Is it OCZ Agility 3 480GB SATA3 compatible with Early 2011 macbook pro?

Hello everyone, i'm insteresting to change my Hard Drive to a Solid State Drive on my MacBook Pro 15inch early 2011. I'm thinking to buy this one (OCZ Agility 3 480GB 2.5" SATA 6Gb/s Solid State Hard Drive - (AGT3-25SAT3-480G)) but I don't know if is it compatible with my macbook version.
Here some details about the SSD
Read Speed: 525MB/Sec,
Write Speed: 500MB/Sec,
Flash: MLC,
Controller: SandForce SF-2281,
Buffer: 0MB
My Macbook details
CPU: 2.2 Intel Core i7
Ram: 8GB
So what do you think? Is tis compatible or not?
Thank you
George

Hi Eleni1,
If you are having intermittent but persistent WiFi issues with your MacBook Pro, you may find the troubleshooting steps outlined in the following article helpful. You may also want to consider upgrading to OS X 10.8.4 or later to take advantage of the more advanced Wireless Diagnostics that were added with that release.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
- Brenden

Similar Messages

How do I uinstall Yosemite? It's not compatible with my older MacBook Pro, and I can't connect to my printer or use safari

How do I uninstall Yosemite? It's not compatible with my older MacBook Pro and I can't connect to my printer or access Safari

How to Downgrade OS X Yosemite Back to OS X Mavericks

What is max internal hard drive transfer rate compatible with a 2007 MacBook Pro?

In attempt to upgrade my mid-2007 MacBook Pro (Intel Core 2 Duo), I bought a Seagate 750GB listed as compatible with my computer on MacSales.com . . .
Seagate Momentus XT ST750LX003 750GB 7200 RPM 32MB Cache 2.5" SATA 6.0Gb/s Solid State Hybrid Drive -Bare Drive
Installation appeared to go well and I ran an extended hardware test with no issues found. However, the drive is listed at 5.46 TB (would be nice) and I get an input/output error when attempting to partition. I can initiate an erase, but after the time I would suspect it would take to erase the drive, I get an input/output error - it seems to appear after the first 750 GB of the '5.5 TB' was erased. At all times, the drive is not recognized when I attempt to install OS X from original discs.
I suspect the 6.0 GB/s transfer capacity of the hard drive is not compatible with the MacBook Pro. The drive came with 4 jumper pins but no jumper and no label diagram to set a slower transfer rate. I called Seagate, Newegg, OWC, and Apple, but no one has compatibility info for my MacBook Pro. To them, it appears I am running the first tests of this new technology with an 'older' MacBook Pro.
My MBP has had no issues - I'd like to keep her going with the optimum internal hard drive capacity, but don't necessarily want to set up a test bench in my house (though my kids would enjoy destroying it) and pay several shipping and restocking fees to test new hard drives.
The original drive had a 1.5 GB/s transfer rate. Does anyone know the maximum transfer rate compatible with a 2007 MacBook Pro? 3.0 GB/s? 1.5 GB/s? Thank you.

No spinning hard drive will transfer data faster then 60-80MB a second. The XT models have a flash storage area that is used when reading and writing data that can make it Appear faster in some situations. That flash memory if only 8 or 16GBs in side, I forget which one.
The drie is rated to work on 6GB SATA bus but it certainly can not transfer data that fast. It should be backword compatible to work on slower buses.
Your drive is 750GBs in size. Not wure where you are getting this 5.5TB (that is 5.5 Tera Bytes which is 5500 Giga Bytes. Your drive is under 1TB)
What are you using to partition the drive? Disk Utilities from the original install DVD?
You need to install on your old drive, Update it from the Apple Website then clone it to the new drive. The version of OSX you are using may not function correctly with that large of a drive. Or get yourself a copy of Snow Leopard, retail disk for $29 from Apple, and do all the partitioning and installing with that version od OSX.

Is the SSD in the 15" MacBook Pro Retina compatible with the 13" MacBook Pro Retina?

A friend upgraded his Retina MacBook Pro 15" from 256GB to an OWC 480GB SSD. He was going to sell me the 256GB SSD he pulled out of his rMBP. I was thinking of buying the base 13" rMBP and installing that 256GB SSD from the 15" rMBP. Will that work or are they not compatible. Eyeballing it, they look to be exactly the same size so physically it would fit but not sure if they are not compatible for other reasons.

none of what you mentioned - use a damp micro fibre cloth to wipe your macbook retina.
make sure it's damp and not wet.
using a wet cloth can cause some drips between the keys that might create an issue - so make sure it's just damp.

Error message Mountain Lion not compatible with computer? MacBook Pro 10.6.8

When I got to purchase Mountain Lion in the App Store it says Mountain Lion is not compatible with this computer. I'm on a MacBook Pro with 10.6.8 installed on it. Help???

http://www.apple.com/osx/specs Your computer doesn't support OS X Mountain Lion

What SSD is fuly compatible with a 2010 macbook pro 13.3'' ( macbook pro 7.1 or mc 374 ) ??

hi i want to buy an ssd and i want to tell me what could i take?
i have seen and like the following ssd :
sandisk extreme
ocz vertex 4
ocz vertex 3 max iops
thanks a lot.

I use OCZ SSD ( octane S2) drive in my macbook pro (mid 2010) model at the same parameters only with upgraded memory 6 GB OZC working with mac laptops and you can read it in there( specifications) >>> http://www.ocztechnology.com/products/solid_state_drives/sata_2_5_solid_state_dr ives
PS: sorry if i have a bad english ,hope everyone understand ((not my first language))
Message was edited by: Mystery of life
Message was edited by: Mystery of life

Ocz agility 3 240gb vs crucial m4 256gb for macbook pro 13 mid 2009?

Sorry about the randomness of the question I am sorta noob in this forum.
But I need help selecting the new ssd drive for my macbook pro. Currently I am using the 500gb seagate momentus xt which is ABSOLUTELY HORRIBLE!! The osx lion crashes once in every 3minutes and generally the system is unstable. However, When I run windows 7 on the machine via bootcamp, everything is copasetic and smooth. I updated my hdd firmware and tried everything under the sun to fix the drive but it was hopeless.
So now I am looking to get a new mid range 250gb ish ssd drive that wont crash on my machine. My mac in only capable of sata 2 so it wont get the max speed in any way. What I really want is to be able to run osx lion without those horrible freezes and crashes. I only use this machine for Word processing, iphoto, itunes and web browsing. But I want to do all of that with superfast speed. The seagate hybrid ssd is faster then normal hdd but it is not even close to being amazing in speed. So which one of those 2 ssds would be better for my macbookpro? If you have any different suggestions that's within that $300-$400 price range, please let me know.
Thank you for reading.

Those are the correct RAM modules for you model (the 13" being the only mid-2010 model that can use 16GB of RAM - but those modules will surely get you to 8GB!).
Am I right in assuming that you want to purchase a SSD to be installed in your boot bay and that you want to install the Samsung drive in the optical bay? Unfortunately, your link points to a rather sparse description of the drive - I see the 2.5" but I don't see the depth (which should be 7-9.5mm and not a mm more).
I'm just unclear about whether you're looking for a new spinning drive as well as a SSD and whether or not the drive will fit (just a minute - OK, found some more info - the Samsung drive is 9.5mm so it should sit just fine in your machine: do you still want a SSD?).
Note that the 2TB Samsung probably won't speed things up much - it's a 5400rpm drive: if you could use a 1TB drive, you could get a faster, 7200rpm drive.
Clinton
MacBook Pro (15” Late 2011), OS X 10.??, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

Is LION 10.7.4 from App Store compatible with mid-2012 Macbook Pro 15"?

I just downloaded lion 10.7.4 from the app store, copied it to a pen drive in the right way (which makes it bootable & tested that and it boots on a 2008 MBP). Connected that pen drive to my 2012 MBP, booted by pressing the alt key, and when i selected the pen drive with the 10.7.4 installation, I get a no entry sign on the screen - basically meaning I cannot install lion.
Note that I have completely formatted my HD, thus losing the lion recovery partition, so thats why I am having to install from the pen drive.

You can install lion on that Mac you just have to start it and be sure to connect to a good internet connection. I suggest you are plugged in to a router directly. Then it should prompt you and when you sign in it will see that you purchased Lion and will verify your mac then it will guide you through the rest of the install. try doing that before you restoe it , you may waste alot of time considering you formatted. Otherwise if it is a mid-2012 it absolutely is compatible and you can call Applecare and they will guide you through it with ease.
The firmware on your mac is what will pull up the promt for connecting to the internet and other such utilities.
Good luck and enjoy !

Are any of these internal hard drives compatible with 13-inch Macbook Pro (Mid - 2012) model?

1. http://www.flipkart.com/wd-scorpio-blue-500-gb-laptop-internal-hard-drive/p/itmd nymt3kzmzqxg?pid=IHDD5KD6KAV9WDSE&otracker=from-search&srno=t_16&query=Internal+ Hard+drive+mac&ref=101f421a-b4c1-42fe-a16d-b8d767bcba76
or
2. http://www.flipkart.com/toshiba-500-gb-desktop-internal-hard-drive-dt01aca050/p/ itmdcvv2csptdmbs?pid=IHDDCVQGQYZGZ6XK&otracker=from-search&srno=t_6&query=intern al+hard+drive+sata&ref=be9ff117-1adc-4026-8326-0f2da6304157
Please check and tell me if the specifications of the above two internal hardrives suit for my Macbook Pro 13 inch Mid - 2012 model..
This is the first time my internal hard drive needs replacement. I'm new to this! So please choose between these two! Thanks for your help :-)

The scond one is a desktop drive. It will not fit, physically.
Check this article, It has links to drives that will work in the MBP.
http://www.macinstruct.com/node/130

Digidesign compatible with my 2006 macbook pro?

wondering if i can run a digidesign 002 in logic pro 9 with a 2006 macbook pro running 10.6.8?? if so, would i need a certain driver since it does not show up when i open audio preferences in logic?? please haaalp!!!

If you're lucky it will work.
http://avid.force.com/pkb/articles/en_US/Download/en362883
And if you're not so lucky............well, then it ain't.
Cheers!

Is the Kingston SSD 240GB Sata3 2.5" SSDNow V 200 compatible with a LATE 2011 Macbook Pro 13?

I need to know if it is 100% compatible and not give me problems in the future.
I hope some help, thanks!!!

Kingston Hyper X is compatible with your Macbook.
Another SSD to look at is the Samsung 830 Series and Sandisk Extreme.
There are a few of us here using the Crucial M4. I have the 256GB and 512GB Crucial M4 drives.
As for the RAM. You can use Crucial, Mushkin, Corsair and Patriot.
I use Crucial on my Late 2011 Macbook Pro 15 Inch and Patriot Signature Series on my Late 2011 13 Inch Pro.
Both are 16GB with no issues. Patriot Signature Series is currently on sale for $100 (16GB)....Not sure which part of the world you live in so can't give you any stores that sells them.
In any event, good luck with your transplant.

Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?

Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?
Operating System: Windows Version 8.1 PRO
When I upgraded from Windows 7 to Windows 8.1, my HP Photosmart Premium all-in-one C309n-s
stop working. Is this printer not compatible with Windows 8.1 PRO? Is there any update for this?

Hey,
HP Photosmart Premium all-in-one C309n/g printer is compatible for Windows 8.1
Please uninstall your printer's old software then install new one for windows 8.1.
HP Photosmart Premium All-in-One C309 Series Full Feature Software and Driver :
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109711-1&cc=us&dlc=en&lc=en...
Kevin_US_CA
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the left side of my post to say thanks!***

Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac.

Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac. I was thinking of getting a Seagate becuase apparently it is compatible with both systems, but I want to know which would be a better investment.

Using USB 3 devices on Mac computers FAQ

HT1338 I cant get my iphone 5 to be compatible with my mac book pro. I've been trying to update my itunes but it wont let me because it tells me i dont have the right software is there anything that I can do so I can sync my phone to computer?

I cant get my iphone 5 to be compatible with my mac book pro. When I plug the iphone 5 in it tells me that i need a newer version of itunes 10.7 and I currently have 10.6. I checked for updates in my itunes and it says i dont have any. So i have gone to the itunes website to try and redownload itunes which i believe it 11.7. When I try and download that version it tells me the software on my computer doesn't suppor that version. I try to update my software and it says there is not software updates available right now. Is there anyway I can get my iphone 5 to synce to my itunes?

In order to get those to work you will have to upgrade to Snow Leopard 10.6.8.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard, preferably the full 10.6.8 combo updater.

Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

It is against TOU to speculate on these message board. Suggest you post your question on the Mac Rumors site.
As I already stated, there is no 10.6.8 update. If there was, it would be listed in Software Update.

Is it OCZ Agility 3 480GB SATA3 compatible with Early 2011 macbook pro?

Similar Messages

Maybe you are looking for