Is it OK to open a CR Report with JRC/Gemini which is modified by RAS SDK?

Dear all
Is it OK to open a CR Report with JRC/Gemini which is modified by RAS SDK? Especially after I use RAS SDK to change report database location.
I test it OK, but my Customer need to confirm this.
Thanks a lot.
David

RAS SDK - meaning RAS server?
There's intrinsic limitations for Crystal Reports Java (JRC for CR4E Version 2), such as database connectivity (only Java-based ones) when compared to RAS server.
But CRJ does support Crystal Reports 2008 reports within those limitations.
By the way, the new CR4E Version 2 Crystal Reports Java SDK is essentially the in-process RAS SDK - so you can make modifications using that. Note that JRC SDK (version 11.8 and below) are deprecated with CR4E Version 2), then new way si the the Crystal Reports Java SDK.
Sincerely,
Ted Ueda

Similar Messages

Error when trying to open a WEBI report with OpenDocument.jsp

I have a weird problem, i'm trying to open a WEBI report with OpenDocument.jsp and I get the following error message
An error has occurred: Could not find the document.
the weird thing is that this error only occurs when i use Internet Explorer. When i use the same link with Google Chrome, i see my report.
How do I make this work, our standard web browser is Internet explorer.
here is a sample link i use to call my report.
http://<server>:8080/OpenDocument/opendoc/openDocument.jsp?iDocID=AVGrgQALGJZGipKCfjPPZ3g&sIDType=CUID
Our BO environment is :
BO XI 3.1 sp2 fp 2.3
tomcat 5.5 front-end

Hi,
I don't know how much this solution will help you but it is worth trying.
SAP Note: 1198844
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3131393838343426]
Regards,
Bashir Awan

Open Purchase Orders Report with Confirmation Dates

Hi Friends,
I have searched a lot for the following need and I have found nothing. I was wondering if there ia any report that I can show the scheduled delivery dates from a Purchase order. I have seen in ME2L that by placing EINT in scope of list I can see the schedule lines. However, if there is a new delivery date due to supplier confirmation that have been placed in PO with the indicator AB this is not appeared. At the same time if there is a partial quantity that has already been delivered then it does not appear as well. So, I need a report with all the scheduled delivery line plus the open quantity.
Many Thanks in advance,
Ioannis

It is very strange. Because what I see is that in this report the confirmation date is not appeared although the schedule line is appeared. Then If I go to change the confirmation date in PO for second time then it is appeared. I have no idea why this is happening

Open Business Objects report with J2SE

Hi, How can I do to open a Business Objects report with J2SE aplicattion?
Thanks,

Depending on the version of Crystal Reports / Business Objects you have, there are Java libraries you can use to connect to the Business Objects Application server. I spent a lot of time on BO's website figuring it out. In the end i only needed a few libraries to connect, and ask the server to print a report. I remember that there was a way to have the server send a pdf as a binary stream, that you could then save as a pdf file and read. You can do a lot more with the SDK, to the extent of creating your own report creation tool. If you would like some specifics, i might be able to find the some of the documentation i used. It all came from the BO website.
Wish i could be more help
chip.
Edited by: Chipper on Mar 3, 2010 3:29 PM

Open sales order report with billing date.

Hi,
I want to know if there's an available report for open sales order with billing date field.
Thank you.

Hi,
If your case is "Order-related" Billing,you can use the T.Code "VF04" for this purpose.
One more way is to go for a custom report.
Make a copy of code of the T.Code "VA05n"(Program Name is "SD_SALES_ORDERS_VIEW").
Change the code as per your requirement to display the field "Billing Date" in the report.
Check with your ABAPer if you wish to go for a custom report.
Regards,
Krishna.

Open a 10g report with Report 6i

Hi.
I'm developing some reports (.rdf) with Oracle Forms 10g. The same reports have to run under an old server, so I have to open them with Oracle Forms 6i.
When I try, a message pop-up says "Warning: Opening a report saved witha newer version of Report Builder. Functionality may be lost. Continue?"
I answer "continue" and then it crashes.
Any ideas? I tried to find some like "Save compatibility with older versione" in Reports 10g, but I found nothing.
Thanks.

This is not possible . Too much has changed between the version. You can do it the other way though 6i to 10g

Customized responsibility not run " Supplier Open Balance Letter Report"

I have customized standard Responsibility from " Payable Manager " , this Responsibility run the " Supplier Open Balance Letter Report" with completed Error Status . ?
Even it has same Request Group " All Reports " and " Payables " Application.
The Error Message in the log is =
ERR REP-1401: 'beforereport': Fatal PL/SQL error occurred.
needs help urgently.
Message was edited by:
alihaddawi

Dear,
I have Enabled the parameters ( Debug Flag , Trace Flag) with checking Display of both , ran the Report got that from LOG this one:
Payables: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXSOBLX module: Supplier Open Balance Letter
Current system time is 23-SEP-2007 09:46:02
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_AS_OF_DATE='2007/09/01 00:00:00'
P_SUPPLIER_NAME_FROM='BABYLON Eagles Security Co.'
P_SUPPLIER_NAME_TO='BABYLON Eagles Security Co.'
P_CURRENCY='USD'
P_INCLUDE_PREPAYMENTS='Y'
P_MIN_INVOICE_BALANCE='0'
P_MIN_OPEN_BALANCE='0'
P_DEBUG_FLAG='y'
P_TRACE_FLAG='y'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
LOG :
Report: F:\oracle\prodappl\ap\11.5.0\reports\US\APXSOBLX.rdf
Logged onto server:
Username:
LOG :
Logged onto server:
Username: APPS
ERR REP-1401: 'beforereport': Fatal PL/SQL error occurred.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 3
Cause: The program terminated, returning status code 3.
Action: Check your installation manual for the meaning of this code on this operating system.
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 268930.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 23-SEP-2007 09:46:03
---------------------------------------------------------------------------

Logon Screen when opening a Crystal Report from Add-on

Hello everyone,
I have a problem that I've been trying to solve. I have an addon that opens a Crystal Report with the information that the user wants. I tried it in SBO using a SQL db and it worked without problems, but now I've test it in SBO using IBM DB2 db (the client has that db implemented) and the report doesn't open, instead of the report it appears a log in screen asking for the server name, database, user and password.
I've tried every possibility without success, it returns a message saying that my login is not correct, the thing is that all I've written in that login screen is the correct info, even tried many possibilities... and I can't access to the report!
I've searched lots of forums for an answer, but none of them helped me. Can anybody help me with this issue?
Thank you very much,
Regards,
Mariana Mazzero

in case you do sure that is just lose some dll file,I think maybe you can create a install package by using Visual Studio.
you can create a form and put a crysyal object on the form. and use the wizard.
Visual Studio will auto collect all dll you needed.
than you can compare the file list,
or, you can just install the package on the standalone PC.
It's a stupid solution.
but, I think it is effective. :P

Open a Crystal Report, run and export

I am looking for help with respect to running a .rpt report developed in crystal report 2008 from a jsp or java. I need to set the parameters and export the report to PDF. I am looked at many different examples and still I am getting various kinds of error. Please can any one help me out on this.
Thanks a lot.

I am getting the below error message when I am trying to open a crystal report from the repository which is using a universe.
java.lang.NoSuchMethodError: com.crystaldecisions.proxy.remoteagent.ICommunicationAdapter.setProductLocale(Ljava/util/Locale;)V
     com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source)
     com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source)
     com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.openDocument(Unknown Source)
     com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.openDocument(Unknown Source)
     org.apache.jsp.test3_jsp._jspService(test3_jsp.java:93)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:98)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:331)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:321)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:257)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
I am using the below code
     // Get the Report Application Factory service from Crystal Enterprise
     IReportAppFactory rptAppFactory = (IReportAppFactory)boEnterpriseSession.getService("", "RASReportService");
     // Get the InfoStore service from Crystal Enterprise
     IInfoStore boInfoStore = (IInfoStore)boEnterpriseSession.getService("", "InfoStore");
     // Retrieve the report by name from Crystal Enterprise
     IInfoObjects boInfoObjects = boInfoStore.query("Select SI_ID From CI_INFOOBJECTS Where SI_NAME = '" + reportName + "'");
     // Open the report into a Report Document object
     ReportClientDocument rcd = rptAppFactory.openDocument((IInfoObject)boInfoObjects.get(0), 0, Locale.ENGLISH);
Can I please get some help in how to resolve this issue.
Thank you very much.

Currency symbol not shown when loaded report using JRC

I'm trying to show the currency symbol in the report file. the .rpt files is already designed with MS Access table but now im reusing the report and populating pojo classes to map with tables. the report that is bound with MS Access table shows currency symbol in currency fields. but when I load report with JRC, it is not showing. I tried to change Fieldformat also programattically as below.
ReportObjectController reportObjectController = report.getReportDefController().getReportObjectController();
ReportObjects reportObjects = reportObjectController.getReportObjectsByKind(ReportObjectKind.field);
if (reportObjects != null && !reportObjects.isEmpty())
                 for (int i = 0; i < reportObjects.size(); i++)
                     IReportObject reportObject = reportObjects.getReportObject(i);
                     if (reportObject instanceof IFieldObject)
                         IFieldObject fieldObject = (IFieldObject) reportObject;
                            IFieldFormat ifFormat = fieldObject.getFieldFormat();
                         ifFormatObject = (IFieldFormat) ifFormat.clone(true);
                         break;
for (int count = 0; count < tables.size(); count++)
                    // Set data source for each table
                    setDataSourceForEachTable(tables.getTable(count).getAlias());
reportObjectController = report.getReportDefController().getReportObjectController();
reportObjects = reportObjectController.getReportObjectsByKind(ReportObjectKind.field);
if (reportObjects != null && !reportObjects.isEmpty())
         for (int i = 0; i < reportObjects.size(); i++)
             IReportObject reportObject = reportObjects.getReportObject(i);
           if (reportObject instanceof IFieldObject)
                         IFieldObject fieldObject = (IFieldObject) reportObject;
                         if (fieldObject.getFieldFormat().getNumericFormat() != null)
                              fieldObject.setFieldFormat(ifFormatObject);
                              //fieldObject.setFieldValueType(FieldValueType.currencyField);
                              break;

Above code just get one of the currency field and clones the format. And after setting the pojo datasource, I'm again setting the cloned format to that particular field. But still Im not getting currency symbol in the reports that are loaded via JRC. even I set locale before opening the report. but that also not helping.
report.setLocale(Locale.UK);
report.open(reportName, 0);
Please guide me, If I'm wrong in this.

Passing Parameters to Procedure based sub report thru JRC

Hi
I am using storedprocedure based main report with a subreport and i am trying to invoke these reports with JRC.
I am passing parameters to main report then it is asking parameters for subreport then i placed following statement by placing subreport name
param2.setReportName("detailed_aging_report_wk.rpt");
but after using this statement it is prompting for main report parameters.
How i can pass the same parameter values to both main and sub reports?
Thankyou.

Here is a snippet code that demonstrates how to pass a parameter to a subreport, you can accommodate it and test it and see if you still have the same behaviour. What you need to do is to add the code to set the parameter of the main report.
<%
/* Applies to: XI
* Date Created: April 4, 2005
* Description:     This sample demonstrates how to pass parameters to a report that
*                    contains a subreport using the Crystal Reports Java
*                    Reporting Component (JRC) SDK.
* Author: HP, CW
try {
     //check to see if the report source already exists
     Object reportSource = session.getAttribute("reportSource");
     //if the report source has not been opened
     if (reportSource == null)
          //---------- Create a ReportClientDocument -------------
          ReportClientDocument oReportClientDocument = new ReportClientDocument();
          //---------- Set the path to the location of the report soruce -------------
          //Open report.
          oReportClientDocument.open("jrc_set_subreport_parameters/jrc_set_subreport_parameters.rpt", 0);
          //Get the report source
          reportSource = oReportClientDocument.getReportSource();
          //Cache report source.
          //This will be used by the viewer to display the desired report.
          session.setAttribute("reportSource", reportSource);
     //---------- Create the Parameter Field Objects -------------
    //Create a Fields collection object to store the parameter fields in.
    Fields oFields = new Fields();
    //----------- Initialize the parameter fields ----------
    //Set the name and value for each parameter field that is added.
    //Values for parameter fields are represented by a ParameterFieldDiscreteValue
    //or ParameterFieldRangeValue object.
    //NOTE: Be sure to map the names of the parameters and their
    //respective types against the correct type that the parameter
    //field values was defined to accept in Crystal Reports.
    //NUMBER VALUE PARAMETER.
    Integer numberValue = new Integer("55");
    //STRING VALUE PARAMETER.
    String stringValue = "String parameter value.";
    //BOOLEAN VALUE PARAMETER.
    Boolean booleanValue = new Boolean("true");
    //DATE VALUE PARAMETER.
    Calendar calendar = Calendar.getInstance();
    calendar.set(2004, 1, 17);
    Date dateParamVal = calendar.getTime();
    //DATE-TIME VALUE PARAMETER.
    Calendar calendar2 = Calendar.getInstance();
    calendar2.set(2002, 5, 12, 8, 23, 15);
    Date dateTimeParamVal = calendar2.getTime();
    //CURRENCY VALUE PARAMETER.
    Double currParamVal = new Double(555.99);
    //TIME VALUE PARAMETER.
    Calendar calendar3 = Calendar.getInstance();
    calendar3.set(2002, 5, 12, 13, 44, 59);
    Date timeParamVal = calendar3.getTime();
    //Set all of the parameter values using the utility function.
     //Since we are passing parameters to the subreport, it is here that we set the
     //subreport name; if you are not passing a parameters to a subreport, the
     //report name will be an empty string
     setDiscreteParameterValue(oFields, "NumberParam", "SubreportA", numberValue);
    setDiscreteParameterValue(oFields, "StringParam", "SubreportA", stringValue);
    setDiscreteParameterValue(oFields, "BooleanParam", "SubreportA", booleanValue);
    setDiscreteParameterValue(oFields, "DateParam", "SubreportA", dateParamVal);
    setDiscreteParameterValue(oFields, "DateTimeParam", "SubreportA", dateTimeParamVal);
    setDiscreteParameterValue(oFields, "CurrencyParam", "SubreportA", currParamVal);
    setDiscreteParameterValue(oFields, "TimeParam", "SubreportA", timeParamVal);
    //Push Fields collection into session so it can be retrieved by the viewer and set
    //at view time.
    session.setAttribute("parameterFields", oFields);
     //Redirect to the viewer page to render the report
     response.sendRedirect("CrystalReportViewer.jsp");
catch(ReportSDKException sdkEx) {
     out.println(sdkEx);
%>
<%!
* Utility function to set values for the discrete parameters in the report. The report parameter value is set
* and added to the Fields collection, which can then be passed to the viewer so that the user is not prompted
* for parameter values.
private void setDiscreteParameterValue(Fields oFields, String paramName, String reportName, Object value) {
     //Create a ParameterField object for each field that you wish to set.
    ParameterField oParameterField = new ParameterField();
    //You must set the report name.
    //Set the report name to an empty string if your report does not contain a
    //subreport; otherwise, the report name will be the name of the subreport
    oParameterField.setReportName(reportName);
    //Create a Values object and a ParameterFieldDiscreteValue object for each
    //object for each parameter field you wish to set.
    //If a ranged value is being set, a ParameterFieldRangeValue object should
    //be used instead of the discrete value object.
    Values oValues = new Values();
    ParameterFieldDiscreteValue oParameterFieldDiscreteValue = new ParameterFieldDiscreteValue();
    //Set the name of the parameter. This must match the name of the parameter as defined in the
    //report.
    oParameterField.setName(paramName);
    oParameterFieldDiscreteValue.setValue(value);
    //Add the parameter field values to the Values collection object.
    oValues.add(oParameterFieldDiscreteValue);
    //Set the current Values collection for each parameter field.
    oParameterField.setCurrentValues(oValues);
    //Add parameter field to the Fields collection. This object is then passed to the
    //viewer as the collection of parameter fields values set.
    oFields.add(oParameterField);
%>
Cheers

Build report with Jdeveloper

Hi all
I'm using Jdeveloper 10.1.2 and I would like to build reports .
Is there any way to do with ADF. Otherwise can you advise me how to do ?
thanks

It all depends on how you define a report and what are your specific needs.
You can look at Oracle Reports at - http://otn.oracle.com/products/reports for a full blown reporting engine and development tool.
You can also integrate the open-source Jasper Reports with JDeveloper (search the forum for previous posts that will show you how).
And there is also the XML Publisher here:
http://www.oracle.com/technology/products/applications/publishing/index.html

Scheduling a webi report with no access to univ. connection

Hi,
I have a user in BO enterprise, who has access to a report, but no access to the universe & universe connection.
So ideally, the expected behavior is that, when the user schedules the report, the schedule should fail.
When I do a schedule, by clicking on the prompts, and modify, it throws me an error that the Universe and universe connection are not accessible.
But when I schedule the report, with all default settings (without modifying the prompt values), it schedules, and shows a Success status. (Though the report shows blank data)
Has anyone observed this before? Any info on this would be helpful.
Thanks.

Hi,
The use-case is:
- An administrator creates a new user (by default belongs to Everyone group) and provides access to a particular report including the scheduling privileges
- The Everyone group does not have access for the Universe or the Connection
- When this user runs the report (View on Demand) and refreshes the data (via the Refresh Data button), the error is thrown stating that the universe is not found/not accessible.
- When scheduling the same report, we see different behaviors (one of the prompt option happens to be a List of Values:
- Changing the prompt values - Clicking the modify button on the parameters page and trying to select a value for the LoV prompt throws me the Universe not found/accessible error (which is correct as the concerned user does not have access to the universe or the connection)
- With default prompt values (i.e. not changing any of the prompt values in the parameters page) - This shows that the schedule was successful and when i open the instance, it shows me blank report - The question here is, why would the schedule succeed when the user does not have the access to the universe/connection?
Thanks -
Chandra

Report with multiplying columns and WITH clause

Hello
I saw sth strange in my report. I assume that it could happens very often.
I have report with few columns which two of them ar most complicated (many joins subqueries aggreagations on joined values etc.) These two columns (i.e C3,C4) should be multiplied (C3*C4).
When i do pure report without multiplying only columns C1,C2,C3,C4 everything is ok - duration about 15 sec. but... when I put next column on report which multiply these columns (in Answers C5=C3*C4)
I wait 3-4 minutes and my database hungs :(. After investigation I saw that in first case to databese goes pure "SELECT" statement it means:
"Select ... as C1, ... as C2, max(...) as C3, sum(xxx)... C4 from yyy,sss,ttt WHERE aaa"
but in second case BI uses WITH clause it means:
WITH SAWITH0 AS
( Select ... as C1, ... as C2, max(...) as C3, sum(xxx)... C4 from yyy,sss,ttt WHERE aaa )
SELECT SAWITH0.C1 as C1,
SAWITH0.C2 as C2,
     SAWITH0.C3 as C3,
     SAWITH0.C4 as C4,
     SAWITH0.C3*SAWITH0.C4 as C5 FROM SSS
and this statement is long runninq query and kills my database :(.
I checked that SQL like this:
Select ... as C1, ... as C2, max(...) as C3, sum(xxx)... C4, max(...)*sum(xxx)... As C5 from yyy,sss,ttt WHERE aaa" -
runs few times faster than that above
I know that I can do this multiply in business model layer but sometimes users can multiply(or other operations) on columns in reports without my knowledge and it kills my db :(. Where is bug? Why SQLs with WITH clause takes so much db time?
Thank you for each kind of help

WITH clause or Subquery Factoring allows the set of data to be reused multiple times within the SQL. Oracle will usually materialize the data into a temporary table (you will see it if you take an explain plan of the SQL).
I would be surprised if it was the actual WITH clause that was causing the performance issue, however you can test this by turning the WITH clause feature off. Go to the Physical model, right mouse click on your Database > Properties > Features Tab, scroll down to WITH_CLAUSE_SUPPORTED and switch it off.
I'd be interested to know if you do see actual improvement.
Good Luck.

View BIP report with parameter in Dashboard, but the parameter not appear

OBIEE 10.3.4.1 on Redhat 5.2.
I have a BIP report with 3 parameters which work fine in BIP. Now I embedded it in BI Dashboard, but not see the parameter menu when view in Dashboard. Is this the feature, or I missed something.
Thanks.

On the BI publisher Report Properties window, for Display Mode, select 'Link'. Then you should see the Report Object appear as a link, save and on the dashboard page when you click that link, the BI publisher report will show with the parameters..
Thanks,
Bipuser
Edited by: BIPuser on Jun 3, 2011 9:36 AM

Is it OK to open a CR Report with JRC/Gemini which is modified by RAS SDK?

Similar Messages

Maybe you are looking for