Is it ok to install Exchange 2013 on Windows Server 2012 Standard?
Hello everyone,
I'd like to know if it is ok/safe to install Exchange Server 2013 on Windows Server 2012 Standard?
As I started doing some research and noticed a page where Microsoft states they don't recommend running Exchange on Server 2012 Standard, and recommend making 2 different servers one for Active Directory and another for Exchange.
On that page they also listed some features that wouldn't work in case of Exchange is running on Server 2012. And that it may put a larger data load if setup this way.
I am hoping someone knowledgeable can explain and tell me if it is safe to use such setup or if it is better to use something like SBS 2011 Standard instead, which has Exchange included?
Has anyone installed Exchange 2013 on Server 2012 Standard successfully and used it for more then several months without problems?
Also just to give an idea on my background, I've been in IT field fairly long but haven't really updated to newer versions much and mainly used SBS 2003 and 2008 only with a few clients so haven't used 2008 too much.
Thanks in advance.
Few things to note.
There is
NO SBS in 2012
All you need is a Std edition of Windows for Exchange 2013, as there is no difference in features between Std and Datacenter as far as Exchange is concerned.
For 10 users, you can have one box with both AD and Exchange. It is not MS recommeded, but it IS supported.
Rajith Enchiparambil |
http://www.howexchangeworks.com |
Similar Messages
-
Installing Exchange 2013 on Windows Server 2012 R2
Now that SP1 has been released, it is supported to run Exchange 2013 on Windows Server 2012 R2
But since it is not yet possible to download Exchange 2013 with integrated SP1 (slipstreamed), is the following installation procedure supported:
- Install Exchange 2013 (without SP1) on Windows Server 2012 R2
- Install SP1 on top of Exchange 2013
If this is not supported, can someone tell me when the Exchange 2013 with integrated SP1 (slipstreamed) download will be released?yes the SP1 is the full product. if you need step by step instruction to migrate to this new version you can get info here : http://buenoflex.com/install-exchange-2013-sp1/
Arnaud Buonaccorsi - GSX Groupware Solutions
http://www.buenoflex.com
http://www.gsx.com <= The monitoring solution for Exchange and Sharepoint -
Sharepoint 2013 comes with prerequisitesinstaller.exe to install the software required for the actual Sharepoint installation.
I 've installed Windows server 2012 in the R2 edition as well as Standard edition, but installing the prerequisites ends with an issue for the Microsoft Identity Extensions (MIE) on both versions (screenshot).
The 2012 R2 server has been updated with all latest files by executing Windows update.
In case of the Server 2012 R2, MIE is already installed , but somehow the Sharepoint installation is missing something.
I al;so tried removing default install to let prerequisiteinstaller.exe to install it's own version, but that did not help.
When I skip the prerequisites remaining items, the Sharepoint installation stops directly , requesting the missing items.
I've tried several Sharepoint server installation files, including the 180 days free version.
Screenshots will be uploaded after my account has been checked......Hi Jay,
Installing SharePoint Server 2013 on a computer that is running Windows Server 2012 R2 could lead to unexpected behavior, therefore, Microsoft does not support SharePoint Server 2013 in Windows Server 2012 R2.
SharePoint Server 2013 with Service Pack 1 and SharePoint Foundation 2013 with Service Pack 1 will offer support for Windows Server 2012 R2.
Refer to:
SharePoint 2013 Support for Windows Server 2012 R2
In addition, as Dave suggested, for the sharepoint server issue, please post in the dedicated forum for a better response.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
How to install device cals on Windows Server 2012 standard edition
Hello i have a windows server 2012 standard edition licence that i have taken on rent from an ISP.
i have created a domain controller on that.
By default only two users can use remote desktop to the server simultaneously.
My Requirement is 20 users can use remote desktop to the server at the same time.For that i have purchased 20 Delive CALs licences like volume licencing.
i have the licence number noted on the paper.
do i need to install remote desktop services first etc ?
Could anyone guide me step by step how can i install or configure so that 20 users can use remote desktop on the same time.Hi,
Any update about the issue?
I would agree with others, you need to install Remote Desktop Services Client Access Licenses.
There are three methods by which you can install Remote Desktop Services client access licenses (RDS CALs) onto your license server:
• Install Remote Desktop Services Client Access Licenses Automatically
• Install Remote Desktop Services Client Access Licenses by Using a Web Browser
• Install Remote Desktop Services Client Access Licenses by Using the Telephone
https://technet.microsoft.com/en-us/library/cc725890.aspx?f=255&MSPPError=-2147217396
Then you can install both Per User and Per Device CALs onto the same license server.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Installation Error Installing Exchange 2013 CU3 on Server 2012
Hello,
When Installing Exchange 2013 on server 2012 I get the following error during Step 1 of 8 of Transport Service. I have installed and unistalled Exchange a few times, restarted the machine manually and removed exchange from AD, etc. to no avail.
Any suggestions will be very much appreciated.
Thank You.
VK
Error:
The following error was generated when "$error.Clear();
install-MsiPackage `
-PackagePath ($RoleInstallPath + "TransportRoles\agents\Hygiene\ASDat.MSI") `
-LogFile ($RoleSetupLoggingPath + "\InstallASDat.msilog") `
-PropertyValues ("ALLUSERS=1") `
-UpdatesDir $RoleUpdatesDir
" was run: "Installing product C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\ASDat.MSI failed. This action is only valid for products that are currently installed. Error
code is 1605.".Martina,
Thank you for your response. KB says that Machinepolicy and Userpolicy are to be set to Undefined and that is what I have.
Windows PowerShell
Copyright (C) 2013 Microsoft Corporation. All rights reserved.
PS C:\Users\Administrator> get-executionpolicy –list
Scope
ExecutionPolicy
MachinePolicy
Undefined
UserPolicy
Undefined
Process
Undefined
CurrentUser
Undefined
LocalMachine
RemoteSigned
VK -
No Option To Install SNMP Service on Windows Server 2012 Standard
Hi,
was wondering if someone could help me with the below issue.
i am trying to install the SNMP service on our new 2012 server however the role doesn't even exist?
could someone advice on how we can install this role? i have looked everywhere but am unable to find an answer
thanking all in advancethe snmp role is being depreciated and replaced by CIM.
but you should still be able to add it.
its a feature - from server manager select install roles and features, click through the roles till you get to the features page and select snmp from the list
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn: -
How to install SharePoint server 2013 in windows server 2012 R2
Hi,
I have SharePoint server 2013, and I want to install it on windows server 2012 R2 version.
Can you guide me on how to install it?,
or you if you got the download link of the full product of the latest release of SharePoint 2013 with sp1, please give me.
thanks in advance.Hi,
Now I could install SP 2013 following this article
http://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/
I realized installing prerequisites software manually wont let Sharepoint 2013 to be installed in Windows 2012 r2 because of some issues, but with the use of power shell I could.
Thanks everyone. -
Not able to inistall Sharepoint 2013 on windows server 2012 r2
Hi ,
I am trying to install Sharepoint enterprise 2013 on windows 2012 r2. In very early stage i got issue when i ran prerequisite installer.
As we all know in this case we need to install prerequisite manually. I downloaded all the prerequisite and installed them manually. I have enabled all web and application role. then followed below link and installed all the prerequisite
http://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/
SQL Server 2008 R2 SP1 Native
Client
Microsoft
WCF Data Services 5.0
Microsoft Information Protection
and Control Client (MSIPC)
Microsoft Sync Framework Runtime
v1.0 SP1 (x64)
Windows
Identity Extensions
Windows
Identity Foundation (KB974405)
Windows
Server AppFabric
CU
1 for AppFabric 1.1 (KB2671763)
All got installed correctly on server validated from control panel then i restarted the server and Ran SharePoint Set up
But still facing issue attached in form of image
Please help me on this.
kirteshHi kirtesh,
According to your description, my understanding is that you got an error when you ran prerequisite installer.
Please make sure the Windows Server Features and Role services are enabled in your SharePoint server.
Start > All Programs > Administrative Tools > Server Manager->Add Roles and Features:
i. Application Server
ii. File Services
iii. Web Server (IIS)
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
Not able to install Exchange Server 2013 on Windows Server 2012
I got an error while installing exchange server 2013 on windows server 2012 : "The registry key "SOFTWARE\Microsoft\Exchange Server\v15\Pickup" does not exist under "HKEY_LOCAL_MACHINE " any related solutions highly appreciated
thanks :Hello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support -
Dears,
I have IBM Flex server with built in storage,
HOW to to make Cluster between two server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers?
If there any prerequisites of the Share storage types ?and any configuration guide to deploy Cluster between two Server 2012 datacenter ?Microsoft Failover Clusters require shared storage. If you wish to create a failover cluster with local storage, you need to use third party software to mirror the disks and present it to the hosts (siog.com, datacore.com, starwind.com). If you
use third party software, you will need to follow their instructions for configuring the environment.
Questions on how to configure Exchange environments are better asked in an Exchange forum.
.:|:.:|:. tim -
Hi All,
I Just installed Exchange Server 2013 in Windows Server 2012 and trying to connect Dynamics CRM 2013 (DNS).
The Installations Success full but unable to load the EAC page by using the following URL
https://servername:port/owa/auth/logon.aspx
I have cross checked in Exchange/owa/auth folder don't have the "logon.aspx" file
But the auth folder have the "logoff.aspx"
I installed many time freshly in separate WS-2012 but it not contains that logon.aspx
I want access the Exchange Administrator Center
Please Help me to solve it
IIS Exchange (Missing of logon.aspx)
SRKD0808Hi All,
I sorted out this problem
Actually we have to run these 2 commands in Domain Control, But what i did I just run this
1) setup /PrepareSchema /IAcceptExchangeServerLicenseTerms
Command in Domain Control we don't need to run the 2nd command, Because I already try to installed exchange 2013 very first time it success and after some modifications
it gone.
That time it will ask you to provide Organization name, Once you give that it will create the Organization name in Domain control and it will save the settings when
you install first time
Because of this reason It is failing to run these 2 command
Finally what i did I just revert back my Domain control snapshot & Exchange server as well
Then i started freshly Installation in DC and Exchange server 2013 successfully installed
URL http://servername/ecp/default.aspx
Whole Process will be here
Exchange Server 2013 Step by Step Installation In Windows Server 2012
SRKD0808 -
Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2
HI,
I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
Setup is unable to proceed due to the following error(s):
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Regards
Anil KumarYou really need to do what error is suggesting.
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Nosh Mernacaj, Identity Management Specialist -
Set up Search Service App For SharePoint server 2013 on Windows server 2012 R2 not working
Hi all,
I installed SharePoint server 2013 on Windows server 2012 R2 using VirtualBox. I created a DC(domain controller) server with a domain set up on one VM and it has SQL server 2012 SP1 installed. Then SharePoint 2013 on another VM was set up to access
the DC server. Everything seems working except Search Service App which cannot be sucessfully set up. Creation process for Search service app says Successful and 4 search databases were created and look fine. But when I navigate to search service app
admin page, it gives error info:
System status: The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '386f2cd6-47ca-4b3a-aeb5-d9116772ef16' in search application 'Search Service Application 1' is in
a good state and try again.
Search Application Topology: Unable to retrieve topology component health states. This may be because the admin component is not up and running.
From event viewer, I see following errors:
(1) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean
isAdministrationServiceJob)
(2) Error From source: SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application '386f2cd6-47ca-4b3a-aeb5-d9116772ef16'
(3) Warning from source: SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message:
Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2 at
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(4) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
Technical Support Details:
System.Runtime.InteropServices.COMException (0xC0041235): The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have
been upgraded.
Since separate DC server and SharePoint server do not work, I installed SharePoint 2013 on DC server ( so DC server has everything on it now ) but it gives exactly same result. Later I installed SharePoint 2013 SP1 and still have the same problem with Search
Service app. I spent two weeks tried all suggestions available from Web and Google but SharePoint Search Service simply does not work. Config and other databases work but why Search Service has this issue seemingly related to search DB.
Could anybody please help out? You deserve a top SharePoint consultant award if you could find a solution. I am so frustrated and so tired by this issue. This seems also to be a SP set up issue.
Thanks a lot.Using new Search Service App wizard to create SSA is always a success. I could delete existing SSA and recreate it and no problem. It says successful but when I open Search Admin page from CA, it gives me errors as mentioned.
Now I used the following PS script for creating SSA from Max Mercher, but it stays at the last setps in following script:
Add-PsSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
$IndexLocation = "C:\Search" #Location must be empty, will be deleted during the process!
$SearchAppPoolName = "SSAPool"
$SearchAppPoolAccountName = "mydomain\admin"
$SearchServiceName = "SSA"
$SearchServiceProxyName = "SSA Proxy"
$DatabaseServer = "W12R2DC1"
$DatabaseName = "SSA"
$spAppPool = Get-SPServiceApplicationPool -Identity $SearchAppPoolName -ErrorAction SilentlyContinue
if (!$spAppPool)
$spAppPool = New-SPServiceApplicationPool -Name $SearchAppPoolName -Account $SearchAppPoolAccountName -Verbose
$ServiceApplication = Get-SPEnterpriseSearchServiceApplication -Identity $SearchServiceName -ErrorAction SilentlyContinue
if (!$ServiceApplication)
# process stays at the following step forever, already one hour now.
$ServiceApplication = New-SPEnterpriseSearchServiceApplication -Name $SearchServiceName -ApplicationPool $spAppPool.Name -DatabaseServer $DatabaseServer -DatabaseName $DatabaseName
Account mydomain\admin is an farm managed account, domain admin account, in WG_ADMIN role, It is in all SQL server roles and is DBO. I see search DBs are already on SQL server. From Event viewer, I got following errors in sequence:
(1) Crawler:Content Plugin under source Crawler:Content Plugin
Content Plugin can not be initialized - list of CSS addresses is not set.
(2) Warning for SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message: Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(3) Error for SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application 'cbc5a055-996b-44a7-9cbc-404322f9cfdf'
(4) Error for SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
(5) Error Shared Services for SharePoint Server Search
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob
Above errors keep being generated. Last step for SSA creation stay there forever. Any clue what is really going on? Thanks. -
Project Server 2013 on Windows Server 2012 R2
Can we install Project Server 2013 on Windows Server 2012 R2? Is it supported? I searched a bit but couldn't find any concrete information if it is supported or not.
From the article:
http://blogs.technet.com/b/office_sustained_engineering/archive/2014/03/03/announcing-availability-of-slipstreamed-office-2013-and-sharepoint-server-2013-with-sp1.aspx
Today, aligned with the SharePoint Conference, we’re announcing availability
of a slipstreamed SharePoint Server 2013 with SP1. SharePoint administrators
will be able to use this updated installer to deploy on Windows Server 2012 R2.
which I got linked from the following
http://blogs.technet.com/b/projectsupport/archive/2014/02/25/project-2013-and-project-server-2013-service-pack-1.aspx -
SharePoint 2013 OS: Windows Server 2008 R2 vs Windows Server 2012 Standard
Hi Team,
We are thinking on upgrading from SharePoint 2010 to SP 2013 soon. I have been researching about the server OS I should install as host, and it seems that SharePoint 2013 is fully compatible by now with both Windows Server 2008 R2 Standard + SP1 and
Windows Server 2012 Standard. In my opinion we should go with server 2012, but Windows server 2008 is the norm here at our organization and our Infrastructure team seems reluctant to upgrade servers to 2012 yet.
My question is, what SharePoint or Windows 2012 features will we miss if we decide to stay on Windows 2008? What are the perks (selling points) of going with 2012 over 2008? (besides the obvious Microsoft support range extension).
Thanks!
-Rob.If you stay on Windows Server 2008 R2 you will enter the extended/out of support phase sooner, of course. You will miss out on IIS improvements, although in practical terms it may not mean much.
There are extra patches required for a 2008 R2 deployment that are not needed on 2012 for SharePoint 2013. But other than that, I think the other big issue is that mostly in the community, you'll find people running Server 2012 which means issues are better
'known' by the community, versus 2008 R2 in combination with SharePoint 2013.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Maybe you are looking for
-
Itunes update will not install
itunes does not update. It says a new version is available. Iselect "download new version" but it does not download
-
Why "Podcasts" is not shown in iTune Library as an item?
Lately when I did my usual iTune podcasts synching, I found "Podcasts" as an item in the Library on the up left panel is not there any more. Anybody know why and how to fix this problem? Thanks for help.
-
The remote computer could not be found
Guys, Im having this error message pop up when I launch a remoteapp from an external network through the rd web access page. On the deployment settings I have the gateway setting to "automatically detect rd gateway server settings". This always givve
-
Can you remove "CALLS" from the HUB list and just utilize the phone icon instead? if so, how do you do this?
-
Hi All, Ive got a mid 2012 13" macbook pro. Since buying it, its had the ram upgraded to 8gb (by apple so genuine stuff) and a Samsung SSD fitted. Its been faultless up until tonight when suddenly, when scrolling in safari, its started juddering real