Is it ok to dowload utorrent and keep running macbook pro continuously?

i have downloaded utorrent and i am continously kept on my mbp(retina).is it ok or it may have some issues?

exactly what John Galt states.
leaving running in the background can upload files and/or private photos you don't want shared to the public.
suggestion - don't install it or just open it when you need it and shut it down when you're done.
in the end - it's all up to you.

Similar Messages

  • How do I keep my macbook pro from automatically rearranging my folders and PDF files on my desktop

    How do I keep my macbook pro from automatically rearranging my folders and PDF files on my desktop?  It seems to happen a lot after I've hooked my laptop to my Thunderbolt in my office and then I unhook my laptop to go present at a clients of taking my laptop home to work.  Every once in a while if even places all of my folders and PDF files in the far upper left corner of my screen.  Needless to say, having to constanly rearrange my desktop is extremly annoying and would love to know what the fix is for this problem.  Thank you in advance for any help offered!

    Thanks for the tip "baltwo", unfortunately my desktop settings were already set to NONE.  I've had one of my IT guys here this moring helping me look through all of this and we're at a wall trying to figure out why it's doing this.  This morning when I docked to the Thunderbolt all my folders and PDF files are in the upper lefthand corner stacked on top of each other almost out of view.  If I go to settings, displays, and swith to mirroring, all the folders and files go right back to where they're set up on my MacBook desktop, but I lose the ability to utilize the entire screen of the Thunderbolt.  Very frustrating to say the least and after searching through and reviewing several forums, Apple is very much aware of this issue and seems to be keeping silent on the issue.  Hoepfully they'll launch a fix soon!
    THANKS again for the tip, it's much appreciated!

  • I have a CC subscription and had it loaded on my Mac and my old MacBook pro.  I bought a new macbook pro and turned off CC on my old laptop but when I try to load it on the new one it keeps saying I already have it activated on two devices. Help!

    I have a CC subscription and had it loaded on my Mac and my old MacBook pro. I bought a new macbook pro and turned off CC on my old laptop but when I try to load it on the new one it keeps saying I already have it activated on two devices. Help!

    Contact support by web chat or phone to reset activations.
    Mylenium

  • Running Macbook Pro i7 processor. Adobe CS5 keeps crashing. Uninstalled and reinstalled - no luck. Purchased CS5.5 - same thing. Any clues?

    Running Macbook Pro i7 processor. OSX 10.7.3. Adobe CS5 keeps crashing. Uninstalled and reinstalled - no luck. Purchased CS5.5 - same thing. Any clues?

    cansee123 wrote:
    No - no such software loaded. I should have also said it's only Indesign which keeps crashing.
    I have no problems with InDesign. It may pay to ask Adobe if it is a common problem with Lion of if they have a solution
    http://www.justanswer.com/sip/adobe?r=ppc%7Cga%7C1%7CComputer%7CAdobe+%2D+1&JPKW =adobe%20support&JPDC=S&JPST=&JPAD=9460837683&JPMT=e&JPNW=g&JPAF=txt&JPCD=201201 20&JPRC=1&JPOP=Janine_TechChat_Control&gclid=CJuNq6WUrq4CFUYcpAodfzSKRA

  • Fan start and keep running until start the computer again

    when shutdown the iMac the fan start and keep running until start the computer again

    That's odd. Have you tried resetting the SMC?
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.

  • I have Thunderbird installed on my IMac and on my MacBook Pro, The MacBook Pro Thunderbird is already set up. How can I copy Thunderbird settings to the IMac?

    I have installed Thunderbird on my IMac and on my MacBook Pro. I have already completely set up Thunderbird on my MacBook Pro. How can I transfer all of my settings, bookmarks, etc., from my MacBook Pro to my IMac? Also, can I automatically keep both copies of Thunderbird synched so that changes on one computer are recognized on another computer.

    Create a new profile and copy the old one over it.
    http://kb.mozillazine.org/Moving_your_profile_folder_-_Thunderbird#Create_a_new_profile_and_copy_the_old_one_over_it

  • I have a music library on an iMac and I got a new iPhone and a new MacBook Pro and I want some of the songs from the iMac library to be on my phone and my MacBook Pro and I have a new Apple ID on my phone and my Mac book pro

    I have a music library on an iMac and I got a new iPhone and a new MacBook Pro and I want some of the songs from the iMac library to be on my phone and my MacBook Pro and I have a new Apple ID on my phone and my Mac book pro, is this possible if so how do I do it?

    Providing specifics on all the ways to do this will take more time than I am willing to spend here these days.  You can do some of this with Home Sharing.  You can transfer the entire library from one computer to another, If you do that you can delete what you don't want from the transferred library.
    Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to select a library, then guide it to the 'iTunes Library.itl' file in the moved iTunes folder. If you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
    You do not want to use a new AppleID.  Change the  AppleID on the new phone to the old ID.  Purchases made with one AppleID cannot be transferred to a different one and it will be a royal pain to manage two Apple IDs.
    Change iTunes Store account on an iOS device - Log out of your current account with Settings.app > Store (Settings > iTunes & App Stores on iOS 6) > tap on your AppleID. Log in with a different account. Note, turning on automatic downloads or re-download past purchases may tie the device to that account for 90 days - http://support.apple.com/kb/HT4627 https://discussions.apple.com/message/18484935 - "In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account") When you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again."

  • I upgrated for the latest version of itunes and now my Macbook Pro its 1000000 time slower

    I downloded some update for the Itunes, and now my Macbook Pro its toooooo slow, I dont know what do to anymore. I even reinstalled the whole system. Can anybody help me???

    Do the following. There's nothing of interest in the Activity Monitor data.
    Things You Can Do To Resolve Slow Downs
    If your computer seems to be running slower here are some things you can do:
    Start with a visit to: OS X Maintenance - MacAttorney.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Repair the Hard Drive - Lion
    Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    Suggestions for OS X Maintenance
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such asMacaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
    I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Data Backup
      3. Deja Vu
      4. SuperDuper!
      5. SyncTwoFolders
      6. Synk Pro
      7. Synk Standard
      8. Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.
    If none of the above help, and they may not, then this should:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • How long is to long to keep your macbook pro on?

    I'm downloading a movie and it's gonna take a while and I am wondering what the maximum time is for keeping your macbook pro on for.

    As long as you need it on.  I never shut mine down, I keep it active all day, and I just put it to sleep everynight.  That allows Apple to make updates to your mac.

  • Does keeping a macbook pro plugged in even when fully charged damage the battery in any way?

    Does keeping a macbook pro plugged in even when fully charged damage the battery?

    no it will not, your battery stops charging when it reaches 100%.  you can verify this if you'd like to through system report - power.
    once in a while however, it's best to use it under it's own power and charge it back up once it's down to 75% to keep the battery in optimal condition.

  • How is the best way of keeping your macbook pro battery healthy

    what is the best way of keeping your macbook pro battery healthy there are so many ways what is the best way?

    Read these two Apppe articles:
    http://http://www.apple.com/batteries/notebooks.html
    http://support.apple.com/kb/HT1446
    I generally keep my MBP connected to AC as much as possible and try to make certain that at least monthly I run it on the battery to about the 40% charge level.
    Ciao.

  • My MacBook pro continues to be very slow after downloading Yosemite. It keeps referring to MacBook Pro (2). It's like there are two version running side by side. Any ideas?

    My MacBook pro continues to be very slow after downloading Yosemite. It keeps referring to MacBook Pro (2). It's like there are two version running side by side. Any ideas?
    It is now running Yosemite 10.10.1. I seem to have plenty of memory but the machine still runs slower than before installing Yosemite. Excel has a very noticeable lag when opening and loading files.

    Hi,
    Thanks for the reply. I ran through the various steps as suggested including resetting the SMC.
    I would say that there was about a 10% improvement. Although one of the icons still bounced for the count of 40
    I'm still wondering why from the About this Mac, then System Report. it refers to my name MacBook Pro (2).
    All the various problems seem to have started with the upgrade to Yosemite.

  • HT3235 I just bought a Micro-DVI to video adapter to try and hook my MacBook Pro 13" I bought mid 2009 to my old TV, the adapter doesn't seem to fit any of the connections, is this the right adapter?

    I just bought a Micro-DVI to video adapter to try and hook my MacBook Pro 13" that I bought in mid 2009 to my old TV (svideo), the adapter doesn't seem to fit any of the connections on my macBook pro, is right adapter?

    Shootist007 wrote:
    Apple doesn't offer a MDP to AV or componet connect . Only DVI and VGA. They also don't offer one to HDMI. You have to go aftermarket to get one to HDMI.
    Quite right, but as the OP does not have component or composite connections not important.
    To the OP, this does work, but is not the cheapest, and as it appears that Apple no longer sell an SVideo adaptor cable 3rd party it will have to be.

  • How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

    How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

    I learned that the Dock is positioned at the chosen edge of whatever Display is positioned farthest to that side.  E.g. for the Dock to be positioned on the right side of the Cinema Display (instead of the right side of the MacBook), the Cinema Display must be oriented (by dragging) to the right of the MacBook monitor on the "Arrangement" tab of the Displays Preference Panel.

  • I was messing around with .kext files in the MacintoshHD and now my MacBook Pro won't start up.

    I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!

    Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!

Maybe you are looking for

  • Lync 2013 updating databases after updating Front End servers

    We have a front-end server pool consisting of 3 Lync 2013 servers and a back end of 2 SQL servers using SQL mirroring.  All servers are Windows 2008 R2. Following the instructions in http://support2.microsoft.com/kb/2809243 , I verified that the serv

  • Failed Update - Stuck in Recovery Mode

    An unmodified iPhone. Tried to update to v2.0 and get a failed message; iPhone could not be restored. I get one of 4 error messages 2001, 2003 2005 and (6). I'm using the latest version of iTunes and have rebooted my Mac several times. Plugged and un

  • How do I re-direct all my songs' location?

    Hi guys, Originally I placed all my songs at my F drive, F:\music. But my laptop encounters some problem few days ago, so I just recovered my C drive. After recovery, the system automatically changed the hard drive names that my F: drive becomes D: d

  • Where do I go to get a download of adobe acrobat XI standard for a reinstall?

    Is there a link to download adobe acrobat XI standard?  I can't find it anywhere - just need to reinstall, already have a license/serial number.

  • Disabling Information Broadcasting

    Hi Experts, I want to disable INFORMATION BROADCASTING tab (for selected USER's) in BEx reports when hosted in portal. Could you please let me know, how to achieve this. Thanks in Advance