is not selected.
2. Under Sites>Advanced, add https://*.sharepoint.com (and make sure "Require server verification..." is not checked).
3. Under Security>Custom Level, scroll all the way to the bottom and make sure "Automatic logon with current user..." is checked.
cameron rautmann

My phone keeps getting an error when downloading the new ios

Even when i connect to itunes i keep getting an error when downloading the new os. I have made 11 attempts.

download is corrupt. I finally solved it. I had changed my password on my appleid and had not updated it in my phone. After i got the same error on 3 different desktops i decided the error was in my phone and updated all my settings and the update worked the first time.
Thanks for your interest

Why can't I get all my contacts onto the iCloud?

Why can't I get all my contacts onto the iCloud?

What I used to copy my contacts from my 1st gen iPod touch to my new 5th gen iPod touch was a piece of software called Syncios. Just download and install Syncios (www.syncios.com), which is totally 100% FREE. When you connect your iPad to your computer via the included cable it'll give you a Warning about you can't have iTunes running. On the Syncios website it'll give you all of the info on how to back up your contacts. When you connect your 5th gen iPod touch to your computer just click on the Recover button then the file name of the contact back up. Hope this helps you and it helped me a lot. I backed up both my contacts and notes using the same software.

Why do I get bright colors when using the smudge tool?

Why do I get bright colors when using the smudge tool?

Thank you!!!
*Caryl *
(my flickr page ↓)
*https://www.flickr.com/photos/feathersarenice/
<https://www.flickr.com/photos/feathersarenice/>*
We were all born mad. Some remain so.
"Reality is whatever refuses to go away after I stop believing in it."
Philip K. Dick

I had my ipod synced to an old computer that I no longer have how can i get all my stuff on the new itunes without erasing it

I had my ipod synced to an old computer that I no longer have how can i get all my stuff on the new itunes without erasing it

Most Windows users don't.
Purchase an external hard drive and use the backup software that comes with it to backup files from your computer.
Buy TouchCopy and install it on your new computer, connect your old iPod and transfer your songs to your computer.

So in the last few days I've noticed that pressing my volume change keys actually isn't changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squar

So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
Please help!

You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379

HT2513 How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled".

How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"

Jerry,
Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
Hey presto, I've got the @ where it should be. Excellent.
However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
Very strange. I'll look at other keyboards and see where that gets me.
Thanks, Maz

Is it normal to get all fuzzy when changing the volume?

Similar Messages

Maybe you are looking for