Is it OK to just upgrade one of the two RAM DIMMs in the Mini?
It comes with two 2-GB DIMMs, and I am ordering a single 4-GB DIMM.
Can two divorced chips share an apartment without driving each other crazy?
MD387LL/A is the model number.
Thanks!
Of course. It will work without any problem, but if both modules are of the same size, you can get a small performance increase with Dual Channel. Anyway, your solution is also valid.
I recommend you to get RAM from OWC or Crucial in order to make sure that it's compatible with your Mac > http://www.macsales.com
Similar Messages
-
I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3. I cannot find my photos and videos. I tried a restore, but after 3 hours, it's timing out. Pardon my ignorance on asking this question; but is there a way to find my photos? I do nto care about anythign else.
Here are the steps I though I took this morning:
Backup iPad
Connect to iTunes and downlaod newest version of iTunes and then newest iOS
restart Vista Laptop
upgrade to newest iOS
I knew somethign was wrong when it took about 6 hours to upgrade the iPad
at the end it errored with this message error (-50), but the upgrade worked
I was expecting to see all my photos but didn't see them
I have tried a restore to a back up 2 times. The first time took 3 hours and just sort of timed out - it kept saying that there was an hour to go
I tried it again 2 hours ago and same message.
They are very valuable to me and so now I am panicking
Your help is much appreciatedHi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario -
I've just upgrade to Premiere Elements 13. I found the Instant Movie option is not there anymore? is this feature removed? Any one has an idea?
dchankk
It is there. In 13, look under Create in the Expert and Quick workspaces. And, once you update from 13 to 13.1 using an opened projects Help Menu/Update, you
will see an extra location for the feature - right in front of you in the main panel.
ATR Premiere Elements Troubleshooting: PE 13: Adobe Releases Premiere Elements 13.1 Update
Please let us know if you are OK with the above information.
Thank you.
ATR -
I just upgraded to OSX Mavericks and when i use the gestures on my magic track pad it responds oddly. Sometimes it won't recognize when my simple gesture of scrolling through a document.
Gestures is not working like it did before. The side to side, forward back swipe, is very picky. Sometimes it takes four or five tries before it works. And yes I know how to do it. I have had a magic trackpad for about one year. And was greatly pleased by how it worked, BEFORE Mavericks. It has has indeed changed.
-
My husband has an iPad and I just got one for me. We both have the same e-mail address. The message I get when I try to initiate setup is that the Apple ID is already in use. Any ideas on how to complete the setup of the new iPad since we both share the e-mail account?
If you selected open a new Apple ID account, go back a step and enter use existing Apple ID.
You will have to set up a separate iCloud account or your iPads will mirror each other. -
i just upgraded to iOS5. I did not receive the info in my email to activate the icloud account. My email adress is not the same as my Apple id, but my correct email adress is indicated in my account and in the msg indicating to check...
Start here, change your country if necessary and go to manage your account and request another email.
-
Just upgraded to latest iTunes for Windows. Rebooted the PC as required after the update. When I start iTunes I get a popup message saying "An unknown error occured (-42110)."
What does it mean?
How do I fix it?
Thanks!Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
iTunes: Advanced iTunes Store troubleshooting -
I have Adobe Photoshop CS4 and have just upgraded my Mac operating system to Yosemite with the newest version of Java 2014 running. When I try to access Photoshop from Bridge or directly open it asks for a Legacy Version of Java 6. As I am a pensioner I cannot afford an upgrade does anyone know of a work-around for this problem?
Hi Daddyfred,
CS4 Photoshop has not been tested on Yosemite. But still you can try the Java 6 update using the below link.
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase6-419 409.html
Thank you for posting on Adobe Forums. -
I have just upgraded to 10.6.7, and was browing the App. Store, I selected a product by mistake and it started to download, I cancelled the download, but it still registers in my purchases list, have I purchased that appl.? and how can I cancel the purchase in my purchases list?
I think that as soon as you click "Buy" and type in your details, the iTunes server is alerted that you have bought the item, even if it hasn't downloaded. Your "purchased" list is based on your account and not your computer so I'm afraid even if you haven't completed the download, you will be charged for it (but if you do now download it, you won't be charged again). This also means that you can't remove items from the purchased list.
Glad to be of help (I hope),
Jonathan -
I just upgraded to iOS 7 and I realized that the "Completed" tasks folder in the "Reminders" application was erased. I had important information there. How can I recover my completed tasks and the dates the tasks were completed?.
Restore from your iTune backup.
-
I have a MacBook Air, which I just upgraded to OSX Lion. I also have the latest version of iTunes. When I try to stream to the AirPort, the Airport resets, and the wireless connection on the macbook locks up. Any suggestions where to start?
To free up hard drive space the best bet is to move data files that you don't need access to all the time. Likely candidates are music, video, and photos. Things like word processing and spreadsheet files can also be moved but they tend not to be very large and so don't free up much space. The problem with moving the above mentioned files is that iTunes and iPhoto need to know where the files are stored.
Here's an article explaining how to move the iTunes folder. You can move the iPhoto library using the Finder but there is a slight complication. Start iPhoto, open the Preferences and click on the Advanced tab. The first option is "Copy items to the iPhoto Library". If this option is checked, copy the iPhoto library to your external folder (drag it from the Pictures folder to your external drive) and then delete it from your Picture folder. If this option is not checked, it is a bit more complicated and we'll need to talk a bit. -
Just upgraded Yosemite and now I can't find the calculator? Where can i find it?
Just upgraded Yosemite and now I can't find the calculator? Where can I find it?
The icon for the calculator is especially poor, among the many poorly legible icons developed for Yosemite.
It's a gray box with an orange stripe on the right side. -
How do I open up a .7z file just over 1gb in size? I have just downloaded this as an upgrade from Adobe Photoshop Elements 8 to version 12. I cannot see any sign of the Akamai program on my computer that is supposed to open and install the two files that I downloaded.
Thanks Hans
I don’t mind mountain climbing but anything serious to do with a computer scares me silly.
I installed the 64 bit version of 7zip and once I figured out how to tell the computer to use the right application within that to open the 7zip file, the big file opened and I was able to apply the .exe file to get things going and installed. In the end the default location the installation chose was program files x86 which I think is the 32 bit folder but it all seems to be ok now.
Many thanks again for your response.
Cheers
Peter -
I just recently upgraded to Firefox 5.0.1 and now the "lock" icon doesn't appear anywhere (I can find) when accessing secure websites. I haven't seen it once. It used to appear in the lower right corner of the screen. I also have Norton Internet Security.
Padlock is no longer part of Firefox; it was removed beginning in Firefox 4. The padlock shows that there is a secure connection but does not supply additional information. You could have made a typographical error and still have been connected to a secure connection. The padlock was replaced in Firefox 3 with the Site Identity Button. Familiarize yourself with the Site Identity Button at the left end of the Location Bar:
*https://www.mozilla.com/en-US/firefox/security/identity/
*https://support.mozilla.com/en-US/kb/Site+Identity+Button
*http://www.dria.org/wordpress/archives/2008/05/06/635/
You can install this add-on if you wish: *https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
please help ive just upgraded from lightroom 3.6 to 5 as a download but it wont open when i click it on my MAC os 10.7.5? any help much appreciated as it is really annoying me as I cant find any help on this on the internet
thank you very much in advanceWhat happens??? What are your system specs??
Maybe you are looking for
-
Saved PSD files show up as small thumbnails oinly in Bridge
Ive been working on some photos in ACR/CS2 and a strange thing happened. After working on raw files I save them in a separate working folder as psd files. Suddenly, for no apparent reason, my PSD files are showing up in Bridge as tiny thumbnails. Thi
-
Order Address per Line Item in OLA
Hi, hoping someone can help with an OA/OLA query. One of our Buyers would like to use a different ordering address for one of the line items in an OLA. Is there any way to set up an Ordering Address per line item in the OLA? Or does she need to cre
-
What is the Best was to create a newsletter application using BEA / Documen
Hi, I have some queries. What is the Best was to create a newsletter application using BEA / Documentum The newsletter will be republished and users will see new content every month. We plan to use BEA portal 8.1 sp3 with Documentum 5.3Sp1 / SCS. The
-
Slow running after install of 10.4.4
Since installing Tiger several applications either don't respond at all, or respond slowly to file>open or file>new. Just get spinning RGB wheel. Sometimes this behavior abates with restart. Do I have to re-install Tiger? The apps (CS, MicroOff, Stuf
-
iTunes was working fine until I installed an update iTunes promted me to install. iTunes has never ran since. Since the update the below error occurs when trying to start iTunes. The instruction at "0x10001040" referenced memory at "0x10001040". The