Is it normal to see white lines when you press the home screen while it's charging?
Hi, I have a brand new ipad mini and I'm noticing that while I'm charging it and it's in sleep mode, if I press the home screen button whitish/grey lines will appear on the bottom of the screen for a few seconds then fade away. Is normal when charging your ipad mini?
No it is not.
Are you sure that this isn't a phishing attack to get your password?
Allan
Similar Messages
-
Is there a way to keep the screen from lighting up everytime an email comes in, but still be able to see the email on the lock screen when you press the home button? This is killing my battery, but also is kinda the whole point of the notification center in my mind.
This is something I've been wondering. I am a bit like you, I like being able to have a glance at emails or Facebook updates without having to log in, and I think it would be great to be able to turn off the notification switching the screen on, especially for emails as I do get a lot, and Facebook, but I somehow doubt it is possible.
I am currently monitoring how much this eats up my battery charge. On a normal day, after an overnight charge, I would probably still have 30%-40% left when I leave work in the evening. Today, I was down to 48% by lunchtime, where I've usually got a good 60-70% left... Might have to turn email notifications off on lock screen until it's possible to have them appearing in the list without flashing me... -
3 or 4 times since I first fired up my iPhone 4S yesterday, it has displayed the boot screen (apple logo) when I press the Home button to display the lock screen. After 10-20 seconds the phone displays the lock screen, but at that point it has to search for a cell signal (as if the phone just booted up), which takes another 20-30 seconds.
Is anyone else having this issue?
Another thing that has happened only once, but that seems related, is that when I clicked the lock button on the top of the phone, the phone displayed the spinning circle that usually displays when an iPhone or iPad is shutting down.
Any ideas on what MIT be causing this?Disk repair hasn't worked as well.
I just wanted to add a quick observation: after I tried the TM restore for the first time, Safe Boot in verbose mode seems to be stuck at this line "VBoxAdpDrv: version 3.1.0 r55467". This may point to the problem being a Virtual Box problem.
I use Virtual Box extremely rarely - haven't used it in many months. After a re-install, I'm going to remove it and then try the upgrade. If it works, then we've probably found the culprit. If it is real, Apple should maybe add a line saying Virtual Box known to cause problems with this upgrade (or fix it ). -
I updated to iOS 8 on my iPhone 5 yesterday and now when I press the home button even once, it opens the app switcher (which is supposed to only open after pressing the home button twice quickly). Sometimes pressing the home button once even brings up the assistive button (which for me should take three button presses). This did not happen before I updated my software. Has anyone else had this issue? Know how to stop it? Very annoying and at this point feel like I should have waited before I did the update.
Hello ..do you have a history on the phone? did you get it wet? was it dropped? have you been using an authentic ORIGINAL apple charging cable?
this problem occurs when there is a short circuit in the phone... you most likely got it wet at some point and maybe didnt even realize it? The moisture in the phone hasb probablly oxidized one or several capacitors, integrated chips thereby short circuiting the phone. that is why he phone is acting erratic because these short circuits inadvertently "activates" other circuits.. eventually the phone will not turn on anymore- the heat will stress the citcuit board and you will have discontinuity along your main power lines and the phone will cease to function..i see this alllll the time in our shop
the fact you upgraded to ios6 will even work the phone harder because its a more powerful operating system taking full advantage of the A4 chip.. -
sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.
Hey shahbazfromgbr,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
2. Make sure the Ring/Silent switch is not switched to silent.
3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
9. Restart the iPhone.
10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks,
Matt M. -
Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row!
What should I do?Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
How can i delete the new feature "get in contact with your favourite persons"?? When u press the "home" button twice, theres a list on top of the ipad with the last persons youve been in contact with. How do i delete that, or some of them ;-) Sorry for the danish
You can turn that feature off in Settings>Mail, contacts, calendars>Contacts>Show in App Switcher>Recents>Off.
-
i have the iphone 3gs and ive dropped it a few times. when i press the home and lock button, it will not turn on, but when i plug it in, it says in big font IOS 6 and when i slide it open it says connect to itunes or emergency call. it wont turn on when i plug it in to my pc. tips?
roush12345 wrote:
i ... it wont turn on when i plug it in to my pc.
Place the Device into Recovery mode... All data / Content will be Erased.
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766
But... if the Device has been Modified... this will Not necessarily work -
i have an iPhone 4s, when I tried to use control center to skip songs (>> or << signs) or when my phone is locked, i double press the home screen, i also can't skip songs. what's going on? please help me. i know the skip is being pressed because the sign lit up, but the song didn't skip. please help. thank you.
I am having the same problem with my Iphone 4. After update the phone will not control audio from the control center (Friend with Iphone 4S is having same issue). Tried to reset phone and it started working "once". Next time I tried to use the control center it didn't work again. Their needs to be some kind of a fix for this?
-
When I press the home button my iPad won't go to he home page. It is as though the button isn't working properly?
Try this to calibrate your home button:
Open a stock iOS app (e.g., Clock). Once the app is open, press your iPad’s power button until the ‘slide to power off’ screen appears. From that screen, press and hold your Home button until iOS force quits the stock app you have open. You’re done! -
Help, my iphone 5 is locked and will not function! I've turned it off and on and it has the same fault. What ever you press on the screen highlights with a box round it. When you press the round button with the square in the centre the voice on the phone tells you the time. Then the voice says screen lock. If I try and unlock the phone the voice says phone unlock but you can't put the code in. If you hight the box it will say the number but not put the code in?! What's the crack?
Quickly Triple tap the home button to de-activate VoiceOver.
-
how can i delete apps for IOS 7.0.6 when i press the home key the "X" key doesnt appear?
Hi-
This worked!. After updating to 7.0.6 a few days ago I was unable to delete apps. Called Apple support for help without success. I have NEVER entered a passcode to get in to restrictions so I know I didn't make this change (so I'm assuming that 7.0.6 did it for me). Apple wanted me to restore my iphone but thought I'd do more research first. Your advice solved the problem. THANKS! -
I rebooted my Iphone 5S, when I pressed the home button to enter my pass code the resolution must have been reset. The font size is so large I can not enter my pass code. How can I resolve this issue?
Triple click Home.
After you get into the iPhone, Settings > General > Acessibility and set Zoom to Off. -
Clicking noise when you press the volume controls ?
Hello !
Is there a way to turn off the anoying sound effects when you press the volume level keys ?
Thanks &
Take Care
RoyTemporarily: Hold the Shift key while you press the volume controls.
OR
Permanently: Disable "Play feedback when volume is changed" in the Sound Effects tab of the Sound Control Panel. -
My screen is stuck, it doesn't want to go back to the home page when I press the home button
My screen is stuck, it doesn't want to go back to the home page when I press the home button. I have to power it off then turn it back on.
808babe-
One thing to try, is to reset (reboot) the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
If you can not do this reset, you may have a defective Home button. Have an Apple Store Genius look at it, and you might get a new iPad.
Fred
Maybe you are looking for
-
How to search the indexes in 11g Enterprise Manager Console
Hi, After setting the Indexes using Java Embedding for a process, can you please tell me how to search the indexes in 11g Enterprise Manager Console for the particular process.In 10g BPEL Console we have the option of searching the Instances based on
-
[disregard...solved]KDE4.2 not working.
Ok, so I installed kde 4.2 (pacman -S kde, pacman -S kde-extragear) to try it out. I changed my .xinitrc to do "exec startkde" When I do startx it slowly puts a few icons in the center of the screen, and whenever i click, the whole screen dims to bl
-
Photos blurry after restart?
I just bought my iPad and all of the photos are blurry after restart, including the ones I downloaded and took myself. Also when I tap Edit, it returns to home screen. Can anyone help?
-
Captivate 6 crashes at startup
I have installed Captivate 6 (Demo) on my Mac (Retina MBP with MacOS X 10.8.2). Whenever I try to create a new project at startup, the app crashes with the following message (in german, sorry) "Schwerwiegender Fehler. Die Anwendung wird beendet. Adob
-
i tried to install vonage extensions application but i got the answer''your request could not be completed. how can i do this?