Is it okay to use a battery replacement that's 0.3V higher than the original battery?

My PA5024U-1BRS (10.8 V) Toshiba battery for my Satellite M840 got broken so I bought a new one from Toshiba but they gave me PA5025U-1BRS (11.1 V) which has a 0.3 V difference. When I ask Toshiba's technical staff if it's compatible with my laptop they said that's what their supplier from Singapore gave them so it's okay. But they honestly don't sound sure themselves. I can't risk losing my programs and files.
Though the battery pack came with an information sheet that both PA5024U-1BRS and PA5025U-1BRS both can be used in Satellite series (though it wasn't specified what models).
I'm just being careful so please help me. Is it safe to use a replacement battery for a laptop that's higher in voltage by 0.3 compared to the original battery?
Attachments:
aa.jpg ‏327 KB
10981960_793142430762134_1721326610165591521_n.jpg ‏110 KB

It's safe. There's a fairly wide tolerance on that voltage. For instance, this page...
   PA5110U-1BRS
..has this note.
This battery has the same compatibly as the Primary Li Ion Battery Pack (Part#: PA5024U-1BRS, 48Wh) that was shipped with select laptops. It is the direct replacement for Toshiba Primary 6-Cell Li Ion Battery Pack (Part#: PA5025U-1BRS)
-Jerry

Similar Messages

  • I am using iphone 5s, glass got broked, where can i get the original panel and what would be price

    i am using iphone 5s, glass got broked, where can i get the original panel and what would be price

    If you are from India ,here is how you get Out of Warranty service in India
    Out-of-Warranty Service
    Please contact an iPhone Authorized Service Provider for out-of-warranty service options.

  • HT5624 I WOULD LIKE TO HAVE MY PREVIOUSLY USED PASSWORDS CLEARED SO AS THAT I CAN USE THEM AGAIN. IT'S HASTLE THAT YOU HAVE TO CREATE NEW PASSWORDS THAT ARE HARDER TO REMEMBER THAN THE LAST AS YOU ALWAYS CHOSE SOMETHING EASY TO START WITH

    It's a pain to have to keep thinking of new and more elaborate passwords simply because you're unable to re call one temporarily.
    I'm signed into accounts most of the time and when I'm on another interface and can't recall or have access to my password then I'm forced to chose another. After a year and several situations like this I'm forced to create yet another non repeated password that only gets forgotton again from the fact it's something totally obscure to the standard passwords I use.
    Can't passwords be returned to use after a period if so required by the account holder.

    If you want to leave feedback for Apple then you can do so via this page (we are fellow users here on these forums) : http://www.apple.com/feedback/itunesapp.html

  • How do I sync my iPhone 4s with a different computer other than the original one that I used initally?

    How do I change computers for syncing my iPhone 4s?  The original laptop that I used to sync with died and I can not get my iPhone to sync with my desktop.

    can't if you do not have access to the old library (the usual workaround is to backup the old library and import it to the new itunes)
    for important data...
    sync your existing contacts with icloud, your text messages will not be disrupted, music will sync with whatever music you have on your new itunes, photos shoud still be in the camera roll (I would sync them to photostream before you sync, just in case).   Any photos on your phone that are not in camera roll or photostream... if you lost those pictures with the computer crash I would take screen shots (lock button + home button at the same time) of each photo so they show up in the camera roll.  App data may or may not be lost.  In my experience, it depends on the app.  Some of the apps recognize your apple ID and sync data over the internet with servers, some do not.  I would take note of important data (such as passwords in a password keeper if you have such an app) just in case if you lose that data.

  • HT1476 ever since I upgraded to ios 7, the battery life is very short and I do not use my ipad all that much.l have been on the phone to apple 3 times, turning off all kinds of things I so not use and have powered off more than before but it is still poor

    ever since I upgraded to ios 7, my battery life is very short. I do not use the ipad all that much and have to charge it twice as much as before. I have been on the phone to Apple 3 times and turned off a number of things that I am not using and now power it off more regularly but still not happy with battery life. It is less than a year old and as I said, I don' t use it all that much

    My best bet would be to restore the phone. Back it up to itunes, and then reset it Factory settings. This way, any corrupt software will be removed, and you can start fresh. Make sure you back it up first. By the sounds of it, you are using the phone for business and probably need the data from it. Hope this helps!

  • Can members of a family group use their own credit card or payment method other than the Family Organizer's credit card?

    In Family Sharing, is the Family Organizer's credit card the only method of payment for all family members? Or can family members also pay with their own credit card?

    Hello Trisa295,
    Family sharing payments are all managed by the Organizer, and only the billing information on that account can be used to pay for an iTunes purchase. Take a look at this info from the following article:
    Family purchases and payments
    With Family Sharing, one adult in the family—the family organizer—agrees to pay for any iTunes, iBooks, and App Store purchases that other family members initiate while they're part of the family group. This also includes ongoing subscription purchases initiated by family members, such as iCloud storage, iTunes Match, and Newsstand subscriptions.
    If the members of the Family have credits or have iTunes Gift cards redeemed, that balance gets used first so an option you all have is to apply iTunes credit in some way to these member accounts:
    After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card. 
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Is there a FM imbedded link used for phone numbers that in a pdf file activates the number on a smart phone?

    When I use the URL hypertext function and type in mailto:<email address> and save it as a pdf. When bringing the pdf up in a smart phone and tapping on the link, it will bring up email to that person. Is there a FrameMaker version that also does this for a phone number and what is the text that needs to be typed in? Any assistance would be greatly appreciated!!!

    What happens when you use Marker Type: [Hypertext]
    and a URI of form:
    message URL tel:1234567890
    In a quick test, this survives to PDF as hypertext, gets handed to my default browser, which (being a desktop machine) throws a dialog saying, in effect "Just what am I supposed to do with this? I'm not a phone you know." My phone, on the other hand has two PDF readers (Kindle and some shovelware office ap), neither of which appear to even notice the URL (which I take to be not FM's fault).
    The hand-off to email is not something that FM (or Acrobat) does per se. As far as I know PDF readers merely hand the URI to the host operating system. If the host knows what a "tel:" scheme name is supposed to do, it gets done. For a more or less complete list of scheme names, see the wiki page.
    Be sure to use fully qualified international dialing numbers.
    And be sure to avoid mistake 0 of FM hypertext markers: in addition to inserting the marker, it has to be within the scope of a unique Character Format applied to the text string to be made active. This tag doesn't even have to apply any visible effects, but it does have to be there, as it's how FM determines the boundaries of the hyper region. A Character Format set to Family:Default ¶ Format (and all else blank or As-Is), named "URI", would suffice.

  • Why is it that an amplitude-scaled sound does not play louder than the original sound using Play Waveform?

    I don't know if I have posted this on a correct location (kinda new here).
    I am trying to demonstrate the effect of multiplying a constant to a waveform. I have a sound file read by Sound File Read Simple.vi. Then I am trying to scale the amplitude of the signal by a constant number. I've tried three methods for this: the Numeric Multiplication, the express VI Scaling and Mapping, and the scaling and conversion VI of Signal Express. The waveform shows that the amplitude of the scaled signal is indeed scaled, but when played thru the play waveform VI, the sound level is still the same, no matter how much I am scaling the input. Does anyone why is this so? Also, I really wanted to show that scaling an audio waveform results in a louder waveform. How do I do this? As much as possible, I've wanted to use simple VIs as the class is an introduction to signal processing and the students (and so am I) are still finding our way into LabVIEW (we used to use MATLAB in the course).
    Attachments:
    scaling.vi ‏69 KB

    JaymeW wrote:
    Hi kirkbardini,
    According to this article about Low Volume From Sound VI, you can use a scalar multiple to increase the volume of a sound saved to a .wav file, so you should be able to do this before playing it.  Does that not work for you?
    That information is for Labview 7.x and hence outdated. As mentioned before. Labview do a normalization before sending data to the sound card. As you know sound cards are most often 16 or 24 bits. And in most cases data input to a sound card is in DBL type. After normalization the data is converted so the floating point value 1 represent full scale output on data sent to the the sound card DA. To get any further I suggest kirkbardini take the time needed to send us his/hers current code. Then we may solve things from there
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • Using a copy of the install DVD Family Pack rather than the original?

    I'm going to buy a 5 pack for my brother and his family, however given his track record of losing install disks - can I keep the original and send him a copy? I know making a back-up in allowed under Apple's license but in this scenario I would be keeping the original and sending a copy to someone else. My intent is to safeguard the original, not distribute multiple copies, but would this be considered acceptable under the terms of Apple's license?

    Create the duplicate and send both to your brother. It's time for him to get responsible.

  • I shut down firefox one day and when i started it back up all the tabs i had open from last session are still there.never used to be like that now every time i open the browser there are about nine of them..how do i prevent this?

    there are 11 tabs open when i open firefox v 6.01.and they are all from a previous session a couple weeks ago..

    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the files sessionstore.js [2] and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    See also:
    * [1] http://kb.mozillazine.org/Session_Restore
    * [2] http://kb.mozillazine.org/sessionstore.js

  • While trying to make in-app purchase sign-in required alert pops up. It takes me to my billing info saying my payment method was declined and to input a new credit card. I use a debit card that I know has more than enough funds on it. Any ideas?

    Billing method denied. I know for a fact that I have the money. Any ideas to whats wrong?

    Try purchasing and redeeming and iTunes gift card.
    Contact iTunes if yo know your current payment method is valid. Form the message it appears that it is not valid (has no funds)
    Apple - Support - iTunes - Contact Us

  • Is it okay to use my ipad on AC power when it fully carged?

    I want to maximize my iPad's battery life and use battery when it is needed.I want to know that whether It is okay to use my ipad on AC power when it fully carged

    Because the battery does not overcharge, it shouldn't hurt the battery - but - I don't use my iPad this way for days on end. That sort of defeats the whole portability factor of having a battery powered device like this.
    I will leave my iPad on the charger for hours at a time while I am using it - maybe all day long on weekends - and I still get about 10 hours a day out of a full charge. I did this my my original iPad that is 20 months old and the battery is still going strong.

  • I lost my ipod. Bought a used one to replace it. When I plug it into the computer, the computer doesn't even seem to realize it's plugged in. How do I put my existing itunes library onto the new (used) ipod?

    How do I clear out a used ipod classic and put my existing itunes library on it? I lost my previous ipod and bought a used one to replace it.

    Do one or more of the following
    > Restart your computer
    > Uninstall & Reinstall iTunes
    > Reset iDevice (won't erase everything)
    > Go to My Computer (windows xp) or Computer (windows vista & 7) and see if iDevice shows
    > Restore the iDevice completely (will erase everything)
    > Make sure the iTunes and/or iOS firmware is up-to-date.
    The ones I cross over is the ones you don't have to do. This should help

  • Why certain websites appeared to be a blank white page when im using my broadband connection but appeared to be okay when using other type of internet connection?

    the websites i used to surf turns out a blank white page when using certain internet connection

    Turns out to be an iPhone 4 problem. I went to a store and they replaced it. No problems now. My wife's iPhone 4 also had to be replaced which is disturbing. We had the original iPhone, iPhone 3G and iPhone 3GS without issue. This iPhone is not that good. It was emphasized to me the other day when I used a Razor in my house and found the voice quality infinitely superior and worked in places where my iPhone 4 failed completely (all on AT&T).
    People on the other end of calls with the Razor commented that my voice sounded much better and asked what had I done (they were used to the calls made with the iPhone).
    I am afraid I think that the iPhone 4 is not all it is cracked up to be. For phone use the Razor beats it hands down. Now, when it comes to email etc. the iPhone is infinitely superior but as a phone it is certainly not as good as it could be.
    I am afraid that Apple may have lost the magic recipe and, if I had not gone past the return date, the iPhone 4 would be going back.

  • Replacing an audio track without re-encoding the video

    I'm new to Audition CC so apologies for the basic question. I originally asked this in the Premiere Pro forum but I think it's more an Audition question..  I have AVCHD home video (MTS video with AC3 stereo audio) and have found I can clean up the audio, for example in speeches, very well in Audition. Is there a way to just replace the MTS's orginal audio track without re-encoding the video (which it seems I have to, if I do this via Premiere Pro)? In some cases the videos are poorly lit and any re-encoding makes them look noticeably worse than the original. In any event the video does not need re-encoding, I just need to replace the audio. Maybe I need to export the cleaned-up audio from Audition and use some other program to replace the audio in the original MTS file? Is that called re-muxing?  Thanks in advance for any help.

    Thanks Bob and Ryclark.
      Bob, our aim is to copy these videos onto USB sticks, for our family to watch on our various home TVs, from a media player such as WD Home TV, a media PC or a laptop via HDMI cable. I expect the original MTS files, with cleaned up audio, will be fine. Media Info shows these to be video: AVC format, variable bit rate, 16.0 max bit rate, 1920x1080 pixels, 25.000 fps, 8 bit, interlaced; audio: AC3 format, 256 Kbps bit rate, 2 channels, 48.0 KHz sampling rate, 16 bits bit depth. I'm keen to avoid re-encoding the video, and it seems I can. My initial test worked and tonight (I'm in Australia) I'll test further... I can edit the AC3 audio in Audition, export it as a new AC3 with the same format as original, then use some other non-Adobe program to replace the original audio track with the new one, without touching the video.
      Ryclark, I believe you are right. My novice-level understanding is that the process of separating the components of a video file such as my MTS file (video, audio and possibly others) into separate files is 'de-muxing' and putting them back together is re-muxing. Audition can save or export the original or edited audio track of my MTS file to a separate file so I assume that's like a specific audio de-mux. However I don't think Adobe products can re-mux without re-encoding the video (slow, larger resulting file size, worse video quality!), so I need some other program to replace my MTS file's audio with the new/edited audio.
      So far I've found the free-ware Avidemux can do it but past experience is that free-ware can be a bit flaky or over time not as bullet-proof as a good/proven commercial product, so I'll look a bit further - or does someone in this forum know of such a product? HD Video Converter seems to be an option but it looks a bit amateurish.
      By the way, if anyone is after a cut/join program to remove unwanted parts of a video without re-encoding the whole thing (ie. fast, same file size and unchanged video quality) I found Avidemux (free) only works on whole frames (GOP?) and the joins can have a little 'flick', whereas for $40-$50 a program like Fame Ring Smart Cutter for MTS videos (the Sony vidcam home video files I'm interested in) is frame accurate (it only re-encodes around the cut points) and works very well (smooth cut/join points). Smart Cutter doesn't do AVI videos (for my PC screen-recording videos) but I found SolveigMM Video Splitter Home Edition works well with those (not so well with my MTS files).

Maybe you are looking for