Is it okay to keep the Droid plugged in when it's finished charging?

My old feature phone would warn me to unplug it when it was charged as to avoid "overcharging."  However, with this phone, I assume that it stops charging when full since the lightning bolt goes away and the LED turns green.
I like to leave it plugged in when I'm at my desk or overnight when I'm sleeping.  I figure I use less of the battery cycles that way too.
Anyone know if this is bad practice?

Did u just get ur incredible if so there is a Tag that is attached to the cord that Says:    
1.Standard Battery 4.0 Hours
2.Extended Battery 5.0 Hours
When charging my Incredible i usally pute it on an let it charge till the green light comes on or i may for 1 hour  over that but never overnight: an usally if says it can stay on longer on the charger it will indicated that u can in the Instructions without harming the Battery or the Device but it say on this tag to remove when charging is complete: I wood contact HTC before going that long on a charge as it may Harm the Incredible an U dont want that to happen to Ur new phone!. a least i Wouldnt .

Similar Messages

  • Does it adversely effect the battery to keep the IPad plugged in when fully charged?

    Does it adversely effect the battery to keep the IPad plugged in when fully charged?

    Copied from Texas Mac Man ...
    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
     Cheers, Tom

  • Is it good or bad for the battery to keep the powercord plug in after complete charge.

    Is it good or bad for the battery to keep the powercord plug in after complete charge.

    It does no harm. It won't over charge.

  • Safari keeps saying missing plug in when trying to veiw video where do i get pluh in, safari keeps saying missing plug in when trying to veiw video where do i get pluh in

    safari keeps saying missing plug in when trying to watch video where do i get plug in im using 10.6.8 2.4 ghz intel core 2 duo

    That is all it says I went to watch the video on the iPhone 5 clicked on video and the video player box came missing plug in came up and the little black circle just kept spinning and that's it it works fine on google chrome Thanks in advance for help

  • I keep getting "missing plug-ins" when trying to open applications on websites - what is/are these?

    I keep getting "missing plug-ins" when trying to open websites applications - what is/are these? I have downloaded Adobe flashplayer and was advised to, but still showing up with this message?

    could also be java plugin or any plugin used on a website that you havent installed
    I would try to right click the place that say missing plugin to see if it provide some sort of info as to what plugin it is under the impression is missing

  • Will my iPad still get charged when I use my iPad with the plug in when it is fully charged?

    I'm wondering if my iPad will still get charged when I use it with the plug in when it is fully charged, because some computer battery's lifespan get decreased when you use them with the plug in when it is fully charged, but is it the same thing with the iPad or does it stop charging when it is fully charged?
    Thank-you! :D

    Tommy Kim wrote:
    So, it would be better to use my iPad plugged in to keep my battery's lifespan? And when I use it with my iPad plugged in, will it not charge but instead use that energy from the charger to power up my iPad?
    No it is not better to use it all the time when it is plugged in. Use the battery. That's what it is for anyway. See Michael Black's post above. That will wear the battery down and the performance of the battery over time.
    Use it on the battery and when it needs to be charged - recharge it. If you leave it plugged in after a full charge - it will not hurt. The battery will stop charging even if it is left plugged in.
    It is OK to use the device while it is plugged in - even for a matter of hours  - but not constantly or as a rule of them.

  • How do I keep the source document open when linking to a target document using the destination option in Adobe X?

    How do I keep the source document open when linking to a target document using the destination option in Adobe X? Have several links to create in the source document and want to keep the source document and target document open at the same time.

    Go to Edit - Preferences - Documents and un-tick "Open cross-document links
    in the same window".

  • Should I disconnect the charger once the battery is 100% full. Or can I use the laptop plugged even when the battery is full., Should I disconnect the charger once the battery is 100% full. Or can I use the laptop plugged even when the battery is full.

    Should I disconnect the charger once the battery is 100% full. Or can I use the laptop plugged even when the battery is full., Should I disconnect the charger once the battery is 100% full. Or can I use the laptop plugged even when the battery is full.

    You can leave the charger plugged in, as you cannot overcharge...charging automatically stops when your battery is full. Once every 2 ~ 3 months, its a good idea to drain the battery to about ~ 40%, then recharge to full. Otherwise, you can charge whenever you like & leave connected whenever you like.
    Try to avoid full battery discharges, Lithium batteries don't like that & frequent full discharge/recharge cycles will eventually kill your battery.

  • How do I keep the website's icon when creating a desktop shortcut as opposed to the firefox logo?

    When I click a website's icon in the address bar in Firefox and drag it to my desktop to create a shortcut to said site, the shortcut is created with Firefox's icon. I want to know how to keep the site specific icon when creating these shortcuts. I know that once the shortcut is created you can go into properties and choose from several generic icons but I don't want those cheesy icons. Can anyone help?

    If you drag a link or favicon on the left end of the location bar onto the desktop to create an internet shortcut then that shortcut gets the icon of the default browser.<br />
    If you want a different icon (favicon) then you have to assign that icon yourself to the desktop shortcut (right-click: Properties).<br />
    You can usually get the favicon if you append "favicon.ico" to the main domain of a website (e.g. http://www.mozilla.com/favicon.ico ) to display the favicon in a tab and save that image to a folder or see if you can find it in "Tools > Page Info > Media".<br />

  • How do I keep the find bar open when scrolling through multiple tabs?

    The newest update of Firefox doesn't allow me to keep the find bar open when shifting through multiple tabs. I've tried Findbar tweak however that erases the search criteria as soon as I try to scroll down the page to the next location. Anyone know how to keep the find bar open when i shift from one tab to the next?

    There is a more up-to-date "beta" version of FindBar Tweak you could try, if you haven't tested it already. You can find it on the extension's "Versions" page here:
    https://addons.mozilla.org/firefox/addon/findbar-tweak/versions/
    I did see one other extension with a similar purpose (I haven't tried it myself):
    https://addons.mozilla.org/firefox/addon/globalfindbar/

  • Should I keep the headphones plugged in at all times

    I have a classic 160GB iPod, which is really cool. I have since I brought it kept the headphones connected to avoid damage to the amplifier chip ..... do I need to be concerned. I have a Bose Sound dock and still keep the headphones connected when I dock ... again do I need to ?
    Finally I have just brought a Digital radio adapter which uses the docking connector but it has a headphone output which also acts as an aerial for the digital radio. So the question is do I need to use both headphone sockets or should I take care to avoid damaging the output amplifiers by not having headphone output impedance .....
    Any help appreciated from Apple engineering support to re-assure me

    Jules1963 wrote:
    I have since I brought it kept the headphones connected to avoid damage to the amplifier chip .....
    Huh!?? What are you talking about?
    Jules1963 wrote:
    I have a Bose Sound dock and still keep the headphones connected when I dock ... again do I need to ?
    No, you can safely unplug them. Besides, in my opinion, leaving headphones plugged in all the time risks physical damage to the headphone jack in the iPod from bumps and what not. Also I have heard several cases of people accidentally breaking off the headphone plug inside the headphone jack.
    Patrick

  • Am I supposed to leave the display plugged in when not in use?

    should the display be left plugged in when not in use? is it just like leaving the power cord to the MacBoold Pro plugged in when the computer is off?
    thanks

    Sure, you can leave the display plugged into the socket, provided you turn OFF the display itself. There must be somewhere some switch or touch button that will turn the display OFF.
    Usually, those displays use a lot of power, so it's better to save
    I shall add an unrequested piece of advice: if you don't this already, please use some kind of electrical surge protector
    <http://en.wikipedia.org/wiki/Surge_protector> to connect your computer, display, printer, router, etc to the wall socket.

  • How do I keep the email address showing when i enter hotmail because every time a different user enters you have to completely log in again

    before everyone's address was always on screen so you could easily log in, now there is only ever one address and I don't know what to do to keep the configuration as it was before

    The website maybe using autocomplete=off to prevent Firefox from filling the name automatically.
    You can remove autocomplete=off with a bookmarklet to test that.
    *http://kb.mozillazine.org/User_name_and_password_not_remembered

  • How can I keep the file/ album names when copying music from the Finder to iTunes?

    Hi,
    Is there a possibility to keep the file names one uses in the Finder when adding music to iTunes?
    [e.g. that a Beethoven symphony still ends up under 'Beethoven/ symphony No./' and not under the name of the orchestra/ dirigent]
    Thanks in advance
    Kath

    Yes.  Go into Preferences and make sure that "Keep..." and '"Copy..." are both not checked.  Then put the file(s) where you want them (preferably somewhere in your iTunes Media folder) and use the command File > Add File (or Folder) to Library.
    Try this first with a file or two so you can see that it keeps the same file name as it adds to your library.

  • Is it OK to leave the power plugged in when the computer is fully charged?

    I often have my MacBook Pro on my desk and it's a pain charging it up then running it down all the time. Would it be OK to just leave the power plugged in all the time? Is it bad for the battery or not?
    Cheers.

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os
    http://www.apple.com/support/macbookpro

Maybe you are looking for

  • How to do sql in database 10g

    Hi, I have downloaded oracle from the following site: http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/winsoft.html I have downloaded the following file which is on the above site: Download the Complete Files 10g_win32_db.

  • Sorting differences between Oracle and SQL Server

    Hello All, This question is related to both Oracle and SQL Server I have a requirement where I want to compare 2 tables line by line. One table is in Oracle and other table is in SQL Server And suppose that both of the tables don't have a primary key

  • Setting requestTimeout for cfdocument in CF7

    I have the following at the top of a .cfm page. The default requestTimeout value is 30 seconds, which is usually sufficient, but this is a hard-working page that sometimes goes over that limit. So I added the cfsetting to increase the limit to 90 sec

  • Text won't line up

    Hi, I'm trying to create a table with 3 columns and put writing in each column. However every time I enter text into the first column the text in the second column ends up halway down the page and lower down the page in the third column. Below is the

  • Getting statistics from multiple tables using conditional expressions (e.g. combining min, count, sum, etc) in PHP/MySQL

    Hi, I'm trying to get statistics from a variety of related tables where the statistical counts are based on comparing the value on one table with an equivalent value on a second table (and I want to view the results grouped by time period, day, week,