Is it okay to eject my ipod classic 5th gen when it's in disk mode when it hasn't connected to itunes and windows won't recognize it?

I use windows eight um the Itunes version i have is the most recent is the most recent. So what happened is that I had the sad Ipod thing displaying but after it dying and letting charge it worked fine but wouldnt connect to computer or Itunes. So I put into disk mode and it says do not disconnect but windows gave me an error message of an unrecognized device and it doesnt show in Itunes so no idea what to do next. Help plz.

Hi ..
Try the troubleshooting steps here >  iPod: Appears in Windows but not in iTunes

Similar Messages

  • Computer says iPod is there, but iTunes and Windows won't recognize it

    I've had a 60GB ipod photo for about 4 years and it has served me well. This morning the iPod froze in the middle of a song. I hit reset, and it came back blank - all the files were gone. When I got to work and hooked it up to my computer, iTunes and Windows can't recognize it, but I can find it in device manager - which means I couldn't do restore.
    I hit reset a few more times, changed USB ports and, somewhat miraculously, the iPod came back, complete with all files. On the way home from work it happened again and I haven't been so lucky.
    I forced it into disk mode and iTunes recognized it, but told me it was corrupt. I also received a computer sound card error - my sound card was busy, and an error stating that audio/video playback could be limited. I tried restore, but I received the unknown error. I'm using the latest version of iTunes and I'm all out of ideas.
    Any suggestions or should I put this iPod to rest and save up to buy a new one?
    Thanks

    The most likely problem is that the hard drive in the iPod is becoming unreliable. It may be experiencing sticktion, which is friction that makes the spinning platter stick and the motor cannot get it spinning. The iPod is regularly spinning the hard drive up, to cache songs into memory, and then spinning it down, to save power. If the drive was not able to spin up when commanded (in the middle of a song), the iPod would seem to lock up. Later, bumping the iPod may make the hard drive spin again, so it seems to work again, at least for a while.
    If this the the problem, the only way to fix it would be to replace the hard drive inside.
    You might try reformatting the iPod using Windows, if you can get it to appear in a My Computer or Windows Explorer window. Use a full format instead of a quick format. If that process competes successfully, run iTunes and try using Restore again to install and initialize the iPod's software.
    If formatting does not compete successfully, it may be time for that new iPod.
    You can do some experimenting on the old iPod, if you're into such things. I have successfully installed a compact flash card (through an adapter), inside a 4th gen iPod as a replacement for the hard drive. It is only 4GB at the moment, but CF cards up to 16GB are getting relatively cheap, so I might get one of those and start using by old broken 4G iPod again, +now with shock-resistant energy-saving flash-based storage+.

  • IPod Classic 5th Gen

    My iPod classic 5th gen will not do absolutely anything even when plugged into a working charger. Ive tried resetting it but there is not even an apply logo pop up screen, it absolutely does nothing.

    Have you tried a reset of the iPod?  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Otherwise, try a restore of the iPod in iTunes.
    See here more help on skipping tracks.
    http://support.apple.com/kb/TS3217
    B-rock

  • Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods.  I have reset the classic several times and same issue happens, any ideas?

    Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods.  I have reset the classic several times and same issue happens, any ideas?

    I have that exact same problem! It plays albums fine. But individual songs including ones downloaded from iTunes either skip or play the music of another totally different song. All play fine on iTunes and my iPhone... Got this one to replace my dying 5th gen classic.
    I hope there is a fix for this, cause it *****!!!!

  • I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb.  The problem I'm having is that it will not more than about 5.4gb worth of songs.  The iPod begins to freeze mid sync and the (-69) error message haults the sync.

    I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb.  The problem I'm having is that it will not sync more than about 5.4gb worth of songs.  The iPod begins to freeze mid sync and the (-69) error message haults the sync process.  The hard drive has been upgraded, it has a new logicboard (with 128mb RAM), new housing, battery, hold / headphone jack.  Basically the only original parts are the bezel, click wheel, screen, and data ribbons. Have attempted the 3Rs and have also tried to isolate potentially corrupt audio files and remove them, but this did not seem to be the primary cause.  The sync failure consistently happens at just under a 1000 songs (5.4gb) and then it starts to error (-69) any song after that.  Your advise would be enthusiastically received.

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Ipod classic 5th gen 80 GB, cannot add more files past 12.9 GB

    I have an ipod classic 5th gen and I can't add any songs or videos past 12.9 GB even though its an 80 GB capacity.  I keep getting the error messages:
    "Attempting to copy to the disk "ipod" failed.  the disk could not be read from or written to." 
    "The ipod could not be synced because it can not be read or written to"
    "itunes could not copy "x" to the ipod "ipod" because the file could not be read or written"
    I have already restored, updated, erased hard drive using disk utility and installed fresh copy of ios 1.1.2, replaced the battery, used all my usb ports, used firewire port, formatted on both windows and mac, and downgraded to 1.1.0, but still can't go past 12.9 GB. 
    What can I do to resolve this problem?

    By the sounds of it, you have pretty much exhausted all forms of troubleshooting for this type of issue.  It appears that the iPod's HD is beyond repair.  To verify that, see this older post from another forum member turingtest2 going over step-by-step instructions on how to perform a disk diagnostics on the iPod and what the resulting numbers mean.
    https://discussions.apple.com/thread/3784647?start=0&tstart=0
    B-rock

  • My Ipod classic stopped suddenly while playing on the dock. On checking it said connect to iTunes to restore and the battery had also exhausted itself. On connecting to iTunes it kept displaying the message Do Not Disconnect. It never worked after that.

    My Ipod classic stopped suddenly while playing on the dock. On checking it said connect to iTunes to restore and the battery had also exhausted itself. On connecting to iTunes it kept displaying the message Do Not Disconnect but showed the battery getting charged. Sometime later it said OK TO DISCONNECT. It never worked after that. Please help /guide to restore...

    Hello Harrywahi,
    Sorry to hear about the trouble you are having with your unresponsive iPod classic.  I found a resource that I think would help in a situation like this.
    I recommend following the steps in this troubleshooting assistant:
    iPod classic Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/classic/
    Thank you for posting in the Apple Support Communities. 
    Best,
    Sheila M.

  • My iPod classic, which is 6 years old is corrupted. A message that says ''Connect to iTunes to restore'' keeps on blinking on the screen, But when I connected it to iTunes it says an error has occured and my iPod has hung after i've disconnected it.

    My iPod classic, which is 6 years old is corrupted. A message that says ''Connect to iTunes to restore'' keeps on blinking on the screen, But when I connected it to iTunes it says an error has occured and my iPod has hung after i've disconnected it.

    Hi,
    Time to take your iPod in for service.
    You can make a Genius Bar reservation in advance if you are in the U.S.
    http://www.apple.com/retail/geniusbar/
    Carolyn 

  • Ipod classic 5th gen weird serial number 8L*****887

    Have an ipod classic 5th gen all functions perfect. connects to itunes. restores fine and all seems as it should except serial number on rear case of 8L******887 model no A1238 and serial number showing in itunes is u1******890.
    Anyone got any ideas????
    <Edited By Host>

    To be of any assistance, we need more info
    Which version of iTunes are you using?
    What is the iPod software version as shown in the iTunes summarry page?
    Which model of iPod Classic are you using?
    Can you play the music listed in the iTunes library?
    Most helpful if you try and get the error message or bring it in to the Apple Store for the Genius to have a look.
    Have a nice day!

  • IPod classic 5th gen. with sad face goes into disk mode but wont register in itunes

    I have an iPod classic 5th gen. A while ago it stopped working and the sad faced iPod started showing up. i've tried putting it into disk mode but when i do it wont pop up into itunes like it should and as soon as i unplug it the sad face appears again. is there anyway to fix it or is it done?

    There is a pretty comprehensive post written by another forum member which is about the sad iPod icon. You may find it useful.
    The Sad iPod/folder and ! icon.
    Btw, there's no such thing as a "4th generation 20gb classic." Your iPod is a 4th gen and not an iPod classic which is a completely different model.

  • Ipod classic 5th Gen stuck in recovery Windows Vista

    Alright, here are the details: my iPod classic 5th gen. is stuck in recovery mode,
    and it won't connect to iTunes so I can restore it. Now, I know I have the latest
    version of iTunes, I have deleted it & reinstalled it, and even restarted my
    computer, but it still won't come up in iTunes...What should I do??

    A person on youtube presented a fix by putting the ipod into disk mode and then plugging it into your Windows computer. Well... what happens on mine is the itunes dashboard does come up which to me means it recognizes an ipod is attached but after 30 mins. the icon showing my ipod never appears on the dashboard so I can open it to restore it. Any other suggestions are greatly appreciated (especially if you ever found something that worked).

  • TS1538 I have 6th gen iPod nano.  When I try to sync it my computer tells me it has malfunctioned and Windows does not  recognize it.  My iPhone syncs fine so the problem must be the iPod.  I have reset the iPod several times and no luck.  Any suggestions

    . I have 6th gen iPod nano.  When I try to sync it my computer tells me it has malfunctioned and Windows does not  recognize it.  My iPhone syncs fine so the problem must be the iPod.  I have reset the iPod several times and no luck.  Any suggestions?

    Hello Alexdad,
    We've an article that can help get your iPod Nano working with your computer.
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/TS3218
    Cheers,
    Allen

  • My iPod touch 5th Gen. wont start up past the apple logo,ive tried holding the power button and the home button,and it wont start up. What do I do?!?!

    My iPod touch 5th Gen. wont start up past the apple logo,ive tried holding the power button and the home button,and it wont start up. What do I do?!?!

    Try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I have an iPod Classic 5th Gen.  After 1 month I've lost all my music and playlist files.  The only files left are music I have purchased from iTunes.  How do I restore my music library to my iPod?

    I have an iPod Classic 5th Generation.  I have not used it for about one month.  When I turned it on, I had lost all my music and playlist files.  The only thing left on the iPod was the music and audio books I have purchased from iTunes store.  I tried to delete everything on the ipod by sliding the hold button and then pressing the center button and the menu and I saw the apple logo on the screen but the iPod wouldn't reboot.  Any suggestions as to how I can delete everything on the iPod and then plug it into my computer to restore my music library?  I am using a Windows 7 operating system.

    Does both your Windows and Macbook iTunes have the same library of songs?
    if it  does then, much easier to proceed, else try to load the Macbook with the same library as Windows.
    Note that only one of the Macbook USB port is good for iPod Classic, the other is too slow and may cause timeout, and I would suggest disconnect all other USB devices, while you Restore or Sync the iPod Classic.
    Connect the iPod to the Mac, (if iTunes launch, please close it back.)
    Use Disk Utility -> select the iPod Device->First Aid->Repair (use option FAT32)
    After the Repair complete, eject the iPod.
    Connect back to the Mac
    When iTunes launch, Restore the iPod when Prompted, (use FAT32)
    Sync your library.
    Good Luck!

  • Ipod classic 5th gen, it is synced to another pc it has  700 songs I don't want to lose, In itunes I said cancel when the sync and erase window pops up,I selected manually manage my ipod hit apply, pc locks up had to ctrl alt delete. what else can I do?

    I have anipod classic 5th gen, it is synced to another pc it has  700 songs I don't want to lose, In itunes I said cancel when the sync and erase window poped up,I selected manually manage my ipod hit apply, pc locks up had to ctrl alt delete. what else can I do? DoI have to sync the ipod? DoI have to reset the ipod?

    Copy all the contents currently on your iPod Classic to your new iTunes library and then choose the Erase and Sync option. See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

Maybe you are looking for